[PATCH 3/3] staging/fbtft: Remove flexfb

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



flexfb was an attempt to write a generic fbtft driver that was abandoned.
All the displays it supports are supported by other fbtft drivers.

Signed-off-by: Noralf Trønnes <noralf@xxxxxxxxxxx>
---
 drivers/staging/fbtft/Kconfig  |   6 -
 drivers/staging/fbtft/Makefile |   1 -
 drivers/staging/fbtft/flexfb.c | 851 ---------------------------------
 3 files changed, 858 deletions(-)
 delete mode 100644 drivers/staging/fbtft/flexfb.c

diff --git a/drivers/staging/fbtft/Kconfig b/drivers/staging/fbtft/Kconfig
index 4c37d087e25c..cb61c2a772bd 100644
--- a/drivers/staging/fbtft/Kconfig
+++ b/drivers/staging/fbtft/Kconfig
@@ -199,9 +199,3 @@ config FB_TFT_WATTEROTT
 	depends on FB_TFT
 	help
 	  Generic Framebuffer support for WATTEROTT
-
-config FB_FLEX
-	tristate "Generic FB driver for TFT LCD displays"
-	depends on FB_TFT
-	help
-	  Generic Framebuffer support for TFT LCD displays.
diff --git a/drivers/staging/fbtft/Makefile b/drivers/staging/fbtft/Makefile
index 925ec17e318d..27af43f32f81 100644
--- a/drivers/staging/fbtft/Makefile
+++ b/drivers/staging/fbtft/Makefile
@@ -36,4 +36,3 @@ obj-$(CONFIG_FB_TFT_UC1611)      += fb_uc1611.o
 obj-$(CONFIG_FB_TFT_UC1701)      += fb_uc1701.o
 obj-$(CONFIG_FB_TFT_UPD161704)   += fb_upd161704.o
 obj-$(CONFIG_FB_TFT_WATTEROTT)   += fb_watterott.o
-obj-$(CONFIG_FB_FLEX)            += flexfb.o
diff --git a/drivers/staging/fbtft/flexfb.c b/drivers/staging/fbtft/flexfb.c
deleted file mode 100644
index 3747321011fa..000000000000
--- a/drivers/staging/fbtft/flexfb.c
+++ /dev/null
@@ -1,851 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Generic FB driver for TFT LCD displays
- *
- * Copyright (C) 2013 Noralf Tronnes
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/vmalloc.h>
-#include <linux/gpio/consumer.h>
-#include <linux/spi/spi.h>
-#include <linux/delay.h>
-
-#include "fbtft.h"
-
-#define DRVNAME	    "flexfb"
-
-static char *chip;
-module_param(chip, charp, 0000);
-MODULE_PARM_DESC(chip, "LCD controller");
-
-static unsigned int width;
-module_param(width, uint, 0000);
-MODULE_PARM_DESC(width, "Display width");
-
-static unsigned int height;
-module_param(height, uint, 0000);
-MODULE_PARM_DESC(height, "Display height");
-
-static s16 init[512];
-static int init_num;
-module_param_array(init, short, &init_num, 0000);
-MODULE_PARM_DESC(init, "Init sequence");
-
-static unsigned int setaddrwin;
-module_param(setaddrwin, uint, 0000);
-MODULE_PARM_DESC(setaddrwin, "Which set_addr_win() implementation to use");
-
-static unsigned int buswidth = 8;
-module_param(buswidth, uint, 0000);
-MODULE_PARM_DESC(buswidth, "Width of databus (default: 8)");
-
-static unsigned int regwidth = 8;
-module_param(regwidth, uint, 0000);
-MODULE_PARM_DESC(regwidth, "Width of controller register (default: 8)");
-
-static bool nobacklight;
-module_param(nobacklight, bool, 0000);
-MODULE_PARM_DESC(nobacklight, "Turn off backlight functionality.");
-
-static bool latched;
-module_param(latched, bool, 0000);
-MODULE_PARM_DESC(latched, "Use with latched 16-bit databus");
-
-static const s16 *initp;
-static int initp_num;
-
-/* default init sequences */
-static const s16 st7735r_init[] = {
-	-1, 0x01,
-	-2, 150,
-	-1, 0x11,
-	-2, 500,
-	-1, 0xB1, 0x01, 0x2C, 0x2D,
-	-1, 0xB2, 0x01, 0x2C, 0x2D,
-	-1, 0xB3, 0x01, 0x2C, 0x2D, 0x01, 0x2C, 0x2D,
-	-1, 0xB4, 0x07,
-	-1, 0xC0, 0xA2, 0x02, 0x84,
-	-1, 0xC1, 0xC5,
-	-1, 0xC2, 0x0A, 0x00,
-	-1, 0xC3, 0x8A, 0x2A,
-	-1, 0xC4, 0x8A, 0xEE,
-	-1, 0xC5, 0x0E,
-	-1, 0x20,
-	-1, 0x36, 0xC0,
-	-1, 0x3A, 0x05,
-	-1, 0xE0, 0x0f, 0x1a, 0x0f, 0x18, 0x2f, 0x28, 0x20, 0x22,
-	    0x1f, 0x1b, 0x23, 0x37, 0x00, 0x07, 0x02, 0x10,
-	-1, 0xE1, 0x0f, 0x1b, 0x0f, 0x17, 0x33, 0x2c, 0x29, 0x2e,
-	    0x30, 0x30, 0x39, 0x3f, 0x00, 0x07, 0x03, 0x10,
-	-1, 0x29,
-	-2, 100,
-	-1, 0x13,
-	-2, 10,
-	-3
-};
-
-static const s16 ssd1289_init[] = {
-	-1, 0x00, 0x0001,
-	-1, 0x03, 0xA8A4,
-	-1, 0x0C, 0x0000,
-	-1, 0x0D, 0x080C,
-	-1, 0x0E, 0x2B00,
-	-1, 0x1E, 0x00B7,
-	-1, 0x01, 0x2B3F,
-	-1, 0x02, 0x0600,
-	-1, 0x10, 0x0000,
-	-1, 0x11, 0x6070,
-	-1, 0x05, 0x0000,
-	-1, 0x06, 0x0000,
-	-1, 0x16, 0xEF1C,
-	-1, 0x17, 0x0003,
-	-1, 0x07, 0x0233,
-	-1, 0x0B, 0x0000,
-	-1, 0x0F, 0x0000,
-	-1, 0x41, 0x0000,
-	-1, 0x42, 0x0000,
-	-1, 0x48, 0x0000,
-	-1, 0x49, 0x013F,
-	-1, 0x4A, 0x0000,
-	-1, 0x4B, 0x0000,
-	-1, 0x44, 0xEF00,
-	-1, 0x45, 0x0000,
-	-1, 0x46, 0x013F,
-	-1, 0x30, 0x0707,
-	-1, 0x31, 0x0204,
-	-1, 0x32, 0x0204,
-	-1, 0x33, 0x0502,
-	-1, 0x34, 0x0507,
-	-1, 0x35, 0x0204,
-	-1, 0x36, 0x0204,
-	-1, 0x37, 0x0502,
-	-1, 0x3A, 0x0302,
-	-1, 0x3B, 0x0302,
-	-1, 0x23, 0x0000,
-	-1, 0x24, 0x0000,
-	-1, 0x25, 0x8000,
-	-1, 0x4f, 0x0000,
-	-1, 0x4e, 0x0000,
-	-1, 0x22,
-	-3
-};
-
-static const s16 hx8340bn_init[] = {
-	-1, 0xC1, 0xFF, 0x83, 0x40,
-	-1, 0x11,
-	-2, 150,
-	-1, 0xCA, 0x70, 0x00, 0xD9,
-	-1, 0xB0, 0x01, 0x11,
-	-1, 0xC9, 0x90, 0x49, 0x10, 0x28, 0x28, 0x10, 0x00, 0x06,
-	-2, 20,
-	-1, 0xC2, 0x60, 0x71, 0x01, 0x0E, 0x05, 0x02, 0x09, 0x31, 0x0A,
-	-1, 0xC3, 0x67, 0x30, 0x61, 0x17, 0x48, 0x07, 0x05, 0x33,
-	-2, 10,
-	-1, 0xB5, 0x35, 0x20, 0x45,
-	-1, 0xB4, 0x33, 0x25, 0x4C,
-	-2, 10,
-	-1, 0x3A, 0x05,
-	-1, 0x29,
-	-2, 10,
-	-3
-};
-
-static const s16 ili9225_init[] = {
-	-1, 0x0001, 0x011C,
-	-1, 0x0002, 0x0100,
-	-1, 0x0003, 0x1030,
-	-1, 0x0008, 0x0808,
-	-1, 0x000C, 0x0000,
-	-1, 0x000F, 0x0A01,
-	-1, 0x0020, 0x0000,
-	-1, 0x0021, 0x0000,
-	-2, 50,
-	-1, 0x0010, 0x0A00,
-	-1, 0x0011, 0x1038,
-	-2, 50,
-	-1, 0x0012, 0x1121,
-	-1, 0x0013, 0x004E,
-	-1, 0x0014, 0x676F,
-	-1, 0x0030, 0x0000,
-	-1, 0x0031, 0x00DB,
-	-1, 0x0032, 0x0000,
-	-1, 0x0033, 0x0000,
-	-1, 0x0034, 0x00DB,
-	-1, 0x0035, 0x0000,
-	-1, 0x0036, 0x00AF,
-	-1, 0x0037, 0x0000,
-	-1, 0x0038, 0x00DB,
-	-1, 0x0039, 0x0000,
-	-1, 0x0050, 0x0000,
-	-1, 0x0051, 0x060A,
-	-1, 0x0052, 0x0D0A,
-	-1, 0x0053, 0x0303,
-	-1, 0x0054, 0x0A0D,
-	-1, 0x0055, 0x0A06,
-	-1, 0x0056, 0x0000,
-	-1, 0x0057, 0x0303,
-	-1, 0x0058, 0x0000,
-	-1, 0x0059, 0x0000,
-	-2, 50,
-	-1, 0x0007, 0x1017,
-	-2, 50,
-	-3
-};
-
-static const s16 ili9320_init[] = {
-	-1, 0x00E5, 0x8000,
-	-1, 0x0000, 0x0001,
-	-1, 0x0001, 0x0100,
-	-1, 0x0002, 0x0700,
-	-1, 0x0003, 0x1030,
-	-1, 0x0004, 0x0000,
-	-1, 0x0008, 0x0202,
-	-1, 0x0009, 0x0000,
-	-1, 0x000A, 0x0000,
-	-1, 0x000C, 0x0000,
-	-1, 0x000D, 0x0000,
-	-1, 0x000F, 0x0000,
-	-1, 0x0010, 0x0000,
-	-1, 0x0011, 0x0007,
-	-1, 0x0012, 0x0000,
-	-1, 0x0013, 0x0000,
-	-2, 200,
-	-1, 0x0010, 0x17B0,
-	-1, 0x0011, 0x0031,
-	-2, 50,
-	-1, 0x0012, 0x0138,
-	-2, 50,
-	-1, 0x0013, 0x1800,
-	-1, 0x0029, 0x0008,
-	-2, 50,
-	-1, 0x0020, 0x0000,
-	-1, 0x0021, 0x0000,
-	-1, 0x0030, 0x0000,
-	-1, 0x0031, 0x0505,
-	-1, 0x0032, 0x0004,
-	-1, 0x0035, 0x0006,
-	-1, 0x0036, 0x0707,
-	-1, 0x0037, 0x0105,
-	-1, 0x0038, 0x0002,
-	-1, 0x0039, 0x0707,
-	-1, 0x003C, 0x0704,
-	-1, 0x003D, 0x0807,
-	-1, 0x0050, 0x0000,
-	-1, 0x0051, 0x00EF,
-	-1, 0x0052, 0x0000,
-	-1, 0x0053, 0x013F,
-	-1, 0x0060, 0x2700,
-	-1, 0x0061, 0x0001,
-	-1, 0x006A, 0x0000,
-	-1, 0x0080, 0x0000,
-	-1, 0x0081, 0x0000,
-	-1, 0x0082, 0x0000,
-	-1, 0x0083, 0x0000,
-	-1, 0x0084, 0x0000,
-	-1, 0x0085, 0x0000,
-	-1, 0x0090, 0x0010,
-	-1, 0x0092, 0x0000,
-	-1, 0x0093, 0x0003,
-	-1, 0x0095, 0x0110,
-	-1, 0x0097, 0x0000,
-	-1, 0x0098, 0x0000,
-	-1, 0x0007, 0x0173,
-	-3
-};
-
-static const s16 ili9325_init[] = {
-	-1, 0x00E3, 0x3008,
-	-1, 0x00E7, 0x0012,
-	-1, 0x00EF, 0x1231,
-	-1, 0x0001, 0x0100,
-	-1, 0x0002, 0x0700,
-	-1, 0x0003, 0x1030,
-	-1, 0x0004, 0x0000,
-	-1, 0x0008, 0x0207,
-	-1, 0x0009, 0x0000,
-	-1, 0x000A, 0x0000,
-	-1, 0x000C, 0x0000,
-	-1, 0x000D, 0x0000,
-	-1, 0x000F, 0x0000,
-	-1, 0x0010, 0x0000,
-	-1, 0x0011, 0x0007,
-	-1, 0x0012, 0x0000,
-	-1, 0x0013, 0x0000,
-	-2, 200,
-	-1, 0x0010, 0x1690,
-	-1, 0x0011, 0x0223,
-	-2, 50,
-	-1, 0x0012, 0x000D,
-	-2, 50,
-	-1, 0x0013, 0x1200,
-	-1, 0x0029, 0x000A,
-	-1, 0x002B, 0x000C,
