Re: [PATCH V3 10/15] scsi: aha152x: use sg helper to operate scatterlist

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Jun 14, 2019 at 03:27:36PM +1000, Finn Thain wrote:
> Hi Ming,
> 
> On Fri, 14 Jun 2019, Ming Lei wrote:
> 
> > Use the scatterlist iterators and remove direct indexing of the
> > scatterlist array.
> > 
> > This way allows us to pre-allocate one small scatterlist, which can be
> > chained with one runtime allocated scatterlist if the pre-allocated one
> > isn't enough for the whole request.
> > 
> > Signed-off-by: Ming Lei <ming.lei@xxxxxxxxxx>
> > ---
> >  drivers/scsi/aha152x.c | 29 +++++++++++++++++++----------
> >  1 file changed, 19 insertions(+), 10 deletions(-)
> > 
> > diff --git a/drivers/scsi/aha152x.c b/drivers/scsi/aha152x.c
> > index 97872838b983..bc9d12aa7880 100644
> > --- a/drivers/scsi/aha152x.c
> > +++ b/drivers/scsi/aha152x.c
> > @@ -2033,7 +2033,7 @@ static void datai_run(struct Scsi_Host *shpnt)
> >  				    CURRENT_SC->SCp.buffers_residual > 0) {
> >  					/* advance to next buffer */
> >  					CURRENT_SC->SCp.buffers_residual--;
> > -					CURRENT_SC->SCp.buffer++;
> > +					CURRENT_SC->SCp.buffer = sg_next(CURRENT_SC->SCp.buffer);
> >  					CURRENT_SC->SCp.ptr           = SG_ADDRESS(CURRENT_SC->SCp.buffer);
> >  					CURRENT_SC->SCp.this_residual = CURRENT_SC->SCp.buffer->length;
> >  				}
> > @@ -2139,7 +2139,7 @@ static void datao_run(struct Scsi_Host *shpnt)
> >  		if(CURRENT_SC->SCp.this_residual==0 && CURRENT_SC->SCp.buffers_residual>0) {
> >  			/* advance to next buffer */
> >  			CURRENT_SC->SCp.buffers_residual--;
> > -			CURRENT_SC->SCp.buffer++;
> > +			CURRENT_SC->SCp.buffer = sg_next(CURRENT_SC->SCp.buffer);
> >  			CURRENT_SC->SCp.ptr           = SG_ADDRESS(CURRENT_SC->SCp.buffer);
> >  			CURRENT_SC->SCp.this_residual = CURRENT_SC->SCp.buffer->length;
> >  		}
> > @@ -2160,20 +2160,29 @@ static void datao_end(struct Scsi_Host *shpnt)
> >  	if(TESTLO(DMASTAT, DFIFOEMP)) {
> >  		int data_count = (DATA_LEN - scsi_get_resid(CURRENT_SC)) -
> >  			GETSTCNT();
> 
> data_count appears to be the number of bytes remaining in the FIFO. (I 
> have to infer that much from the surrounding code. I don't have 
> documentation for this controller.)

Yeah, it should be so, that is the data which need to transfer again.

> 
> Some comments would be nice.
> 
> > +		struct scatterlist *sg = scsi_sglist(CURRENT_SC);
> > +		int left, i = 0;
> >  
> >  		CMD_INC_RESID(CURRENT_SC, data_count);
> >  
> 
> Apparently the aim is to increase the residual by the number of bytes that 
> will never leave the FIFO. Above we can see that increase performed by 
> scsi_set_resid() and now the same has to be done to the SCp struct.

Agree.

> 
> >  		data_count -= CURRENT_SC->SCp.ptr -
> >  			SG_ADDRESS(CURRENT_SC->SCp.buffer);
> 
> Here, data_count effectively has SCp.this_residual subtracted from it.
> 
> > -		while(data_count>0) {
> > -			CURRENT_SC->SCp.buffer--;
> > -			CURRENT_SC->SCp.buffers_residual++;
> > -			data_count -= CURRENT_SC->SCp.buffer->length;
> > -		}
> 
> So far, so good.
> 
> > -		CURRENT_SC->SCp.ptr = SG_ADDRESS(CURRENT_SC->SCp.buffer) -
> > -			data_count;
> > -		CURRENT_SC->SCp.this_residual = CURRENT_SC->SCp.buffer->length +
> > -			data_count;
> 
> This is like saying ptr = buffer + residual, which is bogus. This must be 
> an old bug, but we never hit it because the FIFO is always empty when we 
> get a DISCONNECT message. Probably because every SG segment has a length 
> that is a multiple of 128 bytes. (Juergen?)
> 
> > +
> > +		left = CURRENT_SC->transfersize - data_count;
> 
> Are you sure about that? Perhaps you meant to write,
> 		left = scsi_bufflen(CURRENT_SC) - scsi_get_resid(CURRENT_SC);
> 
> Is there a better name for this variable? Maybe 'sent' or 'bytes_sent'?

'left' can be renamed as 'done', and

	done =  GETSTCNT - (CURRENT_SC->SCp.ptr - SG_ADDRESS(CURRENT_SC->SCp.buffer))

> 
> > +		for (i = 0; left > 0 && !sg_is_last(sg); i++, sg = sg_next(sg)) {
> > +			if (left < sg->length)
> > +				break;
> > +			left -= sg->length;
> > +		}
> > +
> > +		if (data_count > 0) {
> > +			CURRENT_SC->SCp.buffers_residual += i;
> 
> Shouldn't that be,
> 			CURRENT_SC->SCp.buffers_residual = i;

Good catch.

> 
> > +			CURRENT_SC->SCp.buffer = sg;
> > +
> > +			CURRENT_SC->SCp.ptr = SG_ADDRESS(CURRENT_SC->SCp.buffer) + left;
> > +			CURRENT_SC->SCp.this_residual = CURRENT_SC->SCp.buffer->length -
> > +				left;
> > +		}
> >  	}
> >  
> >  	SETPORT(SXFRCTL0, CH1|CLRCH1|CLRSTCNT);
> > 
> 
> BTW, datao_run() seems to guarantee that the FIFO will never contain more 
> than min(128, SCp.this_residual) so I suspect that this code can be 
> simplified. That's just BTW. I wouldn't attempt to optimize this branch as 
> it will only run when the FIFO is not empty, if ever. So I'd prefer 
> clarity. Besides, I don't have the hardware to test it on.

I'd suggest to simply translate into code which uses current sg helper.

Follows the fixed version, could you review again?

>From f03484d4bac083c39d70665cfbadb641093b63de Mon Sep 17 00:00:00 2001
From: Ming Lei <ming.lei@xxxxxxxxxx>
Date: Wed, 12 Jun 2019 20:37:35 +0800
Subject: [PATCH] scsi: aha152x: use sg helper to operate scatterlist

Use the scatterlist iterators and remove direct indexing of the
scatterlist array.

This way allows us to pre-allocate one small scatterlist, which can be
chained with one runtime allocated scatterlist if the pre-allocated one
isn't enough for the whole request.

Signed-off-by: Ming Lei <ming.lei@xxxxxxxxxx>
---
 drivers/scsi/aha152x.c | 34 ++++++++++++++++++++--------------
 1 file changed, 20 insertions(+), 14 deletions(-)

diff --git a/drivers/scsi/aha152x.c b/drivers/scsi/aha152x.c
index 97872838b983..7faecdefda56 100644
--- a/drivers/scsi/aha152x.c
+++ b/drivers/scsi/aha152x.c
@@ -2033,7 +2033,7 @@ static void datai_run(struct Scsi_Host *shpnt)
 				    CURRENT_SC->SCp.buffers_residual > 0) {
 					/* advance to next buffer */
 					CURRENT_SC->SCp.buffers_residual--;
-					CURRENT_SC->SCp.buffer++;
+					CURRENT_SC->SCp.buffer = sg_next(CURRENT_SC->SCp.buffer);
 					CURRENT_SC->SCp.ptr           = SG_ADDRESS(CURRENT_SC->SCp.buffer);
 					CURRENT_SC->SCp.this_residual = CURRENT_SC->SCp.buffer->length;
 				}
@@ -2139,7 +2139,7 @@ static void datao_run(struct Scsi_Host *shpnt)
 		if(CURRENT_SC->SCp.this_residual==0 && CURRENT_SC->SCp.buffers_residual>0) {
 			/* advance to next buffer */
 			CURRENT_SC->SCp.buffers_residual--;
-			CURRENT_SC->SCp.buffer++;
+			CURRENT_SC->SCp.buffer = sg_next(CURRENT_SC->SCp.buffer);
 			CURRENT_SC->SCp.ptr           = SG_ADDRESS(CURRENT_SC->SCp.buffer);
 			CURRENT_SC->SCp.this_residual = CURRENT_SC->SCp.buffer->length;
 		}
@@ -2158,22 +2158,28 @@ static void datao_run(struct Scsi_Host *shpnt)
 static void datao_end(struct Scsi_Host *shpnt)
 {
 	if(TESTLO(DMASTAT, DFIFOEMP)) {
-		int data_count = (DATA_LEN - scsi_get_resid(CURRENT_SC)) -
-			GETSTCNT();
+		int done = GETSTCNT();
+		int data_count = (DATA_LEN - scsi_get_resid(CURRENT_SC)) - done;
+		struct scatterlist *sg = scsi_sglist(CURRENT_SC);
+		int i;
 
 		CMD_INC_RESID(CURRENT_SC, data_count);
 
-		data_count -= CURRENT_SC->SCp.ptr -
-			SG_ADDRESS(CURRENT_SC->SCp.buffer);
-		while(data_count>0) {
-			CURRENT_SC->SCp.buffer--;
-			CURRENT_SC->SCp.buffers_residual++;
-			data_count -= CURRENT_SC->SCp.buffer->length;
+		/*
+		 * rewind where we have done, and we have to start from
+		 * the beginning
+		 */
+		for (i = 0; done > 0 && !sg_is_last(sg); i++, sg = sg_next(sg)) {
+			if (done < sg->length)
+				break;
+			done -= sg->length;
 		}
-		CURRENT_SC->SCp.ptr = SG_ADDRESS(CURRENT_SC->SCp.buffer) -
-			data_count;
-		CURRENT_SC->SCp.this_residual = CURRENT_SC->SCp.buffer->length +
-			data_count;
+
+		CURRENT_SC->SCp.buffers_residual = i;
+		CURRENT_SC->SCp.buffer = sg;
+		CURRENT_SC->SCp.ptr = SG_ADDRESS(CURRENT_SC->SCp.buffer) + done;
+		CURRENT_SC->SCp.this_residual = CURRENT_SC->SCp.buffer->length -
+			done;
 	}
 
 	SETPORT(SXFRCTL0, CH1|CLRCH1|CLRSTCNT);
-- 
2.20.1


thanks,
Ming
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel



[Index of Archives]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux