From: Andres Salomon <dilinger@xxxxxxxxxx>
This adds CONFIG_FB_OLPC_DCON_1 and CONFIG_FB_OLPC_DCON_1_5 options for
allowing selection of XO-1 and/or XO-1.5 DCON support. In the process,
it also forces the xo_1.c and xo_1_5.c files to build as separate units,
correctly selects between XO-1 and XO-1.5 at runtime, and adds some
hacks to allow xo_1_5.c to build.
This isn't the cleanest patch, but it'll get better as more global
variables are dropped.
Signed-off-by: Andres Salomon <dilinger@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxx>
---
drivers/staging/olpc_dcon/Kconfig | 20 +++++++++++++++
drivers/staging/olpc_dcon/Makefile | 7 ++++-
drivers/staging/olpc_dcon/olpc_dcon.c | 34 +++++++++++++-------------
drivers/staging/olpc_dcon/olpc_dcon.h | 22 ++++++++++++++++
drivers/staging/olpc_dcon/olpc_dcon_xo_1.c | 2 +-
drivers/staging/olpc_dcon/olpc_dcon_xo_1_5.c | 18 +++++++++++--
6 files changed, 81 insertions(+), 22 deletions(-)
diff --git a/drivers/staging/olpc_dcon/Kconfig b/drivers/staging/olpc_dcon/Kconfig
index 8be8716..982273c 100644
--- a/drivers/staging/olpc_dcon/Kconfig
+++ b/drivers/staging/olpc_dcon/Kconfig
@@ -6,3 +6,23 @@ config FB_OLPC_DCON
Add support for the OLPC XO DCON controller. This controller is
only available on OLPC platforms. Unless you have one of these
platforms, you will want to say 'N'.
+
+config FB_OLPC_DCON_1
+ bool "OLPC XO-1 DCON support"
+ depends on FB_OLPC_DCON
+ default y
+ ---help---
+ Enable support for the DCON in XO-1 model laptops. The kernel
+ communicates with the DCON using model-specific code. If you
+ have an XO-1 (or if you're unsure what model you have), you should
+ say 'Y'.
+
+config FB_OLPC_DCON_1_5
+ bool "OLPC XO-1.5 DCON support"
+ depends on FB_OLPC_DCON
+ default y
+ ---help---
+ Enable support for the DCON in XO-1.5 model laptops. The kernel
+ communicates with the DCON using model-specific code. If you
+ have an XO-1.5 (or if you're unsure what model you have), you
+ should say 'Y'.
diff --git a/drivers/staging/olpc_dcon/Makefile b/drivers/staging/olpc_dcon/Makefile
index cd8f289..36c7e67 100644
--- a/drivers/staging/olpc_dcon/Makefile
+++ b/drivers/staging/olpc_dcon/Makefile
@@ -1 +1,6 @@
-obj-$(CONFIG_FB_OLPC_DCON) += olpc_dcon.o
+olpc-dcon-objs += olpc_dcon.o
+olpc-dcon-$(CONFIG_FB_OLPC_DCON_1) += olpc_dcon_xo_1.o
+olpc-dcon-$(CONFIG_FB_OLPC_DCON_1_5) += olpc_dcon_xo_1_5.o
+obj-$(CONFIG_FB_OLPC_DCON) += olpc-dcon.o
+
+
diff --git a/drivers/staging/olpc_dcon/olpc_dcon.c b/drivers/staging/olpc_dcon/olpc_dcon.c
index 52b7b30..96b6fd2 100644
--- a/drivers/staging/olpc_dcon/olpc_dcon.c
+++ b/drivers/staging/olpc_dcon/olpc_dcon.c
@@ -4,7 +4,7 @@
* Copyright  2006-2007 Red Hat, Inc.
* Copyright  2006-2007 Advanced Micro Devices, Inc.
* Copyright  2009 VIA Technology, Inc.