-	-2, 50,
-	-1, 0x0020, 0x0000,
-	-1, 0x0021, 0x0000,
-	-1, 0x0030, 0x0000,
-	-1, 0x0031, 0x0506,
-	-1, 0x0032, 0x0104,
-	-1, 0x0035, 0x0207,
-	-1, 0x0036, 0x000F,
-	-1, 0x0037, 0x0306,
-	-1, 0x0038, 0x0102,
-	-1, 0x0039, 0x0707,
-	-1, 0x003C, 0x0702,
-	-1, 0x003D, 0x1604,
-	-1, 0x0050, 0x0000,
-	-1, 0x0051, 0x00EF,
-	-1, 0x0052, 0x0000,
-	-1, 0x0053, 0x013F,
-	-1, 0x0060, 0xA700,
-	-1, 0x0061, 0x0001,
-	-1, 0x006A, 0x0000,
-	-1, 0x0080, 0x0000,
-	-1, 0x0081, 0x0000,
-	-1, 0x0082, 0x0000,
-	-1, 0x0083, 0x0000,
-	-1, 0x0084, 0x0000,
-	-1, 0x0085, 0x0000,
-	-1, 0x0090, 0x0010,
-	-1, 0x0092, 0x0600,
-	-1, 0x0007, 0x0133,
-	-3
-};
-
-static const s16 ili9341_init[] = {
-	-1, 0x28,
-	-2, 20,
-	-1, 0xCF, 0x00, 0x83, 0x30,
-	-1, 0xED, 0x64, 0x03, 0x12, 0x81,
-	-1, 0xE8, 0x85, 0x01, 0x79,
-	-1, 0xCB, 0x39, 0x2c, 0x00, 0x34, 0x02,
-	-1, 0xF7, 0x20,
-	-1, 0xEA, 0x00, 0x00,
-	-1, 0xC0, 0x26,
-	-1, 0xC1, 0x11,
-	-1, 0xC5, 0x35, 0x3E,
-	-1, 0xC7, 0xBE,
-	-1, 0xB1, 0x00, 0x1B,
-	-1, 0xB6, 0x0a, 0x82, 0x27, 0x00,
-	-1, 0xB7, 0x07,
-	-1, 0x3A, 0x55,
-	-1, 0x36, 0x48,
-	-1, 0x11,
-	-2, 120,
-	-1, 0x29,
-	-2, 20,
-	-3
-};
-
-static const s16 ssd1351_init[] = {
-	-1, 0xfd, 0x12,
-	-1, 0xfd, 0xb1,
-	-1, 0xae,
-	-1, 0xb3, 0xf1,
-	-1, 0xca, 0x7f,
-	-1, 0xa0, 0x74,
-	-1, 0x15, 0x00, 0x7f,
-	-1, 0x75, 0x00, 0x7f,
-	-1, 0xa1, 0x00,
-	-1, 0xa2, 0x00,
-	-1, 0xb5, 0x00,
-	-1, 0xab, 0x01,
-	-1, 0xb1, 0x32,
-	-1, 0xb4, 0xa0, 0xb5, 0x55,
-	-1, 0xbb, 0x17,
-	-1, 0xbe, 0x05,
-	-1, 0xc1, 0xc8, 0x80, 0xc8,
-	-1, 0xc7, 0x0f,
-	-1, 0xb6, 0x01,
-	-1, 0xa6,
-	-1, 0xaf,
-	-3
-};
-
-/**
- * struct flexfb_lcd_controller - Describes the LCD controller properties
- * @name: Model name of the chip
- * @width: Width of display in pixels
- * @height: Height of display in pixels
- * @setaddrwin: Which set_addr_win() implementation to use
- * @regwidth: LCD Controller Register width in bits
- * @init_seq: LCD initialization sequence
- * @init_seq_sz: Size of LCD initialization sequence
- */
-struct flexfb_lcd_controller {
-	const char *name;
-	unsigned int width;
-	unsigned int height;
-	unsigned int setaddrwin;
-	unsigned int regwidth;
-	const s16 *init_seq;
-	int init_seq_sz;
-};
-
-static const struct flexfb_lcd_controller flexfb_chip_table[] = {
-	{
-		.name = "st7735r",
-		.width = 120,
-		.height = 160,
-		.init_seq = st7735r_init,
-		.init_seq_sz = ARRAY_SIZE(st7735r_init),
-	},
-	{
-		.name = "hx8340bn",
-		.width = 176,
-		.height = 220,
-		.init_seq = hx8340bn_init,
-		.init_seq_sz = ARRAY_SIZE(hx8340bn_init),
-	},
-	{
-		.name = "ili9225",
-		.width = 176,
-		.height = 220,
-		.regwidth = 16,
-		.init_seq = ili9225_init,
