[PATCH 1/8] staging: kpc2000: add line breaks

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



To fix some checkpatch-warnings some lines of this module had to be
shortened so that they do not exceed 80 characters per line.
This refactoring makes the code more readable.

Signed-off-by: Fabian Krueger <fabian.krueger@xxxxxx>
Signed-off-by: Michael Scheiderer <michael.scheiderer@xxxxxx>
Cc: <linux-kernel@xxxxxxxxxxxx>
---
 drivers/staging/kpc2000/kpc2000_spi.c | 77 ++++++++++++++++++++-------
 1 file changed, 58 insertions(+), 19 deletions(-)

diff --git a/drivers/staging/kpc2000/kpc2000_spi.c b/drivers/staging/kpc2000/kpc2000_spi.c
index c3e5c1848f53..7ed0fb6b4abb 100644
--- a/drivers/staging/kpc2000/kpc2000_spi.c
+++ b/drivers/staging/kpc2000/kpc2000_spi.c
@@ -30,18 +30,46 @@
 #include "kpc.h"
 
 static struct mtd_partition p2kr0_spi0_parts[] = {
-	{ .name = "SLOT_0",	.size = 7798784,		.offset = 0,                },
-	{ .name = "SLOT_1",	.size = 7798784,		.offset = MTDPART_OFS_NXTBLK},
-	{ .name = "SLOT_2",	.size = 7798784,		.offset = MTDPART_OFS_NXTBLK},
-	{ .name = "SLOT_3",	.size = 7798784,		.offset = MTDPART_OFS_NXTBLK},
-	{ .name = "CS0_EXTRA",	.size = MTDPART_SIZ_FULL,	.offset = MTDPART_OFS_NXTBLK},
+	{.name = "SLOT_0",
+	 .size = 7798784,
+	 .offset = 0,},
+
+	{.name = "SLOT_1",
+	 .size = 7798784,
+	 .offset = MTDPART_OFS_NXTBLK},
+
+	{.name = "SLOT_2",
+	 .size = 7798784,
+	 .offset = MTDPART_OFS_NXTBLK},
+
+	{.name = "SLOT_3",
+	 .size = 7798784,
+	 .offset = MTDPART_OFS_NXTBLK},
+
+	{.name = "CS0_EXTRA",
+	 .size = MTDPART_SIZ_FULL,
+	 .offset = MTDPART_OFS_NXTBLK},
 };
 static struct mtd_partition p2kr0_spi1_parts[] = {
-	{ .name = "SLOT_4",	.size = 7798784,		.offset = 0,                },
-	{ .name = "SLOT_5",	.size = 7798784,		.offset = MTDPART_OFS_NXTBLK},
-	{ .name = "SLOT_6",	.size = 7798784,		.offset = MTDPART_OFS_NXTBLK},
-	{ .name = "SLOT_7",	.size = 7798784,		.offset = MTDPART_OFS_NXTBLK},
-	{ .name = "CS1_EXTRA",	.size = MTDPART_SIZ_FULL,	.offset = MTDPART_OFS_NXTBLK},
+	{.name = "SLOT_4",
+	 .size = 7798784,
+	 .offset = 0,},
+
+	{.name = "SLOT_5",
+	 .size = 7798784,
+	 .offset = MTDPART_OFS_NXTBLK},
+
+	{.name = "SLOT_6",
+	 .size = 7798784,
+	 .offset = MTDPART_OFS_NXTBLK},
+
+	{.name = "SLOT_7",
+	 .size = 7798784,
+	 .offset = MTDPART_OFS_NXTBLK},
+
+	{.name = "CS1_EXTRA",
+	 .size = MTDPART_SIZ_FULL,
+	 .offset = MTDPART_OFS_NXTBLK},
 };
 
 static struct flash_platform_data p2kr0_spi0_pdata = {
@@ -182,7 +210,8 @@ kp_spi_write_reg(struct kp_spi_controller_state *cs, int idx, u64 val)
 }
 
 	static int
-kp_spi_wait_for_reg_bit(struct kp_spi_controller_state *cs, int idx, unsigned long bit)
+kp_spi_wait_for_reg_bit(struct kp_spi_controller_state *cs, int idx,
+			unsigned long bit)
 {
 	unsigned long timeout;
 	timeout = jiffies + msecs_to_jiffies(1000);
@@ -215,7 +244,9 @@ kp_spi_txrx_pio(struct spi_device *spidev, struct spi_transfer *transfer)
 		for (i = 0 ; i < c ; i++) {
 			char val = *tx++;
 
-			if (kp_spi_wait_for_reg_bit(cs, KP_SPI_REG_STATUS, KP_SPI_REG_STATUS_TXS) < 0) {
+			if (kp_spi_wait_for_reg_bit(cs, KP_SPI_REG_STATUS,
+						    KP_SPI_REG_STATUS_TXS)
+			    < 0) {
 				goto out;
 			}
 
@@ -229,7 +260,9 @@ kp_spi_txrx_pio(struct spi_device *spidev, struct spi_transfer *transfer)
 
 			kp_spi_write_reg(cs, KP_SPI_REG_TXDATA, 0x00);
 
-			if (kp_spi_wait_for_reg_bit(cs, KP_SPI_REG_STATUS, KP_SPI_REG_STATUS_RXS) < 0) {
+			if (kp_spi_wait_for_reg_bit(cs, KP_SPI_REG_STATUS,
+						    KP_SPI_REG_STATUS_RXS)
+			    < 0) {
 				goto out;
 			}
 
@@ -239,8 +272,10 @@ kp_spi_txrx_pio(struct spi_device *spidev, struct spi_transfer *transfer)
 		}
 	}
 
-	if (kp_spi_wait_for_reg_bit(cs, KP_SPI_REG_STATUS, KP_SPI_REG_STATUS_EOT) < 0) {
-		//TODO: Figure out how to abort transaction??  This has never happened in practice though...
+	if (kp_spi_wait_for_reg_bit(cs, KP_SPI_REG_STATUS,
+				    KP_SPI_REG_STATUS_EOT) < 0) {
+		//TODO: Figure out how to abort transaction??
+		//Ths has never happened in practice though...
 	}
 
 out:
@@ -307,7 +342,8 @@ kp_spi_transfer_one_message(struct spi_master *master, struct spi_message *m)
 		void       *rx_buf = transfer->rx_buf;
 		unsigned    len = transfer->len;
 
-		if (transfer->speed_hz > KP_SPI_CLK || (len && !(rx_buf || tx_buf))) {
+		if (transfer->speed_hz > KP_SPI_CLK ||
+		    (len && !(rx_buf || tx_buf))) {
 			dev_dbg(kpspi->dev, "  transfer: %d Hz, %d %s%s, %d bpw\n",
 					transfer->speed_hz,
 					len,
@@ -317,7 +353,8 @@ kp_spi_transfer_one_message(struct spi_master *master, struct spi_message *m)
 			dev_dbg(kpspi->dev, "  transfer -EINVAL\n");
 			return -EINVAL;
 		}
-		if (transfer->speed_hz && (transfer->speed_hz < (KP_SPI_CLK >> 15))) {
+		if (transfer->speed_hz && (transfer->speed_hz <
+					   (KP_SPI_CLK >> 15))) {
 			dev_dbg(kpspi->dev, "speed_hz %d below minimum %d Hz\n",
 					transfer->speed_hz,
 					KP_SPI_CLK >> 15);
@@ -332,14 +369,16 @@ kp_spi_transfer_one_message(struct spi_master *master, struct spi_message *m)
 	kp_spi_write_reg(cs, KP_SPI_REG_CONFIG, sc.reg);
 
 	/* work */
-	if (kp_spi_wait_for_reg_bit(cs, KP_SPI_REG_STATUS, KP_SPI_REG_STATUS_EOT) < 0) {
+	if (kp_spi_wait_for_reg_bit(cs, KP_SPI_REG_STATUS,
+				    KP_SPI_REG_STATUS_EOT) < 0) {
 		dev_info(kpspi->dev, "EOT timed out\n");
 		goto out;
 	}
 
 	/* do the transfers for this message */
 	list_for_each_entry(transfer, &m->transfers, transfer_list) {
-		if (transfer->tx_buf == NULL && transfer->rx_buf == NULL && transfer->len) {
+		if (!transfer->tx_buf && !transfer->rx_buf &&
+		    transfer->len) {
 			status = -EINVAL;
 			goto error;
 		}
-- 
2.17.1

_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel



[Index of Archives]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux