This function isn't called anywhere. just drop it.
Signed-off-by: Chuanhong Guo <gch981213@xxxxxxxxx>
---
Change since v1:
New patch. Split from:
"MIPS: ralink: fix cpu clock of mt7621 and add dt clk devices"
arch/mips/ralink/mt7621.c | 43 ---------------------------------------
1 file changed, 43 deletions(-)
diff --git a/arch/mips/ralink/mt7621.c b/arch/mips/ralink/mt7621.c
index 9415be0d57b8..ba39f3f3a7c7 100644
--- a/arch/mips/ralink/mt7621.c
+++ b/arch/mips/ralink/mt7621.c
@@ -18,11 +18,6 @@
#include "common.h"
-#define SYSC_REG_SYSCFG 0x10
-#define SYSC_REG_CPLL_CLKCFG0 0x2c
-#define SYSC_REG_CUR_CLK_STS 0x44
-#define CPU_CLK_SEL (BIT(30) | BIT(31))
-
#define MT7621_GPIO_MODE_UART1 1
#define MT7621_GPIO_MODE_I2C 2
#define MT7621_GPIO_MODE_UART3_MASK 0x3
@@ -113,44 +108,6 @@ phys_addr_t mips_cpc_default_phys_base(void)
panic("Cannot detect cpc address");
}
-void __init ralink_clk_init(void)
-{
- int cpu_fdiv = 0;
- int cpu_ffrac = 0;
- int fbdiv = 0;
- u32 clk_sts, syscfg;
- u8 clk_sel = 0, xtal_mode;
- u32 cpu_clk;
-
- if ((rt_sysc_r32(SYSC_REG_CPLL_CLKCFG0) & CPU_CLK_SEL) != 0)
- clk_sel = 1;
-
- switch (clk_sel) {
- case 0:
- clk_sts = rt_sysc_r32(SYSC_REG_CUR_CLK_STS);
- cpu_fdiv = ((clk_sts >> 8) & 0x1F);
- cpu_ffrac = (clk_sts & 0x1F);
- cpu_clk = (500 * cpu_ffrac / cpu_fdiv) * 1000 * 1000;
- break;
-
- case 1:
- fbdiv = ((rt_sysc_r32(0x648) >> 4) & 0x7F) + 1;
- syscfg = rt_sysc_r32(SYSC_REG_SYSCFG);
- xtal_mode = (syscfg >> 6) & 0x7;
- if (xtal_mode >= 6) {
- /* 25Mhz Xtal */
- cpu_clk = 25 * fbdiv * 1000 * 1000;
- } else if (xtal_mode >= 3) {
- /* 40Mhz Xtal */
- cpu_clk = 40 * fbdiv * 1000 * 1000;
- } else {
- /* 20Mhz Xtal */
- cpu_clk = 20 * fbdiv * 1000 * 1000;
- }
- break;
- }
-}
-
void __init ralink_of_remap(void)
{
rt_sysc_membase = plat_of_remap_node("mtk,mt7621-sysc");
--
2.21.0
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
