Add spaces around '<<' and '>>' to improve readability and follow
kernel coding style. Reported by checkpatch.
Signed-off-by: Michael Straube <straube.linux@xxxxxxxxx>
---
drivers/staging/rtl8188eu/hal/usb_halinit.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/staging/rtl8188eu/hal/usb_halinit.c b/drivers/staging/rtl8188eu/hal/usb_halinit.c
index 9fa34c5c11c4..40162f111195 100644
--- a/drivers/staging/rtl8188eu/hal/usb_halinit.c
+++ b/drivers/staging/rtl8188eu/hal/usb_halinit.c
@@ -923,7 +923,7 @@ static void CardDisableRTL8188EU(struct adapter *Adapter)
usb_write8(Adapter, GPIO_IO_SEL, 0xFF);/* Reg0x46 */
val8 = usb_read8(Adapter, REG_GPIO_IO_SEL);
- usb_write8(Adapter, REG_GPIO_IO_SEL, (val8<<4));
+ usb_write8(Adapter, REG_GPIO_IO_SEL, (val8 << 4));
val8 = usb_read8(Adapter, REG_GPIO_IO_SEL + 1);
usb_write8(Adapter, REG_GPIO_IO_SEL + 1, val8 | 0x0F);/* Reg0x43 */
usb_write32(Adapter, REG_BB_PAD_CTRL, 0x00080808);/* set LNA ,TRSW,EX_PA Pin to output mode */
@@ -1307,7 +1307,7 @@ void rtw_hal_set_hwreg(struct adapter *Adapter, u8 variable, u8 *val)
usb_write8(Adapter, REG_BCN_CTRL, usb_read8(Adapter, REG_BCN_CTRL) & (~BIT(3)));
usb_write32(Adapter, REG_TSFTR, tsf);
- usb_write32(Adapter, REG_TSFTR + 4, tsf>>32);
+ usb_write32(Adapter, REG_TSFTR + 4, tsf >> 32);
/* enable related TSF function */
usb_write8(Adapter, REG_BCN_CTRL, usb_read8(Adapter, REG_BCN_CTRL) | BIT(3));
@@ -1442,7 +1442,7 @@ void rtw_hal_set_hwreg(struct adapter *Adapter, u8 variable, u8 *val)
u8 regTmp;
u8 bShortPreamble = *((bool *)val);
/* Joseph marked out for Netgear 3500 TKIP channel 7 issue.(Temporarily) */
- regTmp = (haldata->nCur40MhzPrimeSC)<<5;
+ regTmp = (haldata->nCur40MhzPrimeSC) << 5;
if (bShortPreamble)
regTmp |= 0x80;
@@ -1480,7 +1480,7 @@ void rtw_hal_set_hwreg(struct adapter *Adapter, u8 variable, u8 *val)
for (i = 0; i < CAM_CONTENT_COUNT; i++) {
/* filled id in CAM config 2 byte */
if (i == 0)
- ulContent |= (ucIndex & 0x03) | ((u16)(ulEncAlgo)<<2);
+ ulContent |= (ucIndex & 0x03) | ((u16)(ulEncAlgo) << 2);
else
ulContent = 0;
/* polling bit, and No Write enable, and address */
@@ -1590,8 +1590,8 @@ void rtw_hal_set_hwreg(struct adapter *Adapter, u8 variable, u8 *val)
FactorToSet = 0xf;
for (index = 0; index < 4; index++) {
- if ((pRegToSet[index] & 0xf0) > (FactorToSet<<4))
- pRegToSet[index] = (pRegToSet[index] & 0x0f) | (FactorToSet<<4);
+ if ((pRegToSet[index] & 0xf0) > (FactorToSet << 4))
+ pRegToSet[index] = (pRegToSet[index] & 0x0f) | (FactorToSet << 4);
if ((pRegToSet[index] & 0x0f) > FactorToSet)
pRegToSet[index] = (pRegToSet[index] & 0xf0) | (FactorToSet);
--
2.22.0
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
