Add spaces around '|' to improve readability and follow kernel
coding style. Reported by checkpatch.
Signed-off-by: Michael Straube <straube.linux@xxxxxxxxx>
---
drivers/staging/rtl8188eu/hal/usb_halinit.c | 17 +++++++++--------
1 file changed, 9 insertions(+), 8 deletions(-)
diff --git a/drivers/staging/rtl8188eu/hal/usb_halinit.c b/drivers/staging/rtl8188eu/hal/usb_halinit.c
index fe68af7eaf85..9fa34c5c11c4 100644
--- a/drivers/staging/rtl8188eu/hal/usb_halinit.c
+++ b/drivers/staging/rtl8188eu/hal/usb_halinit.c
@@ -925,7 +925,7 @@ static void CardDisableRTL8188EU(struct adapter *Adapter)
val8 = usb_read8(Adapter, REG_GPIO_IO_SEL);
usb_write8(Adapter, REG_GPIO_IO_SEL, (val8<<4));
val8 = usb_read8(Adapter, REG_GPIO_IO_SEL + 1);
- usb_write8(Adapter, REG_GPIO_IO_SEL + 1, val8|0x0F);/* Reg0x43 */
+ usb_write8(Adapter, REG_GPIO_IO_SEL + 1, val8 | 0x0F);/* Reg0x43 */
usb_write32(Adapter, REG_BB_PAD_CTRL, 0x00080808);/* set LNA ,TRSW,EX_PA Pin to output mode */
Adapter->HalData->bMacPwrCtrlOn = false;
Adapter->bFWReady = false;
@@ -1176,7 +1176,7 @@ static void hw_var_set_opmode(struct adapter *Adapter, u8 variable, u8 *val)
/* enable BCN0 Function for if1 */
/* don't enable update TSF0 for if1 (due to TSF update when beacon/probe rsp are received) */
- usb_write8(Adapter, REG_BCN_CTRL, (DIS_TSF_UDT0_NORMAL_CHIP|EN_BCN_FUNCTION | BIT(1)));
+ usb_write8(Adapter, REG_BCN_CTRL, (DIS_TSF_UDT0_NORMAL_CHIP | EN_BCN_FUNCTION | BIT(1)));
/* dis BCN1 ATIM WND if if2 is station */
usb_write8(Adapter, REG_BCN_CTRL_1, usb_read8(Adapter, REG_BCN_CTRL_1) | BIT(0));
@@ -1318,7 +1318,7 @@ void rtw_hal_set_hwreg(struct adapter *Adapter, u8 variable, u8 *val)
break;
case HW_VAR_CHECK_BSSID:
if (*((u8 *)val)) {
- usb_write32(Adapter, REG_RCR, usb_read32(Adapter, REG_RCR)|RCR_CBSSID_DATA|RCR_CBSSID_BCN);
+ usb_write32(Adapter, REG_RCR, usb_read32(Adapter, REG_RCR) | RCR_CBSSID_DATA | RCR_CBSSID_BCN);
} else {
u32 val32;
@@ -1369,7 +1369,7 @@ void rtw_hal_set_hwreg(struct adapter *Adapter, u8 variable, u8 *val)
usb_write8(Adapter, REG_BCN_CTRL, usb_read8(Adapter, REG_BCN_CTRL) & (~BIT(4)));
}
- usb_write32(Adapter, REG_RCR, usb_read32(Adapter, REG_RCR)|RCR_CBSSID_BCN);
+ usb_write32(Adapter, REG_RCR, usb_read32(Adapter, REG_RCR) | RCR_CBSSID_BCN);
}
break;
case HW_VAR_MLME_JOIN:
@@ -1382,7 +1382,7 @@ void rtw_hal_set_hwreg(struct adapter *Adapter, u8 variable, u8 *val)
/* enable to rx data frame.Accept all data frame */
usb_write16(Adapter, REG_RXFLTMAP2, 0xFFFF);
- usb_write32(Adapter, REG_RCR, usb_read32(Adapter, REG_RCR)|RCR_CBSSID_DATA|RCR_CBSSID_BCN);
+ usb_write32(Adapter, REG_RCR, usb_read32(Adapter, REG_RCR) | RCR_CBSSID_DATA | RCR_CBSSID_BCN);
if (check_fwstate(pmlmepriv, WIFI_STATION_STATE))
RetryLimit = (haldata->CustomerID == RT_CID_CCX) ? 7 : 48;
@@ -1396,7 +1396,7 @@ void rtw_hal_set_hwreg(struct adapter *Adapter, u8 variable, u8 *val)
/* enable update TSF */
usb_write8(Adapter, REG_BCN_CTRL, usb_read8(Adapter, REG_BCN_CTRL) & (~BIT(4)));
- if (check_fwstate(pmlmepriv, WIFI_ADHOC_STATE|WIFI_ADHOC_MASTER_STATE))
+ if (check_fwstate(pmlmepriv, WIFI_ADHOC_STATE | WIFI_ADHOC_MASTER_STATE))
RetryLimit = 0x7;
}
usb_write16(Adapter, REG_RL, RetryLimit << RETRY_LIMIT_SHORT_SHIFT | RetryLimit << RETRY_LIMIT_LONG_SHIFT);
@@ -1485,7 +1485,8 @@ void rtw_hal_set_hwreg(struct adapter *Adapter, u8 variable, u8 *val)
ulContent = 0;
/* polling bit, and No Write enable, and address */
ulCommand = CAM_CONTENT_COUNT*ucIndex + i;
- ulCommand = ulCommand | CAM_POLLINIG|CAM_WRITE;
+ ulCommand = ulCommand | CAM_POLLINIG |
+ CAM_WRITE;
/* write content 0 is equall to mark invalid */
usb_write32(Adapter, WCAMI, ulContent); /* delay_ms(40); */
usb_write32(Adapter, RWCAM, ulCommand); /* delay_ms(40); */
@@ -1681,7 +1682,7 @@ void rtw_hal_set_hwreg(struct adapter *Adapter, u8 variable, u8 *val)
if (!pwrpriv->bkeepfwalive) {
/* RX DMA stop */
- usb_write32(Adapter, REG_RXPKT_NUM, (usb_read32(Adapter, REG_RXPKT_NUM)|RW_RELEASE_EN));
+ usb_write32(Adapter, REG_RXPKT_NUM, (usb_read32(Adapter, REG_RXPKT_NUM) | RW_RELEASE_EN));
do {
if (!(usb_read32(Adapter, REG_RXPKT_NUM) & RXDMA_IDLE))
break;
--
2.22.0
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
