Checkpatch emits several errors regarding braces being on the incorrect
line. These can be fixed by moving the brace, do this. In a few cases,
some comments were moved to facilitate this.
Signed-off-by: Stephen Brennan <stephen@xxxxxxxxxx>
---
.../staging/rtl8192u/ieee80211/ieee80211.h | 3 +-
.../staging/rtl8192u/ieee80211/ieee80211_rx.c | 116 ++++++------------
.../staging/rtl8192u/ieee80211/ieee80211_tx.c | 81 +++++-------
.../staging/rtl8192u/ieee80211/ieee80211_wx.c | 3 +-
.../staging/rtl8192u/ieee80211/rtl819x_HT.h | 3 +-
5 files changed, 73 insertions(+), 133 deletions(-)
diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211.h b/drivers/staging/rtl8192u/ieee80211/ieee80211.h
index 3963a08b9eb2..129dcb5a0f2e 100644
--- a/drivers/staging/rtl8192u/ieee80211/ieee80211.h
+++ b/drivers/staging/rtl8192u/ieee80211/ieee80211.h
@@ -458,8 +458,7 @@ do { if (ieee80211_debug_level & (level)) \
int i; \
u8 *pdata = (u8 *) data; \
printk(KERN_DEBUG "ieee80211: %s()\n", __func__); \
- for (i = 0; i < (int)(datalen); i++) \
- { \
+ for (i = 0; i < (int)(datalen); i++) { \
printk("%2x ", pdata[i]); \
if ((i + 1) % 16 == 0) printk("\n"); \
} \
diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c b/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c
index 7ef1e89de269..9d8b2ff700fe 100644
--- a/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c
+++ b/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c
@@ -218,8 +218,8 @@ ieee80211_rx_frame_mgmt(struct ieee80211_device *ieee, struct sk_buff *skb,
rx_stats->len = skb->len;
ieee80211_rx_mgt(ieee, (struct rtl_80211_hdr_4addr *)skb->data, rx_stats);
/* if ((ieee->state == IEEE80211_LINKED) && (memcmp(hdr->addr3, ieee->current_network.bssid, ETH_ALEN))) */
- if ((memcmp(hdr->addr1, ieee->dev->dev_addr, ETH_ALEN)))/* use ADDR1 to perform address matching for Management frames */
- {
+ if ((memcmp(hdr->addr1, ieee->dev->dev_addr, ETH_ALEN))) {
+ /* use ADDR1 to perform address matching for Management frames */
dev_kfree_skb_any(skb);
return 0;
}
@@ -339,8 +339,7 @@ ieee80211_rx_frame_decrypt(struct ieee80211_device *ieee, struct sk_buff *skb,
if (!crypt || !crypt->ops->decrypt_mpdu)
return 0;
- if (ieee->hwsec_active)
- {
+ if (ieee->hwsec_active) {
struct cb_desc *tcb_desc = (struct cb_desc *)(skb->cb + MAX_DEV_ADDR_SIZE);
tcb_desc->bHwSec = 1;
}
@@ -386,8 +385,7 @@ ieee80211_rx_frame_decrypt_msdu(struct ieee80211_device *ieee, struct sk_buff *s
if (!crypt || !crypt->ops->decrypt_msdu)
return 0;
- if (ieee->hwsec_active)
- {
+ if (ieee->hwsec_active) {
struct cb_desc *tcb_desc = (struct cb_desc *)(skb->cb + MAX_DEV_ADDR_SIZE);
tcb_desc->bHwSec = 1;
}
@@ -507,8 +505,7 @@ static int is_duplicate_packet(struct ieee80211_device *ieee,
static bool AddReorderEntry(struct rx_ts_record *pTS, struct rx_reorder_entry *pReorderEntry)
{