-		.init_seq_sz = ARRAY_SIZE(ili9225_init),
-	},
-	{
-		.name = "ili9320",
-		.width = 240,
-		.height = 320,
-		.setaddrwin = 1,
-		.regwidth = 16,
-		.init_seq = ili9320_init,
-		.init_seq_sz = ARRAY_SIZE(ili9320_init),
-	},
-	{
-		.name = "ili9325",
-		.width = 240,
-		.height = 320,
-		.setaddrwin = 1,
-		.regwidth = 16,
-		.init_seq = ili9325_init,
-		.init_seq_sz = ARRAY_SIZE(ili9325_init),
-	},
-	{
-		.name = "ili9341",
-		.width = 240,
-		.height = 320,
-		.init_seq = ili9341_init,
-		.init_seq_sz = ARRAY_SIZE(ili9341_init),
-	},
-	{
-		.name = "ssd1289",
-		.width = 240,
-		.height = 320,
-		.setaddrwin = 2,
-		.regwidth = 16,
-		.init_seq = ssd1289_init,
-		.init_seq_sz = ARRAY_SIZE(ssd1289_init),
-	},
-	{
-		.name = "ssd1351",
-		.width = 128,
-		.height = 128,
-		.setaddrwin = 3,
-		.init_seq = ssd1351_init,
-		.init_seq_sz = ARRAY_SIZE(ssd1351_init),
-	},
-};
-
-/* ili9320, ili9325 */
-static void flexfb_set_addr_win_1(struct fbtft_par *par,
-				  int xs, int ys, int xe, int ye)
-{
-	switch (par->info->var.rotate) {
-	/* R20h = Horizontal GRAM Start Address */
-	/* R21h = Vertical GRAM Start Address */
-	case 0:
-		write_reg(par, 0x0020, xs);
-		write_reg(par, 0x0021, ys);
-		break;
-	case 180:
-		write_reg(par, 0x0020, width - 1 - xs);
-		write_reg(par, 0x0021, height - 1 - ys);
-		break;
-	case 270:
-		write_reg(par, 0x0020, width - 1 - ys);
-		write_reg(par, 0x0021, xs);
-		break;
-	case 90:
-		write_reg(par, 0x0020, ys);
-		write_reg(par, 0x0021, height - 1 - xs);
-		break;
-	}
-	write_reg(par, 0x0022); /* Write Data to GRAM */
-}
-
-/* ssd1289 */
-static void flexfb_set_addr_win_2(struct fbtft_par *par,
-				  int xs, int ys, int xe, int ye)
-{
-	switch (par->info->var.rotate) {
-	/* R4Eh - Set GDDRAM X address counter */
-	/* R4Fh - Set GDDRAM Y address counter */
-	case 0:
-		write_reg(par, 0x4e, xs);
-		write_reg(par, 0x4f, ys);
-		break;
-	case 180:
-		write_reg(par, 0x4e, par->info->var.xres - 1 - xs);
-		write_reg(par, 0x4f, par->info->var.yres - 1 - ys);
-		break;
-	case 270:
-		write_reg(par, 0x4e, par->info->var.yres - 1 - ys);
-		write_reg(par, 0x4f, xs);
-		break;
-	case 90:
-		write_reg(par, 0x4e, ys);
-		write_reg(par, 0x4f, par->info->var.xres - 1 - xs);
-		break;
-	}
-
-	/* R22h - RAM data write */
-	write_reg(par, 0x22, 0);
-}
-
-/* ssd1351 */
-static void set_addr_win_3(struct fbtft_par *par,
-			   int xs, int ys, int xe, int ye)
-{
-	write_reg(par, 0x15, xs, xe);
-	write_reg(par, 0x75, ys, ye);
-	write_reg(par, 0x5C);
-}
-
-static int flexfb_verify_gpios_dc(struct fbtft_par *par)
-{
-	fbtft_par_dbg(DEBUG_VERIFY_GPIOS, par, "%s()\n", __func__);
-
-	if (!par->gpio.dc) {
-		dev_err(par->info->device,
-			"Missing info about 'dc' gpio. Aborting.\n");
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static int flexfb_verify_gpios_db(struct fbtft_par *par)
-{
-	int i;
-	int num_db = buswidth;
-
-	fbtft_par_dbg(DEBUG_VERIFY_GPIOS, par, "%s()\n", __func__);
-
-	if (!par->gpio.dc) {
-		dev_err(par->info->device, "Missing info about 'dc' gpio. Aborting.\n");
-		return -EINVAL;
-	}
-	if (!par->gpio.wr) {
-		dev_err(par->info->device, "Missing info about 'wr' gpio. Aborting.\n");
-		return -EINVAL;
-	}
-	if (latched && !par->gpio.latch) {
-		dev_err(par->info->device, "Missing info about 'latch' gpio. Aborting.\n");
-		return -EINVAL;
-	}
-	if (latched)
-		num_db = buswidth / 2;
-	for (i = 0; i < num_db; i++) {
-		if (!par->gpio.db[i]) {
-			dev_err(par->info->device,
-				"Missing info about 'db%02d' gpio. Aborting.\n",
-				i);
-			return -EINVAL;
-		}
-	}
-
-	return 0;
-}
-
-static void flexfb_chip_load_param(const struct flexfb_lcd_controller *chip)
-{
-	if (!width)
-		width = chip->width;
-	if (!height)
-		height = chip->height;
-	setaddrwin = chip->setaddrwin;
-	if (chip->regwidth)
-		regwidth = chip->regwidth;
-	if (!init_num) {
-		initp = chip->init_seq;
-		initp_num = chip->init_seq_sz;
-	}
-}
-
-static struct fbtft_display flex_display = { };
-
-static int flexfb_chip_init(const struct device *dev)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(flexfb_chip_table); i++)
-		if (!strcmp(chip, flexfb_chip_table[i].name)) {
-			flexfb_chip_load_param(&flexfb_chip_table[i]);
-			return 0;
-		}
-
-	dev_err(dev, "chip=%s is not supported\n", chip);
-
-	return -EINVAL;
-}
-
-static int flexfb_probe_common(struct spi_device *sdev,
-			       struct platform_device *pdev)
-{
-	struct device *dev;
-	struct fb_info *info;
-	struct fbtft_par *par;
-	int ret;
-
-	initp = init;
-	initp_num = init_num;
-
-	if (sdev)
-		dev = &sdev->dev;
-	else
-		dev = &pdev->dev;
-
-	fbtft_init_dbg(dev, "%s(%s)\n", __func__,
-		       sdev ? "'SPI device'" : "'Platform device'");
-
-	if (chip) {
-		ret = flexfb_chip_init(dev);
-		if (ret)
-			return ret;
-	}
-
-	if (width == 0 || height == 0) {
-		dev_err(dev, "argument(s) missing: width and height has to be set.\n");
-		return -EINVAL;
-	}
-	flex_display.width = width;
-	flex_display.height = height;
-	fbtft_init_dbg(dev, "Display resolution: %dx%d\n", width, height);
-	fbtft_init_dbg(dev, "chip = %s\n", chip ? chip : "not set");
-	fbtft_init_dbg(dev, "setaddrwin = %d\n", setaddrwin);
-	fbtft_init_dbg(dev, "regwidth = %d\n", regwidth);
-	fbtft_init_dbg(dev, "buswidth = %d\n", buswidth);
-
-	info = fbtft_framebuffer_alloc(&flex_display, dev, dev->platform_data);
-	if (!info)
-		return -ENOMEM;
-
-	par = info->par;
-	if (sdev)
-		par->spi = sdev;
-	else
-		par->pdev = pdev;
-	if (!par->init_sequence)
-		par->init_sequence = initp;
-	par->fbtftops.init_display = fbtft_init_display;
-
-	/* registerwrite functions */
-	switch (regwidth) {
-	case 8:
-		par->fbtftops.write_register = fbtft_write_reg8_bus8;
-		break;
-	case 16:
-		par->fbtftops.write_register = fbtft_write_reg16_bus8;
-		break;
-	default:
-		dev_err(dev,
-			"argument 'regwidth': %d is not supported.\n",
-			regwidth);
-		return -EINVAL;
-	}
-
-	/* bus functions */
-	if (sdev) {
-		par->fbtftops.write = fbtft_write_spi;
-		switch (buswidth) {
-		case 8:
-			par->fbtftops.write_vmem = fbtft_write_vmem16_bus8;
-			if (!par->startbyte)
-				par->fbtftops.verify_gpios = flexfb_verify_gpios_dc;
-			break;
-		case 9:
-			if (regwidth == 16) {
-				dev_err(dev, "argument 'regwidth': %d is not supported with buswidth=%d and SPI.\n",
-					regwidth, buswidth);
-				return -EINVAL;
-			}
-			par->fbtftops.write_register = fbtft_write_reg8_bus9;
-			par->fbtftops.write_vmem = fbtft_write_vmem16_bus9;
-			if (par->spi->master->bits_per_word_mask
-			    & SPI_BPW_MASK(9)) {
-				par->spi->bits_per_word = 9;
-				break;
-			}
-
-			dev_warn(dev,
-				 "9-bit SPI not available, emulating using 8-bit.\n");
-			/* allocate buffer with room for dc bits */
-			par->extra = devm_kzalloc(par->info->device,
-						  par->txbuf.len
-						  + (par->txbuf.len / 8) + 8,
-						  GFP_KERNEL);
-			if (!par->extra) {
-				ret = -ENOMEM;
-				goto out_release;
-			}
-			par->fbtftops.write = fbtft_write_spi_emulate_9;
-
-			break;
-		default:
-			dev_err(dev,
-				"argument 'buswidth': %d is not supported with SPI.\n",
-				buswidth);
-			return -EINVAL;
-		}
-	} else {
-		par->fbtftops.verify_gpios = flexfb_verify_gpios_db;
-		switch (buswidth) {
-		case 8:
-			par->fbtftops.write = fbtft_write_gpio8_wr;
-			par->fbtftops.write_vmem = fbtft_write_vmem16_bus8;
-			break;
-		case 16:
-			par->fbtftops.write_register = fbtft_write_reg16_bus16;
-			if (latched)
-				par->fbtftops.write = fbtft_write_gpio16_wr_latched;
-			else
-				par->fbtftops.write = fbtft_write_gpio16_wr;
-			par->fbtftops.write_vmem = fbtft_write_vmem16_bus16;
-			break;
-		default:
-			dev_err(dev,
-				"argument 'buswidth': %d is not supported with parallel.\n",
-				buswidth);
-			return -EINVAL;
-		}
-	}
-
-	/* set_addr_win function */
-	switch (setaddrwin) {
-	case 0:
-		/* use default */
-		break;
-	case 1:
-		par->fbtftops.set_addr_win = flexfb_set_addr_win_1;
-		break;
-	case 2:
-		par->fbtftops.set_addr_win = flexfb_set_addr_win_2;
-		break;
-	case 3:
-		par->fbtftops.set_addr_win = set_addr_win_3;
-		break;
-	default:
-		dev_err(dev, "argument 'setaddrwin': unknown value %d.\n",
-			setaddrwin);
-		return -EINVAL;
-	}
-
-	if (!nobacklight)
-		par->fbtftops.register_backlight = fbtft_register_backlight;
-
-	ret = fbtft_register_framebuffer(info);
-	if (ret < 0)
-		goto out_release;
-
-	return 0;
-
-out_release:
-	fbtft_framebuffer_release(info);
-
-	return ret;
-}
-
-static int flexfb_remove_common(struct device *dev, struct fb_info *info)
-{
-	struct fbtft_par *par;
-
-	if (!info)
-		return -EINVAL;
-	par = info->par;
-	if (par)
-		fbtft_par_dbg(DEBUG_DRIVER_INIT_FUNCTIONS, par, "%s()\n",
-			      __func__);
-	fbtft_unregister_framebuffer(info);
-	fbtft_framebuffer_release(info);
-
-	return 0;
-}
-
-static int flexfb_probe_spi(struct spi_device *spi)
-{
-	return flexfb_probe_common(spi, NULL);
-}
-
-static int flexfb_remove_spi(struct spi_device *spi)
-{
-	struct fb_info *info = spi_get_drvdata(spi);
-
-	return flexfb_remove_common(&spi->dev, info);
-}
-
-static int flexfb_probe_pdev(struct platform_device *pdev)
-{
-	return flexfb_probe_common(NULL, pdev);
-}
-
-static int flexfb_remove_pdev(struct platform_device *pdev)
-{
-	struct fb_info *info = platform_get_drvdata(pdev);
-
-	return flexfb_remove_common(&pdev->dev, info);
-}
-
-static struct spi_driver flexfb_spi_driver = {
-	.driver = {
-		.name   = DRVNAME,
-	},
-	.probe  = flexfb_probe_spi,
-	.remove = flexfb_remove_spi,
-};
-
-static const struct platform_device_id flexfb_platform_ids[] = {
-	{ "flexpfb", 0 },
-	{ },
-};
-MODULE_DEVICE_TABLE(platform, flexfb_platform_ids);
-
-static struct platform_driver flexfb_platform_driver = {
-	.driver = {
-		.name   = DRVNAME,
-	},
-	.id_table = flexfb_platform_ids,
-	.probe  = flexfb_probe_pdev,
-	.remove = flexfb_remove_pdev,
-};
-
-static int __init flexfb_init(void)
-{
-	int ret, ret2;
-
-	ret = spi_register_driver(&flexfb_spi_driver);
-	ret2 = platform_driver_register(&flexfb_platform_driver);
-	if (ret < 0)
-		return ret;
-	return ret2;
-}
-
-static void __exit flexfb_exit(void)
-{
-	spi_unregister_driver(&flexfb_spi_driver);
-	platform_driver_unregister(&flexfb_platform_driver);
-}
-
-/* ------------------------------------------------------------------------- */
-
-module_init(flexfb_init);
-module_exit(flexfb_exit);
-
-MODULE_DESCRIPTION("Generic FB driver for TFT LCD displays");
-MODULE_AUTHOR("Noralf Tronnes");
-MODULE_LICENSE("GPL");
-- 
2.20.1

_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel




[Index of Archives]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux