From: Alan Cox <alan@xxxxxxxxxxxxxxxxxx>
Remove all sorts of bits we can get rid of. We are now a very simple KMS
driver relying on the stolen memory for our framebuffer base (which is for
the moment hardcoded).
To support multiple frame buffers and some accel bits we will need some kind
of memory allocator, possibly a minimal use of GEM.
Signed-off-by: Alan Cox <alan@xxxxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxx>
---
drivers/staging/gma500/psb_bl.c | 10 +-
drivers/staging/gma500/psb_drm.h | 507 ++++++----------------------
drivers/staging/gma500/psb_drv.c | 55 +---
drivers/staging/gma500/psb_drv.h | 1 -
drivers/staging/gma500/psb_intel_bios.c | 2 +-
drivers/staging/gma500/psb_intel_bios.h | 2 +-
drivers/staging/gma500/psb_intel_reg.h | 551 ++++++++++++++-----------------
drivers/staging/gma500/psb_irq.c | 4 +-
drivers/staging/gma500/psb_powermgmt.c | 5 -
9 files changed, 365 insertions(+), 772 deletions(-)
diff --git a/drivers/staging/gma500/psb_bl.c b/drivers/staging/gma500/psb_bl.c
index 52edb43..70c17b3 100644
--- a/drivers/staging/gma500/psb_bl.c
+++ b/drivers/staging/gma500/psb_bl.c
@@ -1,5 +1,5 @@
/*
- * psb backlight using HAL
+ * psb backlight interface
*
* Copyright (c) 2009, Intel Corporation.
*
@@ -73,6 +73,8 @@ int psb_get_brightness(struct backlight_device *bd)
DRM_DEBUG_DRIVER("brightness = 0x%x\n", psb_brightness);
/* return locally cached var instead of HW read (due to DPST etc.) */
+ /* FIXME: ideally return actual value in case firmware fiddled with
+ it */
return psb_brightness;
}
@@ -83,7 +85,7 @@ static const struct backlight_ops psb_ops = {
static int device_backlight_init(struct drm_device *dev)
{
- unsigned long CoreClock;
+ unsigned long core_clock;
/* u32 bl_max_freq; */
/* unsigned long value; */
u16 bl_max_freq;
@@ -102,9 +104,9 @@ static int device_backlight_init(struct drm_device *dev)
blc_brightnesscmd = dev_priv->lvds_bl->brightnesscmd;
blc_type = dev_priv->lvds_bl->type;
- CoreClock = dev_priv->core_freq;
+ core_clock = dev_priv->core_freq;
- value = (CoreClock * MHz) / BLC_PWM_FREQ_CALC_CONSTANT;
+ value = (core_clock * MHz) / BLC_PWM_FREQ_CALC_CONSTANT;
value *= blc_pwm_precision_factor;
value /= bl_max_freq;
value /= blc_pwm_precision_factor;
diff --git a/drivers/staging/gma500/psb_drm.h b/drivers/staging/gma500/psb_drm.h
index ef5fcd0..fb9b424 100644
--- a/drivers/staging/gma500/psb_drm.h
+++ b/drivers/staging/gma500/psb_drm.h
@@ -31,17 +31,6 @@
#include "psb_ttm_fence_user.h"
#include "psb_ttm_placement_user.h"
-/*
- * Menlow/MRST graphics driver package version
- * a.b.c.xxxx
- * a - Product Family: 5 - Linux
- * b - Major Release Version: 0 - non-Gallium (Unbuntu);
- * 1 - Gallium (Moblin2)
- * c - Hotfix Release
- * xxxx - Graphics internal build #
- */
-#define PSB_PACKAGE_VERSION "5.3.0.32L.0036"
-
#define DRM_PSB_SAREA_MAJOR 0
#define DRM_PSB_SAREA_MINOR 2
#define PSB_FIXED_SHIFT 16
@@ -52,24 +41,24 @@
* Public memory types.
*/
-#define DRM_PSB_MEM_MMU TTM_PL_PRIV1
-#define DRM_PSB_FLAG_MEM_MMU TTM_PL_FLAG_PRIV1
+#define DRM_PSB_MEM_MMU TTM_PL_PRIV1
+#define DRM_PSB_FLAG_MEM_MMU TTM_PL_FLAG_PRIV1
#define TTM_PL_CI TTM_PL_PRIV0
#define TTM_PL_FLAG_CI TTM_PL_FLAG_PRIV0
-#define TTM_PL_RAR TTM_PL_PRIV2
-#define TTM_PL_FLAG_RAR TTM_PL_FLAG_PRIV2
+#define TTM_PL_RAR TTM_PL_PRIV2
+#define TTM_PL_FLAG_RAR TTM_PL_FLAG_PRIV2
-typedef int32_t psb_fixed;
-typedef uint32_t psb_ufixed;
+typedef s32 psb_fixed;
+typedef u32 psb_ufixed;
-static inline int32_t psb_int_to_fixed(int a)
+static inline s32 psb_int_to_fixed(int a)
{
return a * (1 << PSB_FIXED_SHIFT);
}
-static inline uint32_t psb_unsigned_to_ufixed(unsigned int a)
+static inline u32 psb_unsigned_to_ufixed(unsigned int a)
{
return a << PSB_FIXED_SHIFT;
}
@@ -82,13 +71,13 @@ typedef enum {
} drm_cmd_status_t;
struct drm_psb_scanout {
- uint32_t buffer_id; /* DRM buffer object ID */
- uint32_t rotation; /* Rotation as in RR_rotation definitions */
- uint32_t stride; /* Buffer stride in bytes */
- uint32_t depth; /* Buffer depth in bits (NOT) bpp */
- uint32_t width; /* Buffer width in pixels */
- uint32_t height; /* Buffer height in lines */
- int32_t transform[3][3]; /* Buffer composite transform */
+ u32 buffer_id; /* DRM buffer object ID */
+ u32 rotation; /* Rotation as in RR_rotation definitions */
+ u32 stride; /* Buffer stride in bytes */
+ u32 depth; /* Buffer depth in bits (NOT) bpp */
+ u32 width; /* Buffer width in pixels */
+ u32 height; /* Buffer height in lines */
+ s32 transform[3][3]; /* Buffer composite transform */
/* (scaling, rot, reflect) */
};
@@ -101,14 +90,14 @@ struct drm_psb_scanout {
struct drm_psb_sarea {
/* Track changes of this data structure */
- uint32_t major;
- uint32_t minor;
+ u32 major;
+ u32 minor;
/* Last context to touch part of hw */
- uint32_t ctx_owners[DRM_PSB_SAREA_OWNERS];
+ u32 ctx_owners[DRM_PSB_SAREA_OWNERS];
/* Definition of front- and rotated buffers */
- uint32_t num_scanouts;
+ u32 num_scanouts;
struct drm_psb_scanout scanouts[DRM_PSB_SAREA_SCANOUTS];
int planeA_x;
@@ -120,7 +109,7 @@ struct drm_psb_sarea {
int planeB_w;
int planeB_h;
/* Number of active scanouts */
- uint32_t num_active_scanouts;
+ u32 num_active_scanouts;
};
#define PSB_RELOC_MAGIC 0x67676767
@@ -134,16 +123,16 @@ struct drm_psb_sarea {
*/
struct drm_psb_reloc {
- uint32_t reloc_op;
- uint32_t where; /* offset in destination buffer */
- uint32_t buffer; /* Buffer reloc applies to */
- uint32_t mask; /* Destination format: */
- uint32_t shift; /* Destination format: */
- uint32_t pre_add; /* Destination format: */
- uint32_t background; /* Destination add */
- uint32_t dst_buffer; /* Destination buffer. Index into buffer_list */
- uint32_t arg0; /* Reloc-op dependant */
- uint32_t arg1;
+ u32 reloc_op;
+ u32 where; /* offset in destination buffer */
+ u32 buffer; /* Buffer reloc applies to */
+ u32 mask; /* Destination format: */
+ u32 shift; /* Destination format: */
+ u32 pre_add; /* Destination format: */
+ u32 background; /* Destination add */
+ u32 dst_buffer; /* Destination buffer. Index into buffer_list */
+ u32 arg0; /* Reloc-op dependant */
+ u32 arg1;
};
@@ -174,12 +163,12 @@ struct drm_psb_reloc {
#define PSB_FEEDBACK_OP_VISTEST (1 << 0)
struct drm_psb_extension_rep {
- int32_t exists;
- uint32_t driver_ioctl_offset;
- uint32_t sarea_offset;
- uint32_t major;
- uint32_t minor;
- uint32_t pl;
+ s32 exists;
+ u32 driver_ioctl_offset;
+ u32 sarea_offset;
+ u32 major;
+ u32 minor;
+ u32 pl;
};
#define DRM_PSB_EXT_NAME_LEN 128
@@ -190,20 +179,20 @@ union drm_psb_extension_arg {
};
struct psb_validate_req {
- uint64_t set_flags;
- uint64_t clear_flags;
- uint64_t next;
- uint64_t presumed_gpu_offset;
- uint32_t buffer_handle;
- uint32_t presumed_flags;
- uint32_t group;
- uint32_t pad64;
+ u64 set_flags;
+ u64 clear_flags;
+ u64 next;
+ u64 presumed_gpu_offset;
+ u32 buffer_handle;
+ u32 presumed_flags;
+ u32 group;
+ u32 pad64;
};
struct psb_validate_rep {
- uint64_t gpu_offset;
- uint32_t placement;
- uint32_t fence_type_mask;
+ u64 gpu_offset;
+ u32 placement;
+ u32 fence_type_mask;
};
#define PSB_USE_PRESUMED (1 << 0)
@@ -221,102 +210,24 @@ struct psb_validate_arg {
#define DRM_PSB_FENCE_NO_USER (1 << 0)
struct psb_ttm_fence_rep {
- uint32_t handle;
- uint32_t fence_class;
- uint32_t fence_type;
- uint32_t signaled_types;
- uint32_t error;
+ u32 handle;
+ u32 fence_class;
+ u32 fence_type;
+ u32 signaled_types;
+ u32 error;
};
-typedef struct drm_psb_cmdbuf_arg {
- uint64_t buffer_list; /* List of buffers to validate */
- uint64_t clip_rects; /* See i915 counterpart */
- uint64_t scene_arg;
- uint64_t fence_arg;
-
- uint32_t ta_flags;
-
- uint32_t ta_handle; /* TA reg-value pairs */
- uint32_t ta_offset;
- uint32_t ta_size;
-
- uint32_t oom_handle;
- uint32_t oom_offset;
- uint32_t oom_size;
-
- uint32_t cmdbuf_handle; /* 2D Command buffer object or, */
- uint32_t cmdbuf_offset; /* rasterizer reg-value pairs */
- uint32_t cmdbuf_size;
-
- uint32_t reloc_handle; /* Reloc buffer object */
- uint32_t reloc_offset;
- uint32_t num_relocs;
-
- int32_t damage; /* Damage front buffer with cliprects */
- /* Not implemented yet */
- uint32_t fence_flags;
- uint32_t engine;
-
- /*
- * Feedback;
- */
-
- uint32_t feedback_ops;
- uint32_t feedback_handle;
- uint32_t feedback_offset;
- uint32_t feedback_breakpoints;
- uint32_t feedback_size;
-} drm_psb_cmdbuf_arg_t;
-
-typedef struct drm_psb_pageflip_arg {
- uint32_t flip_offset;
- uint32_t stride;
-} drm_psb_pageflip_arg_t;
-
-typedef enum {
- LNC_VIDEO_DEVICE_INFO,
- LNC_VIDEO_GETPARAM_RAR_INFO,
- LNC_VIDEO_GETPARAM_CI_INFO,
- LNC_VIDEO_GETPARAM_RAR_HANDLER_OFFSET,
- LNC_VIDEO_FRAME_SKIP,
- IMG_VIDEO_DECODE_STATUS,
- IMG_VIDEO_NEW_CONTEXT,
- IMG_VIDEO_RM_CONTEXT,
- IMG_VIDEO_MB_ERROR
-} lnc_getparam_key_t;
-
-struct drm_lnc_video_getparam_arg {
- lnc_getparam_key_t key;
- uint64_t arg; /* argument pointer */
- uint64_t value; /* feed back pointer */
-};
-
-
/*
* Feedback components:
*/
-/*
- * Vistest component. The number of these in the feedback buffer
- * equals the number of vistest breakpoints + 1.
- * This is currently the only feedback component.
- */
-
-struct drm_psb_vistest {
- uint32_t vt[8];
-};
-
struct drm_psb_sizes_arg {
- uint32_t ta_mem_size;
- uint32_t mmu_size;
- uint32_t pds_size;
- uint32_t rastgeom_size;
- uint32_t tt_size;
- uint32_t vram_size;
-};
-
-struct drm_psb_hist_status_arg {
- uint32_t buf[32];
+ u32 ta_mem_size;
+ u32 mmu_size;
+ u32 pds_size;
+ u32 rastgeom_size;
+ u32 tt_size;
+ u32 vram_size;
};
struct drm_psb_dpst_lut_arg {
@@ -324,194 +235,6 @@ struct drm_psb_dpst_lut_arg {
int output_id;
};
-struct mrst_timing_info {
- uint16_t pixel_clock;
- uint8_t hactive_lo;
- uint8_t hblank_lo;
- uint8_t hblank_hi:4;
- uint8_t hactive_hi:4;
- uint8_t vactive_lo;
- uint8_t vblank_lo;
- uint8_t vblank_hi:4;
- uint8_t vactive_hi:4;
- uint8_t hsync_offset_lo;
- uint8_t hsync_pulse_width_lo;
- uint8_t vsync_pulse_width_lo:4;
- uint8_t vsync_offset_lo:4;
- uint8_t vsync_pulse_width_hi:2;
- uint8_t vsync_offset_hi:2;
- uint8_t hsync_pulse_width_hi:2;
- uint8_t hsync_offset_hi:2;
- uint8_t width_mm_lo;
- uint8_t height_mm_lo;
- uint8_t height_mm_hi:4;
- uint8_t width_mm_hi:4;
- uint8_t hborder;
- uint8_t vborder;
- uint8_t unknown0:1;
- uint8_t hsync_positive:1;
- uint8_t vsync_positive:1;
- uint8_t separate_sync:2;
- uint8_t stereo:1;
- uint8_t unknown6:1;
- uint8_t interlaced:1;
-} __attribute__((packed));
-
-struct gct_r10_timing_info {
- uint16_t pixel_clock;
- uint32_t hactive_lo:8;
- uint32_t hactive_hi:4;
- uint32_t hblank_lo:8;
- uint32_t hblank_hi:4;
- uint32_t hsync_offset_lo:8;
- uint16_t hsync_offset_hi:2;
- uint16_t hsync_pulse_width_lo:8;
- uint16_t hsync_pulse_width_hi:2;
- uint16_t hsync_positive:1;
- uint16_t rsvd_1:3;
- uint8_t vactive_lo:8;
- uint16_t vactive_hi:4;
- uint16_t vblank_lo:8;
- uint16_t vblank_hi:4;
- uint16_t vsync_offset_lo:4;
- uint16_t vsync_offset_hi:2;
- uint16_t vsync_pulse_width_lo:4;
- uint16_t vsync_pulse_width_hi:2;
- uint16_t vsync_positive:1;
- uint16_t rsvd_2:3;
-} __attribute__((packed));
-
-struct mrst_panel_descriptor_v1{
- uint32_t Panel_Port_Control; /* 1 dword, Register 0x61180 if LVDS */
- /* 0x61190 if MIPI */
- uint32_t Panel_Power_On_Sequencing;/*1 dword,Register 0x61208,*/
- uint32_t Panel_Power_Off_Sequencing;/*1 dword,Register 0x6120C,*/
- uint32_t Panel_Power_Cycle_Delay_and_Reference_Divisor;/* 1 dword */
- /* Register 0x61210 */
- struct mrst_timing_info DTD;/*18 bytes, Standard definition */
- uint16_t Panel_Backlight_Inverter_Descriptor;/* 16 bits, as follows */
- /* Bit 0, Frequency, 15 bits,0 - 32767Hz */
- /* Bit 15, Polarity, 1 bit, 0: Normal, 1: Inverted */
- uint16_t Panel_MIPI_Display_Descriptor;
- /*16 bits, Defined as follows: */
- /* if MIPI, 0x0000 if LVDS */
- /* Bit 0, Type, 2 bits, */
- /* 0: Type-1, */
- /* 1: Type-2, */
- /* 2: Type-3, */
- /* 3: Type-4 */
- /* Bit 2, Pixel Format, 4 bits */
- /* Bit0: 16bpp (not supported in LNC), */
- /* Bit1: 18bpp loosely packed, */
- /* Bit2: 18bpp packed, */
- /* Bit3: 24bpp */
- /* Bit 6, Reserved, 2 bits, 00b */
- /* Bit 8, Minimum Supported Frame Rate, 6 bits, 0 - 63Hz */
- /* Bit 14, Reserved, 2 bits, 00b */
-} __attribute__ ((packed));
-
-struct mrst_panel_descriptor_v2{
- uint32_t Panel_Port_Control; /* 1 dword, Register 0x61180 if LVDS */
- /* 0x61190 if MIPI */
- uint32_t Panel_Power_On_Sequencing;/*1 dword,Register 0x61208,*/
- uint32_t Panel_Power_Off_Sequencing;/*1 dword,Register 0x6120C,*/
- uint8_t Panel_Power_Cycle_Delay_and_Reference_Divisor;/* 1 byte */
- /* Register 0x61210 */
- struct mrst_timing_info DTD;/*18 bytes, Standard definition */
- uint16_t Panel_Backlight_Inverter_Descriptor;/*16 bits, as follows*/
- /*Bit 0, Frequency, 16 bits, 0 - 32767Hz*/
- uint8_t Panel_Initial_Brightness;/* [7:0] 0 - 100% */
- /*Bit 7, Polarity, 1 bit,0: Normal, 1: Inverted*/
- uint16_t Panel_MIPI_Display_Descriptor;
- /*16 bits, Defined as follows: */
- /* if MIPI, 0x0000 if LVDS */
- /* Bit 0, Type, 2 bits, */
- /* 0: Type-1, */
- /* 1: Type-2, */
- /* 2: Type-3, */
- /* 3: Type-4 */
- /* Bit 2, Pixel Format, 4 bits */
- /* Bit0: 16bpp (not supported in LNC), */
- /* Bit1: 18bpp loosely packed, */
- /* Bit2: 18bpp packed, */
- /* Bit3: 24bpp */
- /* Bit 6, Reserved, 2 bits, 00b */
- /* Bit 8, Minimum Supported Frame Rate, 6 bits, 0 - 63Hz */
- /* Bit 14, Reserved, 2 bits, 00b */
-} __attribute__ ((packed));
-
-union mrst_panel_rx{
- struct{
- uint16_t NumberOfLanes:2; /*Num of Lanes, 2 bits,0 = 1 lane,*/
- /* 1 = 2 lanes, 2 = 3 lanes, 3 = 4 lanes. */
- uint16_t MaxLaneFreq:3; /* 0: 100MHz, 1: 200MHz, 2: 300MHz, */
- /*3: 400MHz, 4: 500MHz, 5: 600MHz, 6: 700MHz, 7: 800MHz.*/
- uint16_t SupportedVideoTransferMode:2; /*0: Non-burst only */
- /* 1: Burst and non-burst */
- /* 2/3: Reserved */
- uint16_t HSClkBehavior:1; /*0: Continuous, 1: Non-continuous*/
- uint16_t DuoDisplaySupport:1; /*1 bit,0: No, 1: Yes*/
- uint16_t ECC_ChecksumCapabilities:1;/*1 bit,0: No, 1: Yes*/
- uint16_t BidirectionalCommunication:1;/*1 bit,0: No, 1: Yes */
- uint16_t Rsvd:5;/*5 bits,00000b */
- } panelrx;
- uint16_t panel_receiver;
-} __attribute__ ((packed));
-
-struct gct_ioctl_arg{
- uint8_t bpi; /* boot panel index, number of panel used during boot */
- uint8_t pt; /* panel type, 4 bit field, 0=lvds, 1=mipi */
- struct mrst_timing_info DTD; /* timing info for the selected panel */
- uint32_t Panel_Port_Control;
- uint32_t PP_On_Sequencing;/*1 dword,Register 0x61208,*/
- uint32_t PP_Off_Sequencing;/*1 dword,Register 0x6120C,*/
- uint32_t PP_Cycle_Delay;
- uint16_t Panel_Backlight_Inverter_Descriptor;
- uint16_t Panel_MIPI_Display_Descriptor;
-} __attribute__ ((packed));
-
-struct mrst_vbt{
- char Signature[4]; /*4 bytes,"$GCT" */
- uint8_t Revision; /*1 byte */
- uint8_t Size; /*1 byte */
- uint8_t Checksum; /*1 byte,Calculated*/
- void *mrst_gct;
-} __attribute__ ((packed));
-
-struct mrst_gct_v1{ /* expect this table to change per customer request*/
- union{ /*8 bits,Defined as follows: */
- struct{
- uint8_t PanelType:4; /*4 bits, Bit field for panels*/
- /* 0 - 3: 0 = LVDS, 1 = MIPI*/
- /*2 bits,Specifies which of the*/
- uint8_t BootPanelIndex:2;
- /* 4 panels to use by default*/
- uint8_t BootMIPI_DSI_RxIndex:2;/*Specifies which of*/
- /* the 4 MIPI DSI receivers to use*/
- } PD;
- uint8_t PanelDescriptor;
- };
- struct mrst_panel_descriptor_v1 panel[4];/*panel descrs,38 bytes each*/
- union mrst_panel_rx panelrx[4]; /* panel receivers*/
-} __attribute__ ((packed));
-
-struct mrst_gct_v2{ /* expect this table to change per customer request*/
- union{ /*8 bits,Defined as follows: */
- struct{
- uint8_t PanelType:4; /*4 bits, Bit field for panels*/
- /* 0 - 3: 0 = LVDS, 1 = MIPI*/
- /*2 bits,Specifies which of the*/
- uint8_t BootPanelIndex:2;
- /* 4 panels to use by default*/
- uint8_t BootMIPI_DSI_RxIndex:2;/*Specifies which of*/
- /* the 4 MIPI DSI receivers to use*/
- } PD;
- uint8_t PanelDescriptor;
- };
- struct mrst_panel_descriptor_v2 panel[4];/*panel descrs,38 bytes each*/
- union mrst_panel_rx panelrx[4]; /* panel receivers*/
-} __attribute__ ((packed));
-
#define PSB_DC_CRTC_SAVE 0x01
#define PSB_DC_CRTC_RESTORE 0x02
#define PSB_DC_OUTPUT_SAVE 0x04
@@ -520,20 +243,20 @@ struct mrst_gct_v2{ /* expect this table to change per customer request*/
#define PSB_DC_OUTPUT_MASK 0x0C
struct drm_psb_dc_state_arg {
- uint32_t flags;
- uint32_t obj_id;
+ u32 flags;
+ u32 obj_id;
};
struct drm_psb_mode_operation_arg {
- uint32_t obj_id;
- uint16_t operation;
+ u32 obj_id;
+ u16 operation;
struct drm_mode_modeinfo mode;
void *data;
};
struct drm_psb_stolen_memory_arg {
- uint32_t base;
- uint32_t size;
+ u32 base;
+ u32 size;
};
/*Display Register Bits*/
@@ -556,64 +279,64 @@ struct drm_psb_stolen_memory_arg {
#define OVC_REGRWBITS_OGAM_ALL (1 << 3)
struct drm_psb_register_rw_arg {
- uint32_t b_force_hw_on;
+ u32 b_force_hw_on;
- uint32_t display_read_mask;
- uint32_t display_write_mask;
+ u32 display_read_mask;
+ u32 display_write_mask;
struct {
- uint32_t pfit_controls;
- uint32_t pfit_autoscale_ratios;
- uint32_t pfit_programmed_scale_ratios;
- uint32_t pipeasrc;
- uint32_t pipebsrc;
- uint32_t vtotal_a;
- uint32_t vtotal_b;
+ u32 pfit_controls;
+ u32 pfit_autoscale_ratios;
+ u32 pfit_programmed_scale_ratios;
+ u32 pipeasrc;
+ u32 pipebsrc;
+ u32 vtotal_a;
+ u32 vtotal_b;
} display;
- uint32_t overlay_read_mask;
- uint32_t overlay_write_mask;
+ u32 overlay_read_mask;
+ u32 overlay_write_mask;
struct {
- uint32_t OVADD;
- uint32_t OGAMC0;
- uint32_t OGAMC1;
- uint32_t OGAMC2;
- uint32_t OGAMC3;
- uint32_t OGAMC4;
- uint32_t OGAMC5;
- uint32_t IEP_ENABLED;
- uint32_t IEP_BLE_MINMAX;
- uint32_t IEP_BSSCC_CONTROL;
- uint32_t b_wait_vblank;
+ u32 OVADD;
+ u32 OGAMC0;
+ u32 OGAMC1;
+ u32 OGAMC2;
+ u32 OGAMC3;
+ u32 OGAMC4;
+ u32 OGAMC5;
+ u32 IEP_ENABLED;
+ u32 IEP_BLE_MINMAX;
+ u32 IEP_BSSCC_CONTROL;
+ u32 b_wait_vblank;
} overlay;
- uint32_t sprite_enable_mask;
- uint32_t sprite_disable_mask;
+ u32 sprite_enable_mask;
+ u32 sprite_disable_mask;
struct {
- uint32_t dspa_control;
- uint32_t dspa_key_value;
- uint32_t dspa_key_mask;
- uint32_t dspc_control;
- uint32_t dspc_stride;
- uint32_t dspc_position;
- uint32_t dspc_linear_offset;
- uint32_t dspc_size;
- uint32_t dspc_surface;
+ u32 dspa_control;
+ u32 dspa_key_value;
+ u32 dspa_key_mask;
+ u32 dspc_control;
+ u32 dspc_stride;
+ u32 dspc_position;
+ u32 dspc_linear_offset;
+ u32 dspc_size;
+ u32 dspc_surface;
} sprite;
- uint32_t subpicture_enable_mask;
- uint32_t subpicture_disable_mask;
+ u32 subpicture_enable_mask;
+ u32 subpicture_disable_mask;
};
struct psb_gtt_mapping_arg {
void *hKernelMemInfo;
- uint32_t offset_pages;
+ u32 offset_pages;
};
struct drm_psb_getpageaddrs_arg {
- uint32_t handle;
+ u32 handle;
unsigned long *page_addrs;
unsigned long gtt_offset;
};
@@ -659,38 +382,16 @@ struct drm_psb_getpageaddrs_arg {
#define DRM_PVR_RESERVED6 0x1E
#define DRM_PSB_GET_PIPE_FROM_CRTC_ID 0x1F
-#define DRM_PSB_DPU_QUERY 0x20
-#define DRM_PSB_DPU_DSR_ON 0x21
-#define DRM_PSB_DPU_DSR_OFF 0x22
-
-#define DRM_PSB_DSR_ENABLE 0xfffffffe
-#define DRM_PSB_DSR_DISABLE 0xffffffff
-
-struct psb_drm_dpu_rect {
- int x, y;
- int width, height;
-};
-
-struct drm_psb_drv_dsr_off_arg {
- int screen;
- struct psb_drm_dpu_rect damage_rect;
-};
-
-
-struct drm_psb_dev_info_arg {
- uint32_t num_use_attribute_registers;
-};
-#define DRM_PSB_DEVINFO 0x01
#define PSB_MODE_OPERATION_MODE_VALID 0x01
#define PSB_MODE_OPERATION_SET_DC_BASE 0x02
struct drm_psb_get_pipe_from_crtc_id_arg {
/** ID of CRTC being requested **/
- uint32_t crtc_id;
+ u32 crtc_id;
/** pipe of requested CRTC **/
- uint32_t pipe;
+ u32 pipe;
};
#endif
diff --git a/drivers/staging/gma500/psb_drv.c b/drivers/staging/gma500/psb_drv.c
index 2b410af..090d9a2 100644
--- a/drivers/staging/gma500/psb_drv.c
+++ b/drivers/staging/gma500/psb_drv.c
@@ -33,14 +33,13 @@
#include <linux/notifier.h>
#include <linux/spinlock.h>
#include <linux/pm_runtime.h>
+#include <acpi/video.h>
int drm_psb_debug;
static int drm_psb_trap_pagefaults;
int drm_psb_disable_vsync = 1;
int drm_psb_no_fb;
-int drm_psb_force_pipeb;
-int drm_idle_check_interval = 5;
int gfxrtdelay = 2 * 1000;
static int psb_probe(struct pci_dev *pdev, const struct pci_device_id *ent);
@@ -57,7 +56,6 @@ MODULE_PARM_DESC(hdmi_edid, "EDID info for HDMI monitor");
module_param_named(debug, drm_psb_debug, int, 0600);
module_param_named(no_fb, drm_psb_no_fb, int, 0600);
module_param_named(trap_pagefaults, drm_psb_trap_pagefaults, int, 0600);
-module_param_named(force_pipeb, drm_psb_force_pipeb, int, 0600);
module_param_named(rtpm, gfxrtdelay, int, 0600);
@@ -108,12 +106,6 @@ MODULE_DEVICE_TABLE(pci, pciidlist);
#define DRM_IOCTL_PSB_GETPAGEADDRS \
DRM_IOWR(DRM_COMMAND_BASE + DRM_PSB_GETPAGEADDRS,\
struct drm_psb_getpageaddrs_arg)
-#define DRM_IOCTL_PSB_HIST_ENABLE \
- DRM_IOWR(DRM_PSB_HIST_ENABLE + DRM_COMMAND_BASE, \
- uint32_t)
-#define DRM_IOCTL_PSB_HIST_STATUS \
- DRM_IOWR(DRM_PSB_HIST_STATUS + DRM_COMMAND_BASE, \
- struct drm_psb_hist_status_arg)
#define DRM_IOCTL_PSB_UPDATE_GUARD \
DRM_IOWR(DRM_PSB_UPDATE_GUARD + DRM_COMMAND_BASE, \
uint32_t)
@@ -133,15 +125,9 @@ MODULE_DEVICE_TABLE(pci, pciidlist);
/*
* TTM execbuf extension.
*/
-#define DRM_PSB_CMDBUF (DRM_PSB_DPU_DSR_OFF + 1)
-
-#define DRM_PSB_SCENE_UNREF (DRM_PSB_CMDBUF + 1)
-#define DRM_IOCTL_PSB_CMDBUF \
- DRM_IOW(DRM_PSB_CMDBUF + DRM_COMMAND_BASE, \
- struct drm_psb_cmdbuf_arg)
-#define DRM_IOCTL_PSB_SCENE_UNREF \
- DRM_IOW(DRM_PSB_SCENE_UNREF + DRM_COMMAND_BASE, \
- struct drm_psb_scene)
+
+#define DRM_PSB_CMDBUF 0x23
+#define DRM_PSB_SCENE_UNREF 0x24
#define DRM_IOCTL_PSB_KMS_OFF DRM_IO(DRM_PSB_KMS_OFF + DRM_COMMAND_BASE)
#define DRM_IOCTL_PSB_KMS_ON DRM_IO(DRM_PSB_KMS_ON + DRM_COMMAND_BASE)
/*
@@ -168,8 +154,6 @@ MODULE_DEVICE_TABLE(pci, pciidlist);
#define DRM_PSB_TTM_FENCE_UNREF (TTM_FENCE_UNREF + DRM_PSB_FENCE_OFFSET)
#define DRM_PSB_FLIP (DRM_PSB_TTM_FENCE_UNREF + 1) /*20*/
-/* PSB video extension */
-#define DRM_LNC_VIDEO_GETPARAM (DRM_PSB_FLIP + 1)
#define DRM_IOCTL_PSB_TTM_PL_CREATE \
DRM_IOWR(DRM_COMMAND_BASE + DRM_PSB_TTM_PL_CREATE,\
@@ -201,12 +185,6 @@ MODULE_DEVICE_TABLE(pci, pciidlist);
#define DRM_IOCTL_PSB_TTM_FENCE_UNREF \
DRM_IOW(DRM_COMMAND_BASE + DRM_PSB_TTM_FENCE_UNREF, \
struct ttm_fence_unref_arg)
-#define DRM_IOCTL_PSB_FLIP \
- DRM_IOWR(DRM_COMMAND_BASE + DRM_PSB_FLIP, \
- struct drm_psb_pageflip_arg)
-#define DRM_IOCTL_LNC_VIDEO_GETPARAM \
- DRM_IOWR(DRM_COMMAND_BASE + DRM_LNC_VIDEO_GETPARAM, \
- struct drm_lnc_video_getparam_arg)
static int psb_vt_leave_ioctl(struct drm_device *dev, void *data,
struct drm_file *file_priv);
@@ -268,9 +246,6 @@ static struct drm_ioctl_desc psb_ioctls[] = {
PSB_IOCTL_DEF(DRM_IOCTL_PSB_DPST_BL, psb_dpst_bl_ioctl, DRM_AUTH),
PSB_IOCTL_DEF(DRM_IOCTL_PSB_GET_PIPE_FROM_CRTC_ID,
psb_intel_get_pipe_from_crtc_id, 0),
- /*to be removed later*/
- /*PSB_IOCTL_DEF(DRM_IOCTL_PSB_SCENE_UNREF, drm_psb_scene_unref_ioctl,
- DRM_AUTH),*/
PSB_IOCTL_DEF(DRM_IOCTL_PSB_TTM_PL_CREATE, psb_pl_create_ioctl,
DRM_AUTH),
@@ -392,15 +367,6 @@ static void psb_get_core_freq(struct drm_device *dev)
#define FB_SKU_100 0
#define FB_SKU_100L 1
#define FB_SKU_83 2
-#if 1 /* FIXME remove it after PO */
-#define FB_GFX_CLK_DIVIDE_MASK (BIT20|BIT21|BIT22)
-#define FB_GFX_CLK_DIVIDE_SHIFT 20
-#define FB_VED_CLK_DIVIDE_MASK (BIT23|BIT24)
-#define FB_VED_CLK_DIVIDE_SHIFT 23
-#define FB_VEC_CLK_DIVIDE_MASK (BIT25|BIT26)
-#define FB_VEC_CLK_DIVIDE_SHIFT 25
-#endif /* FIXME remove it after PO */
-
bool mid_get_pci_revID(struct drm_psb_private *dev_priv)
{
@@ -596,7 +562,7 @@ static int psb_driver_unload(struct drm_device *dev)
dev->dev_private = NULL;
/*destory VBT data*/
- psb_intel_destory_bios(dev);
+ psb_intel_destroy_bios(dev);
}
ospm_power_uninit();
@@ -615,10 +581,6 @@ static int psb_driver_load(struct drm_device *dev, unsigned long chipset)
int ret = -ENOMEM;
uint32_t tt_pages;
- DRM_INFO("psb - %s\n", PSB_PACKAGE_VERSION);
-
- DRM_INFO("Run drivers on Poulsbo platform!\n");
-
dev_priv = kzalloc(sizeof(*dev_priv), GFP_KERNEL);
if (dev_priv == NULL)
return -ENOMEM;
@@ -774,11 +736,8 @@ static int psb_driver_load(struct drm_device *dev, unsigned long chipset)
if (ret)
return ret;
- /**
- * Init lid switch timer.
- * NOTE: must do this after psb_intel_opregion_init
- * and psb_backlight_init
- */
+/* igd_opregion_init(&dev_priv->opregion_dev); */
+ acpi_video_register();
if (dev_priv->lid_state)
psb_lid_timer_init(dev_priv);
diff --git a/drivers/staging/gma500/psb_drv.h b/drivers/staging/gma500/psb_drv.h
index f7c9762..29a3605 100644
--- a/drivers/staging/gma500/psb_drv.h
+++ b/drivers/staging/gma500/psb_drv.h
@@ -368,7 +368,6 @@ struct drm_psb_private {
unsigned long chipset;
- struct drm_psb_dev_info_arg dev_info;
struct drm_psb_uopt uopt;
struct psb_gtt *pg;
diff --git a/drivers/staging/gma500/psb_intel_bios.c b/drivers/staging/gma500/psb_intel_bios.c
index 83d8e93..f5bcd11 100644
--- a/drivers/staging/gma500/psb_intel_bios.c
+++ b/drivers/staging/gma500/psb_intel_bios.c
@@ -273,7 +273,7 @@ bool psb_intel_init_bios(struct drm_device *dev)
/**
* Destory and free VBT data
*/
-void psb_intel_destory_bios(struct drm_device *dev)
+void psb_intel_destroy_bios(struct drm_device *dev)
{
struct drm_psb_private *dev_priv = dev->dev_private;
struct drm_display_mode *sdvo_lvds_vbt_mode =
diff --git a/drivers/staging/gma500/psb_intel_bios.h b/drivers/staging/gma500/psb_intel_bios.h
index ad30a68..70f1bf0 100644
--- a/drivers/staging/gma500/psb_intel_bios.h
+++ b/drivers/staging/gma500/psb_intel_bios.h
@@ -304,7 +304,7 @@ struct bdb_sdvo_lvds_options {
extern bool psb_intel_init_bios(struct drm_device *dev);
-extern void psb_intel_destory_bios(struct drm_device *dev);
+extern void psb_intel_destroy_bios(struct drm_device *dev);
/*
* Driver<->VBIOS interaction occurs through scratch bits in
diff --git a/drivers/staging/gma500/psb_intel_reg.h b/drivers/staging/gma500/psb_intel_reg.h
index 0c323c0..1c28314 100644
--- a/drivers/staging/gma500/psb_intel_reg.h
+++ b/drivers/staging/gma500/psb_intel_reg.h
@@ -22,7 +22,7 @@
#define BLC_PWM_CTL_C 0x62254
#define BLC_PWM_CTL2_C 0x62250
#define BACKLIGHT_MODULATION_FREQ_SHIFT (17)
-/**
+/*
* This is the most significant 15 bits of the number of backlight cycles in a
* complete cycle of the modulated backlight control.
*
@@ -30,7 +30,7 @@
*/
#define BACKLIGHT_MODULATION_FREQ_MASK (0x7fff << 17)
#define BLM_LEGACY_MODE (1 << 16)
-/**
+/*
* This is the number of cycles out of the backlight modulation cycle for which
* the backlight is on.
*
@@ -86,7 +86,7 @@
#define PP_STATUS 0x61200
# define PP_ON (1 << 31)
-/**
+/*
* Indicates that all dependencies of the panel are on:
*
* - PLL enabled
@@ -143,12 +143,12 @@
# define DPLLB_LVDS_P2_CLOCK_DIV_7 (1 << 24) /* i915 */
# define DPLL_P2_CLOCK_DIV_MASK 0x03000000 /* i915 */
# define DPLL_FPA01_P1_POST_DIV_MASK 0x00ff0000 /* i915 */
-/**
+/*
* The i830 generation, in DAC/serial mode, defines p1 as two plus this
* bitfield, or just 2 if PLL_P1_DIVIDE_BY_TWO is set.
*/
# define DPLL_FPA01_P1_POST_DIV_MASK_I830 0x001f0000
-/**
+/*
* The i830 generation, in LVDS mode, defines P1 as the bit number set within
* this field (only one bit may be set).
*/
@@ -173,33 +173,33 @@
# define PLL_LOAD_PULSE_PHASE_MASK (0xf << PLL_LOAD_PULSE_PHASE_SHIFT)
# define DISPLAY_RATE_SELECT_FPA1 (1 << 8)
-/**
+/*
* SDVO multiplier for 945G/GM. Not used on 965.
*
- * \sa DPLL_MD_UDI_MULTIPLIER_MASK
+ * DPLL_MD_UDI_MULTIPLIER_MASK
*/
# define SDVO_MULTIPLIER_MASK 0x000000ff
# define SDVO_MULTIPLIER_SHIFT_HIRES 4
# define SDVO_MULTIPLIER_SHIFT_VGA 0
-/** @defgroup DPLL_MD
- * @{
+/*
+ * PLL_MD
*/
-/** Pipe A SDVO/UDI clock multiplier/divider register for G965. */
+/* Pipe A SDVO/UDI clock multiplier/divider register for G965. */
#define DPLL_A_MD 0x0601c
-/** Pipe B SDVO/UDI clock multiplier/divider register for G965. */
+/* Pipe B SDVO/UDI clock multiplier/divider register for G965. */
#define DPLL_B_MD 0x06020
-/**
+/*
* UDI pixel divider, controlling how many pixels are stuffed into a packet.
*
* Value is pixels minus 1. Must be set to 1 pixel for SDVO.
*/
# define DPLL_MD_UDI_DIVIDER_MASK 0x3f000000
# define DPLL_MD_UDI_DIVIDER_SHIFT 24
-/** UDI pixel divider for VGA, same as DPLL_MD_UDI_DIVIDER_MASK. */
+/* UDI pixel divider for VGA, same as DPLL_MD_UDI_DIVIDER_MASK. */
# define DPLL_MD_VGA_UDI_DIVIDER_MASK 0x003f0000
# define DPLL_MD_VGA_UDI_DIVIDER_SHIFT 16
-/**
+/*
* SDVO/UDI pixel multiplier.
*
* SDVO requires that the bus clock rate be between 1 and 2 Ghz, and the bus
@@ -218,13 +218,13 @@
*/
# define DPLL_MD_UDI_MULTIPLIER_MASK 0x00003f00
# define DPLL_MD_UDI_MULTIPLIER_SHIFT 8
-/** SDVO/UDI pixel multiplier for VGA, same as DPLL_MD_UDI_MULTIPLIER_MASK.
+/*
+ * SDVO/UDI pixel multiplier for VGA, same as DPLL_MD_UDI_MULTIPLIER_MASK.
* This best be set to the default value (3) or the CRT won't work. No,
* I don't entirely understand what this does...
*/
# define DPLL_MD_VGA_UDI_MULTIPLIER_MASK 0x0000003f
# define DPLL_MD_VGA_UDI_MULTIPLIER_SHIFT 0
-/** @} */
#define DPLL_TEST 0x606c
# define DPLLB_TEST_SDVO_DIV_1 (0 << 22)
@@ -295,7 +295,7 @@
*
* Programmed value is multiplier - 1, up to 5x.
*
- * \sa DPLL_MD_UDI_MULTIPLIER_MASK
+ * DPLL_MD_UDI_MULTIPLIER_MASK
*/
#define SDVO_PORT_MULTIPLY_MASK (7 << 23)
#define SDVO_PORT_MULTIPLY_SHIFT 23
@@ -310,35 +310,32 @@
#define SDVOB_PRESERVE_MASK ((1 << 17) | (1 << 16) | (1 << 14))
#define SDVOC_PRESERVE_MASK (1 << 17)
-/** @defgroup LVDS
- * @{
- */
-/**
+/*
* This register controls the LVDS output enable, pipe selection, and data
* format selection.
*
* All of the clock/data pairs are force powered down by power sequencing.
*/
#define LVDS 0x61180
-/**
+/*
* Enables the LVDS port. This bit must be set before DPLLs are enabled, as
* the DPLL semantics change when the LVDS is assigned to that pipe.
*/
# define LVDS_PORT_EN (1 << 31)
-/** Selects pipe B for LVDS data. Must be set on pre-965. */
+/* Selects pipe B for LVDS data. Must be set on pre-965. */
# define LVDS_PIPEB_SELECT (1 << 30)
-/** Turns on border drawing to allow centered display. */
+/* Turns on border drawing to allow centered display. */
# define LVDS_BORDER_EN (1 << 15)
-/**
+/*
* Enables the A0-A2 data pairs and CLKA, containing 18 bits of color data per
* pixel.
*/
# define LVDS_A0A2_CLKA_POWER_MASK (3 << 8)
# define LVDS_A0A2_CLKA_POWER_DOWN (0 << 8)
# define LVDS_A0A2_CLKA_POWER_UP (3 << 8)
-/**
+/*
* Controls the A3 data pair, which contains the additional LSBs for 24 bit
* mode. Only enabled if LVDS_A0A2_CLKA_POWER_UP also indicates it should be
* on.
@@ -346,15 +343,14 @@
# define LVDS_A3_POWER_MASK (3 << 6)
# define LVDS_A3_POWER_DOWN (0 << 6)
# define LVDS_A3_POWER_UP (3 << 6)
-/**
+/*
* Controls the CLKB pair. This should only be set when LVDS_B0B3_POWER_UP
* is set.
*/
# define LVDS_CLKB_POWER_MASK (3 << 4)
# define LVDS_CLKB_POWER_DOWN (0 << 4)
# define LVDS_CLKB_POWER_UP (3 << 4)
-
-/**
+/*
* Controls the B0-B3 data pairs. This must be set to match the DPLL p2
* setting for whether we are in dual-channel mode. The B3 pair will
* additionally only be powered up when LVDS_A3_POWER_UP is set.
@@ -419,8 +415,8 @@
#define PIPE_HDMI_AUDIO_UNDERRUN (1UL<<26)
#define PIPE_HDMI_AUDIO_BUFFER_DONE (1UL<<27)
#define PIPE_HDMI_AUDIO_INT_MASK (PIPE_HDMI_AUDIO_UNDERRUN | PIPE_HDMI_AUDIO_BUFFER_DONE)
-#define PIPE_EVENT_MASK (BIT29|BIT28|BIT27|BIT26|BIT24|BIT23|BIT22|BIT21|BIT20|BIT16)
-#define PIPE_VBLANK_MASK (BIT25|BIT24|BIT18|BIT17)
+#define PIPE_EVENT_MASK ((1 << 29)|(1 << 28)|(1 << 27)|(1 << 26)|(1 << 24)|(1 << 23)|(1 << 22)|(1 << 21)|(1 << 20)|(1 << 16))
+#define PIPE_VBLANK_MASK ((1 << 25)|(1 << 24)|(1 << 18)|(1 << 17))
#define HISTOGRAM_INT_CONTROL 0x61268
#define HISTOGRAM_BIN_DATA 0X61264
#define HISTOGRAM_LOGIC_CONTROL 0x61260
@@ -567,7 +563,7 @@ struct dpst_guardband {
#define OV_C_OFFSET 0x08000
#define OV_OVADD 0x30000
#define OV_DOVASTA 0x30008
-# define OV_PIPE_SELECT (BIT6|BIT7)
+# define OV_PIPE_SELECT ((1 << 6)|(1 << 7))
# define OV_PIPE_SELECT_POS 6
# define OV_PIPE_A 0
# define OV_PIPE_C 1
@@ -629,40 +625,6 @@ struct dpst_guardband {
#define PALETTE_B 0x0a800
#define PALETTE_C 0x0ac00
-#define IS_I830(dev) ((dev)->pci_device == PCI_DEVICE_ID_INTEL_82830_CGC)
-#define IS_845G(dev) ((dev)->pci_device == PCI_DEVICE_ID_INTEL_82845G_IG)
-#define IS_I85X(dev) ((dev)->pci_device == PCI_DEVICE_ID_INTEL_82855GM_IG)
-#define IS_I855(dev) ((dev)->pci_device == PCI_DEVICE_ID_INTEL_82855GM_IG)
-#define IS_I865G(dev) ((dev)->pci_device == PCI_DEVICE_ID_INTEL_82865_IG)
-
-
-/* || dev->pci_device == PCI_DEVICE_ID_INTELPCI_CHIP_E7221_G) */
-#define IS_I915G(dev) (dev->pci_device == PCI_DEVICE_ID_INTEL_82915G_IG)
-#define IS_I915GM(dev) ((dev)->pci_device == PCI_DEVICE_ID_INTEL_82915GM_IG)
-#define IS_I945G(dev) ((dev)->pci_device == PCI_DEVICE_ID_INTEL_82945G_IG)
-#define IS_I945GM(dev) ((dev)->pci_device == PCI_DEVICE_ID_INTEL_82945GM_IG)
-
-#define IS_I965G(dev) ((dev)->pci_device == 0x2972 || \
- (dev)->pci_device == 0x2982 || \
- (dev)->pci_device == 0x2992 || \
- (dev)->pci_device == 0x29A2 || \
- (dev)->pci_device == 0x2A02 || \
- (dev)->pci_device == 0x2A12)
-
-#define IS_I965GM(dev) ((dev)->pci_device == 0x2A02)
-
-#define IS_G33(dev) ((dev)->pci_device == 0x29C2 || \
- (dev)->pci_device == 0x29B2 || \
- (dev)->pci_device == 0x29D2)
-
-#define IS_I9XX(dev) (IS_I915G(dev) || IS_I915GM(dev) || IS_I945G(dev) || \
- IS_I945GM(dev) || IS_I965G(dev) || IS_POULSBO(dev) || \
- IS_MRST(dev))
-
-#define IS_MOBILE(dev) (IS_I830(dev) || IS_I85X(dev) || IS_I915GM(dev) || \
- IS_I945GM(dev) || IS_I965GM(dev) || \
- IS_POULSBO(dev) || IS_MRST(dev))
-
/* Cursor A & B regs */
#define CURACNTR 0x70080
#define CURSOR_MODE_DISABLE 0x00
@@ -707,7 +669,9 @@ struct dpst_guardband {
#define MDFLD_DPLL_DIV1 0x0f04c
#define MRST_PERF_MODE 0x020f4
-/* MEDFIELD HDMI registers */
+/*
+ * MEDFIELD HDMI registers
+ */
#define HDMIPHYMISCCTL 0x61134
# define HDMI_PHY_POWER_DOWN 0x7f
#define HDMIB_CONTROL 0x61140
@@ -724,7 +688,7 @@ struct dpst_guardband {
#define MIPI 0x61190
#define MIPI_C 0x62190
# define MIPI_PORT_EN (1 << 31)
-/** Turns on border drawing to allow centered display. */
+/* Turns on border drawing to allow centered display. */
# define SEL_FLOPPED_HSTX (1 << 23)
# define PASS_FROM_SPHY_TO_AFE (1 << 16)
# define MIPI_BORDER_EN (1 << 15)
@@ -756,47 +720,13 @@ struct dpst_guardband {
/*
* Moorestown registers.
*/
-/*===========================================================================
-; General Constants
-;--------------------------------------------------------------------------*/
-#define BIT0 0x00000001
-#define BIT1 0x00000002
-#define BIT2 0x00000004
-#define BIT3 0x00000008
-#define BIT4 0x00000010
-#define BIT5 0x00000020
-#define BIT6 0x00000040
-#define BIT7 0x00000080
-#define BIT8 0x00000100
-#define BIT9 0x00000200
-#define BIT10 0x00000400
-#define BIT11 0x00000800
-#define BIT12 0x00001000
-#define BIT13 0x00002000
-#define BIT14 0x00004000
-#define BIT15 0x00008000
-#define BIT16 0x00010000
-#define BIT17 0x00020000
-#define BIT18 0x00040000
-#define BIT19 0x00080000
-#define BIT20 0x00100000
-#define BIT21 0x00200000
-#define BIT22 0x00400000
-#define BIT23 0x00800000
-#define BIT24 0x01000000
-#define BIT25 0x02000000
-#define BIT26 0x04000000
-#define BIT27 0x08000000
-#define BIT28 0x10000000
-#define BIT29 0x20000000
-#define BIT30 0x40000000
-#define BIT31 0x80000000
-/*===========================================================================
-; MIPI IP registers
-;--------------------------------------------------------------------------*/
+
+/*
+ * MIPI IP registers
+ */
#define MIPIC_REG_OFFSET 0x800
#define DEVICE_READY_REG 0xb000
-#define LP_OUTPUT_HOLD BIT16
+#define LP_OUTPUT_HOLD (1 << 16)
#define EXIT_ULPS_DEV_READY 0x3
#define LP_OUTPUT_HOLD_RELEASE 0x810000
# define ENTERING_ULPS (2 << 1)
@@ -804,33 +734,33 @@ struct dpst_guardband {
# define ULPS_MASK (3 << 1)
# define BUS_POSSESSION (1 << 3)
#define INTR_STAT_REG 0xb004
-#define RX_SOT_ERROR BIT0
-#define RX_SOT_SYNC_ERROR BIT1
-#define RX_ESCAPE_MODE_ENTRY_ERROR BIT3
-#define RX_LP_TX_SYNC_ERROR BIT4
-#define RX_HS_RECEIVE_TIMEOUT_ERROR BIT5
-#define RX_FALSE_CONTROL_ERROR BIT6
-#define RX_ECC_SINGLE_BIT_ERROR BIT7
-#define RX_ECC_MULTI_BIT_ERROR BIT8
-#define RX_CHECKSUM_ERROR BIT9
-#define RX_DSI_DATA_TYPE_NOT_RECOGNIZED BIT10
-#define RX_DSI_VC_ID_INVALID BIT11
-#define TX_FALSE_CONTROL_ERROR BIT12
-#define TX_ECC_SINGLE_BIT_ERROR BIT13
-#define TX_ECC_MULTI_BIT_ERROR BIT14
-#define TX_CHECKSUM_ERROR BIT15
-#define TX_DSI_DATA_TYPE_NOT_RECOGNIZED BIT16
-#define TX_DSI_VC_ID_INVALID BIT17
-#define HIGH_CONTENTION BIT18
-#define LOW_CONTENTION BIT19
-#define DPI_FIFO_UNDER_RUN BIT20
-#define HS_TX_TIMEOUT BIT21
-#define LP_RX_TIMEOUT BIT22
-#define TURN_AROUND_ACK_TIMEOUT BIT23
-#define ACK_WITH_NO_ERROR BIT24
-#define HS_GENERIC_WR_FIFO_FULL BIT27
-#define LP_GENERIC_WR_FIFO_FULL BIT28
-#define SPL_PKT_SENT BIT30
+#define RX_SOT_ERROR (1 << 0)
+#define RX_SOT_SYNC_ERROR (1 << 1)
+#define RX_ESCAPE_MODE_ENTRY_ERROR (1 << 3)
+#define RX_LP_TX_SYNC_ERROR (1 << 4)
+#define RX_HS_RECEIVE_TIMEOUT_ERROR (1 << 5)
+#define RX_FALSE_CONTROL_ERROR (1 << 6)
+#define RX_ECC_SINGLE_BIT_ERROR (1 << 7)
+#define RX_ECC_MULTI_BIT_ERROR (1 << 8)
+#define RX_CHECKSUM_ERROR (1 << 9)
+#define RX_DSI_DATA_TYPE_NOT_RECOGNIZED (1 << 10)
+#define RX_DSI_VC_ID_INVALID (1 << 11)
+#define TX_FALSE_CONTROL_ERROR (1 << 12)
+#define TX_ECC_SINGLE_BIT_ERROR (1 << 13)
+#define TX_ECC_MULTI_BIT_ERROR (1 << 14)
+#define TX_CHECKSUM_ERROR (1 << 15)
+#define TX_DSI_DATA_TYPE_NOT_RECOGNIZED (1 << 16)
+#define TX_DSI_VC_ID_INVALID (1 << 17)
+#define HIGH_CONTENTION (1 << 18)
+#define LOW_CONTENTION (1 << 19)
+#define DPI_FIFO_UNDER_RUN (1 << 20)
+#define HS_TX_TIMEOUT (1 << 21)
+#define LP_RX_TIMEOUT (1 << 22)
+#define TURN_AROUND_ACK_TIMEOUT (1 << 23)
+#define ACK_WITH_NO_ERROR (1 << 24)
+#define HS_GENERIC_WR_FIFO_FULL (1 << 27)
+#define LP_GENERIC_WR_FIFO_FULL (1 << 28)
+#define SPL_PKT_SENT (1 << 30)
#define INTR_EN_REG 0xb008
#define DSI_FUNC_PRG_REG 0xb00c
#define DPI_CHANNEL_NUMBER_POS 0x03
@@ -873,22 +803,22 @@ struct dpst_guardband {
#define VERT_FRONT_PORCH_COUNT_REG 0xb040
#define HIGH_LOW_SWITCH_COUNT_REG 0xb044
#define DPI_CONTROL_REG 0xb048
-#define DPI_SHUT_DOWN BIT0
-#define DPI_TURN_ON BIT1
-#define DPI_COLOR_MODE_ON BIT2
-#define DPI_COLOR_MODE_OFF BIT3
-#define DPI_BACK_LIGHT_ON BIT4
-#define DPI_BACK_LIGHT_OFF BIT5
-#define DPI_LP BIT6
+#define DPI_SHUT_DOWN (1 << 0)
+#define DPI_TURN_ON (1 << 1)
+#define DPI_COLOR_MODE_ON (1 << 2)
+#define DPI_COLOR_MODE_OFF (1 << 3)
+#define DPI_BACK_LIGHT_ON (1 << 4)
+#define DPI_BACK_LIGHT_OFF (1 << 5)
+#define DPI_LP (1 << 6)
#define DPI_DATA_REG 0xb04c
#define DPI_BACK_LIGHT_ON_DATA 0x07
#define DPI_BACK_LIGHT_OFF_DATA 0x17
#define INIT_COUNT_REG 0xb050
#define MAX_RET_PAK_REG 0xb054
#define VIDEO_FMT_REG 0xb058
-#define COMPLETE_LAST_PCKT BIT2
+#define COMPLETE_LAST_PCKT (1 << 2)
#define EOT_DISABLE_REG 0xb05c
-#define ENABLE_CLOCK_STOPPING BIT1
+#define ENABLE_CLOCK_STOPPING (1 << 1)
#define LP_BYTECLK_REG 0xb060
#define LP_GEN_DATA_REG 0xb064
#define HS_GEN_DATA_REG 0xb068
@@ -899,30 +829,31 @@ struct dpst_guardband {
#define WORD_COUNTS_POS 0x8
#define MCS_PARAMETER_POS 0x10
#define GEN_FIFO_STAT_REG 0xb074
-#define HS_DATA_FIFO_FULL BIT0
-#define HS_DATA_FIFO_HALF_EMPTY BIT1
-#define HS_DATA_FIFO_EMPTY BIT2
-#define LP_DATA_FIFO_FULL BIT8
-#define LP_DATA_FIFO_HALF_EMPTY BIT9
-#define LP_DATA_FIFO_EMPTY BIT10
-#define HS_CTRL_FIFO_FULL BIT16
-#define HS_CTRL_FIFO_HALF_EMPTY BIT17
-#define HS_CTRL_FIFO_EMPTY BIT18
-#define LP_CTRL_FIFO_FULL BIT24
-#define LP_CTRL_FIFO_HALF_EMPTY BIT25
-#define LP_CTRL_FIFO_EMPTY BIT26
-#define DBI_FIFO_EMPTY BIT27
-#define DPI_FIFO_EMPTY BIT28
+#define HS_DATA_FIFO_FULL (1 << 0)
+#define HS_DATA_FIFO_HALF_EMPTY (1 << 1)
+#define HS_DATA_FIFO_EMPTY (1 << 2)
+#define LP_DATA_FIFO_FULL (1 << 8)
+#define LP_DATA_FIFO_HALF_EMPTY (1 << 9)
+#define LP_DATA_FIFO_EMPTY (1 << 10)
+#define HS_CTRL_FIFO_FULL (1 << 16)
+#define HS_CTRL_FIFO_HALF_EMPTY (1 << 17)
+#define HS_CTRL_FIFO_EMPTY (1 << 18)
+#define LP_CTRL_FIFO_FULL (1 << 24)
+#define LP_CTRL_FIFO_HALF_EMPTY (1 << 25)
+#define LP_CTRL_FIFO_EMPTY (1 << 26)
+#define DBI_FIFO_EMPTY (1 << 27)
+#define DPI_FIFO_EMPTY (1 << 28)
#define HS_LS_DBI_ENABLE_REG 0xb078
#define TXCLKESC_REG 0xb07c
#define DPHY_PARAM_REG 0xb080
#define DBI_BW_CTRL_REG 0xb084
#define CLK_LANE_SWT_REG 0xb088
-/*===========================================================================
-; MIPI Adapter registers
-;--------------------------------------------------------------------------*/
+
+/*
+ * MIPI Adapter registers
+ */
#define MIPI_CONTROL_REG 0xb104
-#define MIPI_2X_CLOCK_BITS (BIT0 | BIT1)
+#define MIPI_2X_CLOCK_BITS ((1 << 0) | (1 << 1))
#define MIPI_DATA_ADDRESS_REG 0xb108
#define MIPI_DATA_LENGTH_REG 0xb10C
#define MIPI_COMMAND_ADDRESS_REG 0xb110
@@ -938,75 +869,76 @@ struct dpst_guardband {
#define MIPI_READ_DATA_VALID_REG 0xb138
/* DBI COMMANDS */
#define soft_reset 0x01
-/* ************************************************************************* *\
-The display module performs a software reset.
-Registers are written with their SW Reset default values.
-\* ************************************************************************* */
+/*
+ * The display module performs a software reset.
+ * Registers are written with their SW Reset default values.
+ */
#define get_power_mode 0x0a
-/* ************************************************************************* *\
-The display module returns the current power mode
-\* ************************************************************************* */
+/*
+ * The display module returns the current power mode
+ */
#define get_address_mode 0x0b
-/* ************************************************************************* *\
-The display module returns the current status.
-\* ************************************************************************* */
+/*
+ * The display module returns the current status.
+ */
#define get_pixel_format 0x0c
-/* ************************************************************************* *\
-This command gets the pixel format for the RGB image data
-used by the interface.
-\* ************************************************************************* */
+/*
+ * This command gets the pixel format for the RGB image data
+ * used by the interface.
+ */
#define get_display_mode 0x0d
-/* ************************************************************************* *\
-The display module returns the Display Image Mode status.
-\* ************************************************************************* */
+/*
+ * The display module returns the Display Image Mode status.
+ */
#define get_signal_mode 0x0e
-/* ************************************************************************* *\
-The display module returns the Display Signal Mode.
-\* ************************************************************************* */
+/*
+ * The display module returns the Display Signal Mode.
+ */
#define get_diagnostic_result 0x0f
-/* ************************************************************************* *\
-The display module returns the self-diagnostic results following
-a Sleep Out command.
-\* ************************************************************************* */
+/*
+ * The display module returns the self-diagnostic results following
+ * a Sleep Out command.
+ */
#define enter_sleep_mode 0x10
-/* ************************************************************************* *\
-This command causes the display module to enter the Sleep mode.
-In this mode, all unnecessary blocks inside the display module are disabled
-except interface communication. This is the lowest power mode
-the display module supports.
-\* ************************************************************************* */
+/*
+ * This command causes the display module to enter the Sleep mode.
+ * In this mode, all unnecessary blocks inside the display module are
+ * disabled except interface communication. This is the lowest power
+ * mode the display module supports.
+ */
#define exit_sleep_mode 0x11
-/* ************************************************************************* *\
-This command causes the display module to exit Sleep mode.
-All blocks inside the display module are enabled.
-\* ************************************************************************* */
+/*
+ * This command causes the display module to exit Sleep mode.
+ * All blocks inside the display module are enabled.
+ */
#define enter_partial_mode 0x12
-/* ************************************************************************* *\
-This command causes the display module to enter the Partial Display Mode.
-The Partial Display Mode window is described by the set_partial_area command.
-\* ************************************************************************* */
+/*
+ * This command causes the display module to enter the Partial Display
+ * Mode. The Partial Display Mode window is described by the
+ * set_partial_area command.
+ */
#define enter_normal_mode 0x13
-/* ************************************************************************* *\
-This command causes the display module to enter the Normal mode.
-Normal Mode is defined as Partial Display mode and Scroll mode are off
-\* ************************************************************************* */
+/*
+ * This command causes the display module to enter the Normal mode.
+ * Normal Mode is defined as Partial Display mode and Scroll mode are off
+ */
#define exit_invert_mode 0x20
-/* ************************************************************************* *\
-This command causes the display module to stop inverting the image data on
-the display device. The frame memory contents remain unchanged.
-No status bits are changed.
-\* ************************************************************************* */
+/*
+ * This command causes the display module to stop inverting the image
+ * data on the display device. The frame memory contents remain unchanged.
+ * No status bits are changed.
+ */
#define enter_invert_mode 0x21
-/* ************************************************************************* *\
-This command causes the display module to invert the image data only on
-the display device. The frame memory contents remain unchanged.
-No status bits are changed.
-\* ************************************************************************* */
+/*
+ * This command causes the display module to invert the image data only on
+ * the display device. The frame memory contents remain unchanged.
+ * No status bits are changed.
+ */
#define set_gamma_curve 0x26
-/* ************************************************************************* *\
-This command selects the desired gamma curve for the display device.
-Four fixed gamma curves are defined in section DCS spec.
-\* ************************************************************************* */
+/*
+ * This command selects the desired gamma curve for the display device.
+ * Four fixed gamma curves are defined in section DCS spec.
+ */
#define set_display_off 0x28
/* ************************************************************************* *\
This command causes the display module to stop displaying the image data
@@ -1020,77 +952,80 @@ on the display device. The frame memory contents remain unchanged.
No status bits are changed.
\* ************************************************************************* */
#define set_column_address 0x2a
-/* ************************************************************************* *\
-This command defines the column extent of the frame memory accessed by the
-hostprocessor with the read_memory_continue and write_memory_continue commands.
-No status bits are changed.
-\* ************************************************************************* */
+/*
+ * This command defines the column extent of the frame memory accessed by
+ * the hostprocessor with the read_memory_continue and
+ * write_memory_continue commands.
+ * No status bits are changed.
+ */
#define set_page_addr 0x2b
-/* ************************************************************************* *\
-This command defines the page extent of the frame memory accessed by the host
-processor with the write_memory_continue and read_memory_continue command.
-No status bits are changed.
-\* ************************************************************************* */
+/*
+ * This command defines the page extent of the frame memory accessed by
+ * the host processor with the write_memory_continue and
+ * read_memory_continue command.
+ * No status bits are changed.
+ */
#define write_mem_start 0x2c
-/* ************************************************************************* *\
-This command transfers image data from the host processor to the display
-module s frame memory starting at the pixel location specified by
-preceding set_column_address and set_page_address commands.
-\* ************************************************************************* */
+/*
+ * This command transfers image data from the host processor to the
+ * display module s frame memory starting at the pixel location specified
+ * by preceding set_column_address and set_page_address commands.
+ */
#define set_partial_area 0x30
-/* ************************************************************************* *\
-This command defines the Partial Display mode s display area.
-There are two parameters associated with
-this command, the first defines the Start Row (SR) and the second the End Row
-(ER). SR and ER refer to the Frame Memory Line Pointer.
-\* ************************************************************************* */
+/*
+ * This command defines the Partial Display mode s display area.
+ * There are two parameters associated with this command, the first
+ * defines the Start Row (SR) and the second the End Row (ER). SR and ER
+ * refer to the Frame Memory Line Pointer.
+ */
#define set_scroll_area 0x33
-/* ************************************************************************* *\
-This command defines the display modules Vertical Scrolling Area.
-\* ************************************************************************* */
+/*
+ * This command defines the display modules Vertical Scrolling Area.
+ */
#define set_tear_off 0x34
-/* ************************************************************************* *\
-This command turns off the display modules Tearing Effect output signal on
-the TE signal line.
-\* ************************************************************************* */
+/*
+ * This command turns off the display modules Tearing Effect output
+ * signal on the TE signal line.
+ */
#define set_tear_on 0x35
-/* ************************************************************************* *\
-This command turns on the display modules Tearing Effect output signal
-on the TE signal line.
-\* ************************************************************************* */
+/*
+ * This command turns on the display modules Tearing Effect output signal
+ * on the TE signal line.
+ */
#define set_address_mode 0x36
-/* ************************************************************************* *\
-This command sets the data order for transfers from the host processor to
-display modules frame memory,bits B[7:5] and B3, and from the display
-modules frame memory to the display device, bits B[2:0] and B4.
-\* ************************************************************************* */
+/*
+ * This command sets the data order for transfers from the host processor
+ * to display modules frame memory,bits B[7:5] and B3, and from the
+ * display modules frame memory to the display device, bits B[2:0] and B4.
+ */
#define set_scroll_start 0x37
-/* ************************************************************************* *\
-This command sets the start of the vertical scrolling area in the frame memory.
-The vertical scrolling area is fully defined when this command is used with
-the set_scroll_area command The set_scroll_start command has one parameter,
-the Vertical Scroll Pointer. The VSP defines the line in the frame memory
-that is written to the display device as the first line of the vertical
-scroll area.
-\* ************************************************************************* */
+/*
+ * This command sets the start of the vertical scrolling area in the frame
+ * memory. The vertical scrolling area is fully defined when this command
+ * is used with the set_scroll_area command The set_scroll_start command
+ * has one parameter, the Vertical Scroll Pointer. The VSP defines the
+ * line in the frame memory that is written to the display device as the
+ * first line of the vertical scroll area.
+ */
#define exit_idle_mode 0x38
-/* ************************************************************************* *\
-This command causes the display module to exit Idle mode.
-\* ************************************************************************* */
+/*
+ * This command causes the display module to exit Idle mode.
+ */
#define enter_idle_mode 0x39
-/* ************************************************************************* *\
-This command causes the display module to enter Idle Mode.
-In Idle Mode, color expression is reduced. Colors are shown on the display
-device using the MSB of each of the R, G and B color components in the frame
-memory
-\* ************************************************************************* */
+/*
+ * This command causes the display module to enter Idle Mode.
+ * In Idle Mode, color expression is reduced. Colors are shown on the
+ * display device using the MSB of each of the R, G and B color
+ * components in the frame memory
+ */
#define set_pixel_format 0x3a
-/* ************************************************************************* *\
-This command sets the pixel format for the RGB image data used by the interface.
-Bits D[6:4] DPI Pixel Format Definition
-Bits D[2:0] DBI Pixel Format Definition
-Bits D7 and D3 are not used.
-\* ************************************************************************* */
+/*
+ * This command sets the pixel format for the RGB image data used by the
+ * interface.
+ * Bits D[6:4] DPI Pixel Format Definition
+ * Bits D[2:0] DBI Pixel Format Definition
+ * Bits D7 and D3 are not used.
+ */
#define DCS_PIXEL_FORMAT_3bbp 0x1
#define DCS_PIXEL_FORMAT_8bbp 0x2
#define DCS_PIXEL_FORMAT_12bbp 0x3
@@ -1098,24 +1033,25 @@ Bits D7 and D3 are not used.
#define DCS_PIXEL_FORMAT_18bbp 0x6
#define DCS_PIXEL_FORMAT_24bbp 0x7
#define write_mem_cont 0x3c
-/* ************************************************************************* *\
-This command transfers image data from the host processor to the display
-module's frame memory continuing from the pixel location following the
-previous write_memory_continue or write_memory_start command.
-\* ************************************************************************* */
+/*
+ * This command transfers image data from the host processor to the
+ * display module's frame memory continuing from the pixel location
+ * following the previous write_memory_continue or write_memory_start
+ * command.
+ */
#define set_tear_scanline 0x44
-/* ************************************************************************* *\
-This command turns on the display modules Tearing Effect output signal on the
-TE signal line when the display module reaches line N.
-\* ************************************************************************* */
+/*
+ * This command turns on the display modules Tearing Effect output signal
+ * on the TE signal line when the display module reaches line N.
+ */
#define get_scanline 0x45
-/* ************************************************************************* *\
-The display module returns the current scanline, N, used to update the
-display device. The total number of scanlines on a display device is
-defined as VSYNC + VBP + VACT + VFP.The first scanline is defined as
-the first line of V Sync and is denoted as Line 0.
-When in Sleep Mode, the value returned by get_scanline is undefined.
-\* ************************************************************************* */
+/*
+ * The display module returns the current scanline, N, used to update the
+ * display device. The total number of scanlines on a display device is
+ * defined as VSYNC + VBP + VACT + VFP.The first scanline is defined as
+ * the first line of V Sync and is denoted as Line 0.
+ * When in Sleep Mode, the value returned by get_scanline is undefined.
+ */
/* MCS or Generic COMMANDS */
/* MCS/generic data type */
@@ -1131,7 +1067,7 @@ When in Sleep Mode, the value returned by get_scanline is undefined.
#define MCS_READ 0x06 /* MCS read, no parameters */
#define MCS_LONG_WRITE 0x39 /* MCS long write */
/* MCS/generic commands */
-/*****TPO MCS**********/
+/* TPO MCS */
#define write_display_profile 0x50
#define write_display_brightness 0x51
#define write_ctrl_display 0x53
@@ -1143,19 +1079,19 @@ When in Sleep Mode, the value returned by get_scanline is undefined.
#define write_gamma_setting 0x58
#define write_cabc_min_bright 0x5e
#define write_kbbc_profile 0x60
-/*****TMD MCS**************/
+/* TMD MCS */
#define tmd_write_display_brightness 0x8c
-/* ************************************************************************* *\
-This command is used to control ambient light, panel backlight brightness and
-gamma settings.
-\* ************************************************************************* */
-#define BRIGHT_CNTL_BLOCK_ON BIT5
-#define AMBIENT_LIGHT_SENSE_ON BIT4
-#define DISPLAY_DIMMING_ON BIT3
-#define BACKLIGHT_ON BIT2
-#define DISPLAY_BRIGHTNESS_AUTO BIT1
-#define GAMMA_AUTO BIT0
+/*
+ * This command is used to control ambient light, panel backlight
+ * brightness and gamma settings.
+ */
+#define BRIGHT_CNTL_BLOCK_ON (1 << 5)
+#define AMBIENT_LIGHT_SENSE_ON (1 << 4)
+#define DISPLAY_DIMMING_ON (1 << 3)
+#define BACKLIGHT_ON (1 << 2)
+#define DISPLAY_BRIGHTNESS_AUTO (1 << 1)
+#define GAMMA_AUTO (1 << 0)
/* DCS Interface Pixel Formats */
#define DCS_PIXEL_FORMAT_3BPP 0x1
@@ -1190,8 +1126,9 @@ gamma settings.
* byte alignment
*/
#define DBI_CB_TIME_OUT 0xFFFF
-#define GEN_FB_TIME_OUT 2000
-#define ALIGNMENT_32BYTE_MASK (~(BIT0|BIT1|BIT2|BIT3|BIT4))
+
+#define GEN_FB_TIME_OUT 2000
+#define ALIGNMENT_32BYTE_MASK (~((1 << 0)|(1 << 1)|(1 << 2)|(1 << 3)|(1 << 4)))
#define SKU_83 0x01
#define SKU_100 0x02
#define SKU_100L 0x04
diff --git a/drivers/staging/gma500/psb_irq.c b/drivers/staging/gma500/psb_irq.c
index ce7dbf4..4597c88 100644
--- a/drivers/staging/gma500/psb_irq.c
+++ b/drivers/staging/gma500/psb_irq.c
@@ -422,9 +422,9 @@ void psb_irq_turn_on_dpst(struct drm_device *dev)
if (ospm_power_using_hw_begin(OSPM_DISPLAY_ISLAND,
OSPM_UHB_ONLY_IF_ON)) {
- PSB_WVDC32(BIT31, HISTOGRAM_LOGIC_CONTROL);
+ PSB_WVDC32(1 << 31, HISTOGRAM_LOGIC_CONTROL);
hist_reg = PSB_RVDC32(HISTOGRAM_LOGIC_CONTROL);
- PSB_WVDC32(BIT31, HISTOGRAM_INT_CONTROL);
+ PSB_WVDC32(1 << 31, HISTOGRAM_INT_CONTROL);
hist_reg = PSB_RVDC32(HISTOGRAM_INT_CONTROL);
PSB_WVDC32(0x80010100, PWM_CONTROL_LOGIC);
diff --git a/drivers/staging/gma500/psb_powermgmt.c b/drivers/staging/gma500/psb_powermgmt.c
index 39fa66a..7deb1ba 100644
--- a/drivers/staging/gma500/psb_powermgmt.c
+++ b/drivers/staging/gma500/psb_powermgmt.c
@@ -287,11 +287,6 @@ static void ospm_suspend_pci(struct pci_dev *pdev)
printk(KERN_ALERT "ospm_suspend_pci\n");
#endif
-#ifdef CONFIG_MDFD_GL3
- // Power off GL3 after all GFX sub-systems are powered off.
- ospm_power_island_down(OSPM_GL3_CACHE_ISLAND);
-#endif
-
pci_save_state(pdev);
pci_read_config_dword(pdev, 0x5C, &bsm);
dev_priv->saveBSM = bsm;
--
1.7.4.1
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