struct list_head *pList = &pTS->rx_pending_pkt_list;
- while (pList->next != &pTS->rx_pending_pkt_list)
- {
+ while (pList->next != &pTS->rx_pending_pkt_list) {
if (SN_LESS(pReorderEntry->SeqNum, list_entry(pList->next, struct rx_reorder_entry, List)->SeqNum))
pList = pList->next;
else if (SN_EQUAL(pReorderEntry->SeqNum, list_entry(pList->next, struct rx_reorder_entry, List)->SeqNum))
@@ -530,8 +527,7 @@ void ieee80211_indicate_packets(struct ieee80211_device *ieee, struct ieee80211_
u16 ethertype;
// if(index > 1)
// IEEE80211_DEBUG(IEEE80211_DL_REORDER,"%s(): hahahahhhh, We indicate packet from reorder list, index is %u\n",__func__,index);
- for (j = 0; j < index; j++)
- {
+ for (j = 0; j < index; j++) {
//added by amy for reorder
struct ieee80211_rxb *prxb = prxbIndicateArray[j];
for (i = 0; i < prxb->nr_subframes; i++) {
@@ -699,8 +695,7 @@ static void RxReorderIndicatePacket(struct ieee80211_device *ieee,
IEEE80211_DEBUG(IEEE80211_DL_REORDER, "%s(): start RREORDER indicate\n", __func__);
pReorderEntry = list_entry(pTS->rx_pending_pkt_list.prev, struct rx_reorder_entry, List);
if (SN_LESS(pReorderEntry->SeqNum, pTS->rx_indicate_seq) ||
- SN_EQUAL(pReorderEntry->SeqNum, pTS->rx_indicate_seq))
- {
+ SN_EQUAL(pReorderEntry->SeqNum, pTS->rx_indicate_seq)) {
/* This protect buffer from overflow. */
if (index >= REORDER_WIN_SIZE) {
IEEE80211_DEBUG(IEEE80211_DL_ERR, "RxReorderIndicatePacket(): Buffer overflow!! \n");
@@ -922,8 +917,7 @@ int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb,
frag = WLAN_GET_SEQ_FRAG(sc);
hdrlen = ieee80211_get_hdrlen(fc);
- if (HTCCheck(ieee, skb->data))
- {
+ if (HTCCheck(ieee, skb->data)) {
if (net_ratelimit())
printk("find HTCControl\n");
hdrlen += 4;
@@ -1010,8 +1004,7 @@ int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb,
hdr->addr2,
Frame_QoSTID((u8 *)(skb->data)),
RX_DIR,
- true))
- {
+ true)) {
// IEEE80211_DEBUG(IEEE80211_DL_REORDER,"%s(): pRxTS->rx_last_frag_num is %d,frag is %d,pRxTS->rx_last_seq_num is %d,seq is %d\n",__func__,pRxTS->rx_last_frag_num,frag,pRxTS->rx_last_seq_num,WLAN_GET_SEQ_SEQ(sc));
if ((fc & (1 << 11)) &&
@@ -1119,8 +1112,7 @@ int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb,
/* skb: hdr + (possibly fragmented, possibly encrypted) payload */
if (ieee->host_decrypt && (fc & IEEE80211_FCTL_WEP) &&
- (keyidx = ieee80211_rx_frame_decrypt(ieee, skb, crypt)) < 0)
- {
+ (keyidx = ieee80211_rx_frame_decrypt(ieee, skb, crypt)) < 0) {
printk("decrypt frame error\n");
goto rx_dropped;
}
@@ -1185,8 +1177,7 @@ int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb,
/* skb: hdr + (possible reassembled) full MSDU payload; possibly still
* encrypted/authenticated */
if (ieee->host_decrypt && (fc & IEEE80211_FCTL_WEP) &&
- ieee80211_rx_frame_decrypt_msdu(ieee, skb, keyidx, crypt))
- {
+ ieee80211_rx_frame_decrypt_msdu(ieee, skb, keyidx, crypt)) {
printk("==>decrypt msdu error\n");
goto rx_dropped;
}
@@ -1243,13 +1234,11 @@ int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb,
*/
//added by amy for reorder
if (ieee->current_network.qos_data.active && IsQoSDataFrame(skb->data)
- && !is_multicast_ether_addr(hdr->addr1))
- {
+ && !is_multicast_ether_addr(hdr->addr1)) {
TID = Frame_QoSTID(skb->data);
SeqNum = WLAN_GET_SEQ_SEQ(sc);
GetTs(ieee, (struct ts_common_info **) &pTS, hdr->addr2, TID, RX_DIR, true);
- if (TID != 0 && TID != 3)
- {
+ if (TID != 0 && TID != 3) {
ieee->bis_any_nonbepkts = true;
}
}
@@ -1549,15 +1538,12 @@ static inline void ieee80211_extract_country_ie(
u8 *addr2
)
{
- if (IS_DOT11D_ENABLE(ieee))
- {
- if (info_element->len != 0)
- {
+ if (IS_DOT11D_ENABLE(ieee)) {
+ if (info_element->len != 0) {
memcpy(network->CountryIeBuf, info_element->data, info_element->len);
network->CountryIeLen = info_element->len;
- if (!IS_COUNTRY_IE_VALID(ieee))
- {
+ if (!IS_COUNTRY_IE_VALID(ieee)) {
dot11d_update_country_ie(ieee, addr2, info_element->len, info_element->data);
}
}
@@ -1567,8 +1553,7 @@ static inline void ieee80211_extract_country_ie(
// some AP (e.g. Cisco 1242) don't include country IE in their
// probe response frame.
//
- if (IS_EQUAL_CIE_SRC(ieee, addr2))
- {
+ if (IS_EQUAL_CIE_SRC(ieee, addr2)) {
UPDATE_CIE_WATCHDOG(ieee);
}
}
@@ -1865,8 +1850,7 @@ int ieee80211_parse_info_param(struct ieee80211_device *ieee,
if (info_element->len >= 3 &&
info_element->data[0] == 0x00 &&
info_element->data[1] == 0x0c &&
- info_element->data[2] == 0x43)
- {
+ info_element->data[2] == 0x43) {
network->ralink_cap_exist = true;
} else
network->ralink_cap_exist = false;
@@ -1878,8 +1862,7 @@ int ieee80211_parse_info_param(struct ieee80211_device *ieee,
(info_element->len >= 3 &&
info_element->data[0] == 0x00 &&
info_element->data[1] == 0x13 &&
- info_element->data[2] == 0x74))
- {
+ info_element->data[2] == 0x74)) {
printk("========>%s(): athros AP is exist\n", __func__);
network->atheros_cap_exist = true;
} else
@@ -1888,8 +1871,7 @@ int ieee80211_parse_info_param(struct ieee80211_device *ieee,
if (info_element->len >= 3 &&
info_element->data[0] == 0x00 &&
info_element->data[1] == 0x40 &&
- info_element->data[2] == 0x96)
- {
+ info_element->data[2] == 0x96) {
network->cisco_cap_exist = true;
} else
network->cisco_cap_exist = false;
@@ -1898,22 +1880,18 @@ int ieee80211_parse_info_param(struct ieee80211_device *ieee,
info_element->data[0] == 0x00 &&
info_element->data[1] == 0x40 &&
info_element->data[2] == 0x96 &&
- info_element->data[3] == 0x01)
- {
- if (info_element->len == 6)
- {
+ info_element->data[3] == 0x01) {
+ if (info_element->len == 6) {
memcpy(network->CcxRmState, &info_element[4], 2);
if (network->CcxRmState[0] != 0)
- {
network->bCcxRmEnable = true;
- } else
+ else
network->bCcxRmEnable = false;
//
// CCXv4 Table 59-1 MBSSID Masks.
//
network->MBssidMask = network->CcxRmState[1] & 0x07;
- if (network->MBssidMask != 0)
- {
+ if (network->MBssidMask != 0) {
network->bMBssidValid = true;
network->MBssidMask = 0xff << (network->MBssidMask);
ether_addr_copy(network->MBssid, network->bssid);
@@ -1929,8 +1907,7 @@ int ieee80211_parse_info_param(struct ieee80211_device *ieee,
info_element->data[0] == 0x00 &&
info_element->data[1] == 0x40 &&
info_element->data[2] == 0x96 &&
- info_element->data[3] == 0x03)
- {
+ info_element->data[3] == 0x03) {
if (info_element->len == 5) {
network->bWithCcxVerNum = true;
network->BssCcxVerNumber = info_element->data[4];
@@ -1985,16 +1962,14 @@ int ieee80211_parse_info_param(struct ieee80211_device *ieee,
case MFIE_TYPE_AIRONET:
IEEE80211_DEBUG_SCAN("MFIE_TYPE_AIRONET: %d bytes\n",
info_element->len);
- if (info_element->len > IE_CISCO_FLAG_POSITION)
- {
+ if (info_element->len > IE_CISCO_FLAG_POSITION) {
network->bWithAironetIE = true;
// CCX 1 spec v1.13, A01.1 CKIP Negotiation (page23):
// "A Cisco access point advertises support for CKIP in beacon and probe response packets,
// by adding an Aironet element and setting one or both of the CKIP negotiation bits."
if ((info_element->data[IE_CISCO_FLAG_POSITION] & SUPPORT_CKIP_MIC) ||
- (info_element->data[IE_CISCO_FLAG_POSITION] & SUPPORT_CKIP_PK))
- {
+ (info_element->data[IE_CISCO_FLAG_POSITION] & SUPPORT_CKIP_PK)) {
network->bCkipSupported = true;
} else {
network->bCkipSupported = false;
@@ -2214,8 +2189,7 @@ static inline void update_network(struct ieee80211_network *dst,
dst->rates_len = src->rates_len;
memcpy(dst->rates_ex, src->rates_ex, src->rates_ex_len);
dst->rates_ex_len = src->rates_ex_len;
- if (src->ssid_len > 0)
- {
+ if (src->ssid_len > 0) {
memset(dst->ssid, 0, dst->ssid_len);
dst->ssid_len = src->ssid_len;
memcpy(dst->ssid, src->ssid, src->ssid_len);
@@ -2224,8 +2198,7 @@ static inline void update_network(struct ieee80211_network *dst,
dst->flags = src->flags;
dst->time_stamp[0] = src->time_stamp[0];
dst->time_stamp[1] = src->time_stamp[1];
- if (src->flags & NETWORK_HAS_ERP_VALUE)
- {
+ if (src->flags & NETWORK_HAS_ERP_VALUE) {
dst->erp_value = src->erp_value;
dst->berp_info_valid = src->berp_info_valid = true;
}
@@ -2379,41 +2352,33 @@ static inline void ieee80211_process_probe_response(
if (!is_legal_channel(ieee, network->channel))
goto out;
- if (ieee->bGlobalDomain)
- {
- if (fc == IEEE80211_STYPE_PROBE_RESP)
- {
- // Case 1: Country code
+ if (ieee->bGlobalDomain) {
+ if (fc == IEEE80211_STYPE_PROBE_RESP) {
if (IS_COUNTRY_IE_VALID(ieee)) {
+ // Case 1: Country code
if (!is_legal_channel(ieee, network->channel)) {
printk("GetScanInfo(): For Country code, filter probe response at channel(%d).\n", network->channel);
goto out;
}
- }
- // Case 2: No any country code.
- else
- {
+ } else {
+ // Case 2: No any country code.
// Filter over channel ch12~14
- if (network->channel > 11)
- {
+ if (network->channel > 11) {
printk("GetScanInfo(): For Global Domain, filter probe response at channel(%d).\n", network->channel);
goto out;
}
}
} else {
- // Case 1: Country code
if (IS_COUNTRY_IE_VALID(ieee)) {
+ // Case 1: Country code
if (!is_legal_channel(ieee, network->channel)) {
printk("GetScanInfo(): For Country code, filter beacon at channel(%d).\n", network->channel);
goto out;
}
- }
- // Case 2: No any country code.
- else
- {
+ } else {
+ // Case 2: No any country code.
// Filter over channel ch12~14
- if (network->channel > 14)
- {
+ if (network->channel > 14) {
printk("GetScanInfo(): For Global Domain, filter beacon at channel(%d).\n", network->channel);
goto out;
}
@@ -2442,8 +2407,7 @@ static inline void ieee80211_process_probe_response(
else
ieee->current_network.buseprotection = false;
}
- if (is_beacon(beacon->header.frame_ctl))
- {
+ if (is_beacon(beacon->header.frame_ctl)) {
if (ieee->state == IEEE80211_LINKED)
ieee->LinkDetectInfo.NumRecvBcnInPeriod++;
} else //hidden AP
diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211_tx.c b/drivers/staging/rtl8192u/ieee80211/ieee80211_tx.c
index fc6eb97801e1..c49357067735 100644
--- a/drivers/staging/rtl8192u/ieee80211/ieee80211_tx.c
+++ b/drivers/staging/rtl8192u/ieee80211/ieee80211_tx.c
@@ -214,7 +214,8 @@ int ieee80211_encrypt_fragment(
}
-void ieee80211_txb_free(struct ieee80211_txb *txb) {
+void ieee80211_txb_free(struct ieee80211_txb *txb)
+{
//int i;
if (unlikely(!txb))
return;
@@ -333,8 +334,7 @@ static void ieee80211_tx_query_agg_cap(struct ieee80211_device *ieee,
}
}
FORCED_AGG_SETTING:
- switch (pHTInfo->ForcedAMPDUMode )
- {
+ switch (pHTInfo->ForcedAMPDUMode ) {
case HT_AGG_AUTO:
break;
@@ -424,19 +424,15 @@ static void ieee80211_query_protectionmode(struct ieee80211_device *ieee,
if (is_broadcast_ether_addr(skb->data+16)) //check addr3 as infrastructure add3 is DA.
return;
- if (ieee->mode < IEEE_N_24G) //b, g mode
- {
+ if (ieee->mode < IEEE_N_24G) /* b, g mode */ {
// (1) RTS_Threshold is compared to the MPDU, not MSDU.
// (2) If there are more than one frag in this MSDU, only the first frag uses protection frame.
// Other fragments are protected by previous fragment.
// So we only need to check the length of first fragment.
- if (skb->len > ieee->rts)
- {
+ if (skb->len > ieee->rts) {
tcb_desc->bRTSEnable = true;
tcb_desc->rts_rate = MGN_24M;
- }
- else if (ieee->current_network.buseprotection)
- {
+ } else if (ieee->current_network.buseprotection) {
// Use CTS-to-SELF in protection mode.
tcb_desc->bRTSEnable = true;
tcb_desc->bCTSEnable = true;
@@ -444,43 +440,35 @@ static void ieee80211_query_protectionmode(struct ieee80211_device *ieee,
}
//otherwise return;
return;
- }
- else
- {// 11n High throughput case.
+ } else { // 11n High throughput case.
PRT_HIGH_THROUGHPUT pHTInfo = ieee->pHTInfo;
- while (true)
- {
+ while (true) {
//check ERP protection
- if (ieee->current_network.buseprotection)
- {// CTS-to-SELF
+ if (ieee->current_network.buseprotection) {// CTS-to-SELF
tcb_desc->bRTSEnable = true;
tcb_desc->bCTSEnable = true;
tcb_desc->rts_rate = MGN_24M;
break;
}
//check HT op mode
- if(pHTInfo->bCurrentHTSupport && pHTInfo->bEnableHT)
- {
+ if(pHTInfo->bCurrentHTSupport && pHTInfo->bEnableHT) {
u8 HTOpMode = pHTInfo->CurrentOpMode;
if((pHTInfo->bCurBW40MHz && (HTOpMode == 2 || HTOpMode == 3)) ||
- (!pHTInfo->bCurBW40MHz && HTOpMode == 3) )
- {
+ (!pHTInfo->bCurBW40MHz && HTOpMode == 3)) {
tcb_desc->rts_rate = MGN_24M; // Rate is 24Mbps.
tcb_desc->bRTSEnable = true;
break;
}
}
//check rts
- if (skb->len > ieee->rts)
- {
+ if (skb->len > ieee->rts) {
tcb_desc->rts_rate = MGN_24M; // Rate is 24Mbps.
tcb_desc->bRTSEnable = true;
break;
}
//to do list: check MIMO power save condition.
//check AMPDU aggregation for TXOP
- if(tcb_desc->bAMPDUEnable)
- {
+ if(tcb_desc->bAMPDUEnable) {
tcb_desc->rts_rate = MGN_24M; // Rate is 24Mbps.
// According to 8190 design, firmware sends CF-End only if RTS/CTS is enabled. However, it degrads
// throughput around 10M, so we disable of this mechanism. 2007.08.03 by Emily
@@ -488,8 +476,7 @@ static void ieee80211_query_protectionmode(struct ieee80211_device *ieee,
break;
}
//check IOT action
- if(pHTInfo->IOTAction & HT_IOT_ACT_FORCED_CTS2SELF)
- {
+ if(pHTInfo->IOTAction & HT_IOT_ACT_FORCED_CTS2SELF) {
tcb_desc->bCTSEnable = true;
tcb_desc->rts_rate = MGN_24M;
tcb_desc->bRTSEnable = true;
@@ -541,8 +528,7 @@ static void ieee80211_txrate_selectmode(struct ieee80211_device *ieee,
if (ieee->bTxUseDriverAssingedRate)
tcb_desc->bTxUseDriverAssingedRate = true;
- if (!tcb_desc->bTxDisableRateFallBack || !tcb_desc->bTxUseDriverAssingedRate)
- {
+ if (!tcb_desc->bTxDisableRateFallBack || !tcb_desc->bTxUseDriverAssingedRate) {
if (ieee->iw_mode == IW_MODE_INFRA || ieee->iw_mode == IW_MODE_ADHOC)
tcb_desc->RATRIndex = 0;
}
@@ -553,11 +539,9 @@ static void ieee80211_query_seqnum(struct ieee80211_device *ieee,
{
if (is_multicast_ether_addr(dst))
return;
- if (IsQoSDataFrame(skb->data)) //we deal qos data only
- {
+ if (IsQoSDataFrame(skb->data)) /* we deal qos data only */ {
struct tx_ts_record *pTS = NULL;
- if (!GetTs(ieee, (struct ts_common_info **)(&pTS), dst, skb->priority, TX_DIR, true))
- {
+ if (!GetTs(ieee, (struct ts_common_info **)(&pTS), dst, skb->priority, TX_DIR, true)) {
return;
}
pTS->tx_cur_seq = (pTS->tx_cur_seq + 1) % 4096;
@@ -749,15 +733,13 @@ int ieee80211_xmit(struct sk_buff *skb, struct net_device *dev)
}
skb_reserve(skb_frag, ieee->tx_headroom);
- if (encrypt){
+ if (encrypt) {
if (ieee->hwsec_active)
tcb_desc->bHwSec = 1;
else
tcb_desc->bHwSec = 0;
skb_reserve(skb_frag, crypt->ops->extra_prefix_len);
- }
- else
- {
+ } else {
tcb_desc->bHwSec = 0;
}
frag_hdr = skb_put_data(skb_frag, &header, hdr_len);
@@ -775,8 +757,7 @@ int ieee80211_xmit(struct sk_buff *skb, struct net_device *dev)
bytes = bytes_last_frag;
}
//if(ieee->current_network.QoS_Enable)
- if(qos_actived)
- {
+ if(qos_actived) {
// add 1 only indicate to corresponding seq number control 2006/7/12
frag_hdr->seq_ctl = cpu_to_le16(ieee->seq_ctrl[UP2AC(skb->priority)+1]<<4 | i);
} else {
@@ -806,17 +787,16 @@ int ieee80211_xmit(struct sk_buff *skb, struct net_device *dev)
skb_put(skb_frag, 4);
}
- if(qos_actived)
- {
- if (ieee->seq_ctrl[UP2AC(skb->priority) + 1] == 0xFFF)
- ieee->seq_ctrl[UP2AC(skb->priority) + 1] = 0;
- else
- ieee->seq_ctrl[UP2AC(skb->priority) + 1]++;
+ if (qos_actived) {
+ if (ieee->seq_ctrl[UP2AC(skb->priority) + 1] == 0xFFF)
+ ieee->seq_ctrl[UP2AC(skb->priority) + 1] = 0;
+ else
+ ieee->seq_ctrl[UP2AC(skb->priority) + 1]++;
} else {
- if (ieee->seq_ctrl[0] == 0xFFF)
- ieee->seq_ctrl[0] = 0;
- else
- ieee->seq_ctrl[0]++;
+ if (ieee->seq_ctrl[0] == 0xFFF)
+ ieee->seq_ctrl[0] = 0;
+ else
+ ieee->seq_ctrl[0]++;
}
} else {
if (unlikely(skb->len < sizeof(struct rtl_80211_hdr_3addr))) {
@@ -839,8 +819,7 @@ int ieee80211_xmit(struct sk_buff *skb, struct net_device *dev)
success:
//WB add to fill data tcb_desc here. only first fragment is considered, need to change, and you may remove to other place.
- if (txb)
- {
+ if (txb) {
struct cb_desc *tcb_desc = (struct cb_desc *)(txb->fragments[0]->cb + MAX_DEV_ADDR_SIZE);
tcb_desc->bTxEnableFwCalcDur = 1;
if (is_multicast_ether_addr(header.addr1))
diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211_wx.c b/drivers/staging/rtl8192u/ieee80211/ieee80211_wx.c
index be08cd1d37a7..8ad85331f020 100644
--- a/drivers/staging/rtl8192u/ieee80211/ieee80211_wx.c
+++ b/drivers/staging/rtl8192u/ieee80211/ieee80211_wx.c
@@ -130,8 +130,7 @@ static inline char *rtl819x_translate_scan(struct ieee80211_device *ieee,
max_rate = rate;
}
- if (network->mode >= IEEE_N_24G)//add N rate here;
- {
+ if (network->mode >= IEEE_N_24G) /* add N rate here */ {
struct ht_capability_ele *ht_cap = NULL;
bool is40M = false, isShortGI = false;
u8 max_mcs = 0;
diff --git a/drivers/staging/rtl8192u/ieee80211/rtl819x_HT.h b/drivers/staging/rtl8192u/ieee80211/rtl819x_HT.h
index b7769bca9740..3fca0d3a1d05 100644
--- a/drivers/staging/rtl8192u/ieee80211/rtl819x_HT.h
+++ b/drivers/staging/rtl8192u/ieee80211/rtl819x_HT.h
@@ -273,8 +273,7 @@ typedef enum _HT_AGGRE_SIZE {
}HT_AGGRE_SIZE_E, *PHT_AGGRE_SIZE_E;
/* Indicate different AP vendor for IOT issue */
-typedef enum _HT_IOT_PEER
-{
+typedef enum _HT_IOT_PEER {
HT_IOT_PEER_UNKNOWN = 0,
HT_IOT_PEER_REALTEK = 1,
HT_IOT_PEER_BROADCOM = 2,
--
2.22.0
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