- * Copyright (c) 2010 Andres Salomon <dilinger@xxxxxxxxxx>
+ * Copyright (c) 2010-2011 Andres Salomon <dilinger@xxxxxxxxxx>
*
* This program is free software. You can redistribute it and/or
* modify it under the terms of version 2 of the GNU General Public
@@ -44,13 +44,6 @@ module_param(noinit, int, 0444);
static int useaa = 1;
module_param(useaa, int, 0444);
-struct dcon_platform_data {
- int (*init)(void);
- void (*bus_stabilize_wiggle)(void);
- void (*set_dconload)(int);
- u8 (*read_status)(void);
-};
-
static struct dcon_platform_data *pdata;
struct dcon_priv {
@@ -73,8 +66,6 @@ struct dcon_priv {
/* I2C structures */
-static struct i2c_driver dcon_driver;
-
/* Platform devices */
static struct platform_device *dcon_device;
@@ -82,10 +73,10 @@ static struct platform_device *dcon_device;
static struct backlight_device *dcon_bl_dev;
/* Current source, initialized at probe time */
-static int dcon_source;
+int dcon_source;
/* Desired source */
-static int dcon_pending;
+int dcon_pending;
/* Variables used during switches */
static int dcon_switched;
@@ -693,6 +684,9 @@ static int dcon_probe(struct i2c_client *client, const struct i2c_device_id *id)
struct dcon_priv *dcon;
int rc, i, j;
+ if (!pdata)
+ return -ENXIO;
+
dcon = kzalloc(sizeof(*dcon), GFP_KERNEL);
if (!dcon)
return -ENOMEM;
@@ -830,7 +824,7 @@ static int dcon_resume(struct i2c_client *client)
#endif
-static irqreturn_t dcon_interrupt(int irq, void *id)
+irqreturn_t dcon_interrupt(int irq, void *id)
{
int status = pdata->read_status();
@@ -877,7 +871,7 @@ static const struct i2c_device_id dcon_idtable[] = {
MODULE_DEVICE_TABLE(i2c, dcon_idtable);
-static struct i2c_driver dcon_driver = {
+struct i2c_driver dcon_driver = {
.driver = {
.name = "olpc_dcon",
},
@@ -893,11 +887,17 @@ static struct i2c_driver dcon_driver = {
#endif
};
-#include "olpc_dcon_xo_1.c"
-
static int __init olpc_dcon_init(void)
{
- pdata = &dcon_pdata_xo_1;
+#ifdef CONFIG_FB_OLPC_DCON_1_5
+ /* XO-1.5 */
+ if (olpc_board_at_least(olpc_board(0xd0)))
+ pdata = &dcon_pdata_xo_1_5;
+#endif
+#ifdef CONFIG_FB_OLPC_DCON_1
+ if (!pdata)
+ pdata = &dcon_pdata_xo_1;
+#endif
return i2c_add_driver(&dcon_driver);
}
diff --git a/drivers/staging/olpc_dcon/olpc_dcon.h b/drivers/staging/olpc_dcon/olpc_dcon.h
index cef2473..03ac42c 100644
--- a/drivers/staging/olpc_dcon/olpc_dcon.h
+++ b/drivers/staging/olpc_dcon/olpc_dcon.h
@@ -44,4 +44,26 @@
/* Interrupt */
#define DCON_IRQ 6
+struct dcon_platform_data {
+ int (*init)(void);
+ void (*bus_stabilize_wiggle)(void);
+ void (*set_dconload)(int);
+ u8 (*read_status)(void);
+};
+
+#include <linux/interrupt.h>
+
+extern int dcon_source;
+extern int dcon_pending;
+extern irqreturn_t dcon_interrupt(int irq, void *id);
+extern struct i2c_driver dcon_driver;
+
+#ifdef CONFIG_FB_OLPC_DCON_1
+extern struct dcon_platform_data dcon_pdata_xo_1;
+#endif
+
+#ifdef CONFIG_FB_OLPC_DCON_1_5
+extern struct dcon_platform_data dcon_pdata_xo_1_5;
+#endif
+
#endif
diff --git a/drivers/staging/olpc_dcon/olpc_dcon_xo_1.c b/drivers/staging/olpc_dcon/olpc_dcon_xo_1.c
index 043198d..be52b6c 100644
--- a/drivers/staging/olpc_dcon/olpc_dcon_xo_1.c
+++ b/drivers/staging/olpc_dcon/olpc_dcon_xo_1.c
@@ -195,7 +195,7 @@ static u8 dcon_read_status_xo_1(void)
return status;
}
-static struct dcon_platform_data dcon_pdata_xo_1 = {
+struct dcon_platform_data dcon_pdata_xo_1 = {
.init = dcon_init_xo_1,
.bus_stabilize_wiggle = dcon_wiggle_xo_1,
.set_dconload = dcon_set_dconload_1,
diff --git a/drivers/staging/olpc_dcon/olpc_dcon_xo_1_5.c b/drivers/staging/olpc_dcon/olpc_dcon_xo_1_5.c
index 5ef0540..d4c2d74 100644
--- a/drivers/staging/olpc_dcon/olpc_dcon_xo_1_5.c
+++ b/drivers/staging/olpc_dcon/olpc_dcon_xo_1_5.c
@@ -7,6 +7,20 @@
*/
#include <linux/acpi.h>
+#include <linux/pci.h>
+#include <linux/gpio.h>
+#include <asm/olpc.h>
+
+/* TODO: this eventually belongs in linux/vx855.h */
+#define NR_VX855_GPI 14
+#define NR_VX855_GPO 13
+#define NR_VX855_GPIO 15
+
+#define VX855_GPI(n) (n)
+#define VX855_GPO(n) (NR_VX855_GPI + (n))
+#define VX855_GPIO(n) (NR_VX855_GPI + NR_VX855_GPO + (n))
+
+#include "olpc_dcon.h"
/* Hardware setup on the XO 1.5:
* DCONLOAD connects to
@@ -26,8 +40,6 @@
#define PREFIX "OLPC DCON:"
-static struct dcon_platform_data dcon_pdata_xo_1_5;
-
static void dcon_clear_irq(void)
{
/* irq status will appear in PMIO_Rx50[6] (RW1C) on gpio12 */
@@ -173,7 +185,7 @@ static u8 dcon_read_status_xo_1_5(void)
return status;
}
-static struct dcon_platform_data dcon_pdata_xo_1_5 = {
+struct dcon_platform_data dcon_pdata_xo_1_5 = {
.init = dcon_init_xo_1_5,
.bus_stabilize_wiggle = dcon_wiggle_xo_1_5,
.set_dconload = dcon_set_dconload_xo_1_5,
--
1.7.4.1
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
