From: Felix Trommer <felix.trommer@xxxxxxxxxx>
Replace C99-Style comments with C89-Style comments.
Signed-off-by: Felix Trommer <felix.trommer@xxxxxxxxxx>
Signed-off-by: Christian Müller <muellerch-privat@xxxxxx>
---
drivers/staging/rtl8192u/ieee80211/dot11d.c | 6 +-
.../staging/rtl8192u/ieee80211/ieee80211.h | 276 ++++++++---------
.../rtl8192u/ieee80211/ieee80211_crypt.c | 3 +-
.../rtl8192u/ieee80211/ieee80211_crypt.h | 15 +-
.../rtl8192u/ieee80211/ieee80211_crypt_ccmp.c | 6 +-
.../rtl8192u/ieee80211/ieee80211_crypt_tkip.c | 12 +-
.../rtl8192u/ieee80211/ieee80211_crypt_wep.c | 9 +-
.../rtl8192u/ieee80211/ieee80211_module.c | 3 +-
.../staging/rtl8192u/ieee80211/ieee80211_rx.c | 284 +++++++++++-------
.../rtl8192u/ieee80211/ieee80211_softmac.c | 197 ++++++------
.../rtl8192u/ieee80211/ieee80211_softmac_wx.c | 8 +-
.../staging/rtl8192u/ieee80211/ieee80211_tx.c | 124 ++++----
.../staging/rtl8192u/ieee80211/ieee80211_wx.c | 45 +--
.../staging/rtl8192u/ieee80211/rtl819x_BA.h | 2 +-
.../rtl8192u/ieee80211/rtl819x_BAProc.c | 148 ++++-----
.../staging/rtl8192u/ieee80211/rtl819x_HT.h | 94 +++---
.../rtl8192u/ieee80211/rtl819x_HTProc.c | 196 ++++++------
.../staging/rtl8192u/ieee80211/rtl819x_Qos.h | 20 +-
.../rtl8192u/ieee80211/rtl819x_TSProc.c | 85 +++---
drivers/staging/rtl8192u/r8180_93cx6.c | 3 +-
drivers/staging/rtl8192u/r8180_93cx6.h | 4 +-
drivers/staging/rtl8192u/r8190_rtl8256.c | 33 +-
drivers/staging/rtl8192u/r8192U.h | 47 +--
drivers/staging/rtl8192u/r8192U_core.c | 154 ++++++----
drivers/staging/rtl8192u/r8192U_dm.c | 131 ++++----
drivers/staging/rtl8192u/r8192U_dm.h | 22 +-
drivers/staging/rtl8192u/r8192U_hw.h | 176 +++++------
drivers/staging/rtl8192u/r8192U_wx.c | 12 +-
drivers/staging/rtl8192u/r819xU_cmdpkt.c | 77 +++--
drivers/staging/rtl8192u/r819xU_cmdpkt.h | 14 +-
drivers/staging/rtl8192u/r819xU_firmware.c | 9 +-
drivers/staging/rtl8192u/r819xU_phy.c | 30 +-
drivers/staging/rtl8192u/r819xU_phy.h | 4 +-
drivers/staging/rtl8192u/r819xU_phyreg.h | 9 +-
34 files changed, 1267 insertions(+), 991 deletions(-)
diff --git a/drivers/staging/rtl8192u/ieee80211/dot11d.c b/drivers/staging/rtl8192u/ieee80211/dot11d.c
index 130ddfe9868f..bbb1014007a4 100644
--- a/drivers/staging/rtl8192u/ieee80211/dot11d.c
+++ b/drivers/staging/rtl8192u/ieee80211/dot11d.c
@@ -63,14 +63,16 @@ void dot11d_update_country_ie(struct ieee80211_device *dev, u8 *pTaddr,
pTriple = (struct chnl_txpower_triple *)(pCoutryIe + 3);
for (i = 0; i < NumTriples; i++) {
if (MaxChnlNum >= pTriple->first_channel) {
- /* It is not in a monotonically increasing order, so
+ /*
+ * It is not in a monotonically increasing order, so
* stop processing.
*/
netdev_err(dev->dev, "dot11d_update_country_ie(): Invalid country IE, skip it........1\n");
return;
}
if (MAX_CHANNEL_NUMBER < (pTriple->first_channel + pTriple->num_channels)) {
- /* It is not a valid set of channel id, so stop
+ /*
+ * It is not a valid set of channel id, so stop
* processing.
*/
netdev_err(dev->dev, "dot11d_update_country_ie(): Invalid country IE, skip it........2\n");
diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211.h b/drivers/staging/rtl8192u/ieee80211/ieee80211.h
index d36963469015..8be8a94a2253 100644
--- a/drivers/staging/rtl8192u/ieee80211/ieee80211.h
+++ b/drivers/staging/rtl8192u/ieee80211/ieee80211.h
@@ -54,9 +54,7 @@
/* added for rtl819x tx procedure */
#define MAX_QUEUE_SIZE 0x10
-//
-// 8190 queue mapping
-//
+/* 8190 queue mapping */
#define BK_QUEUE 0
#define BE_QUEUE 1
#define VI_QUEUE 2
@@ -70,13 +68,13 @@
#define LOW_QUEUE BE_QUEUE
#define NORMAL_QUEUE MGNT_QUEUE
-//added by amy for ps
+/* added by amy for ps */
#define SWRF_TIMEOUT 50
-//added by amy for LEAP related
-#define IE_CISCO_FLAG_POSITION 0x08 // Flag byte: byte 8, numbered from 0.
-#define SUPPORT_CKIP_MIC 0x08 // bit3
-#define SUPPORT_CKIP_PK 0x10 // bit4
+/* added by amy for LEAP related */
+#define IE_CISCO_FLAG_POSITION 0x08 /* Flag byte: byte 8, numbered from 0. */
+#define SUPPORT_CKIP_MIC 0x08 /* bit3 */
+#define SUPPORT_CKIP_PK 0x10 /* bit4 */
/* defined for skb cb field */
/* At most 28 byte */
struct cb_desc {
@@ -88,7 +86,7 @@ struct cb_desc {
u8 bEncrypt:1;
u8 bTxDisableRateFallBack:1;
u8 bTxUseDriverAssingedRate:1;
- u8 bHwSec:1; //indicate whether use Hw security. WB
+ u8 bHwSec:1; /* indicate whether use Hw security. WB */
u8 reserved1;
@@ -108,17 +106,17 @@ struct cb_desc {
u8 bRTSUseShortGI:1;
u8 bMulticast:1;
u8 bBroadcast:1;
- //u8 reserved2:2;
+ /* u8 reserved2:2; */
u8 drv_agg_enable:1;
u8 reserved2:1;
/* Tx Desc related element(12-19) */
u8 rata_index;
u8 queue_index;
- //u8 reserved3;
- //u8 reserved4;
+ /* u8 reserved3; */
+ /* u8 reserved4; */
u16 txbuf_size;
- //u8 reserved5;
+ /* u8 reserved5; */
u8 RATRIndex;
u8 reserved6;
u8 reserved7;
@@ -129,9 +127,9 @@ struct cb_desc {
u8 rts_rate;
u8 ampdu_factor;
u8 ampdu_density;
- //u8 reserved9;
- //u8 reserved10;
- //u8 reserved11;
+ /* u8 reserved9; */
+ /* u8 reserved10; */
+ /* u8 reserved11; */
u8 DrvAggrNum;
u16 pkt_size;
u8 reserved12;
@@ -187,15 +185,21 @@ struct cb_desc {
#define IEEE_PARAM_PRIVACY_INVOKED 4
#define IEEE_PARAM_AUTH_ALGS 5
#define IEEE_PARAM_IEEE_802_1X 6
-//It should consistent with the driver_XXX.c
-// David, 2006.9.26
+/*
+ * It should consistent with the driver_XXX.c
+ * David, 2006.9.26
+ */
#define IEEE_PARAM_WPAX_SELECT 7
-//Added for notify the encryption type selection
-// David, 2006.9.26
+/*
+ * Added for notify the encryption type selection
+ * David, 2006.9.26
+ */
#define IEEE_PROTO_WPA 1
#define IEEE_PROTO_RSN 2
-//Added for notify the encryption type selection
-// David, 2006.9.26
+/*
+ * Added for notify the encryption type selection
+ * David, 2006.9.26
+ */
#define IEEE_WPAX_USEGROUP 0
#define IEEE_WPAX_WEP40 1
#define IEEE_WPAX_TKIP 2
@@ -222,7 +226,7 @@ struct cb_desc {
#define MAX_IE_LEN 0xff
-// added for kernel conflict
+/* added for kernel conflict */
#define ieee80211_crypt_deinit_entries ieee80211_crypt_deinit_entries_rsl
#define ieee80211_crypt_deinit_handler ieee80211_crypt_deinit_handler_rsl
#define ieee80211_crypt_delayed_deinit ieee80211_crypt_delayed_deinit_rsl
@@ -322,7 +326,7 @@ struct ieee_param {
};
-// linux under 2.6.9 release may not support it, so modify it for common use
+/* linux under 2.6.9 release may not support it, so modify it for common use */
#define IEEE80211_DATA_LEN 2304
/* Maximum size for the MA-UNITDATA primitive, 802.11 standard section
* 6.2.1.1.2.
@@ -354,7 +358,7 @@ struct ieee_param {
#define IEEE80211_FCTL_FRAMETYPE 0x00fc
#define IEEE80211_FCTL_TODS 0x0100
#define IEEE80211_FCTL_FROMDS 0x0200
-#define IEEE80211_FCTL_DSTODS 0x0300 //added by david
+#define IEEE80211_FCTL_DSTODS 0x0300 /* added by david */
#define IEEE80211_FCTL_MOREFRAGS 0x0400
#define IEEE80211_FCTL_RETRY 0x0800
#define IEEE80211_FCTL_PM 0x1000
@@ -398,7 +402,7 @@ struct ieee_param {
#define IEEE80211_STYPE_CFACK 0x0050
#define IEEE80211_STYPE_CFPOLL 0x0060
#define IEEE80211_STYPE_CFACKPOLL 0x0070
-#define IEEE80211_STYPE_QOS_DATA 0x0080 //added for WMM 2006/8/2
+#define IEEE80211_STYPE_QOS_DATA 0x0080 /* added for WMM 2006/8/2 */
#define IEEE80211_STYPE_QOS_NULL 0x00C0
#define IEEE80211_SCTL_FRAG 0x000F
@@ -410,7 +414,7 @@ struct ieee_param {
#define FC_QOS_BIT BIT(7)
#define IsDataFrame(pdu) (((pdu[0] & 0x0C) == 0x08) ? true : false)
#define IsLegacyDataFrame(pdu) (IsDataFrame(pdu) && (!(pdu[0] & FC_QOS_BIT)))
-//added by wb. Is this right?
+/* added by wb. Is this right? */
#define IsQoSDataFrame(pframe) ((*(u16 *)pframe & (IEEE80211_STYPE_QOS_DATA | IEEE80211_FTYPE_DATA)) == (IEEE80211_STYPE_QOS_DATA | IEEE80211_FTYPE_DATA))
#define Frame_Order(pframe) (*(u16 *)pframe & IEEE80211_FCTL_ORDER)
#define SN_LESS(a, b) (((a - b) & 0x800) != 0)
@@ -450,8 +454,8 @@ extern u32 ieee80211_debug_level;
#define IEEE80211_DEBUG(level, fmt, args...) \
do { if (ieee80211_debug_level & (level)) \
printk(KERN_DEBUG "ieee80211: " fmt, ## args); } while (0)
-//wb added to debug out data buf
-//if you want print DATA buffer related BA, please set ieee80211_debug_level to DATA|BA
+/* wb added to debug out data buf */
+/* if you want print DATA buffer related BA, please set ieee80211_debug_level to DATA|BA */
#define IEEE80211_DEBUG_DATA(level, data, datalen) \
do { if ((ieee80211_debug_level & (level)) == (level)) \
{ \
@@ -511,16 +515,16 @@ do { if (ieee80211_debug_level & (level)) \
#define IEEE80211_DL_TX (1<<8)
#define IEEE80211_DL_RX (1<<9)
-#define IEEE80211_DL_HT (1<<10) //HT
-#define IEEE80211_DL_BA (1<<11) //ba
-#define IEEE80211_DL_TS (1<<12) //TS
+#define IEEE80211_DL_HT (1<<10) /* HT */
+#define IEEE80211_DL_BA (1<<11) /* ba */
+#define IEEE80211_DL_TS (1<<12) /* TS */
#define IEEE80211_DL_QOS (1<<13)
#define IEEE80211_DL_REORDER (1<<14)
#define IEEE80211_DL_IOT (1<<15)
#define IEEE80211_DL_IPS (1<<16)
-#define IEEE80211_DL_TRACE (1<<29) //trace function, need to user net_ratelimit() together in order not to print too much to the screen
-#define IEEE80211_DL_DATA (1<<30) //use this flag to control whether print data buf out.
-#define IEEE80211_DL_ERR (1<<31) //always open
+#define IEEE80211_DL_TRACE (1<<29) /* trace function, need to user net_ratelimit() together in order not to print too much to the screen */
+#define IEEE80211_DL_DATA (1<<30) /* use this flag to control whether print data buf out. */
+#define IEEE80211_DL_ERR (1<<31) /* always open */
#define IEEE80211_ERROR(f, a...) printk(KERN_ERR "ieee80211: " f, ## a)
#define IEEE80211_WARNING(f, a...) printk(KERN_WARNING "ieee80211: " f, ## a)
#define IEEE80211_DEBUG_INFO(f, a...) IEEE80211_DEBUG(IEEE80211_DL_INFO, f, ## a)
@@ -539,9 +543,9 @@ do { if (ieee80211_debug_level & (level)) \
#include <linux/if_arp.h> /* ARPHRD_ETHER */
#ifndef WIRELESS_SPY
-#define WIRELESS_SPY // enable iwspy support
+#define WIRELESS_SPY /* enable iwspy support */
#endif
-#include <net/iw_handler.h> // new driver API
+#include <net/iw_handler.h> /* new driver API */
#ifndef ETH_P_PAE
#define ETH_P_PAE 0x888E /* Port Access Entity (IEEE 802.1X) */
@@ -660,7 +664,7 @@ struct ieee80211_snap_hdr {
#define IEEE80211_OFDM_SHIFT_MASK_A 4
-/* this is stolen and modified from the madwifi driver*/
+/* this is stolen and modified from the madwifi driver */
#define IEEE80211_FC0_TYPE_MASK 0x0c
#define IEEE80211_FC0_TYPE_DATA 0x08
#define IEEE80211_FC0_SUBTYPE_MASK 0xB0
@@ -700,28 +704,28 @@ struct ieee80211_rx_stats {
u8 nic_type;
u16 Length;
// u8 DataRate; // In 0.5 Mbps
- u8 SignalQuality; // in 0-100 index.
- s32 RecvSignalPower; // Real power in dBm for this packet, no beautification and aggregation.
- s8 RxPower; // in dBm Translate from PWdB
- u8 SignalStrength; // in 0-100 index.
+ u8 SignalQuality; /* in 0-100 index. */
+ s32 RecvSignalPower; /* Real power in dBm for this packet, no beautification and aggregation. */
+ s8 RxPower; /* in dBm Translate from PWdB */
+ u8 SignalStrength; /* in 0-100 index. */
u16 bHwError:1;
u16 bCRC:1;
u16 bICV:1;
u16 bShortPreamble:1;
- u16 Antenna:1; //for rtl8185
- u16 Decrypted:1; //for rtl8185, rtl8187
- u16 Wakeup:1; //for rtl8185
- u16 Reserved0:1; //for rtl8185
+ u16 Antenna:1; /* for rtl8185 */
+ u16 Decrypted:1; /* for rtl8185, rtl8187 */
+ u16 Wakeup:1; /* for rtl8185 */
+ u16 Reserved0:1; /* for rtl8185 */
u8 AGC;
u32 TimeStampLow;
u32 TimeStampHigh;
bool bShift;
- bool bIsQosData; // Added by Annie, 2005-12-22.
+ bool bIsQosData; /* Added by Annie, 2005-12-22. */
u8 UserPriority;
- //1!!!!!!!!!!!!!!!!!!!!!!!!!!!
- //1Attention Please!!!<11n or 8190 specific code should be put below this line>
- //1!!!!!!!!!!!!!!!!!!!!!!!!!!!
+ /*
+ * Attention Please!!!<11n or 8190 specific code should be put below this line>
+ */
u8 RxDrvInfoSize;
u8 RxBufShift;
@@ -730,21 +734,21 @@ struct ieee80211_rx_stats {
bool bContainHTC;
bool RxIs40MHzPacket;
u32 RxPWDBAll;
- u8 RxMIMOSignalStrength[4]; // in 0~100 index
+ u8 RxMIMOSignalStrength[4]; /* in 0~100 index */
s8 RxMIMOSignalQuality[2];
bool bPacketMatchBSSID;
bool bIsCCK;
bool bPacketToSelf;
- //added by amy
+ /* added by amy */
u8 *virtual_address;
- u16 packetlength; // Total packet length: Must equal to sum of all FragLength
- u16 fraglength; // FragLength should equal to PacketLength in non-fragment case
- u16 fragoffset; // Data offset for this fragment
+ u16 packetlength; /* Total packet length: Must equal to sum of all FragLength */
+ u16 fraglength; /* FragLength should equal to PacketLength in non-fragment case */
+ u16 fragoffset; /* Data offset for this fragment */
u16 ntotalfrag;
bool bisrxaggrsubframe;
- bool bPacketBeacon; //cosa add for rssi
- bool bToSelfBA; //cosa add for rssi
- s8 cck_adc_pwdb[4]; //cosa add for rx path selection
+ bool bPacketBeacon; /* cosa add for rssi */
+ bool bToSelfBA; /* cosa add for rssi */
+ s8 cck_adc_pwdb[4]; /* cosa add for rx path selection */
u16 Seq_Num;
};
@@ -1064,7 +1068,7 @@ typedef union _frameqos {
#define MAX_CHANNEL_NUMBER 161
#define IEEE80211_SOFTMAC_SCAN_TIME 100
-//(HZ / 2)
+/* (HZ / 2) */
#define IEEE80211_SOFTMAC_ASSOC_RETRY_TIME (HZ * 2)
#define CRC_LENGTH 4U
@@ -1185,7 +1189,7 @@ static inline const char *eap_get_type(int type)
{
return ((u32)type >= ARRAY_SIZE(eap_types)) ? "Unknown" : eap_types[type];
}
-//added by amy for reorder
+/* added by amy for reorder */
static inline u8 Frame_QoSTID(u8 *buf)
{
struct rtl_80211_hdr_3addr *hdr;
@@ -1195,7 +1199,7 @@ static inline u8 Frame_QoSTID(u8 *buf)
return (u8)((frameqos *)(buf + (((fc & IEEE80211_FCTL_TODS) && (fc & IEEE80211_FCTL_FROMDS)) ? 30 : 24)))->field.tid;
}
-//added by amy for reorder
+/* added by amy for reorder */
struct eapol {
u8 snap[6];
@@ -1253,7 +1257,7 @@ struct ieee80211_info_element_hdr {
*/
#define IEEE80211_DEFAULT_TX_ESSID "Penguin"
-#define IEEE80211_DEFAULT_BASIC_RATE 2 //1Mbps
+#define IEEE80211_DEFAULT_BASIC_RATE 2 /* 1Mbps */
enum {WMM_all_frame, WMM_two_frame, WMM_four_frame, WMM_six_frame};
#define MAX_SP_Len (WMM_all_frame << 4)
@@ -1269,7 +1273,7 @@ enum {WMM_all_frame, WMM_two_frame, WMM_four_frame, WMM_six_frame};
#define IEEE80211_PS_UNICAST IEEE80211_DTIM_UCAST
#define IEEE80211_PS_MBCAST IEEE80211_DTIM_MBCAST
-//added by David for QoS 2006/6/30
+/* added by David for QoS 2006/6/30 */
//#define WMM_Hang_8187
#ifdef WMM_Hang_8187
#undef WMM_Hang_8187
@@ -1285,7 +1289,7 @@ enum {WMM_all_frame, WMM_two_frame, WMM_four_frame, WMM_six_frame};
#define MAX_RECEIVE_BUFFER_SIZE 9100
-//UP Mapping to AC, using in MgntQuery_SequenceNumber() and maybe for DSCP
+/* UP Mapping to AC, using in MgntQuery_SequenceNumber() and maybe for DSCP */
//#define UP2AC(up) ((up<3) ? ((up==0)?1:0) : (up>>1))
#define UP2AC(up) ( \
((up) < 1) ? WME_AC_BE : \
@@ -1293,7 +1297,7 @@ enum {WMM_all_frame, WMM_two_frame, WMM_four_frame, WMM_six_frame};
((up) < 4) ? WME_AC_BE : \
((up) < 6) ? WME_AC_VI : \
WME_AC_VO)
-//AC Mapping to UP, using in Tx part for selecting the corresponding TX queue
+/* AC Mapping to UP, using in Tx part for selecting the corresponding TX queue */
#define AC2UP(_ac) ( \
((_ac) == WME_AC_VO) ? 6 : \
((_ac) == WME_AC_VI) ? 5 : \
@@ -1328,7 +1332,7 @@ struct ieee80211_network {
u8 bssid[ETH_ALEN]; /* u16 aligned! */
u8 channel;
- // CCXv4 S59, MBSSID.
+ /* CCXv4 S59, MBSSID. */
bool bMBssidValid;
u8 MBssid[ETH_ALEN]; /* u16 aligned! */
u8 MBssidMask;
@@ -1337,12 +1341,12 @@ struct ieee80211_network {
u8 ssid_len;
struct ieee80211_qos_data qos_data;
- //added by amy for LEAP
+ /* added by amy for LEAP */
bool bWithAironetIE;
bool bCkipSupported;
bool bCcxRmEnable;
u16 CcxRmState[2];
- // CCX 2 S38, WLAN Device Version Number element. Annie, 2006-08-20.
+ /* CCX 2 S38, WLAN Device Version Number element. Annie, 2006-08-20. */
bool bWithCcxVerNum;
u8 BssCcxVerNumber;
/* These are network statistics */
@@ -1371,18 +1375,18 @@ struct ieee80211_network {
u8 dtim_data;
u32 last_dtim_sta_time[2];
- //appeded for QoS
+ /* appeded for QoS */
u8 wmm_info;
struct ieee80211_wmm_ac_param wmm_param[4];
u8 QoS_Enable;
#ifdef THOMAS_TURBO
- u8 Turbo_Enable;//enable turbo mode, added by thomas
+ u8 Turbo_Enable; /* enable turbo mode, added by thomas */
#endif
u16 CountryIeLen;
u8 CountryIeBuf[MAX_IE_LEN];
- // HT Related, by amy, 2008.04.29
+ /* HT Related, by amy, 2008.04.29 */
BSS_HT bssht;
- // Add to handle broadcom AP management frame CCK rate.
+ /* Add to handle broadcom AP management frame CCK rate. */
bool broadcom_cap_exist;
bool ralink_cap_exist;
bool atheros_cap_exist;
@@ -1391,7 +1395,7 @@ struct ieee80211_network {
// u8 berp_info;
bool berp_info_valid;
bool buseprotection;
- //put at the end of the structure.
+ /* put at the end of the structure. */
struct list_head list;
};
@@ -1466,7 +1470,7 @@ struct bandwidth_autoswitch {
};
-//added by amy for order
+/* added by amy for order */
#define REORDER_WIN_SIZE 128
#define REORDER_ENTRY_NUM 128
@@ -1475,18 +1479,18 @@ struct rx_reorder_entry {
u16 SeqNum;
struct ieee80211_rxb *prxb;
};
-//added by amy for order
+/* added by amy for order */
typedef enum _Fsync_State {
Default_Fsync,
HW_Fsync,
SW_Fsync
} Fsync_State;
-// Power save mode configured.
+/* Power save mode configured. */
typedef enum _RT_PS_MODE {
- eActive, // Active/Continuous access.
- eMaxPs, // Max power save mode.
- eFastPs // Fast power save mode.
+ eActive, /* Active/Continuous access. */
+ eMaxPs, /* Max power save mode. */
+ eFastPs /* Fast power save mode. */
} RT_PS_MODE;
typedef enum _IPS_CALLBACK_FUNCION {
@@ -1505,9 +1509,9 @@ typedef enum _RT_JOIN_ACTION {
struct ibss_parms {
u16 atimWin;
};
-#define MAX_NUM_RATES 264 // Max num of support rates element: 8, Max num of ext. support rate: 255. 061122, by rcnjko.
+#define MAX_NUM_RATES 264 /* Max num of support rates element: 8, Max num of ext. support rate: 255. 061122, by rcnjko. */
-// RF state.
+/* RF state. */
typedef enum _RT_RF_POWER_STATE {
eRfOn,
eRfSleep,
@@ -1516,9 +1520,9 @@ typedef enum _RT_RF_POWER_STATE {
struct rt_power_save_control {
- //
- // Inactive Power Save(IPS) : Disable RF when disconnected
- //
+ /*
+ * Inactive Power Save(IPS) : Disable RF when disconnected
+ */
bool bInactivePs;
bool bIPSModeBackup;
bool bSwRfProcessing;
@@ -1526,15 +1530,15 @@ struct rt_power_save_control {
struct work_struct InactivePsWorkItem;
struct timer_list InactivePsTimer;
- // Return point for join action
+ /* Return point for join action */
IPS_CALLBACK_FUNCION ReturnPoint;
- // Recored Parameters for rescheduled JoinRequest
+ /* Recored Parameters for rescheduled JoinRequest */
bool bTmpBssDesc;
RT_JOIN_ACTION tmpJoinAction;
struct ieee80211_network tmpBssDesc;
- // Recored Parameters for rescheduled MgntLinkRequest
+ /* Recored Parameters for rescheduled MgntLinkRequest */
bool bTmpScanOnly;
bool bTmpActiveScan;
bool bTmpFilterHiddenAP;
@@ -1553,9 +1557,9 @@ struct rt_power_save_control {
struct ibss_parms tmpIbpm;
bool bTmpIbpm;
- //
- // Leisre Poswer Save : Disable RF if connected but traffic is not busy
- //
+ /*
+ * Leisre Poswer Save : Disable RF if connected but traffic is not busy
+ */
bool bLeisurePs;
};
@@ -1565,7 +1569,7 @@ typedef u32 RT_RF_CHANGE_SOURCE;
#define RF_CHANGE_BY_HW BIT(30)
#define RF_CHANGE_BY_PS BIT(29)
#define RF_CHANGE_BY_IPS BIT(28)
-#define RF_CHANGE_BY_INIT 0 // Do not change the RFOff reason. Defined by Bruce, 2008-01-17.
+#define RF_CHANGE_BY_INIT 0 /* Do not change the RFOff reason. Defined by Bruce, 2008-01-17. */
typedef enum {
COUNTRY_CODE_FCC = 0,
@@ -1587,9 +1591,9 @@ struct rt_link_detect {
u32 NumRecvBcnInPeriod;
u32 NumRecvDataInPeriod;
- u32 RxBcnNum[RT_MAX_LD_SLOT_NUM]; // number of Rx beacon / CheckForHang_period to determine link status
- u32 RxDataNum[RT_MAX_LD_SLOT_NUM]; // number of Rx data / CheckForHang_period to determine link status
- u16 SlotNum; // number of CheckForHang period to determine link status
+ u32 RxBcnNum[RT_MAX_LD_SLOT_NUM]; /* number of Rx beacon / CheckForHang_period to determine link status */
+ u32 RxDataNum[RT_MAX_LD_SLOT_NUM]; /* number of Rx data / CheckForHang_period to determine link status */
+ u16 SlotNum; /* number of CheckForHang period to determine link status */
u16 SlotIndex;
u32 NumTxOkInPeriod;
@@ -1602,36 +1606,36 @@ struct ieee80211_device {
struct net_device *dev;
struct ieee80211_security sec;
- //hw security related
+ /* hw security related */
// u8 hwsec_support; //support?
- u8 hwsec_active; //hw security active.
+ u8 hwsec_active; /* hw security active. */
bool is_silent_reset;
bool ieee_up;
- //added by amy
+ /* added by amy */
bool bSupportRemoteWakeUp;
- RT_PS_MODE dot11PowerSaveMode; // Power save mode configured.
+ RT_PS_MODE dot11PowerSaveMode; /* Power save mode configured. */
bool actscanning;
bool beinretry;
RT_RF_POWER_STATE eRFPowerState;
RT_RF_CHANGE_SOURCE RfOffReason;
bool is_set_key;
- //11n spec related I wonder if These info structure need to be moved out of ieee80211_device
+ /* 11n spec related I wonder if These info structure need to be moved out of ieee80211_device */
- //11n HT below
+ /* 11n HT below */
PRT_HIGH_THROUGHPUT pHTInfo;
//struct timer_list SwBwTimer;
// spinlock_t chnlop_spinlock;
spinlock_t bw_spinlock;
spinlock_t reorder_spinlock;
- // for HT operation rate set. we use this one for HT data rate to separate different descriptors
- //the way fill this is the same as in the IE
- u8 Regdot11HTOperationalRateSet[16]; //use RATR format
- u8 dot11HTOperationalRateSet[16]; //use RATR format
+ /* for HT operation rate set. we use this one for HT data rate to separate different descriptors */
+ /* the way fill this is the same as in the IE */
+ u8 Regdot11HTOperationalRateSet[16]; /* use RATR format */
+ u8 dot11HTOperationalRateSet[16]; /* use RATR format */
u8 RegHTSuppRateSet[16];
u8 HTCurrentOperaRate;
u8 HTHighestOperaRate;
- //wb added for rate operation mode to firmware
+ /* wb added for rate operation mode to firmware */
u8 bTxDisableRateFallBack;
u8 bTxUseDriverAssingedRate;
atomic_t atm_chnlop;
@@ -1639,12 +1643,12 @@ struct ieee80211_device {
// u8 HTHighestOperaRate;
// u8 HTCurrentOperaRate;
- // 802.11e and WMM Traffic Stream Info (TX)
+ /* 802.11e and WMM Traffic Stream Info (TX) */
struct list_head Tx_TS_Admit_List;
struct list_head Tx_TS_Pending_List;
struct list_head Tx_TS_Unused_List;
struct tx_ts_record TxTsRecord[TOTAL_TS_NUM];
- // 802.11e and WMM Traffic Stream Info (RX)
+ /* 802.11e and WMM Traffic Stream Info (RX) */
struct list_head Rx_TS_Admit_List;
struct list_head Rx_TS_Pending_List;
struct list_head Rx_TS_Unused_List;
@@ -1653,9 +1657,9 @@ struct ieee80211_device {
struct rx_reorder_entry RxReorderEntry[128];
struct list_head RxReorder_Unused_List;
//#endif
- // Qos related. Added by Annie, 2005-11-01.
+ /* Qos related. Added by Annie, 2005-11-01. */
// PSTA_QOS pStaQos;
- u8 ForcedPriority; // Force per-packet priority 1~7. (default: 0, not to force it.)
+ u8 ForcedPriority; /* Force per-packet priority 1~7. (default: 0, not to force it.) */
/* Bookkeeping structures */
@@ -1725,7 +1729,7 @@ struct ieee80211_device {
*/
/* Fragmentation structures */
- // each streaming contain a entry
+ /* each streaming contain a entry */
struct ieee80211_frag_entry frag_cache[17][IEEE80211_FRAG_CACHE_LEN];
unsigned int frag_next_idx[17];
u16 fts; /* Fragmentation Threshold */
@@ -1767,12 +1771,12 @@ struct ieee80211_device {
u16 prev_seq_ctl; /* used to drop duplicate frames */
/* map of allowed channels. 0 is dummy */
- // FIXME: remember to default to a basic channel plan depending of the PHY type
+ /* FIXME: remember to default to a basic channel plan depending of the PHY type */
void *dot11d_info;
bool bGlobalDomain;
int rate; /* current rate */
int basic_rate;
- //FIXME: pleace callback, see if redundant with softmac_features
+ /* FIXME: pleace callback, see if redundant with softmac_features */
short active_scan;
/* this contains flags for selectively enable softmac support */
@@ -1813,8 +1817,8 @@ struct ieee80211_device {
short wap_set;
short ssid_set;
- u8 wpax_type_set; //{added by David, 2006.9.28}
- u32 wpax_type_notify; //{added by David, 2006.9.26}
+ u8 wpax_type_set; /* {added by David, 2006.9.28} */
+ u32 wpax_type_notify; /* {added by David, 2006.9.26} */
/* QoS related flag */
s8 init_wmmparam_flag;
@@ -1836,7 +1840,7 @@ struct ieee80211_device {
struct sk_buff *mgmt_queue_ring[MGMT_QUEUE_NUM];
int mgmt_queue_head;
int mgmt_queue_tail;
-//{ added for rtl819x
+/* { added for rtl819x */
#define IEEE80211_QUEUE_LIMIT 128
u8 AsocRetryCount;
unsigned int hw_header;
@@ -1845,12 +1849,12 @@ struct ieee80211_device {
struct sk_buff_head skb_drv_aggQ[MAX_QUEUE_SIZE];
u32 sta_edca_param[4];
bool aggregation;
- // Enable/Disable Rx immediate BA capability.
+ /* Enable/Disable Rx immediate BA capability. */
bool enable_rx_imm_BA;
bool bibsscoordinator;
- //+by amy for DM ,080515
- //Dynamic Tx power for near/far range enable/Disable , by amy , 2008-05-15
+ /* +by amy for DM ,080515 */
+ /* Dynamic Tx power for near/far range enable/Disable , by amy , 2008-05-15 */
bool bdynamic_txpower_enable;
bool bCTSToSelfEnable;
@@ -1861,21 +1865,21 @@ struct ieee80211_device {
u8 fsync_rssi_threshold;
bool bfsync_enable;
- u8 fsync_multiple_timeinterval; // FsyncMultipleTimeInterval * FsyncTimeInterval
- u32 fsync_firstdiff_ratethreshold; // low threshold
- u32 fsync_seconddiff_ratethreshold; // decrease threshold
+ u8 fsync_multiple_timeinterval; /* FsyncMultipleTimeInterval * FsyncTimeInterval */
+ u32 fsync_firstdiff_ratethreshold; /* low threshold */
+ u32 fsync_seconddiff_ratethreshold; /* decrease threshold */
Fsync_State fsync_state;
bool bis_any_nonbepkts;
- //20Mhz 40Mhz AutoSwitch Threshold
+ /* 20Mhz 40Mhz AutoSwitch Threshold */
struct bandwidth_autoswitch bandwidth_auto_switch;
- //for txpower tracking
+ /* for txpower tracking */
bool FwRWRF;
- //added by amy for AP roaming
+ /* added by amy for AP roaming */
struct rt_link_detect LinkDetectInfo;
- //added by amy for ps
+ /* added by amy for ps */
struct rt_power_save_control PowerSaveControl;
-//}
+/* } */
/* used if IEEE_SOFTMAC_TX_QUEUE is set */
struct tx_pending tx_pending;
@@ -1891,11 +1895,11 @@ struct ieee80211_device {
struct delayed_work start_ibss_wq;
struct work_struct wx_sync_scan_wq;
struct workqueue_struct *wq;
- // Qos related. Added by Annie, 2005-11-01.
- //STA_QOS StaQos;
+ /* Qos related. Added by Annie, 2005-11-01. */
+ /* STA_QOS StaQos; */
- //u32 STA_EDCA_PARAM[4];
- //CHANNEL_ACCESS_SETTING ChannelAccessSetting;
+ /* u32 STA_EDCA_PARAM[4]; */
+ /* CHANNEL_ACCESS_SETTING ChannelAccessSetting; */
struct ieee80211_rxb *stats_IndicateArray[REORDER_WIN_SIZE];
@@ -1997,7 +2001,7 @@ struct ieee80211_device {
/* check whether Tx hw resource available */
short (*check_nic_enough_desc)(struct net_device *dev, int queue_index);
- //added by wb for HT related
+ /* added by wb for HT related */
// void (*SwChnlByTimerHandler)(struct net_device *dev, int channel);
void (*SetBWModeHandler)(struct net_device *dev, enum ht_channel_width Bandwidth, enum ht_extension_chan_offset Offset);
// void (*UpdateHalRATRTableHandler)(struct net_device* dev, u8* pMcsRate);
@@ -2349,8 +2353,8 @@ int ieee80211_wx_set_rts(struct ieee80211_device *ieee,
int ieee80211_wx_get_rts(struct ieee80211_device *ieee,
struct iw_request_info *info,
union iwreq_data *wrqu, char *extra);
-//HT
-#define MAX_RECEIVE_BUFFER_SIZE 9100 //
+/* HT */
+#define MAX_RECEIVE_BUFFER_SIZE 9100
void HTDebugHTCapability(u8 *CapIE, u8 *TitleString);
void HTDebugHTInfo(u8 *InfoIE, u8 *TitleString);
@@ -2378,7 +2382,7 @@ u8 HTCCheck(struct ieee80211_device *ieee, u8 *pFrame);
void HTResetIOTSetting(PRT_HIGH_THROUGHPUT pHTInfo);
bool IsHTHalfNmodeAPs(struct ieee80211_device *ieee);
u16 TxCountToDataRate(struct ieee80211_device *ieee, u8 nDataRate);
-//function in BAPROC.c
+/* function in BAPROC.c */
int ieee80211_rx_ADDBAReq(struct ieee80211_device *ieee, struct sk_buff *skb);
int ieee80211_rx_ADDBARsp(struct ieee80211_device *ieee, struct sk_buff *skb);
int ieee80211_rx_DELBA(struct ieee80211_device *ieee, struct sk_buff *skb);
@@ -2390,13 +2394,13 @@ void BaSetupTimeOut(struct timer_list *t);
void TxBaInactTimeout(struct timer_list *t);
void RxBaInactTimeout(struct timer_list *t);
void ResetBaEntry(struct ba_record *pBA);
-//function in TS.c
+/* function in TS.c */
bool GetTs(
struct ieee80211_device *ieee,
struct ts_common_info **ppTS,
u8 *Addr,
u8 TID,
- enum tr_select TxRxSelect, //Rx:1, Tx:0
+ enum tr_select TxRxSelect, /* Rx:1, Tx:0 */
bool bAddNewTs
);
void TSInitialize(struct ieee80211_device *ieee);
diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211_crypt.c b/drivers/staging/rtl8192u/ieee80211/ieee80211_crypt.c
index 36987fccac5d..a47ba3607b78 100644
--- a/drivers/staging/rtl8192u/ieee80211/ieee80211_crypt.c
+++ b/drivers/staging/rtl8192u/ieee80211/ieee80211_crypt.c
@@ -81,7 +81,8 @@ void ieee80211_crypt_delayed_deinit(struct ieee80211_device *ieee,
tmp = *crypt;
*crypt = NULL;
- /* must not run ops->deinit() while there may be pending encrypt or
+ /*
+ * must not run ops->deinit() while there may be pending encrypt or
* decrypt operations. Use a list of delayed deinits to avoid needing
* locking.
*/
diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211_crypt.h b/drivers/staging/rtl8192u/ieee80211/ieee80211_crypt.h
index d3bd5598b25b..4fbc5241f7b5 100644
--- a/drivers/staging/rtl8192u/ieee80211/ieee80211_crypt.h
+++ b/drivers/staging/rtl8192u/ieee80211/ieee80211_crypt.h
@@ -24,7 +24,8 @@
struct ieee80211_crypto_ops {
const char *name;
- /* init new crypto context (e.g., allocate private data space,
+ /*
+ * init new crypto context (e.g., allocate private data space,
* select IV, etc.); returns NULL on failure or pointer to allocated
* private data on success
*/
@@ -33,7 +34,8 @@ struct ieee80211_crypto_ops {
/* deinitialize crypto context and free allocated private data */
void (*deinit)(void *priv);
- /* encrypt/decrypt return < 0 on error or >= 0 on success. The return
+ /*
+ * encrypt/decrypt return < 0 on error or >= 0 on success. The return
* value from decrypt_mpdu is passed as the keyidx value for
* decrypt_msdu. skb must have enough head and tail room for the
* encryption; if not, error will be returned; these functions are
@@ -42,7 +44,8 @@ struct ieee80211_crypto_ops {
int (*encrypt_mpdu)(struct sk_buff *skb, int hdr_len, void *priv);
int (*decrypt_mpdu)(struct sk_buff *skb, int hdr_len, void *priv);
- /* These functions are called for full MSDUs, i.e. full frames.
+ /*
+ * These functions are called for full MSDUs, i.e. full frames.
* These can be NULL if full MSDU operations are not needed.
*/
int (*encrypt_msdu)(struct sk_buff *skb, int hdr_len, void *priv);
@@ -52,12 +55,14 @@ struct ieee80211_crypto_ops {
int (*set_key)(void *key, int len, u8 *seq, void *priv);
int (*get_key)(void *key, int len, u8 *seq, void *priv);
- /* procfs handler for printing out key information and possible
+ /*
+ * procfs handler for printing out key information and possible
* statistics
*/
char * (*print_stats)(char *p, void *priv);
- /* maximum number of bytes added by encryption; encrypt buf is
+ /*
+ * maximum number of bytes added by encryption; encrypt buf is
* allocated with extra_prefix_len bytes, copy of in_buf, and
* extra_postfix_len; encrypt need not use all this space, but
* the result must start at the beginning of the buffer and correct
diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211_crypt_ccmp.c b/drivers/staging/rtl8192u/ieee80211/ieee80211_crypt_ccmp.c
index d7188b3f3190..ad0b918ecf0d 100644
--- a/drivers/staging/rtl8192u/ieee80211/ieee80211_crypt_ccmp.c
+++ b/drivers/staging/rtl8192u/ieee80211/ieee80211_crypt_ccmp.c
@@ -133,7 +133,8 @@ static void ccmp_init_blocks(struct crypto_tfm *tfm,
qc = *pos & 0x0f;
aad_len += 2;
}
- /* CCM Initial Block:
+ /*
+ * CCM Initial Block:
* Flag (Include authentication header, M=3 (8-octet MIC),
* L=1 (2-octet Dlen))
* Nonce: 0x00 | A2 | PN
@@ -146,7 +147,8 @@ static void ccmp_init_blocks(struct crypto_tfm *tfm,
b0[14] = (dlen >> 8) & 0xff;
b0[15] = dlen & 0xff;
- /* AAD:
+ /*
+ * AAD:
* FC with bits 4..6 and 11..13 masked to zero; 14 is always one
* A1 | A2 | A3
* SC with bits 4..15 (seq#) masked to zero
diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211_crypt_tkip.c b/drivers/staging/rtl8192u/ieee80211/ieee80211_crypt_tkip.c
index 0927b2b15151..db4b640d1d8c 100644
--- a/drivers/staging/rtl8192u/ieee80211/ieee80211_crypt_tkip.c
+++ b/drivers/staging/rtl8192u/ieee80211/ieee80211_crypt_tkip.c
@@ -567,11 +567,11 @@ static int ieee80211_michael_mic_add(struct sk_buff *skb, int hdr_len, void *pri
michael_mic_hdr(skb, tkey->tx_hdr);
- // { david, 2006.9.1
- // fix the wpa process with wmm enabled.
+ /* { david, 2006.9.1 */
+ /* fix the wpa process with wmm enabled. */
if (IEEE80211_QOS_HAS_SEQ(le16_to_cpu(hdr->frame_ctl)))
tkey->tx_hdr[12] = *(skb->data + hdr_len - 2) & 0x07;
- // }
+ /* } */
pos = skb_put(skb, 8);
if (michael_mic(tkey->tx_tfm_michael, &tkey->key[16], tkey->tx_hdr,
@@ -615,11 +615,11 @@ static int ieee80211_michael_mic_verify(struct sk_buff *skb, int keyidx,
return -1;
michael_mic_hdr(skb, tkey->rx_hdr);
- // { david, 2006.9.1
- // fix the wpa process with wmm enabled.
+ /* { david, 2006.9.1 */
+ /* fix the wpa process with wmm enabled. */
if (IEEE80211_QOS_HAS_SEQ(le16_to_cpu(hdr->frame_ctl)))
tkey->rx_hdr[12] = *(skb->data + hdr_len - 2) & 0x07;
- // }
+ /* } */
if (michael_mic(tkey->rx_tfm_michael, &tkey->key[24], tkey->rx_hdr,
skb->data + hdr_len, skb->len - 8 - hdr_len, mic))
diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211_crypt_wep.c b/drivers/staging/rtl8192u/ieee80211/ieee80211_crypt_wep.c
index 805493a0870d..9cb386436377 100644
--- a/drivers/staging/rtl8192u/ieee80211/ieee80211_crypt_wep.c
+++ b/drivers/staging/rtl8192u/ieee80211/ieee80211_crypt_wep.c
@@ -72,7 +72,8 @@ static void prism2_wep_deinit(void *priv)
kfree(priv);
}
-/* Perform WEP encryption on given skb that has at least 4 bytes of headroom
+/*
+ * Perform WEP encryption on given skb that has at least 4 bytes of headroom
* for IV and 4 bytes of tailroom for ICV. Both IV and ICV will be transmitted,
* so the payload length increases with 8 bytes.
*
@@ -103,7 +104,8 @@ static int prism2_wep_encrypt(struct sk_buff *skb, int hdr_len, void *priv)
wep->iv++;
- /* Fluhrer, Mantin, and Shamir have reported weaknesses in the key
+ /*
+ * Fluhrer, Mantin, and Shamir have reported weaknesses in the key
* scheduling algorithm of RC4. At least IVs (KeyByte + 3, 0xff, N)
* can be used to speedup attacks, so avoid using them.
*/
@@ -150,7 +152,8 @@ static int prism2_wep_encrypt(struct sk_buff *skb, int hdr_len, void *priv)
}
-/* Perform WEP decryption on given buffer. Buffer includes whole WEP part of
+/*
+ * Perform WEP decryption on given buffer. Buffer includes whole WEP part of
* the frame: IV (4 bytes), encrypted payload (including SNAP header),
* ICV (4 bytes). len includes both IV and ICV.
*
diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211_module.c b/drivers/staging/rtl8192u/ieee80211/ieee80211_module.c
index d7975aa335b2..dd7ff7e84bd0 100644
--- a/drivers/staging/rtl8192u/ieee80211/ieee80211_module.c
+++ b/drivers/staging/rtl8192u/ieee80211/ieee80211_module.c
@@ -158,7 +158,8 @@ struct net_device *alloc_ieee80211(int sizeof_priv)
if (ieee->pHTInfo == NULL) {
IEEE80211_DEBUG(IEEE80211_DL_ERR, "can't alloc memory for HTInfo\n");
- /* By this point in code ieee80211_networks_allocate() has been
+ /*
+ * By this point in code ieee80211_networks_allocate() has been
* successfully called so the memory allocated should be freed
*/
ieee80211_networks_free(ieee);
diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c b/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c
index 0e762e559675..eebd8deb0087 100644
--- a/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c
+++ b/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c
@@ -143,8 +143,10 @@ ieee80211_frag_cache_get(struct ieee80211_device *ieee,
memcpy(entry->src_addr, hdr->addr2, ETH_ALEN);
memcpy(entry->dst_addr, hdr->addr1, ETH_ALEN);
} else {
- /* received a fragment of a frame for which the head fragment
- * should have already been received */
+ /*
+ * received a fragment of a frame for which the head fragment
+ * should have already been received
+ */
entry = ieee80211_frag_cache_find(ieee, seq, frag, tid,hdr->addr2,
hdr->addr1);
if (entry) {
@@ -199,17 +201,20 @@ static int ieee80211_frag_cache_invalidate(struct ieee80211_device *ieee,
-/* ieee80211_rx_frame_mgtmt
+/*
+ * ieee80211_rx_frame_mgtmt
*
* Responsible for handling management control frames
*
- * Called by ieee80211_rx */
+ * Called by ieee80211_rx
+ */
static inline int
ieee80211_rx_frame_mgmt(struct ieee80211_device *ieee, struct sk_buff *skb,
struct ieee80211_rx_stats *rx_stats, u16 type,
u16 stype)
{
- /* On the struct stats definition there is written that
+ /*
+ * On the struct stats definition there is written that
* this is not mandatory.... but seems that the probe
* response parser uses it
*/
@@ -244,15 +249,19 @@ ieee80211_rx_frame_mgmt(struct ieee80211_device *ieee, struct sk_buff *skb,
if (stype == WLAN_FC_STYPE_BEACON &&
ieee->iw_mode == IW_MODE_MASTER) {
struct sk_buff *skb2;
- /* Process beacon frames also in kernel driver to
- * update STA(AP) table statistics */
+ /*
+ * Process beacon frames also in kernel driver to
+ * update STA(AP) table statistics
+ */
skb2 = skb_clone(skb, GFP_ATOMIC);
if (skb2)
hostap_rx(skb2->dev, skb2, rx_stats);
}
- /* send management frames to the user space daemon for
- * processing */
+ /*
+ * send management frames to the user space daemon for
+ * processing
+ */
ieee->apdevstats.rx_packets++;
ieee->apdevstats.rx_bytes += skb->len;
prism2_rx_80211(ieee->apdev, skb, rx_stats, PRISM2_RX_MGMT);
@@ -425,18 +434,18 @@ static int is_duplicate_packet(struct ieee80211_device *ieee,
u8 tid;
- //TO2DS and QoS
+ /* TO2DS and QoS */
if(((fc & IEEE80211_FCTL_DSTODS) == IEEE80211_FCTL_DSTODS)&&IEEE80211_QOS_HAS_SEQ(fc)) {
hdr_4addrqos = (struct rtl_80211_hdr_4addrqos *)header;
tid = le16_to_cpu(hdr_4addrqos->qos_ctl) & IEEE80211_QCTL_TID;
tid = UP2AC(tid);
tid++;
- } else if(IEEE80211_QOS_HAS_SEQ(fc)) { //QoS
+ } else if (IEEE80211_QOS_HAS_SEQ(fc)) { /* QoS */
hdr_3addrqos = (struct rtl_80211_hdr_3addrqos *)header;
tid = le16_to_cpu(hdr_3addrqos->qos_ctl) & IEEE80211_QCTL_TID;
tid = UP2AC(tid);
tid++;
- } else { // no QoS
+ } else { /* no QoS */
tid = 0;
}
@@ -532,7 +541,7 @@ void ieee80211_indicate_packets(struct ieee80211_device *ieee, struct ieee80211_
// IEEE80211_DEBUG(IEEE80211_DL_REORDER,"%s(): hahahahhhh, We indicate packet from reorder list, index is %u\n",__func__,index);
for(j = 0; j<index; j++)
{
-//added by amy for reorder
+/* added by amy for reorder */
struct ieee80211_rxb *prxb = prxbIndicateArray[j];
for(i = 0; i<prxb->nr_subframes; i++) {
struct sk_buff *sub_skb = prxb->subframes[i];
@@ -543,8 +552,10 @@ void ieee80211_indicate_packets(struct ieee80211_device *ieee, struct ieee80211_
((memcmp(sub_skb->data, rfc1042_header, SNAP_SIZE) == 0 &&
ethertype != ETH_P_AARP && ethertype != ETH_P_IPX) ||
memcmp(sub_skb->data, bridge_tunnel_header, SNAP_SIZE) == 0)) {
- /* remove RFC1042 or Bridge-Tunnel encapsulation and
- * replace EtherType */
+ /*
+ * remove RFC1042 or Bridge-Tunnel encapsulation and
+ * replace EtherType
+ */
skb_pull(sub_skb, SNAP_SIZE);
memcpy(skb_push(sub_skb, ETH_ALEN), prxb->src, ETH_ALEN);
memcpy(skb_push(sub_skb, ETH_ALEN), prxb->dst, ETH_ALEN);
@@ -637,7 +648,8 @@ static void RxReorderIndicatePacket(struct ieee80211_device *ieee,
* After Packet dropping and Sliding Window shifting as above, we can now just indicate the packets
* with the SeqNum smaller than latest WinStart and buffer other packets.
*/
- /* For Rx Reorder condition:
+ /*
+ * For Rx Reorder condition:
* 1. All packets with SeqNum smaller than WinStart => Indicate
* 2. All packets with SeqNum larger than or equal to WinStart => Buffer it.
*/
@@ -650,7 +662,7 @@ static void RxReorderIndicatePacket(struct ieee80211_device *ieee,
index = 1;
} else {
/* Current packet is going to be inserted into pending list.*/
- //IEEE80211_DEBUG(IEEE80211_DL_REORDER,"%s(): We RX no ordered packed, insert to ordered list\n",__func__);
+ /* IEEE80211_DEBUG(IEEE80211_DL_REORDER,"%s(): We RX no ordered packed, insert to ordered list\n",__func__); */
if(!list_empty(&ieee->RxReorder_Unused_List)) {
pReorderEntry = list_entry(ieee->RxReorder_Unused_List.next, struct rx_reorder_entry, List);
list_del_init(&pReorderEntry->List);
@@ -728,11 +740,11 @@ static void RxReorderIndicatePacket(struct ieee80211_device *ieee,
/* Handling pending timer. Set this timer to prevent from long time Rx buffering.*/
if (index>0) {
- // Cancel previous pending timer.
+ /* Cancel previous pending timer. */
// del_timer_sync(&pTS->rx_pkt_pending_timer);
pTS->rx_timeout_indicate_seq = 0xffff;
- // Indicate packets
+ /* Indicate packets */
if(index>REORDER_WIN_SIZE){
IEEE80211_DEBUG(IEEE80211_DL_ERR, "RxReorderIndicatePacket(): Rx Reorder buffer full!! \n");
kfree(prxbIndicateArray);
@@ -742,7 +754,7 @@ static void RxReorderIndicatePacket(struct ieee80211_device *ieee,
}
if (bPktInBuf && pTS->rx_timeout_indicate_seq == 0xffff) {
- // Set new pending timer.
+ /* Set new pending timer. */
IEEE80211_DEBUG(IEEE80211_DL_REORDER,"%s(): SET rx timeout timer\n", __func__);
pTS->rx_timeout_indicate_seq = pTS->rx_indicate_seq;
if(timer_pending(&pTS->rx_pkt_pending_timer))
@@ -785,7 +797,7 @@ static u8 parse_subframe(struct sk_buff *skb,
if (rx_stats->bContainHTC) {
LLCOffset += HTCLNG;
}
- // Null packet, don't indicate it to upper layer
+ /* Null packet, don't indicate it to upper layer */
ChkLength = LLCOffset;/* + (Frame_WEP(frame)!=0 ?Adapter->MgntInfo.SecurityInfo.EncryptionHeadOverhead:0);*/
if (skb->len <= ChkLength)
@@ -812,7 +824,7 @@ static u8 parse_subframe(struct sk_buff *skb,
while(skb->len > ETHERNET_HEADER_SIZE) {
/* Offset 12 denote 2 mac address */
nSubframe_Length = *((u16 *)(skb->data + 12));
- //==m==>change the length order
+ /* ==m==>change the length order */
nSubframe_Length = (nSubframe_Length>>8) + (nSubframe_Length<<8);
if (skb->len<(ETHERNET_HEADER_SIZE + nSubframe_Length)) {
@@ -869,9 +881,11 @@ static u8 parse_subframe(struct sk_buff *skb,
}
}
-/* All received frames are sent to this function. @skb contains the frame in
+/*
+ * All received frames are sent to this function. @skb contains the frame in
* IEEE 802.11 format, i.e., in the format it was sent over air.
- * This function is called only as a tasklet (software IRQ). */
+ * This function is called only as a tasklet (software IRQ).
+ */
int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb,
struct ieee80211_rx_stats *rx_stats)
{
@@ -884,12 +898,12 @@ int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb,
struct net_device_stats *stats;
unsigned int frag;
u16 ethertype;
- //added by amy for reorder
+ /* added by amy for reorder */
u8 TID = 0;
u16 SeqNum = 0;
struct rx_ts_record *pTS = NULL;
//bool bIsAggregateFrame = false;
- //added by amy for reorder
+ /* added by amy for reorder */
#ifdef NOT_YET
struct net_device *wds = NULL;
struct net_device *wds = NULL;
@@ -905,7 +919,7 @@ int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb,
int i;
struct ieee80211_rxb *rxb = NULL;
- // cheat the hdr type
+ /* cheat the hdr type */
hdr = (struct rtl_80211_hdr_4addr *)skb->data;
stats = &ieee->stats;
@@ -933,8 +947,10 @@ int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb,
//IEEE80211_DEBUG_DATA(IEEE80211_DL_DATA, skb->data, skb->len);
#ifdef NOT_YET
- /* Put this code here so that we avoid duplicating it in all
- * Rx paths. - Jean II */
+ /*
+ * Put this code here so that we avoid duplicating it in all
+ * Rx paths. - Jean II
+ */
#ifdef IW_WIRELESS_SPY /* defined in iw_handler.h */
/* If spy monitoring on */
if (iface->spy_data.spy_number > 0) {
@@ -964,28 +980,34 @@ int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb,
#ifdef NOT_YET
sta = NULL;
- /* Use station specific key to override default keys if the
+ /*
+ * Use station specific key to override default keys if the
* receiver address is a unicast address ("individual RA"). If
* bcrx_sta_key parameter is set, station specific key is used
* even with broad/multicast targets (this is against IEEE
* 802.11, but makes it easier to use different keys with
- * stations that do not support WEP key mapping). */
+ * stations that do not support WEP key mapping).
+ */
if (!(hdr->addr1[0] & 0x01) || local->bcrx_sta_key)
(void) hostap_handle_sta_crypto(local, hdr, &crypt,
&sta);
#endif
- /* allow NULL decrypt to indicate an station specific override
- * for default encryption */
+ /*
+ * allow NULL decrypt to indicate an station specific override
+ * for default encryption
+ */
if (crypt && (!crypt->ops || !crypt->ops->decrypt_mpdu))
crypt = NULL;
if (!crypt && (fc & IEEE80211_FCTL_WEP)) {
- /* This seems to be triggered by some (multicast?)
+ /*
+ * This seems to be triggered by some (multicast?)
* frames from other than current BSS, so just drop the
* frames silently instead of filling system log with
- * these reports. */
+ * these reports.
+ */
IEEE80211_DEBUG_DROP("Decryption failed (not set)"
" (SA=%pM)\n",
hdr->addr2);
@@ -997,7 +1019,7 @@ int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb,
if (skb->len < IEEE80211_DATA_HDR3_LEN)
goto rx_dropped;
- // if QoS enabled, should check the sequence for each of the AC
+ /* if QoS enabled, should check the sequence for each of the AC */
if ((!ieee->pHTInfo->bCurRxReorderEnable) || !ieee->current_network.qos_data.active|| !IsDataFrame(skb->data) || IsLegacyDataFrame(skb->data)) {
if (is_duplicate_packet(ieee, hdr))
goto rx_dropped;
@@ -1104,13 +1126,15 @@ int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb,
}
#endif
//IEEE80211_DEBUG_DATA(IEEE80211_DL_DATA, skb->data, skb->len);
- /* Nullfunc frames may have PS-bit set, so they must be passed to
- * hostap_handle_sta_rx() before being dropped here. */
+ /*
+ * Nullfunc frames may have PS-bit set, so they must be passed to
+ * hostap_handle_sta_rx() before being dropped here.
+ */
if (stype != IEEE80211_STYPE_DATA &&
stype != IEEE80211_STYPE_DATA_CFACK &&
stype != IEEE80211_STYPE_DATA_CFPOLL &&
stype != IEEE80211_STYPE_DATA_CFACKPOLL&&
- stype != IEEE80211_STYPE_QOS_DATA//add by David,2006.8.4
+ stype != IEEE80211_STYPE_QOS_DATA/* add by David,2006.8.4 */
) {
if (stype != IEEE80211_STYPE_NULLFUNC)
IEEE80211_DEBUG_DROP(
@@ -1136,7 +1160,7 @@ int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb,
hdr = (struct rtl_80211_hdr_4addr *) skb->data;
/* skb: hdr + (possibly fragmented) plaintext payload */
- // PR: FIXME: hostap has additional conditions in the "if" below:
+ /* PR: FIXME: hostap has additional conditions in the "if" below: */
// ieee->host_decrypt && (fc & IEEE80211_FCTL_WEP) &&
if ((frag != 0 || (fc & IEEE80211_FCTL_MOREFRAGS))) {
int flen;
@@ -1164,33 +1188,43 @@ int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb,
}
if (frag == 0) {
- /* copy first fragment (including full headers) into
- * beginning of the fragment cache skb */
+ /*
+ * copy first fragment (including full headers) into
+ * beginning of the fragment cache skb
+ */
skb_put_data(frag_skb, skb->data, flen);
} else {
- /* append frame payload to the end of the fragment
- * cache skb */
+ /*
+ * append frame payload to the end of the fragment
+ * cache skb
+ */
skb_put_data(frag_skb, skb->data + hdrlen, flen);
}
dev_kfree_skb_any(skb);
skb = NULL;
if (fc & IEEE80211_FCTL_MOREFRAGS) {
- /* more fragments expected - leave the skb in fragment
+ /*
+ * more fragments expected - leave the skb in fragment
* cache for now; it will be delivered to upper layers
- * after all fragments have been received */
+ * after all fragments have been received
+ */
goto rx_exit;
}
- /* this was the last fragment and the frame will be
- * delivered, so remove skb from fragment cache */
+ /*
+ * this was the last fragment and the frame will be
+ * delivered, so remove skb from fragment cache
+ */
skb = frag_skb;
hdr = (struct rtl_80211_hdr_4addr *) skb->data;
ieee80211_frag_cache_invalidate(ieee, hdr);
}
- /* skb: hdr + (possible reassembled) full MSDU payload; possibly still
- * encrypted/authenticated */
+ /*
+ * skb: hdr + (possible reassembled) full MSDU payload; possibly still
+ * encrypted/authenticated
+ */
if (ieee->host_decrypt && (fc & IEEE80211_FCTL_WEP) &&
ieee80211_rx_frame_decrypt_msdu(ieee, skb, keyidx, crypt))
{
@@ -1198,7 +1232,7 @@ int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb,
goto rx_dropped;
}
- //added by amy for AP roaming
+ /* added by amy for AP roaming */
ieee->LinkDetectInfo.NumRecvDataInPeriod++;
ieee->LinkDetectInfo.NumRxOkInPeriod++;
@@ -1208,8 +1242,10 @@ int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb,
ieee80211_is_eapol_frame(ieee, skb, hdrlen)) {
#ifdef CONFIG_IEEE80211_DEBUG
- /* pass unencrypted EAPOL frames even if encryption is
- * configured */
+ /*
+ * pass unencrypted EAPOL frames even if encryption is
+ * configured
+ */
struct eapol *eap = (struct eapol *)(skb->data +
24);
IEEE80211_DEBUG_EAP("RX: IEEE 802.1X EAPOL frame: %s\n",
@@ -1248,7 +1284,7 @@ int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb,
printk(KERN_WARNING "RX: IEEE802.1X EPAOL frame!\n");
}
*/
-//added by amy for reorder
+/* added by amy for reorder */
if (ieee->current_network.qos_data.active && IsQoSDataFrame(skb->data)
&& !is_multicast_ether_addr(hdr->addr1))
{
@@ -1260,7 +1296,7 @@ int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb,
ieee->bis_any_nonbepkts = true;
}
}
-//added by amy for reorder
+/* added by amy for reorder */
/* skb: hdr + (possible reassembled) full plaintext payload */
//ethertype = (payload[6] << 8) | payload[7];
rxb = kmalloc(sizeof(struct ieee80211_rxb), GFP_ATOMIC);
@@ -1278,9 +1314,9 @@ int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb,
goto rx_dropped;
}
-//added by amy for reorder
+/* added by amy for reorder */
if (!ieee->pHTInfo->bCurRxReorderEnable || !pTS) {
-//added by amy for reorder
+/* added by amy for reorder */
for(i = 0; i<rxb->nr_subframes; i++) {
struct sk_buff *sub_skb = rxb->subframes[i];
@@ -1291,8 +1327,10 @@ int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb,
((memcmp(sub_skb->data, rfc1042_header, SNAP_SIZE) == 0 &&
ethertype != ETH_P_AARP && ethertype != ETH_P_IPX) ||
memcmp(sub_skb->data, bridge_tunnel_header, SNAP_SIZE) == 0)) {
- /* remove RFC1042 or Bridge-Tunnel encapsulation and
- * replace EtherType */
+ /*
+ * remove RFC1042 or Bridge-Tunnel encapsulation and
+ * replace EtherType
+ */
skb_pull(sub_skb, SNAP_SIZE);
memcpy(skb_push(sub_skb, ETH_ALEN), src, ETH_ALEN);
memcpy(skb_push(sub_skb, ETH_ALEN), dst, ETH_ALEN);
@@ -1346,9 +1384,11 @@ int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb,
rxb = NULL;
stats->rx_dropped++;
- /* Returning 0 indicates to caller that we have not handled the SKB--
+ /*
+ * Returning 0 indicates to caller that we have not handled the SKB--
* so it is still allocated and can be used again by underlying
- * hardware as a DMA target */
+ * hardware as a DMA target
+ */
return 0;
}
EXPORT_SYMBOL(ieee80211_rx);
@@ -1574,11 +1614,11 @@ static inline void ieee80211_extract_country_ie(
}
}
- //
- // 070305, rcnjko: I update country IE watch dog here because
- // some AP (e.g. Cisco 1242) don't include country IE in their
- // probe response frame.
- //
+ /*
+ * 070305, rcnjko: I update country IE watch dog here because
+ * some AP (e.g. Cisco 1242) don't include country IE in their
+ * probe response frame.
+ */
if (IS_EQUAL_CIE_SRC(ieee, addr2) )
{
UPDATE_CIE_WATCHDOG(ieee);
@@ -1613,9 +1653,11 @@ int ieee80211_parse_info_param(struct ieee80211_device *ieee,
info_element->len +
sizeof(*info_element),
length, info_element->id);
- /* We stop processing but don't return an error here
+ /*
+ * We stop processing but don't return an error here
* because some misbehaviour APs break this rule. ie.
- * Orinoco AP1000. */
+ * Orinoco AP1000.
+ */
break;
}
@@ -1789,7 +1831,7 @@ int ieee80211_parse_info_param(struct ieee80211_device *ieee,
}
#endif
- //for HTcap and HTinfo parameters
+ /* for HTcap and HTinfo parameters */
if(tmp_htcap_len == 0){
if(info_element->len >= 4 &&
info_element->data[0] == 0x00 &&
@@ -1883,7 +1925,7 @@ int ieee80211_parse_info_param(struct ieee80211_device *ieee,
}
else
network->ralink_cap_exist = false;
- //added by amy for atheros AP
+ /* added by amy for atheros AP */
if((info_element->len >= 3 &&
info_element->data[0] == 0x00 &&
info_element->data[1] == 0x03 &&
@@ -1908,7 +1950,7 @@ int ieee80211_parse_info_param(struct ieee80211_device *ieee,
}
else
network->cisco_cap_exist = false;
- //added by amy for LEAP of cisco
+ /* added by amy for LEAP of cisco */
if (info_element->len > 4 &&
info_element->data[0] == 0x00 &&
info_element->data[1] == 0x40 &&
@@ -1924,9 +1966,9 @@ int ieee80211_parse_info_param(struct ieee80211_device *ieee,
}
else
network->bCcxRmEnable = false;
- //
- // CCXv4 Table 59-1 MBSSID Masks.
- //
+ /*
+ * CCXv4 Table 59-1 MBSSID Masks.
+ */
network->MBssidMask = network->CcxRmState[1] & 0x07;
if(network->MBssidMask != 0)
{
@@ -1973,7 +2015,7 @@ int ieee80211_parse_info_param(struct ieee80211_device *ieee,
network->rsn_ie_len);
break;
- //HT related element.
+ /* HT related element. */
case MFIE_TYPE_HT_CAP:
IEEE80211_DEBUG_SCAN("MFIE_TYPE_HT_CAP: %d bytes\n",
info_element->len);
@@ -1984,9 +2026,11 @@ int ieee80211_parse_info_param(struct ieee80211_device *ieee,
sizeof(network->bssht.bdHTCapBuf):tmp_htcap_len;
memcpy(network->bssht.bdHTCapBuf,info_element->data,network->bssht.bdHTCapLen);
- //If peer is HT, but not WMM, call QosSetLegacyWMMParamWithHT()
- // windows driver will update WMM parameters each beacon received once connected
- // Linux driver is a bit different.
+ /*
+ * If peer is HT, but not WMM, call QosSetLegacyWMMParamWithHT()
+ * windows driver will update WMM parameters each beacon received once connected
+ * Linux driver is a bit different.
+ */
network->bssht.bdSupportHT = true;
}
else
@@ -2013,9 +2057,11 @@ int ieee80211_parse_info_param(struct ieee80211_device *ieee,
{
network->bWithAironetIE = true;
- // CCX 1 spec v1.13, A01.1 CKIP Negotiation (page23):
- // "A Cisco access point advertises support for CKIP in beacon and probe response packets,
- // by adding an Aironet element and setting one or both of the CKIP negotiation bits."
+ /*
+ * CCX 1 spec v1.13, A01.1 CKIP Negotiation (page23):
+ * "A Cisco access point advertises support for CKIP in beacon and probe response packets,
+ * by adding an Aironet element and setting one or both of the CKIP negotiation bits."
+ */
if( (info_element->data[IE_CISCO_FLAG_POSITION]&SUPPORT_CKIP_MIC) ||
(info_element->data[IE_CISCO_FLAG_POSITION]&SUPPORT_CKIP_PK) )
{
@@ -2040,7 +2086,7 @@ int ieee80211_parse_info_param(struct ieee80211_device *ieee,
case MFIE_TYPE_COUNTRY:
IEEE80211_DEBUG_SCAN("MFIE_TYPE_COUNTRY: %d bytes\n",
info_element->len);
- ieee80211_extract_country_ie(ieee, info_element, network, network->bssid);//addr2 is same as addr3 when from an AP
+ ieee80211_extract_country_ie(ieee, info_element, network, network->bssid);/* addr2 is same as addr3 when from an AP */
break;
/* TODO */
default:
@@ -2075,7 +2121,7 @@ static inline u8 ieee80211_SignalStrengthTranslate(
{
u8 RetSS;
- // Step 1. Scale mapping.
+ /* Step 1. Scale mapping. */
if(CurrSS >= 71 && CurrSS <= 100)
{
RetSS = 90 + ((CurrSS - 70) / 3);
@@ -2118,7 +2164,7 @@ static inline u8 ieee80211_SignalStrengthTranslate(
}
//RT_TRACE(COMP_DBG, DBG_LOUD, ("##### After Mapping: LastSS: %d, CurrSS: %d, RetSS: %d\n", LastSS, CurrSS, RetSS));
- // Step 2. Smoothing.
+ /* Step 2. Smoothing. */
//RT_TRACE(COMP_DBG, DBG_LOUD, ("$$$$$ After Smoothing: LastSS: %d, CurrSS: %d, RetSS: %d\n", LastSS, CurrSS, RetSS));
@@ -2128,9 +2174,9 @@ static inline u8 ieee80211_SignalStrengthTranslate(
/* 0-100 index */
static long ieee80211_translate_todbm(u8 signal_strength_index)
{
- long signal_power; // in dBm.
+ long signal_power; /* in dBm. */
- // Translate to dBm (x=0.5y-95).
+ /* Translate to dBm (x=0.5y-95). */
signal_power = (long)((signal_strength_index + 1) >> 1);
signal_power -= 95;
@@ -2180,7 +2226,7 @@ static inline int ieee80211_network_init(
#endif
network->CountryIeLen = 0;
memset(network->CountryIeBuf, 0, MAX_IE_LEN);
-//Initialize HT parameters
+/* Initialize HT parameters */
//ieee80211_ht_initialize(&network->bssht);
HTInitializeBssDesc(&network->bssht);
if (stats->freq == IEEE80211_52GHZ_BAND) {
@@ -2236,10 +2282,12 @@ static inline int ieee80211_network_init(
static inline int is_same_network(struct ieee80211_network *src,
struct ieee80211_network *dst, struct ieee80211_device *ieee)
{
- /* A network is only a duplicate if the channel, BSSID, ESSID
+ /*
+ * A network is only a duplicate if the channel, BSSID, ESSID
* and the capability field (in particular IBSS and BSS) all match.
* We treat all <hidden> with the same BSSID and channel
- * as one network */
+ * as one network
+ */
return //((src->ssid_len == dst->ssid_len) &&
(((src->ssid_len == dst->ssid_len) || (ieee->iw_mode == IW_MODE_INFRA)) &&
(src->channel == dst->channel) &&
@@ -2334,7 +2382,7 @@ static inline void update_network(struct ieee80211_network *dst,
dst->qos_data.old_param_count = old_param;
/* dst->last_associate is not overwritten */
- dst->wmm_info = src->wmm_info; //sure to exist in beacon or probe response frame.
+ dst->wmm_info = src->wmm_info; /* sure to exist in beacon or probe response frame. */
if (src->wmm_param[0].aci_aifsn|| \
src->wmm_param[1].aci_aifsn|| \
src->wmm_param[2].aci_aifsn|| \
@@ -2349,7 +2397,7 @@ static inline void update_network(struct ieee80211_network *dst,
dst->CountryIeLen = src->CountryIeLen;
memcpy(dst->CountryIeBuf, src->CountryIeBuf, src->CountryIeLen);
- //added by amy for LEAP
+ /* added by amy for LEAP */
dst->bWithAironetIE = src->bWithAironetIE;
dst->bCkipSupported = src->bCkipSupported;
memcpy(dst->CcxRmState, src->CcxRmState, 2);
@@ -2420,12 +2468,14 @@ static inline void ieee80211_process_probe_response(
goto out;
}
- // For Asus EeePc request,
- // (1) if wireless adapter receive get any 802.11d country code in AP beacon,
- // wireless adapter should follow the country code.
- // (2) If there is no any country code in beacon,
- // then wireless adapter should do active scan from ch1~11 and
- // passive scan from ch12~14
+ /*
+ * For Asus EeePc request,
+ * (1) if wireless adapter receive get any 802.11d country code in AP beacon,
+ * wireless adapter should follow the country code.
+ * (2) If there is no any country code in beacon,
+ * then wireless adapter should do active scan from ch1~11 and
+ * passive scan from ch12~14
+ */
if (!is_legal_channel(ieee, network->channel))
goto out;
@@ -2433,7 +2483,7 @@ static inline void ieee80211_process_probe_response(
{
if (fc == IEEE80211_STYPE_PROBE_RESP)
{
- // Case 1: Country code
+ /* Case 1: Country code */
if(IS_COUNTRY_IE_VALID(ieee) )
{
if (!is_legal_channel(ieee, network->channel)) {
@@ -2441,10 +2491,10 @@ static inline void ieee80211_process_probe_response(
goto out;
}
}
- // Case 2: No any country code.
+ /* Case 2: No any country code. */
else
{
- // Filter over channel ch12~14
+ /* Filter over channel ch12~14 */
if (network->channel > 11)
{
printk("GetScanInfo(): For Global Domain, filter probe response at channel(%d).\n", network->channel);
@@ -2454,7 +2504,7 @@ static inline void ieee80211_process_probe_response(
}
else
{
- // Case 1: Country code
+ /* Case 1: Country code */
if(IS_COUNTRY_IE_VALID(ieee) )
{
if (!is_legal_channel(ieee, network->channel)) {
@@ -2462,10 +2512,10 @@ static inline void ieee80211_process_probe_response(
goto out;
}
}
- // Case 2: No any country code.
+ /* Case 2: No any country code. */
else
{
- // Filter over channel ch12~14
+ /* Filter over channel ch12~14 */
if (network->channel > 14)
{
printk("GetScanInfo(): For Global Domain, filter beacon at channel(%d).\n",network->channel);
@@ -2475,15 +2525,19 @@ static inline void ieee80211_process_probe_response(
}
}
- /* The network parsed correctly -- so now we scan our known networks
+ /*
+ * The network parsed correctly -- so now we scan our known networks
* to see if we can find it in our list.
*
* NOTE: This search is definitely not optimized. Once its doing
* the "right thing" we'll optimize it for efficiency if
- * necessary */
+ * necessary
+ */
- /* Search for this entry in the list and update it if it is
- * already there. */
+ /*
+ * Search for this entry in the list and update it if it is
+ * already there.
+ */
spin_lock_irqsave(&ieee->lock, flags);
@@ -2500,8 +2554,7 @@ static inline void ieee80211_process_probe_response(
{
if(ieee->state == IEEE80211_LINKED)
ieee->LinkDetectInfo.NumRecvBcnInPeriod++;
- }
- else //hidden AP
+ } else /* hidden AP */
network->flags = (~NETWORK_EMPTY_ESSID & network->flags)|(NETWORK_EMPTY_ESSID & ieee->current_network.flags);
}
@@ -2513,8 +2566,10 @@ static inline void ieee80211_process_probe_response(
oldest = target;
}
- /* If we didn't find a match, then get a new network slot to initialize
- * with this beacon's information */
+ /*
+ * If we didn't find a match, then get a new network slot to initialize
+ * with this beacon's information
+ */
if (&target->list == &ieee->network_list) {
if (list_empty(&ieee->network_free_list)) {
/* If there are no more slots, expire the oldest */
@@ -2553,12 +2608,13 @@ static inline void ieee80211_process_probe_response(
fc == IEEE80211_STYPE_PROBE_RESP ?
"PROBE RESPONSE" : "BEACON");
- /* we have an entry and we are going to update it. But this entry may
+ /*
+ * we have an entry and we are going to update it. But this entry may
* be already expired. In this case we do the same as we found a new
* net and call the new_net handler
*/
renew = !time_after(target->last_scanned + ieee->scan_age, jiffies);
- //YJ,add,080819,for hidden ap
+ /* YJ,add,080819,for hidden ap */
if(is_beacon(beacon->header.frame_ctl) == 0)
network->flags = (~NETWORK_EMPTY_ESSID & network->flags)|(NETWORK_EMPTY_ESSID & target->flags);
//if(strncmp(network->ssid, "linksys-c",9) == 0)
@@ -2567,7 +2623,7 @@ static inline void ieee80211_process_probe_response(
&& (((network->ssid_len > 0) && (strncmp(target->ssid, network->ssid, network->ssid_len)))\
||((ieee->current_network.ssid_len == network->ssid_len)&&(strncmp(ieee->current_network.ssid, network->ssid, network->ssid_len) == 0)&&(ieee->state == IEEE80211_NOLINK))))
renew = 1;
- //YJ,add,080819,for hidden ap,end
+ /* YJ,add,080819,for hidden ap,end */
update_network(target, network);
if(renew && (ieee->softmac_features & IEEE_SOFTMAC_ASSOCIATE))
diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c b/drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c
index 944c8894f9ff..27e81a1de51e 100644
--- a/drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c
+++ b/drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c
@@ -33,7 +33,8 @@ short ieee80211_is_shortslot(const struct ieee80211_network *net)
}
EXPORT_SYMBOL(ieee80211_is_shortslot);
-/* returns the total length needed for pleacing the RATE MFIE
+/*
+ * returns the total length needed for pleacing the RATE MFIE
* tag and the EXTENDED RATE MFIE tag if needed.
* It encludes two bytes per tag for the tag itself and its len
*/
@@ -50,7 +51,8 @@ static unsigned int ieee80211_MFIE_rate_len(struct ieee80211_device *ieee)
return rate_len;
}
-/* pleace the MFIE rate, tag to the memory (double) poined.
+/*
+ * pleace the MFIE rate, tag to the memory (double) poined.
* Then it updates the pointer so that
* it points after the new MFIE tag added.
*/
@@ -263,9 +265,10 @@ inline void softmac_mgmt_xmit(struct sk_buff *skb, struct ieee80211_device *ieee
(skb_queue_len(&ieee->skb_waitQ[tcb_desc->queue_index]) != 0) || \
(ieee->queue_stop)) {
/* insert the skb packet to the management queue */
- /* as for the completion function, it does not need
+ /*
+ * as for the completion function, it does not need
* to check it any more.
- * */
+ */
printk("%s():insert to waitqueue!\n", __func__);
skb_queue_tail(&ieee->skb_waitQ[tcb_desc->queue_index], skb);
} else {
@@ -405,7 +408,8 @@ static void ieee80211_send_probe_requests(struct ieee80211_device *ieee)
}
}
-/* this performs syncro scan blocking the caller until all channels
+/*
+ * this performs syncro scan blocking the caller until all channels
* in the allowed channel map has been checked.
*/
void ieee80211_softmac_scan_syncro(struct ieee80211_device *ieee)
@@ -423,7 +427,8 @@ void ieee80211_softmac_scan_syncro(struct ieee80211_device *ieee)
goto out; /* scan completed */
} while (!channel_map[ch]);
- /* this function can be called in two situations
+ /*
+ * this function can be called in two situations
* 1- We have switched to ad-hoc mode and we are
* performing a complete syncro scan before conclude
* there are no interesting cell and to create a
@@ -448,7 +453,8 @@ void ieee80211_softmac_scan_syncro(struct ieee80211_device *ieee)
if (channel_map[ch] == 1)
ieee80211_send_probe_requests(ieee);
- /* this prevent excessive time wait when we
+ /*
+ * this prevent excessive time wait when we
* need to wait for a syncro scan to end..
*/
if (ieee->state >= IEEE80211_LINKED && ieee->sync_scan_hurryup)
@@ -712,7 +718,7 @@ static struct sk_buff *ieee80211_probe_resp(struct ieee80211_device *ieee, u8 *d
// printk("===============>tmp_ht_cap_len is %d,tmp_ht_info_len is %d, tmp_generic_ie_len is %d\n",tmp_ht_cap_len,tmp_ht_info_len,tmp_generic_ie_len);
beacon_size = sizeof(struct ieee80211_probe_response) + 2
+ ssid_len
- + 3 //channel
+ + 3 /* channel */
+ rate_len
+ rate_ex_len
+ atim_len
@@ -789,7 +795,7 @@ static struct sk_buff *ieee80211_probe_resp(struct ieee80211_device *ieee, u8 *d
if (wpa_ie_len) {
if (ieee->iw_mode == IW_MODE_ADHOC) {
- //as Windows will set pairwise key same as the group key which is not allowed in Linux, so set this for IOT issue. WB 2008.07.07
+ /* as Windows will set pairwise key same as the group key which is not allowed in Linux, so set this for IOT issue. WB 2008.07.07 */
memcpy(&ieee->wpa_ie[14], &ieee->wpa_ie[8], 4);
}
memcpy(tag, ieee->wpa_ie, ieee->wpa_ie_len);
@@ -946,7 +952,7 @@ ieee80211_association_req(struct ieee80211_network *beacon,
//u16 suite_count = 0;
//u8 suit_select = 0;
//unsigned int wpa_len = beacon->wpa_ie_len;
- //for HT
+ /* for HT */
u8 *ht_cap_buf = NULL;
u8 ht_cap_len = 0;
u8 *realtek_ie_buf = NULL;
@@ -1033,18 +1039,18 @@ ieee80211_association_req(struct ieee80211_network *beacon,
memcpy(hdr->header.addr2, ieee->dev->dev_addr, ETH_ALEN);
memcpy(hdr->header.addr3, beacon->bssid, ETH_ALEN);
- memcpy(ieee->ap_mac_addr, beacon->bssid, ETH_ALEN);//for HW security, John
+ memcpy(ieee->ap_mac_addr, beacon->bssid, ETH_ALEN);/* for HW security, John */
hdr->capability = cpu_to_le16(WLAN_CAPABILITY_BSS);
if (beacon->capability & WLAN_CAPABILITY_PRIVACY)
hdr->capability |= cpu_to_le16(WLAN_CAPABILITY_PRIVACY);
if (beacon->capability & WLAN_CAPABILITY_SHORT_PREAMBLE)
- hdr->capability |= cpu_to_le16(WLAN_CAPABILITY_SHORT_PREAMBLE); //add short_preamble here
+ hdr->capability |= cpu_to_le16(WLAN_CAPABILITY_SHORT_PREAMBLE); /* add short_preamble here */
if (ieee->short_slot)
hdr->capability |= cpu_to_le16(WLAN_CAPABILITY_SHORT_SLOT);
- if (wmm_info_len) //QOS
+ if (wmm_info_len) /* QOS */
hdr->capability |= cpu_to_le16(WLAN_CAPABILITY_QOS);
hdr->listen_interval = cpu_to_le16(0xa);
@@ -1058,24 +1064,26 @@ ieee80211_association_req(struct ieee80211_network *beacon,
ieee80211_MFIE_Brate(ieee, &tag);
ieee80211_MFIE_Grate(ieee, &tag);
- // For CCX 1 S13, CKIP. Added by Annie, 2006-08-14.
+ /* For CCX 1 S13, CKIP. Added by Annie, 2006-08-14. */
if (beacon->bCkipSupported) {
- static u8 AironetIeOui[] = {0x00, 0x01, 0x66}; // "4500-client"
+ static u8 AironetIeOui[] = {0x00, 0x01, 0x66}; /* "4500-client" */
u8 CcxAironetBuf[30];
struct octet_string osCcxAironetIE;
memset(CcxAironetBuf, 0, 30);
osCcxAironetIE.octet = CcxAironetBuf;
osCcxAironetIE.length = sizeof(CcxAironetBuf);
- //
- // Ref. CCX test plan v3.61, 3.2.3.1 step 13.
- // We want to make the device type as "4500-client". 060926, by CCW.
- //
+ /*
+ * Ref. CCX test plan v3.61, 3.2.3.1 step 13.
+ * We want to make the device type as "4500-client". 060926, by CCW.
+ */
memcpy(osCcxAironetIE.octet, AironetIeOui, sizeof(AironetIeOui));
- // CCX1 spec V1.13, A01.1 CKIP Negotiation (page23):
- // "The CKIP negotiation is started with the associate request from the client to the access point,
- // containing an Aironet element with both the MIC and KP bits set."
+ /*
+ * CCX1 spec V1.13, A01.1 CKIP Negotiation (page23):
+ * "The CKIP negotiation is started with the associate request from the client to the access point,
+ * containing an Aironet element with both the MIC and KP bits set."
+ */
osCcxAironetIE.octet[IE_CISCO_FLAG_POSITION] |= (SUPPORT_CKIP_PK | SUPPORT_CKIP_MIC);
tag = skb_put(skb, ckip_ie_len);
*tag++ = MFIE_TYPE_AIRONET;
@@ -1109,7 +1117,7 @@ ieee80211_association_req(struct ieee80211_network *beacon,
memcpy(tag, osCcxVerNum.octet, osCcxVerNum.length);
tag += osCcxVerNum.length;
}
- //HT cap element
+ /* HT cap element */
if (ieee->pHTInfo->bCurrentHTSupport && ieee->pHTInfo->bEnableHT) {
if (ieee->pHTInfo->ePeerHTSpecVer != HT_SPEC_VER_EWC) {
tag = skb_put(skb, ht_cap_len);
@@ -1120,7 +1128,7 @@ ieee80211_association_req(struct ieee80211_network *beacon,
}
}
- //choose what wpa_supplicant gives to associate.
+ /* choose what wpa_supplicant gives to associate. */
if (wpa_ie_len)
skb_put_data(skb, ieee->wpa_ie, wpa_ie_len);
@@ -1163,7 +1171,8 @@ void ieee80211_associate_abort(struct ieee80211_device *ieee)
ieee->associate_seq++;
- /* don't scan, and avoid to have the RX path possibily
+ /*
+ * don't scan, and avoid to have the RX path possibily
* try again to associate. Even do not react to AUTH or
* ASSOC response. Just wait for the retry wq to be scheduled.
* Here we will check if there are good nets to associate
@@ -1208,7 +1217,7 @@ static void ieee80211_associate_step1(struct ieee80211_device *ieee)
ieee->state = IEEE80211_ASSOCIATING_AUTHENTICATING;
IEEE80211_DEBUG_MGMT("Sending authentication request\n");
softmac_mgmt_xmit(skb, ieee);
- //BUGON when you try to add_timer twice, using mod_timer may be better, john0709
+ /* BUGON when you try to add_timer twice, using mod_timer may be better, john0709 */
if (!timer_pending(&ieee->associate_timer)) {
ieee->associate_timer.expires = jiffies + (HZ / 2);
add_timer(&ieee->associate_timer);
@@ -1289,7 +1298,7 @@ static void ieee80211_associate_complete_wq(struct work_struct *work)
//HTSetConnectBwMode(ieee, HT_CHANNEL_WIDTH_20, HT_EXTCHNL_OFFSET_NO_EXT);
}
ieee->LinkDetectInfo.SlotNum = 2 * (1 + ieee->current_network.beacon_interval / 500);
- // To prevent the immediately calling watch_dog after association.
+ /* To prevent the immediately calling watch_dog after association. */
if (ieee->LinkDetectInfo.NumRecvBcnInPeriod == 0 || ieee->LinkDetectInfo.NumRecvDataInPeriod == 0) {
ieee->LinkDetectInfo.NumRecvBcnInPeriod = 1;
ieee->LinkDetectInfo.NumRecvDataInPeriod = 1;
@@ -1346,7 +1355,8 @@ inline void ieee80211_softmac_new_net(struct ieee80211_device *ieee, struct ieee
short apset, ssidset, ssidbroad, apmatch, ssidmatch;
- /* we are interested in new new only if we are not associated
+ /*
+ * we are interested in new new only if we are not associated
* and we are not associating / authenticating
*/
if (ieee->state != IEEE80211_NOLINK)
@@ -1359,7 +1369,8 @@ inline void ieee80211_softmac_new_net(struct ieee80211_device *ieee, struct ieee
return;
if (ieee->iw_mode == IW_MODE_INFRA || ieee->iw_mode == IW_MODE_ADHOC) {
- /* if the user specified the AP MAC, we need also the essid
+ /*
+ * if the user specified the AP MAC, we need also the essid
* This could be obtained by beacons or, if the network does not
* broadcast it, it can be put manually.
*/
@@ -1370,18 +1381,21 @@ inline void ieee80211_softmac_new_net(struct ieee80211_device *ieee, struct ieee
ssidmatch = (ieee->current_network.ssid_len == net->ssid_len) &&
(!strncmp(ieee->current_network.ssid, net->ssid, net->ssid_len));
- /* if the user set the AP check if match.
+ /*
+ * if the user set the AP check if match.
* if the network does not broadcast essid we check the user supplyed ANY essid
* if the network does broadcast and the user does not set essid it is OK
* if the network does broadcast and the user did set essid chech if essid match
*/
if ((apset && apmatch &&
((ssidset && ssidbroad && ssidmatch) || (ssidbroad && !ssidset) || (!ssidbroad && ssidset))) ||
- /* if the ap is not set, check that the user set the bssid
+ /*
+ * if the ap is not set, check that the user set the bssid
* and the network does broadcast and that those two bssid matches
*/
(!apset && ssidset && ssidbroad && ssidmatch)) {
- /* if the essid is hidden replace it with the
+ /*
+ * if the essid is hidden replace it with the
* essid provided by the user.
*/
if (!ssidbroad) {
@@ -1404,7 +1418,7 @@ inline void ieee80211_softmac_new_net(struct ieee80211_device *ieee, struct ieee
if (ieee->iw_mode == IW_MODE_INFRA) {
/* Join the network for the first time */
ieee->AsocRetryCount = 0;
- //for HT by amy 080514
+ /* for HT by amy 080514 */
if ((ieee->current_network.qos_data.supported == 1) &&
// (ieee->pHTInfo->bEnableHT && ieee->current_network.bssht.bdSupportHT))
ieee->current_network.bssht.bdSupportHT) {
@@ -1444,7 +1458,8 @@ void ieee80211_softmac_check_all_nets(struct ieee80211_device *ieee)
spin_lock_irqsave(&ieee->lock, flags);
list_for_each_entry(target, &ieee->network_list, list) {
- /* if the state become different that NOLINK means
+ /*
+ * if the state become different that NOLINK means
* we had found what we are searching for
*/
@@ -1624,7 +1639,7 @@ ieee80211_rx_assoc_rq(struct ieee80211_device *ieee, struct sk_buff *skb)
ieee80211_resp_to_assoc_rq(ieee, dest);
printk(KERN_INFO"New client associated: %pM\n", dest);
- //FIXME
+ /* FIXME */
}
static void ieee80211_sta_ps_send_null_frame(struct ieee80211_device *ieee,
@@ -1651,7 +1666,7 @@ static short ieee80211_sta_ps_sleep(struct ieee80211_device *ieee, u32 *time_h,
dtim = ieee->current_network.dtim_data;
if (!(dtim & IEEE80211_DTIM_VALID))
return 0;
- timeout = ieee->current_network.beacon_interval; //should we use ps_timeout value or beacon_interval
+ timeout = ieee->current_network.beacon_interval; /* should we use ps_timeout value or beacon_interval */
ieee->current_network.dtim_data = IEEE80211_DTIM_INVALID;
if (dtim & ((IEEE80211_DTIM_UCAST | IEEE80211_DTIM_MBCAST) & ieee->ps))
@@ -1696,7 +1711,7 @@ static inline void ieee80211_sta_ps(struct ieee80211_device *ieee)
if ((ieee->ps == IEEE80211_PS_DISABLED ||
ieee->iw_mode != IW_MODE_INFRA ||
ieee->state != IEEE80211_LINKED)) {
- // #warning CHECK_LOCK_HERE
+ /* #warning CHECK_LOCK_HERE */
spin_lock_irqsave(&ieee->mgmt_tx_lock, flags2);
ieee80211_sta_wakeup(ieee, 1);
@@ -1729,7 +1744,7 @@ static inline void ieee80211_sta_ps(struct ieee80211_device *ieee)
spin_unlock_irqrestore(&ieee->mgmt_tx_lock, flags2);
}
} else if (sleep == 2) {
-//#warning CHECK_LOCK_HERE
+/* #warning CHECK_LOCK_HERE */
spin_lock_irqsave(&ieee->mgmt_tx_lock, flags2);
ieee80211_sta_wakeup(ieee, 1);
@@ -1774,7 +1789,8 @@ void ieee80211_ps_tx_ack(struct ieee80211_device *ieee, short success)
ieee->sta_sleep = 1;
ieee->enter_sleep_state(ieee->dev, ieee->ps_th, ieee->ps_tl);
}
- /* if the card report not success we can't be sure the AP
+ /*
+ * if the card report not success we can't be sure the AP
* has not RXed so we can't assume the AP believe us awake
*/
} else {
@@ -1925,7 +1941,7 @@ ieee80211_rx_frame_softmac(struct ieee80211_device *ieee, struct sk_buff *skb,
network, rx_stats)) {
return 1;
} else {
- //filling the PeerHTCap. //maybe not necessary as we can get its info from current_network.
+ /* filling the PeerHTCap. maybe not necessary as we can get its info from current_network. */
memcpy(ieee->pHTInfo->PeerHTCapBuf, network->bssht.bdHTCapBuf, network->bssht.bdHTCapLen);
memcpy(ieee->pHTInfo->PeerHTInfoBuf, network->bssht.bdHTInfoBuf, network->bssht.bdHTInfoLen);
}
@@ -1978,9 +1994,10 @@ ieee80211_rx_frame_softmac(struct ieee80211_device *ieee, struct sk_buff *skb,
case IEEE80211_STYPE_DISASSOC:
case IEEE80211_STYPE_DEAUTH:
- /* FIXME for now repeat all the association procedure
- * both for disassociation and deauthentication
- */
+ /*
+ * FIXME for now repeat all the association procedure
+ * both for disassociation and deauthentication
+ */
if ((ieee->softmac_features & IEEE_SOFTMAC_ASSOCIATE) &&
ieee->state == IEEE80211_LINKED &&
ieee->iw_mode == IW_MODE_INFRA) {
@@ -2004,7 +2021,8 @@ ieee80211_rx_frame_softmac(struct ieee80211_device *ieee, struct sk_buff *skb,
return 0;
}
-/* The following are for a simpler TX queue management.
+/*
+ * The following are for a simpler TX queue management.
* Instead of using netif_[stop/wake]_queue, the driver
* will use these two functions (plus a reset one) that
* will internally call the kernel netif_* and take care
@@ -2051,7 +2069,8 @@ void ieee80211_softmac_xmit(struct ieee80211_txb *txb, struct ieee80211_device *
(!ieee->check_nic_enough_desc(ieee->dev, queue_index)) || \
(ieee->queue_stop)) {
/* insert the skb packet to the wait queue */
- /* as for the completion function, it does not need
+ /*
+ * as for the completion function, it does not need
* to check it any more.
* */
//printk("error:no descriptor left@queue_index %d\n", queue_index);
@@ -2205,7 +2224,8 @@ static void ieee80211_start_ibss_wq(struct work_struct *work)
{
struct delayed_work *dwork = to_delayed_work(work);
struct ieee80211_device *ieee = container_of(dwork, struct ieee80211_device, start_ibss_wq);
- /* iwconfig mode ad-hoc will schedule this and return
+ /*
+ * iwconfig mode ad-hoc will schedule this and return
* on the other hand this will block further iwconfig SET
* operations because of the wx_mutex hold.
* Anyway some most set operations set a flag to speed-up
@@ -2230,7 +2250,8 @@ static void ieee80211_start_ibss_wq(struct work_struct *work)
// if((IS_DOT11D_ENABLE(ieee)) && (ieee->state == IEEE80211_NOLINK))
if (ieee->state == IEEE80211_NOLINK)
ieee->current_network.channel = 6;
- /* if not then the state is not linked. Maybe the user switched to
+ /*
+ * if not then the state is not linked. Maybe the user switched to
* ad-hoc mode just after being in monitor mode, or just after
* being very few time in managed mode (so the card have had no
* time to scan all the chans..) or we have just run up the iface
@@ -2281,7 +2302,7 @@ static void ieee80211_start_ibss_wq(struct work_struct *work)
ieee->rate = 22;
}
- // By default, WMM function will be disabled in IBSS mode
+ /* By default, WMM function will be disabled in IBSS mode */
ieee->current_network.QoS_Enable = 0;
ieee->SetWirelessMode(ieee->dev, IEEE_G);
ieee->current_network.atim_window = 0;
@@ -2315,22 +2336,24 @@ inline void ieee80211_start_ibss(struct ieee80211_device *ieee)
void ieee80211_start_bss(struct ieee80211_device *ieee)
{
unsigned long flags;
- //
- // Ref: 802.11d 11.1.3.3
- // STA shall not start a BSS unless properly formed Beacon frame including a Country IE.
- //
+ /*
+ * Ref: 802.11d 11.1.3.3
+ * STA shall not start a BSS unless properly formed Beacon frame including a Country IE.
+ */
if (IS_DOT11D_ENABLE(ieee) && !IS_COUNTRY_IE_VALID(ieee)) {
if (!ieee->bGlobalDomain)
return;
}
- /* check if we have already found the net we
+ /*
+ * check if we have already found the net we
* are interested in (if any).
* if not (we are disassociated and we are not
* in associating / authenticating phase) start the background scanning.
*/
ieee80211_softmac_check_all_nets(ieee);
- /* ensure no-one start an associating process (thus setting
+ /*
+ * ensure no-one start an associating process (thus setting
* the ieee->state to ieee80211_ASSOCIATING) while we
* have just cheked it and we are going to enable scan.
* The ieee80211_new_net function is always called with
@@ -2378,19 +2401,20 @@ static void ieee80211_associate_retry_wq(struct work_struct *work)
if (ieee->state != IEEE80211_ASSOCIATING_RETRY)
goto exit;
- /* until we do not set the state to IEEE80211_NOLINK
- * there are no possibility to have someone else trying
- * to start an association procedure (we get here with
- * ieee->state = IEEE80211_ASSOCIATING).
- * When we set the state to IEEE80211_NOLINK it is possible
- * that the RX path run an attempt to associate, but
- * both ieee80211_softmac_check_all_nets and the
- * RX path works with ieee->lock held so there are no
- * problems. If we are still disassociated then start a scan.
- * the lock here is necessary to ensure no one try to start
- * an association procedure when we have just checked the
- * state and we are going to start the scan.
- */
+ /*
+ * until we do not set the state to IEEE80211_NOLINK
+ * there are no possibility to have someone else trying
+ * to start an association procedure (we get here with
+ * ieee->state = IEEE80211_ASSOCIATING).
+ * When we set the state to IEEE80211_NOLINK it is possible
+ * that the RX path run an attempt to associate, but
+ * both ieee80211_softmac_check_all_nets and the
+ * RX path works with ieee->lock held so there are no
+ * problems. If we are still disassociated then start a scan.
+ * the lock here is necessary to ensure no one try to start
+ * an association procedure when we have just checked the
+ * state and we are going to start the scan.
+ */
ieee->state = IEEE80211_NOLINK;
ieee80211_softmac_check_all_nets(ieee);
@@ -2468,7 +2492,7 @@ void ieee80211_stop_protocol(struct ieee80211_device *ieee)
ieee80211_stop_scan(ieee);
ieee80211_disassociate(ieee);
- RemoveAllTS(ieee); //added as we disconnect from the previous BSS, Remove all TS
+ RemoveAllTS(ieee); /* added as we disconnect from the previous BSS, Remove all TS */
}
void ieee80211_softmac_start_protocol(struct ieee80211_device *ieee)
@@ -2510,9 +2534,10 @@ void ieee80211_start_protocol(struct ieee80211_device *ieee)
ieee->last_packet_time[i] = 0;
}
- ieee->init_wmmparam_flag = 0;//reinitialize AC_xx_PARAM registers.
+ ieee->init_wmmparam_flag = 0;/* reinitialize AC_xx_PARAM registers. */
- /* if the user set the MAC of the ad-hoc cell and then
+ /*
+ * if the user set the MAC of the ad-hoc cell and then
* switch to managed mode, shall we make sure that association
* attempts does not fail just because the user provide the essid
* and the nic is still checking for the AP MAC ??
@@ -2544,7 +2569,7 @@ void ieee80211_softmac_init(struct ieee80211_device *ieee)
ieee->dot11d_info = kzalloc(sizeof(struct rt_dot11d_info), GFP_KERNEL);
if (!ieee->dot11d_info)
IEEE80211_DEBUG(IEEE80211_DL_ERR, "can't alloc memory for DOT11D\n");
- //added for AP roaming
+ /* added for AP roaming */
ieee->LinkDetectInfo.SlotNum = 2;
ieee->LinkDetectInfo.NumRecvBcnInPeriod = 0;
ieee->LinkDetectInfo.NumRecvDataInPeriod = 0;
@@ -2552,7 +2577,7 @@ void ieee80211_softmac_init(struct ieee80211_device *ieee)
ieee->assoc_id = 0;
ieee->queue_stop = 0;
ieee->scanning = 0;
- ieee->softmac_features = 0; //so IEEE2100-like driver are happy
+ ieee->softmac_features = 0; /* so IEEE2100-like driver are happy */
ieee->wap_set = 0;
ieee->ssid_set = 0;
ieee->proto_started = 0;
@@ -2560,10 +2585,10 @@ void ieee80211_softmac_init(struct ieee80211_device *ieee)
ieee->rate = 22;
ieee->ps = IEEE80211_PS_DISABLED;
ieee->sta_sleep = 0;
- ieee->Regdot11HTOperationalRateSet[0] = 0xff;//support MCS 0~7
- ieee->Regdot11HTOperationalRateSet[1] = 0xff;//support MCS 8~15
+ ieee->Regdot11HTOperationalRateSet[0] = 0xff;/* support MCS 0~7 */
+ ieee->Regdot11HTOperationalRateSet[1] = 0xff;/* support MCS 8~15 */
ieee->Regdot11HTOperationalRateSet[4] = 0x01;
- //added by amy
+ /* added by amy */
ieee->actscanning = false;
ieee->beinretry = false;
ieee->is_set_key = false;
@@ -2639,7 +2664,7 @@ static int ieee80211_wpa_mlme(struct ieee80211_device *ieee, int command, int re
switch (command) {
case IEEE_MLME_STA_DEAUTH:
- // silently ignore
+ /* silently ignore */
break;
case IEEE_MLME_STA_DISASSOC:
@@ -2728,7 +2753,8 @@ static int ieee80211_wpa_set_param(struct ieee80211_device *ieee, u8 name, u32 v
break;
case IEEE_PARAM_DROP_UNENCRYPTED: {
- /* HACK:
+ /*
+ * HACK:
*
* wpa_supplicant calls set_wpa_enabled when the driver
* is loaded and unloaded, regardless of if WPA is being
@@ -2744,7 +2770,8 @@ static int ieee80211_wpa_set_param(struct ieee80211_device *ieee, u8 name, u32 v
.enabled = value,
};
ieee->drop_unencrypted = value;
- /* We only change SEC_LEVEL for open mode. Others
+ /*
+ * We only change SEC_LEVEL for open mode. Others
* are set by ipw_wpa_set_encryption.
*/
if (!value) {
@@ -2771,7 +2798,7 @@ static int ieee80211_wpa_set_param(struct ieee80211_device *ieee, u8 name, u32 v
ieee->ieee802_1x = value;
break;
case IEEE_PARAM_WPAX_SELECT:
- // added for WPA2 mixed mode
+ /* added for WPA2 mixed mode */
spin_lock_irqsave(&ieee->wpax_suitlist_lock, flags);
ieee->wpax_type_set = 1;
ieee->wpax_type_notify = value;
@@ -2821,7 +2848,7 @@ static int ieee80211_wpa_set_encryption(struct ieee80211_device *ieee,
if (strcmp(param->u.crypt.alg, "none") == 0) {
if (crypt) {
sec.enabled = 0;
- // FIXME FIXME
+ /* FIXME FIXME */
//sec.encrypt = 0;
sec.level = SEC_LEVEL_0;
sec.flags |= SEC_ENABLED | SEC_LEVEL;
@@ -2830,7 +2857,7 @@ static int ieee80211_wpa_set_encryption(struct ieee80211_device *ieee,
goto done;
}
sec.enabled = 1;
-// FIXME FIXME
+/* FIXME FIXME */
// sec.encrypt = 1;
sec.flags |= SEC_ENABLED;
@@ -2839,7 +2866,7 @@ static int ieee80211_wpa_set_encryption(struct ieee80211_device *ieee,
strcmp(param->u.crypt.alg, "TKIP"))
goto skip_host_crypt;
- //set WEP40 first, it will be modified according to WEP104 or WEP40 at other place
+ /* set WEP40 first, it will be modified according to WEP104 or WEP40 at other place */
if (!strcmp(param->u.crypt.alg, "WEP"))
module = "ieee80211_crypt_wep";
else if (!strcmp(param->u.crypt.alg, "TKIP"))
@@ -2919,11 +2946,13 @@ static int ieee80211_wpa_set_encryption(struct ieee80211_device *ieee,
if (ieee->set_security)
ieee->set_security(ieee->dev, &sec);
- /* Do not reset port if card is in Managed mode since resetting will
+ /*
+ * Do not reset port if card is in Managed mode since resetting will
* generate new IEEE 802.11 authentication which may end up in looping
* with IEEE 802.1X. If your hardware requires a reset after WEP
* configuration (for example... Prism2), implement the reset_port in
- * the callbacks structures used to initialize the 802.11 stack. */
+ * the callbacks structures used to initialize the 802.11 stack.
+ */
if (ieee->reset_on_keychange &&
ieee->iw_mode != IW_MODE_INFRA &&
ieee->reset_port &&
diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211_softmac_wx.c b/drivers/staging/rtl8192u/ieee80211/ieee80211_softmac_wx.c
index aab1586fe0dd..2bf333c12bbc 100644
--- a/drivers/staging/rtl8192u/ieee80211/ieee80211_softmac_wx.c
+++ b/drivers/staging/rtl8192u/ieee80211/ieee80211_softmac_wx.c
@@ -112,7 +112,7 @@ int ieee80211_wx_get_wap(struct ieee80211_device *ieee,
if (ieee->iw_mode == IW_MODE_MONITOR)
return -1;
- /* We want avoid to give to the user inconsistent infos*/
+ /* We want avoid to give to the user inconsistent infos */
spin_lock_irqsave(&ieee->lock, flags);
if (ieee->state != IEEE80211_LINKED &&
@@ -159,7 +159,8 @@ int ieee80211_wx_set_wap(struct ieee80211_device *ieee,
if (ifup)
ieee80211_stop_protocol(ieee);
- /* just to avoid to give inconsistent infos in the
+ /*
+ * just to avoid to give inconsistent infos in the
* get wx method. not really needed otherwise
*/
spin_lock_irqsave(&ieee->lock, flags);
@@ -408,7 +409,8 @@ int ieee80211_wx_set_essid(struct ieee80211_device *ieee,
ieee80211_stop_protocol(ieee);
- /* this is just to be sure that the GET wx callback
+ /*
+ * this is just to be sure that the GET wx callback
* has consisten infos. not needed otherwise
*/
spin_lock_irqsave(&ieee->lock, flags);
diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211_tx.c b/drivers/staging/rtl8192u/ieee80211/ieee80211_tx.c
index 8e1ec4409b4f..f5c991f6d34f 100644
--- a/drivers/staging/rtl8192u/ieee80211/ieee80211_tx.c
+++ b/drivers/staging/rtl8192u/ieee80211/ieee80211_tx.c
@@ -188,12 +188,14 @@ int ieee80211_encrypt_fragment(
return -1;
}
- /* To encrypt, frame format is:
+ /*
+ * To encrypt, frame format is:
* IV (4 bytes), clear payload (including SNAP), ICV (4 bytes)
*/
- // PR: FIXME: Copied from hostap. Check fragmentation/MSDU/MPDU encryption.
- /* Host-based IEEE 802.11 fragmentation for TX is not yet supported, so
+ /* PR: FIXME: Copied from hostap. Check fragmentation/MSDU/MPDU encryption. */
+ /*
+ * Host-based IEEE 802.11 fragmentation for TX is not yet supported, so
* call both MSDU and MPDU encryption functions from here.
*/
atomic_inc(&crypt->refcnt);
@@ -255,8 +257,8 @@ static struct ieee80211_txb *ieee80211_alloc_txb(int nr_frags, int txb_size,
return txb;
}
-// Classify the to-be send data packet
-// Need to acquire the sent queue index.
+/* Classify the to-be send data packet */
+/* Need to acquire the sent queue index. */
static int
ieee80211_classify(struct sk_buff *skb, struct ieee80211_network *network)
{
@@ -301,11 +303,11 @@ static void ieee80211_tx_query_agg_cap(struct ieee80211_device *ieee,
if (is_multicast_ether_addr(hdr->addr1))
return;
- //check packet and mode later
+ /* check packet and mode later */
#ifdef TO_DO_LIST
if (pTcb->PacketLength >= 4096)
return;
- // For RTL819X, if pairwisekey = wep/tkip, we don't aggrregation.
+ /* For RTL819X, if pairwisekey = wep/tkip, we don't aggrregation. */
if (!Adapter->HalFunc.GetNmodeSupportBySecCfgHandler(Adapter))
return;
#endif
@@ -366,8 +368,8 @@ static void ieee80211_qurey_ShortPreambleMode(struct ieee80211_device *ieee,
struct cb_desc *tcb_desc)
{
tcb_desc->bUseShortPreamble = false;
- if (tcb_desc->data_rate == 2)
- {//// 1M can only use Long Preamble. 11B spec
+ if (tcb_desc->data_rate == 2) {
+ /* 1M can only use Long Preamble. 11B spec */
return;
}
else if (ieee->current_network.capability & WLAN_CAPABILITY_SHORT_PREAMBLE)
@@ -411,9 +413,9 @@ static void ieee80211_query_BandwidthMode(struct ieee80211_device *ieee,
if (tcb_desc->bMulticast || tcb_desc->bBroadcast)
return;
- if ((tcb_desc->data_rate & 0x80)==0) // If using legacy rate, it shall use 20MHz channel.
+ if ((tcb_desc->data_rate & 0x80) == 0) /* If using legacy rate, it shall use 20MHz channel. */
return;
- //BandWidthAutoSwitch is for auto switch to 20 or 40 in long distance
+ /* BandWidthAutoSwitch is for auto switch to 20 or 40 in long distance */
if(pHTInfo->bCurBW40MHz && pHTInfo->bCurTxBW40MHz && !ieee->bandwidth_auto_switch.bforced_tx20Mhz)
tcb_desc->bPacketBW = true;
return;
@@ -423,25 +425,27 @@ static void ieee80211_query_protectionmode(struct ieee80211_device *ieee,
struct cb_desc *tcb_desc,
struct sk_buff *skb)
{
- // Common Settings
+ /* Common Settings */
tcb_desc->bRTSSTBC = false;
- tcb_desc->bRTSUseShortGI = false; // Since protection frames are always sent by legacy rate, ShortGI will never be used.
- tcb_desc->bCTSEnable = false; // Most of protection using RTS/CTS
- tcb_desc->RTSSC = 0; // 20MHz: Don't care; 40MHz: Duplicate.
- tcb_desc->bRTSBW = false; // RTS frame bandwidth is always 20MHz
+ tcb_desc->bRTSUseShortGI = false; /* Since protection frames are always sent by legacy rate, ShortGI will never be used. */
+ tcb_desc->bCTSEnable = false; /* Most of protection using RTS/CTS */
+ tcb_desc->RTSSC = 0; /* 20MHz: Don't care; 40MHz: Duplicate. */
+ tcb_desc->bRTSBW = false; /* RTS frame bandwidth is always 20MHz */
- if(tcb_desc->bBroadcast || tcb_desc->bMulticast)//only unicast frame will use rts/cts
+ if (tcb_desc->bBroadcast || tcb_desc->bMulticast)/* only unicast frame will use rts/cts */
return;
- if (is_broadcast_ether_addr(skb->data+16)) //check addr3 as infrastructure add3 is DA.
+ if (is_broadcast_ether_addr(skb->data+16)) /* check addr3 as infrastructure add3 is DA. */
return;
- if (ieee->mode < IEEE_N_24G) //b, g mode
+ if (ieee->mode < IEEE_N_24G) /* b, g mode */
{
- // (1) RTS_Threshold is compared to the MPDU, not MSDU.
- // (2) If there are more than one frag in this MSDU, only the first frag uses protection frame.
- // Other fragments are protected by previous fragment.
- // So we only need to check the length of first fragment.
+ /*
+ * (1) RTS_Threshold is compared to the MPDU, not MSDU.
+ * (2) If there are more than one frag in this MSDU, only the first frag uses protection frame.
+ * Other fragments are protected by previous fragment.
+ * So we only need to check the length of first fragment.
+ */
if (skb->len > ieee->rts)
{
tcb_desc->bRTSEnable = true;
@@ -449,57 +453,54 @@ static void ieee80211_query_protectionmode(struct ieee80211_device *ieee,
}
else if (ieee->current_network.buseprotection)
{
- // Use CTS-to-SELF in protection mode.
+ /* Use CTS-to-SELF in protection mode. */
tcb_desc->bRTSEnable = true;
tcb_desc->bCTSEnable = true;
tcb_desc->rts_rate = MGN_24M;
}
- //otherwise return;
+ /* otherwise return; */
return;
- }
- else
- {// 11n High throughput case.
+ } else {/* 11n High throughput case. */
PRT_HIGH_THROUGHPUT pHTInfo = ieee->pHTInfo;
while (true)
{
- //check ERP protection
- if (ieee->current_network.buseprotection)
- {// CTS-to-SELF
+ /* check ERP protection */
+ if (ieee->current_network.buseprotection) {/* CTS-to-SELF */
tcb_desc->bRTSEnable = true;
tcb_desc->bCTSEnable = true;
tcb_desc->rts_rate = MGN_24M;
break;
}
- //check HT op mode
+ /* check HT op mode */
if(pHTInfo->bCurrentHTSupport && pHTInfo->bEnableHT)
{
u8 HTOpMode = pHTInfo->CurrentOpMode;
if((pHTInfo->bCurBW40MHz && (HTOpMode == 2 || HTOpMode == 3)) ||
(!pHTInfo->bCurBW40MHz && HTOpMode == 3) )
{
- tcb_desc->rts_rate = MGN_24M; // Rate is 24Mbps.
+ tcb_desc->rts_rate = MGN_24M; /* Rate is 24Mbps. */
tcb_desc->bRTSEnable = true;
break;
}
}
- //check rts
+ /* check rts */
if (skb->len > ieee->rts)
{
- tcb_desc->rts_rate = MGN_24M; // Rate is 24Mbps.
+ tcb_desc->rts_rate = MGN_24M; /* Rate is 24Mbps. */
tcb_desc->bRTSEnable = true;
break;
}
- //to do list: check MIMO power save condition.
- //check AMPDU aggregation for TXOP
+ /* to do list: check MIMO power save condition. */
+ /* check AMPDU aggregation for TXOP */
if(tcb_desc->bAMPDUEnable)
{
- tcb_desc->rts_rate = MGN_24M; // Rate is 24Mbps.
- // According to 8190 design, firmware sends CF-End only if RTS/CTS is enabled. However, it degrads
- // throughput around 10M, so we disable of this mechanism. 2007.08.03 by Emily
+ tcb_desc->rts_rate = MGN_24M; /* Rate is 24Mbps. */
+ /* According to 8190 design, firmware sends CF-End only if RTS/CTS is enabled. However, it degrads */
+ /* throughput around 10M, so we disable of this mechanism. 2007.08.03 by Emily */
tcb_desc->bRTSEnable = false;
break;
}
- //check IOT action
+ /* check IOT action */
if(pHTInfo->IOTAction & HT_IOT_ACT_FORCED_CTS2SELF)
{
tcb_desc->bCTSEnable = true;
@@ -507,11 +508,11 @@ static void ieee80211_query_protectionmode(struct ieee80211_device *ieee,
tcb_desc->bRTSEnable = true;
break;
}
- // Totally no protection case!!
+ /* Totally no protection case!! */
goto NO_PROTECTION;
}
}
- // For test , CTS replace with RTS
+ /* For test , CTS replace with RTS */
if (0) {
tcb_desc->bCTSEnable = true;
tcb_desc->rts_rate = MGN_24M;
@@ -567,7 +568,7 @@ static void ieee80211_query_seqnum(struct ieee80211_device *ieee,
{
if (is_multicast_ether_addr(dst))
return;
- if (IsQoSDataFrame(skb->data)) //we deal qos data only
+ if (IsQoSDataFrame(skb->data)) /* we deal qos data only */
{
struct tx_ts_record *pTS = NULL;
if (!GetTs(ieee, (struct ts_common_info **)(&pTS), dst, skb->priority, TX_DIR, true))
@@ -603,7 +604,8 @@ int ieee80211_xmit(struct sk_buff *skb, struct net_device *dev)
spin_lock_irqsave(&ieee->lock, flags);
- /* If there is no driver handler to take the TXB, dont' bother
+ /*
+ * If there is no driver handler to take the TXB, dont' bother
* creating it...
*/
if ((!ieee->hard_start_xmit && !(ieee->softmac_features & IEEE_SOFTMAC_TX_QUEUE))||
@@ -667,14 +669,16 @@ int ieee80211_xmit(struct sk_buff *skb, struct net_device *dev)
if (ieee->iw_mode == IW_MODE_INFRA) {
fc |= IEEE80211_FCTL_TODS;
- /* To DS: Addr1 = BSSID, Addr2 = SA,
+ /*
+ * To DS: Addr1 = BSSID, Addr2 = SA,
* Addr3 = DA
*/
memcpy(&header.addr1, ieee->current_network.bssid, ETH_ALEN);
memcpy(&header.addr2, &src, ETH_ALEN);
memcpy(&header.addr3, &dest, ETH_ALEN);
} else if (ieee->iw_mode == IW_MODE_ADHOC) {
- /* not From/To DS: Addr1 = DA, Addr2 = SA,
+ /*
+ * not From/To DS: Addr1 = DA, Addr2 = SA,
* Addr3 = BSSID
*/
memcpy(&header.addr1, dest, ETH_ALEN);
@@ -684,7 +688,8 @@ int ieee80211_xmit(struct sk_buff *skb, struct net_device *dev)
header.frame_ctl = cpu_to_le16(fc);
- /* Determine fragmentation size based on destination (multicast
+ /*
+ * Determine fragmentation size based on destination (multicast
* and broadcast are not fragmented)
*/
if (is_multicast_ether_addr(header.addr1)) {
@@ -692,7 +697,7 @@ int ieee80211_xmit(struct sk_buff *skb, struct net_device *dev)
qos_ctl |= QOS_CTL_NOTCONTAIN_ACK;
}
else {
- frag_size = ieee->fts;//default:392
+ frag_size = ieee->fts;/* default:392 */
qos_ctl = 0;
}
@@ -702,12 +707,13 @@ int ieee80211_xmit(struct sk_buff *skb, struct net_device *dev)
hdr_len = IEEE80211_3ADDR_LEN + 2;
skb->priority = ieee80211_classify(skb, &ieee->current_network);
- qos_ctl |= skb->priority; //set in the ieee80211_classify
+ qos_ctl |= skb->priority; /* set in the ieee80211_classify */
header.qos_ctl = cpu_to_le16(qos_ctl & IEEE80211_QOS_TID);
} else {
hdr_len = IEEE80211_3ADDR_LEN;
}
- /* Determine amount of payload per fragment. Regardless of if
+ /*
+ * Determine amount of payload per fragment. Regardless of if
* this stack is providing the full 802.11 header, one will
* eventually be affixed to this fragment -- so we must account for
* it when determining the amount of payload space.
@@ -722,7 +728,8 @@ int ieee80211_xmit(struct sk_buff *skb, struct net_device *dev)
bytes_per_frag -= crypt->ops->extra_prefix_len +
crypt->ops->extra_postfix_len;
- /* Number of fragments is the total bytes_per_frag /
+ /*
+ * Number of fragments is the total bytes_per_frag /
* payload_per_fragment
*/
nr_frags = bytes / bytes_per_frag;
@@ -732,7 +739,8 @@ int ieee80211_xmit(struct sk_buff *skb, struct net_device *dev)
else
bytes_last_frag = bytes_per_frag;
- /* When we allocate the TXB we allocate enough space for the reserve
+ /*
+ * When we allocate the TXB we allocate enough space for the reserve
* and full fragment bytes (bytes_per_frag doesn't include prefix,
* postfix, header, FCS, etc.)
*/
@@ -780,7 +788,8 @@ int ieee80211_xmit(struct sk_buff *skb, struct net_device *dev)
}
frag_hdr = skb_put_data(skb_frag, &header, hdr_len);
- /* If this is not the last fragment, then add the MOREFRAGS
+ /*
+ * If this is not the last fragment, then add the MOREFRAGS
* bit to the frame control
*/
if (i != nr_frags - 1) {
@@ -795,7 +804,7 @@ int ieee80211_xmit(struct sk_buff *skb, struct net_device *dev)
//if(ieee->current_network.QoS_Enable)
if(qos_actived)
{
- // add 1 only indicate to corresponding seq number control 2006/7/12
+ /* add 1 only indicate to corresponding seq number control 2006/7/12 */
frag_hdr->seq_ctl = cpu_to_le16(ieee->seq_ctrl[UP2AC(skb->priority)+1]<<4 | i);
} else {
frag_hdr->seq_ctl = cpu_to_le16(ieee->seq_ctrl[0]<<4 | i);
@@ -814,7 +823,8 @@ int ieee80211_xmit(struct sk_buff *skb, struct net_device *dev)
/* Advance the SKB... */
skb_pull(skb, bytes);
- /* Encryption routine will move the header forward in order
+ /*
+ * Encryption routine will move the header forward in order
* to insert the IV between the header and the payload
*/
if (encrypt)
@@ -856,7 +866,7 @@ int ieee80211_xmit(struct sk_buff *skb, struct net_device *dev)
}
success:
-//WB add to fill data tcb_desc here. only first fragment is considered, need to change, and you may remove to other place.
+/* WB add to fill data tcb_desc here. only first fragment is considered, need to change, and you may remove to other place. */
if (txb)
{
struct cb_desc *tcb_desc = (struct cb_desc *)(txb->fragments[0]->cb + MAX_DEV_ADDR_SIZE);
diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211_wx.c b/drivers/staging/rtl8192u/ieee80211/ieee80211_wx.c
index dead134f6de0..6cf9e25d6607 100644
--- a/drivers/staging/rtl8192u/ieee80211/ieee80211_wx.c
+++ b/drivers/staging/rtl8192u/ieee80211/ieee80211_wx.c
@@ -130,7 +130,7 @@ static inline char *rtl819x_translate_scan(struct ieee80211_device *ieee,
max_rate = rate;
}
- if (network->mode >= IEEE_N_24G)//add N rate here;
+ if (network->mode >= IEEE_N_24G)/* add N rate here; */
{
struct ht_capability_ele *ht_cap = NULL;
bool is40M = false, isShortGI = false;
@@ -211,8 +211,10 @@ static inline char *rtl819x_translate_scan(struct ieee80211_device *ieee,
}
- /* Add EXTRA: Age to display seconds since last beacon/probe response
- * for given network. */
+ /*
+ * Add EXTRA: Age to display seconds since last beacon/probe response
+ * for given network.
+ */
iwe.cmd = IWEVCUSTOM;
p = custom;
p += snprintf(p, MAX_CUSTOM_LEN - (p - custom),
@@ -233,7 +235,7 @@ int ieee80211_wx_get_scan(struct ieee80211_device *ieee,
char *ev = extra;
// char *stop = ev + IW_SCAN_MAX_DATA;
- char *stop = ev + wrqu->data.length;//IW_SCAN_MAX_DATA;
+ char *stop = ev + wrqu->data.length;/* IW_SCAN_MAX_DATA; */
//char *stop = ev + IW_SCAN_MAX_DATA;
int i = 0;
int err = 0;
@@ -309,8 +311,10 @@ int ieee80211_wx_set_encode(struct ieee80211_device *ieee,
} else
IEEE80211_DEBUG_WX("Disabling encryption.\n");
- /* Check all the keys to see if any are still configured,
- * and if no key index was provided, de-init them all */
+ /*
+ * Check all the keys to see if any are still configured,
+ * and if no key index was provided, de-init them all
+ */
for (i = 0; i < WEP_KEYS; i++) {
if (ieee->crypt[i] != NULL) {
if (key_provided)
@@ -336,8 +340,10 @@ int ieee80211_wx_set_encode(struct ieee80211_device *ieee,
if (*crypt != NULL && (*crypt)->ops != NULL &&
strcmp((*crypt)->ops->name, "WEP") != 0) {
- /* changing to use WEP; deinit previously used algorithm
- * on this key */
+ /*
+ * changing to use WEP; deinit previously used algorithm
+ * on this key
+ */
ieee80211_crypt_delayed_deinit(ieee, crypt);
}
@@ -380,7 +386,8 @@ int ieee80211_wx_set_encode(struct ieee80211_device *ieee,
(*crypt)->ops->set_key(sec.keys[key], len, NULL,
(*crypt)->priv);
sec.flags |= BIT(key);
- /* This ensures a key will be activated if no key is
+ /*
+ * This ensures a key will be activated if no key is
* explicitly set
*/
if (key == sec.active_key)
@@ -422,19 +429,23 @@ int ieee80211_wx_set_encode(struct ieee80211_device *ieee,
IEEE80211_DEBUG_WX("Auth: %s\n", sec.auth_mode == WLAN_AUTH_OPEN ?
"OPEN" : "SHARED KEY");
- /* For now we just support WEP, so only set that security level...
- * TODO: When WPA is added this is one place that needs to change */
+ /*
+ * For now we just support WEP, so only set that security level...
+ * TODO: When WPA is added this is one place that needs to change
+ */
sec.flags |= SEC_LEVEL;
sec.level = SEC_LEVEL_1; /* 40 and 104 bit WEP */
if (ieee->set_security)
ieee->set_security(dev, &sec);
- /* Do not reset port if card is in Managed mode since resetting will
+ /*
+ * Do not reset port if card is in Managed mode since resetting will
* generate new IEEE 802.11 authentication which may end up in looping
* with IEEE 802.1X. If your hardware requires a reset after WEP
* configuration (for example... Prism2), implement the reset_port in
- * the callbacks structures used to initialize the 802.11 stack. */
+ * the callbacks structures used to initialize the 802.11 stack.
+ */
if (ieee->reset_on_keychange &&
ieee->iw_mode != IW_MODE_INFRA &&
ieee->reset_port && ieee->reset_port(dev)) {
@@ -612,7 +623,7 @@ int ieee80211_wx_set_encode_ext(struct ieee80211_device *ieee,
ret = -EINVAL;
goto done;
}
- //skip_host_crypt:
+ /* skip_host_crypt: */
if (ext->ext_flags & IW_ENCODE_EXT_SET_TX_KEY) {
ieee->tx_keyidx = idx;
sec.active_key = idx;
@@ -738,9 +749,9 @@ int ieee80211_wx_set_auth(struct ieee80211_device *ieee,
case IW_AUTH_CIPHER_GROUP:
case IW_AUTH_KEY_MGMT:
/*
- * * Host AP driver does not use these parameters and allows
- * * wpa_supplicant to control them internally.
- * */
+ * Host AP driver does not use these parameters and allows
+ * wpa_supplicant to control them internally.
+ */
break;
case IW_AUTH_TKIP_COUNTERMEASURES:
ieee->tkip_countermeasures = data->value;
diff --git a/drivers/staging/rtl8192u/ieee80211/rtl819x_BA.h b/drivers/staging/rtl8192u/ieee80211/rtl819x_BA.h
index 1a727856ba53..215748895c2d 100644
--- a/drivers/staging/rtl8192u/ieee80211/rtl819x_BA.h
+++ b/drivers/staging/rtl8192u/ieee80211/rtl819x_BA.h
@@ -51,4 +51,4 @@ struct ba_record {
union sequence_control start_seq_ctrl;
};
-#endif //end _BATYPE_H_
+#endif /* end _BATYPE_H_ */
diff --git a/drivers/staging/rtl8192u/ieee80211/rtl819x_BAProc.c b/drivers/staging/rtl8192u/ieee80211/rtl819x_BAProc.c
index 53869b3c985c..adfe1878f36d 100644
--- a/drivers/staging/rtl8192u/ieee80211/rtl819x_BAProc.c
+++ b/drivers/staging/rtl8192u/ieee80211/rtl819x_BAProc.c
@@ -42,17 +42,17 @@ static void DeActivateBAEntry(struct ieee80211_device *ieee, struct ba_record *p
********************************************************************************************************************/
static u8 TxTsDeleteBA(struct ieee80211_device *ieee, struct tx_ts_record *pTxTs)
{
- struct ba_record *pAdmittedBa = &pTxTs->tx_admitted_ba_record; //These two BA entries must exist in TS structure
+ struct ba_record *pAdmittedBa = &pTxTs->tx_admitted_ba_record; /* These two BA entries must exist in TS structure */
struct ba_record *pPendingBa = &pTxTs->tx_pending_ba_record;
u8 bSendDELBA = false;
- // Delete pending BA
+ /* Delete pending BA */
if (pPendingBa->valid) {
DeActivateBAEntry(ieee, pPendingBa);
bSendDELBA = true;
}
- // Delete admitted BA
+ /* Delete admitted BA */
if (pAdmittedBa->valid) {
DeActivateBAEntry(ieee, pAdmittedBa);
bSendDELBA = true;
@@ -95,7 +95,7 @@ void ResetBaEntry(struct ba_record *pBA)
pBA->dialog_token = 0;
pBA->start_seq_ctrl.short_data = 0;
}
-//These functions need porting here or not?
+/* These functions need porting here or not? */
/*******************************************************************************************************************************
*function: construct ADDBAREQ and ADDBARSP frame here together.
* input: u8* Dst //ADDBA frame's destination
@@ -117,11 +117,11 @@ static struct sk_buff *ieee80211_ADDBA(struct ieee80211_device *ieee, u8 *Dst, s
IEEE80211_DEBUG(IEEE80211_DL_ERR, "pBA is NULL\n");
return NULL;
}
- skb = dev_alloc_skb(len + sizeof(struct rtl_80211_hdr_3addr)); //need to add something others? FIXME
+ skb = dev_alloc_skb(len + sizeof(struct rtl_80211_hdr_3addr)); /* need to add something others? FIXME */
if (!skb)
return NULL;
- memset(skb->data, 0, sizeof(struct rtl_80211_hdr_3addr)); //I wonder whether it's necessary. Apparently kernel will not do it when alloc a skb.
+ memset(skb->data, 0, sizeof(struct rtl_80211_hdr_3addr)); /* I wonder whether it's necessary. Apparently kernel will not do it when alloc a skb. */
skb_reserve(skb, ieee->tx_headroom);
BAReq = skb_put(skb, sizeof(struct rtl_80211_hdr_3addr));
@@ -131,33 +131,33 @@ static struct sk_buff *ieee80211_ADDBA(struct ieee80211_device *ieee, u8 *Dst, s
memcpy(BAReq->addr3, ieee->current_network.bssid, ETH_ALEN);
- BAReq->frame_ctl = cpu_to_le16(IEEE80211_STYPE_MANAGE_ACT); //action frame
+ BAReq->frame_ctl = cpu_to_le16(IEEE80211_STYPE_MANAGE_ACT); /* action frame */
//tag += sizeof( struct rtl_80211_hdr_3addr); //move to action field
tag = skb_put(skb, 9);
*tag++ = ACT_CAT_BA;
*tag++ = type;
- // Dialog Token
+ /* Dialog Token */
*tag++ = pBA->dialog_token;
if (ACT_ADDBARSP == type) {
- // Status Code
+ /* Status Code */
netdev_info(ieee->dev, "=====>to send ADDBARSP\n");
put_unaligned_le16(StatusCode, tag);
tag += 2;
}
- // BA Parameter Set
+ /* BA Parameter Set */
put_unaligned_le16(pBA->param_set.short_data, tag);
tag += 2;
- // BA Timeout Value
+ /* BA Timeout Value */
put_unaligned_le16(pBA->timeout_value, tag);
tag += 2;
if (ACT_ADDBAREQ == type) {
- // BA Start SeqCtrl
+ /* BA Start SeqCtrl */
memcpy(tag, (u8 *)&(pBA->start_seq_ctrl), 2);
tag += 2;
}
@@ -202,7 +202,7 @@ static struct sk_buff *ieee80211_DELBA(
DelbaParamSet.field.initiator = (TxRxSelect == TX_DIR) ? 1 : 0;
DelbaParamSet.field.tid = pBA->param_set.field.tid;
- skb = dev_alloc_skb(len + sizeof(struct rtl_80211_hdr_3addr)); //need to add something others? FIXME
+ skb = dev_alloc_skb(len + sizeof(struct rtl_80211_hdr_3addr)); /* need to add something others? FIXME */
if (!skb)
return NULL;
// memset(skb->data, 0, len+sizeof( struct rtl_80211_hdr_3addr));
@@ -213,18 +213,18 @@ static struct sk_buff *ieee80211_DELBA(
memcpy(Delba->addr1, dst, ETH_ALEN);
memcpy(Delba->addr2, ieee->dev->dev_addr, ETH_ALEN);
memcpy(Delba->addr3, ieee->current_network.bssid, ETH_ALEN);
- Delba->frame_ctl = cpu_to_le16(IEEE80211_STYPE_MANAGE_ACT); //action frame
+ Delba->frame_ctl = cpu_to_le16(IEEE80211_STYPE_MANAGE_ACT); /* action frame */
tag = skb_put(skb, 6);
*tag++ = ACT_CAT_BA;
*tag++ = ACT_DELBA;
- // DELBA Parameter Set
+ /* DELBA Parameter Set */
put_unaligned_le16(DelbaParamSet.short_data, tag);
tag += 2;
- // Reason Code
+ /* Reason Code */
put_unaligned_le16(ReasonCode, tag);
tag += 2;
@@ -247,13 +247,15 @@ static void ieee80211_send_ADDBAReq(struct ieee80211_device *ieee,
u8 *dst, struct ba_record *pBA)
{
struct sk_buff *skb;
- skb = ieee80211_ADDBA(ieee, dst, pBA, 0, ACT_ADDBAREQ); //construct ACT_ADDBAREQ frames so set statuscode zero.
+ skb = ieee80211_ADDBA(ieee, dst, pBA, 0, ACT_ADDBAREQ); /* construct ACT_ADDBAREQ frames so set statuscode zero. */
if (skb) {
softmac_mgmt_xmit(skb, ieee);
- //add statistic needed here.
- //and skb will be freed in softmac_mgmt_xmit(), so omit all dev_kfree_skb_any() outside softmac_mgmt_xmit()
- //WB
+ /*
+ * add statistic needed here.
+ * and skb will be freed in softmac_mgmt_xmit(), so omit all dev_kfree_skb_any() outside softmac_mgmt_xmit()
+ * WB
+ */
} else {
IEEE80211_DEBUG(IEEE80211_DL_ERR, "alloc skb error in function %s()\n", __func__);
}
@@ -271,10 +273,10 @@ static void ieee80211_send_ADDBARsp(struct ieee80211_device *ieee, u8 *dst,
struct ba_record *pBA, u16 StatusCode)
{
struct sk_buff *skb;
- skb = ieee80211_ADDBA(ieee, dst, pBA, StatusCode, ACT_ADDBARSP); //construct ACT_ADDBARSP frames
+ skb = ieee80211_ADDBA(ieee, dst, pBA, StatusCode, ACT_ADDBARSP); /* construct ACT_ADDBARSP frames */
if (skb) {
softmac_mgmt_xmit(skb, ieee);
- //same above
+ /* same above */
} else {
IEEE80211_DEBUG(IEEE80211_DL_ERR, "alloc skb error in function %s()\n", __func__);
}
@@ -297,10 +299,10 @@ static void ieee80211_send_DELBA(struct ieee80211_device *ieee, u8 *dst,
u16 ReasonCode)
{
struct sk_buff *skb;
- skb = ieee80211_DELBA(ieee, dst, pBA, TxRxSelect, ReasonCode); //construct ACT_ADDBARSP frames
+ skb = ieee80211_DELBA(ieee, dst, pBA, TxRxSelect, ReasonCode); /* construct ACT_ADDBARSP frames */
if (skb) {
softmac_mgmt_xmit(skb, ieee);
- //same above
+ /* same above */
} else {
IEEE80211_DEBUG(IEEE80211_DL_ERR, "alloc skb error in function %s()\n", __func__);
}
@@ -337,13 +339,13 @@ int ieee80211_rx_ADDBAReq(struct ieee80211_device *ieee, struct sk_buff *skb)
tag = (u8 *)req;
dst = &req->addr2[0];
tag += sizeof(struct rtl_80211_hdr_3addr);
- pDialogToken = tag + 2; //category+action
- pBaParamSet = (union ba_param_set *)(tag + 3); //+DialogToken
+ pDialogToken = tag + 2; /* category+action */
+ pBaParamSet = (union ba_param_set *)(tag + 3); /* +DialogToken */
pBaTimeoutVal = (u16 *)(tag + 5);
pBaStartSeqCtrl = (union sequence_control *)(req + 7);
netdev_info(ieee->dev, "====================>rx ADDBAREQ from :%pM\n", dst);
-//some other capability is not ready now.
+ /* some other capability is not ready now. */
if ((ieee->current_network.qos_data.active == 0) ||
(!ieee->pHTInfo->bCurrentHTSupport)) //||
// (!ieee->pStaQos->bEnableRxImmBA) )
@@ -352,8 +354,8 @@ int ieee80211_rx_ADDBAReq(struct ieee80211_device *ieee, struct sk_buff *skb)
IEEE80211_DEBUG(IEEE80211_DL_ERR, "Failed to reply on ADDBA_REQ as some capability is not ready(%d, %d)\n", ieee->current_network.qos_data.active, ieee->pHTInfo->bCurrentHTSupport);
goto OnADDBAReq_Fail;
}
- // Search for related traffic stream.
- // If there is no matched TS, reject the ADDBA request.
+ /* Search for related traffic stream. */
+ /* If there is no matched TS, reject the ADDBA request. */
if (!GetTs(
ieee,
(struct ts_common_info **)(&pTS),
@@ -366,23 +368,23 @@ int ieee80211_rx_ADDBAReq(struct ieee80211_device *ieee, struct sk_buff *skb)
goto OnADDBAReq_Fail;
}
pBA = &pTS->rx_admitted_ba_record;
- // To Determine the ADDBA Req content
- // We can do much more check here, including buffer_size, AMSDU_Support, Policy, StartSeqCtrl...
- // I want to check StartSeqCtrl to make sure when we start aggregation!!!
- //
+ /*
+ * To Determine the ADDBA Req content
+ * We can do much more check here, including buffer_size, AMSDU_Support, Policy, StartSeqCtrl...
+ * I want to check StartSeqCtrl to make sure when we start aggregation!!!
+ */
if (pBaParamSet->field.ba_policy == BA_POLICY_DELAYED) {
rc = ADDBA_STATUS_INVALID_PARAM;
IEEE80211_DEBUG(IEEE80211_DL_ERR, "BA Policy is not correct in %s()\n", __func__);
goto OnADDBAReq_Fail;
}
- // Admit the ADDBA Request
- //
+ /* Admit the ADDBA Request */
DeActivateBAEntry(ieee, pBA);
pBA->dialog_token = *pDialogToken;
pBA->param_set = *pBaParamSet;
pBA->timeout_value = *pBaTimeoutVal;
pBA->start_seq_ctrl = *pBaStartSeqCtrl;
- //for half N mode we only aggregate 1 frame
+ /* for half N mode we only aggregate 1 frame */
if (ieee->GetHalfNmodeSupportByAPsHandler(ieee->dev))
pBA->param_set.field.buffer_size = 1;
else
@@ -390,7 +392,7 @@ int ieee80211_rx_ADDBAReq(struct ieee80211_device *ieee, struct sk_buff *skb)
ActivateBAEntry(ieee, pBA, pBA->timeout_value);
ieee80211_send_ADDBARsp(ieee, dst, pBA, ADDBA_STATUS_SUCCESS);
- // End of procedure.
+ /* End of procedure. */
return 0;
OnADDBAReq_Fail:
@@ -401,7 +403,7 @@ int ieee80211_rx_ADDBAReq(struct ieee80211_device *ieee, struct sk_buff *skb)
BA.dialog_token = *pDialogToken;
BA.param_set.field.ba_policy = BA_POLICY_IMMEDIATE;
ieee80211_send_ADDBARsp(ieee, dst, &BA, rc);
- return 0; //we send RSP out.
+ return 0; /* we send RSP out. */
}
}
@@ -438,8 +440,10 @@ int ieee80211_rx_ADDBARsp(struct ieee80211_device *ieee, struct sk_buff *skb)
pBaParamSet = (union ba_param_set *)(tag + 5);
pBaTimeoutVal = (u16 *)(tag + 7);
- // Check the capability
- // Since we can always receive A-MPDU, we just check if it is under HT mode.
+ /*
+ * Check the capability
+ * Since we can always receive A-MPDU, we just check if it is under HT mode.
+ */
if (ieee->current_network.qos_data.active == 0 ||
!ieee->pHTInfo->bCurrentHTSupport ||
!ieee->pHTInfo->bCurrentAMPDUEnable) {
@@ -449,10 +453,10 @@ int ieee80211_rx_ADDBARsp(struct ieee80211_device *ieee, struct sk_buff *skb)
}
- //
- // Search for related TS.
- // If there is no TS found, we wil reject ADDBA Rsp by sending DELBA frame.
- //
+ /*
+ * Search for related TS.
+ * If there is no TS found, we wil reject ADDBA Rsp by sending DELBA frame.
+ */
if (!GetTs(
ieee,
(struct ts_common_info **)(&pTS),
@@ -470,12 +474,12 @@ int ieee80211_rx_ADDBARsp(struct ieee80211_device *ieee, struct sk_buff *skb)
pAdmittedBA = &pTS->tx_admitted_ba_record;
- //
- // Check if related BA is waiting for setup.
- // If not, reject by sending DELBA frame.
- //
+ /*
+ * Check if related BA is waiting for setup.
+ * If not, reject by sending DELBA frame.
+ */
if (pAdmittedBA->valid) {
- // Since BA is already setup, we ignore all other ADDBA Response.
+ /* Since BA is already setup, we ignore all other ADDBA Response. */
IEEE80211_DEBUG(IEEE80211_DL_BA, "OnADDBARsp(): Recv ADDBA Rsp. Drop because already admit it! \n");
return -1;
} else if ((!pPendingBA->valid) || (*pDialogToken != pPendingBA->dialog_token)) {
@@ -489,13 +493,13 @@ int ieee80211_rx_ADDBARsp(struct ieee80211_device *ieee, struct sk_buff *skb)
if (*pStatusCode == ADDBA_STATUS_SUCCESS) {
- //
- // Determine ADDBA Rsp content here.
- // We can compare the value of BA parameter set that Peer returned and Self sent.
- // If it is OK, then admitted. Or we can send DELBA to cancel BA mechanism.
- //
+ /*
+ * Determine ADDBA Rsp content here.
+ * We can compare the value of BA parameter set that Peer returned and Self sent.
+ * If it is OK, then admitted. Or we can send DELBA to cancel BA mechanism.
+ */
if (pBaParamSet->field.ba_policy == BA_POLICY_DELAYED) {
- // Since this is a kind of ADDBA failed, we delay next ADDBA process.
+ /* Since this is a kind of ADDBA failed, we delay next ADDBA process. */
pTS->add_ba_req_delayed = true;
DeActivateBAEntry(ieee, pAdmittedBA);
ReasonCode = DELBA_REASON_END_BA;
@@ -503,9 +507,9 @@ int ieee80211_rx_ADDBARsp(struct ieee80211_device *ieee, struct sk_buff *skb)
}
- //
- // Admitted condition
- //
+ /*
+ * Admitted condition
+ */
pAdmittedBA->dialog_token = *pDialogToken;
pAdmittedBA->timeout_value = *pBaTimeoutVal;
pAdmittedBA->start_seq_ctrl = pPendingBA->start_seq_ctrl;
@@ -513,11 +517,11 @@ int ieee80211_rx_ADDBARsp(struct ieee80211_device *ieee, struct sk_buff *skb)
DeActivateBAEntry(ieee, pAdmittedBA);
ActivateBAEntry(ieee, pAdmittedBA, *pBaTimeoutVal);
} else {
- // Delay next ADDBA process.
+ /* Delay next ADDBA process. */
pTS->add_ba_req_delayed = true;
}
- // End of procedure
+ /* End of procedure */
return 0;
OnADDBARsp_Reject:
@@ -600,9 +604,9 @@ int ieee80211_rx_DELBA(struct ieee80211_device *ieee, struct sk_buff *skb)
return 0;
}
-//
-// ADDBA initiate. This can only be called by TX side.
-//
+/*
+ * ADDBA initiate. This can only be called by TX side.
+ */
void
TsInitAddBA(
struct ieee80211_device *ieee,
@@ -616,17 +620,17 @@ TsInitAddBA(
if (pBA->valid && !bOverwritePending)
return;
- // Set parameters to "Pending" variable set
+ /* Set parameters to "Pending" variable set */
DeActivateBAEntry(ieee, pBA);
- pBA->dialog_token++; // DialogToken: Only keep the latest dialog token
- pBA->param_set.field.amsdu_support = 0; // Do not support A-MSDU with A-MPDU now!!
- pBA->param_set.field.ba_policy = Policy; // Policy: Delayed or Immediate
- pBA->param_set.field.tid = pTS->ts_common_info.t_spec.ts_info.uc_tsid; // TID
- // buffer_size: This need to be set according to A-MPDU vector
- pBA->param_set.field.buffer_size = 32; // buffer_size: This need to be set according to A-MPDU vector
- pBA->timeout_value = 0; // Timeout value: Set 0 to disable Timer
- pBA->start_seq_ctrl.field.seq_num = (pTS->tx_cur_seq + 3) % 4096; // Block Ack will start after 3 packets later.
+ pBA->dialog_token++; /* DialogToken: Only keep the latest dialog token */
+ pBA->param_set.field.amsdu_support = 0; /* Do not support A-MSDU with A-MPDU now!! */
+ pBA->param_set.field.ba_policy = Policy; /* Policy: Delayed or Immediate */
+ pBA->param_set.field.tid = pTS->ts_common_info.t_spec.ts_info.uc_tsid; /* TID */
+ /* buffer_size: This need to be set according to A-MPDU vector */
+ pBA->param_set.field.buffer_size = 32; /* buffer_size: This need to be set according to A-MPDU vector */
+ pBA->timeout_value = 0; /* Timeout value: Set 0 to disable Timer */
+ pBA->start_seq_ctrl.field.seq_num = (pTS->tx_cur_seq + 3) % 4096; /* Block Ack will start after 3 packets later. */
ActivateBAEntry(ieee, pBA, BA_SETUP_TIMEOUT);
diff --git a/drivers/staging/rtl8192u/ieee80211/rtl819x_HT.h b/drivers/staging/rtl8192u/ieee80211/rtl819x_HT.h
index b7769bca9740..5691de03e740 100644
--- a/drivers/staging/rtl8192u/ieee80211/rtl819x_HT.h
+++ b/drivers/staging/rtl8192u/ieee80211/rtl819x_HT.h
@@ -38,7 +38,7 @@ enum ht_extension_chan_offset {
};
struct ht_capability_ele {
- //HT capability info
+ /* HT capability info */
u8 AdvCoding:1;
u8 ChlWidth:1;
u8 MimoPwrSave:2;
@@ -54,21 +54,21 @@ struct ht_capability_ele {
u8 Rsvd1:1;
u8 LSigTxopProtect:1;
- //MAC HT parameters info
+ /* MAC HT parameters info */
u8 MaxRxAMPDUFactor:2;
u8 MPDUDensity:3;
u8 Rsvd2:3;
- //Supported MCS set
+ /* Supported MCS set */
u8 MCS[16];
- //Extended HT Capability Info
+ /* Extended HT Capability Info */
u16 ExtHTCapInfo;
- //TXBF Capabilities
+ /* TXBF Capabilities */
u8 TxBFCap[4];
- //Antenna Selection Capabilities
+ /* Antenna Selection Capabilities */
u8 ASCap;
} __packed;
@@ -124,49 +124,49 @@ typedef struct _RT_HIGH_THROUGHPUT {
u8 bEnableHT;
u8 bCurrentHTSupport;
- u8 bRegBW40MHz; // Tx 40MHz channel capability
- u8 bCurBW40MHz; // Tx 40MHz channel capability
+ u8 bRegBW40MHz; /* Tx 40MHz channel capability */
+ u8 bCurBW40MHz; /* Tx 40MHz channel capability */
- u8 bRegShortGI40MHz; // Tx Short GI for 40Mhz
- u8 bCurShortGI40MHz; // Tx Short GI for 40MHz
+ u8 bRegShortGI40MHz; /* Tx Short GI for 40Mhz */
+ u8 bCurShortGI40MHz; /* Tx Short GI for 40MHz */
- u8 bRegShortGI20MHz; // Tx Short GI for 20MHz
- u8 bCurShortGI20MHz; // Tx Short GI for 20MHz
+ u8 bRegShortGI20MHz; /* Tx Short GI for 20MHz */
+ u8 bCurShortGI20MHz; /* Tx Short GI for 20MHz */
- u8 bRegSuppCCK; // Tx CCK rate capability
- u8 bCurSuppCCK; // Tx CCK rate capability
+ u8 bRegSuppCCK; /* Tx CCK rate capability */
+ u8 bCurSuppCCK; /* Tx CCK rate capability */
- // 802.11n spec version for "peer"
+ /* 802.11n spec version for "peer" */
HT_SPEC_VER ePeerHTSpecVer;
- // HT related information for "Self"
- struct ht_capability_ele SelfHTCap; // This is HT cap element sent to peer STA, which also indicate HT Rx capabilities.
- HT_INFORMATION_ELE SelfHTInfo; // This is HT info element sent to peer STA, which also indicate HT Rx capabilities.
+ /* HT related information for "Self" */
+ struct ht_capability_ele SelfHTCap; /* This is HT cap element sent to peer STA, which also indicate HT Rx capabilities. */
+ HT_INFORMATION_ELE SelfHTInfo; /* This is HT info element sent to peer STA, which also indicate HT Rx capabilities. */
- // HT related information for "Peer"
+ /* HT related information for "Peer" */
u8 PeerHTCapBuf[32];
u8 PeerHTInfoBuf[32];
- // A-MSDU related
- u8 bAMSDU_Support; // This indicates Tx A-MSDU capability
- u16 nAMSDU_MaxSize; // This indicates Tx A-MSDU capability
- u8 bCurrent_AMSDU_Support; // This indicates Tx A-MSDU capability
- u16 nCurrent_AMSDU_MaxSize; // This indicates Tx A-MSDU capability
-
- // AMPDU related <2006.08.10 Emily>
- u8 bAMPDUEnable; // This indicate Tx A-MPDU capability
- u8 bCurrentAMPDUEnable; // This indicate Tx A-MPDU capability
- u8 AMPDU_Factor; // This indicate Tx A-MPDU capability
- u8 CurrentAMPDUFactor; // This indicate Tx A-MPDU capability
- u8 MPDU_Density; // This indicate Tx A-MPDU capability
- u8 CurrentMPDUDensity; // This indicate Tx A-MPDU capability
-
- // Forced A-MPDU enable
+ /* A-MSDU related */
+ u8 bAMSDU_Support; /* This indicates Tx A-MSDU capability */
+ u16 nAMSDU_MaxSize; /* This indicates Tx A-MSDU capability */
+ u8 bCurrent_AMSDU_Support; /* This indicates Tx A-MSDU capability */
+ u16 nCurrent_AMSDU_MaxSize; /* This indicates Tx A-MSDU capability */
+
+ /* AMPDU related <2006.08.10 Emily> */
+ u8 bAMPDUEnable; /* This indicate Tx A-MPDU capability */
+ u8 bCurrentAMPDUEnable; /* This indicate Tx A-MPDU capability */
+ u8 AMPDU_Factor; /* This indicate Tx A-MPDU capability */
+ u8 CurrentAMPDUFactor; /* This indicate Tx A-MPDU capability */
+ u8 MPDU_Density; /* This indicate Tx A-MPDU capability */
+ u8 CurrentMPDUDensity; /* This indicate Tx A-MPDU capability */
+
+ /* Forced A-MPDU enable */
HT_AGGRE_MODE_E ForcedAMPDUMode;
u8 ForcedAMPDUFactor;
u8 ForcedMPDUDensity;
- // Forced A-MSDU enable
+ /* Forced A-MSDU enable */
HT_AGGRE_MODE_E ForcedAMSDUMode;
u16 ForcedAMSDUMaxSize;
@@ -174,27 +174,27 @@ typedef struct _RT_HIGH_THROUGHPUT {
u8 CurrentOpMode;
- // MIMO PS related
+ /* MIMO PS related */
u8 SelfMimoPs;
u8 PeerMimoPs;
- // 40MHz Channel Offset settings.
+ /* 40MHz Channel Offset settings. */
enum ht_extension_chan_offset CurSTAExtChnlOffset;
- u8 bCurTxBW40MHz; // If we use 40 MHz to Tx
+ u8 bCurTxBW40MHz; /* If we use 40 MHz to Tx */
u8 PeerBandwidth;
- // For Bandwidth Switching
+ /* For Bandwidth Switching */
u8 bSwBwInProgress;
u8 SwBwStep;
//struct timer_list SwBwTimer; //moved to ieee80211_device. as timer_list need include some header file here.
- // For Realtek proprietary A-MPDU factor for aggregation
+ /* For Realtek proprietary A-MPDU factor for aggregation */
u8 bRegRT2RTAggregation;
u8 bCurrentRT2RTAggregation;
u8 bCurrentRT2RTLongSlotTime;
u8 szRT2RTAggBuffer[10];
- // Rx Reorder control
+ /* Rx Reorder control */
u8 bRegRxReorderEnable;
u8 bCurRxReorderEnable;
u8 RxReorderWinSize;
@@ -211,10 +211,10 @@ typedef struct _RT_HIGH_THROUGHPUT {
u8 UsbRxFwAggrTimeout;
#endif
- // Add for Broadcom(Linksys) IOT. Joseph
+ /* Add for Broadcom(Linksys) IOT. Joseph */
u8 bIsPeerBcm;
- // For IOT issue.
+ /* For IOT issue. */
u8 IOTPeer;
u32 IOTAction;
} __attribute__ ((packed)) RT_HIGH_THROUGHPUT, *PRT_HIGH_THROUGHPUT;
@@ -226,7 +226,7 @@ typedef struct _RT_HIGH_THROUGHPUT {
typedef struct _BSS_HT {
u8 bdSupportHT;
- // HT related elements
+ /* HT related elements */
u8 bdHTCapBuf[32];
u16 bdHTCapLen;
u8 bdHTInfoBuf[32];
@@ -258,9 +258,9 @@ extern u8 MCS_FILTER_1SS[16];
(LegacyRate) :\
(PICK_RATE(LegacyRate, HTRate))
-// MCS Bw 40 {1~7, 12~15,32}
+/* MCS Bw 40 {1~7, 12~15,32} */
#define RATE_ADPT_1SS_MASK 0xFF
-#define RATE_ADPT_2SS_MASK 0xF0 //Skip MCS8~11 because mcs7 > mcs6, 9, 10, 11. 2007.01.16 by Emily
+#define RATE_ADPT_2SS_MASK 0xF0 /* Skip MCS8~11 because mcs7 > mcs6, 9, 10, 11. 2007.01.16 by Emily */
#define RATE_ADPT_MCS32_MASK 0x01
#define IS_11N_MCS_RATE(rate) (rate & 0x80)
@@ -300,4 +300,4 @@ typedef enum _HT_IOT_ACTION {
HT_IOT_ACT_FORCED_CTS2SELF = 0x00000200,
}HT_IOT_ACTION_E, *PHT_IOT_ACTION_E;
-#endif //_RTL819XU_HTTYPE_H_
+#endif /* _RTL819XU_HTTYPE_H_ */
diff --git a/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c b/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c
index c73a8058cf87..4359d6f5735c 100644
--- a/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c
+++ b/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c
@@ -15,29 +15,29 @@ u16 MCS_DATA_RATE[2][2][77] = {
39, 78, 117, 234, 312, 351, 390, 52, 104, 156, 208, 312, 416, 468, 520,
0, 78, 104, 130, 117, 156, 195, 104, 130, 130, 156, 182, 182, 208, 156, 195,
195, 234, 273, 273, 312, 130, 156, 181, 156, 181, 208, 234, 208, 234, 260, 260,
- 286, 195, 234, 273, 234, 273, 312, 351, 312, 351, 390, 390, 429}, // Long GI, 20MHz
+ 286, 195, 234, 273, 234, 273, 312, 351, 312, 351, 390, 390, 429}, /* Long GI, 20MHz */
{14, 29, 43, 58, 87, 116, 130, 144, 29, 58, 87, 116, 173, 231, 260, 289,
43, 87, 130, 173, 260, 347, 390, 433, 58, 116, 173, 231, 347, 462, 520, 578,
0, 87, 116, 144, 130, 173, 217, 116, 144, 144, 173, 202, 202, 231, 173, 217,
217, 260, 303, 303, 347, 144, 173, 202, 173, 202, 231, 260, 231, 260, 289, 289,
- 318, 217, 260, 303, 260, 303, 347, 390, 347, 390, 433, 433, 477} }, // Short GI, 20MHz
+ 318, 217, 260, 303, 260, 303, 347, 390, 347, 390, 433, 433, 477} }, /* Short GI, 20MHz */
{ {27, 54, 81, 108, 162, 216, 243, 270, 54, 108, 162, 216, 324, 432, 486, 540,
81, 162, 243, 324, 486, 648, 729, 810, 108, 216, 324, 432, 648, 864, 972, 1080,
12, 162, 216, 270, 243, 324, 405, 216, 270, 270, 324, 378, 378, 432, 324, 405,
405, 486, 567, 567, 648, 270, 324, 378, 324, 378, 432, 486, 432, 486, 540, 540,
- 594, 405, 486, 567, 486, 567, 648, 729, 648, 729, 810, 810, 891}, // Long GI, 40MHz
+ 594, 405, 486, 567, 486, 567, 648, 729, 648, 729, 810, 810, 891}, /* Long GI, 40MHz */
{30, 60, 90, 120, 180, 240, 270, 300, 60, 120, 180, 240, 360, 480, 540, 600,
90, 180, 270, 360, 540, 720, 810, 900, 120, 240, 360, 480, 720, 960, 1080, 1200,
13, 180, 240, 300, 270, 360, 450, 240, 300, 300, 360, 420, 420, 480, 360, 450,
450, 540, 630, 630, 720, 300, 360, 420, 360, 420, 480, 540, 480, 540, 600, 600,
- 660, 450, 540, 630, 540, 630, 720, 810, 720, 810, 900, 900, 990} } // Short GI, 40MHz
+ 660, 450, 540, 630, 540, 630, 720, 810, 720, 810, 900, 900, 990} } /* Short GI, 40MHz */
};
static u8 UNKNOWN_BORADCOM[3] = {0x00, 0x14, 0xbf};
static u8 LINKSYSWRT330_LINKSYSWRT300_BROADCOM[3] = {0x00, 0x1a, 0x70};
static u8 LINKSYSWRT350_LINKSYSWRT150_BROADCOM[3] = {0x00, 0x1d, 0x7e};
static u8 NETGEAR834Bv2_BROADCOM[3] = {0x00, 0x1b, 0x2f};
-static u8 BELKINF5D8233V1_RALINK[3] = {0x00, 0x17, 0x3f}; //cosa 03202008
+static u8 BELKINF5D8233V1_RALINK[3] = {0x00, 0x17, 0x3f}; /* cosa 03202008 */
static u8 BELKINF5D82334V3_RALINK[3] = {0x00, 0x1c, 0xdf};
static u8 PCI_RALINK[3] = {0x00, 0x90, 0xcc};
static u8 EDIMAX_RALINK[3] = {0x00, 0x0e, 0x2e};
@@ -63,47 +63,47 @@ void HTUpdateDefaultSetting(struct ieee80211_device *ieee)
//printk("pHTinfo:%p, &pHTinfo:%p, mptr:%p, offsetof:%x\n", pHTInfo, &pHTInfo, __mptr, offsetof(struct ieee80211_device, pHTInfo));
//printk("===>ieee:%p,\n", ieee);
- // ShortGI support
+ /* ShortGI support */
pHTInfo->bRegShortGI20MHz = 1;
pHTInfo->bRegShortGI40MHz = 1;
- // 40MHz channel support
+ /* 40MHz channel support */
pHTInfo->bRegBW40MHz = 1;
- // CCK rate support in 40MHz channel
+ /* CCK rate support in 40MHz channel */
if (pHTInfo->bRegBW40MHz)
pHTInfo->bRegSuppCCK = 1;
else
pHTInfo->bRegSuppCCK = true;
- // AMSDU related
+ /* AMSDU related */
pHTInfo->nAMSDU_MaxSize = 7935UL;
pHTInfo->bAMSDU_Support = 0;
- // AMPDU related
+ /* AMPDU related */
pHTInfo->bAMPDUEnable = 1;
- pHTInfo->AMPDU_Factor = 2; //// 0: 2n13(8K), 1:2n14(16K), 2:2n15(32K), 3:2n16(64k)
- pHTInfo->MPDU_Density = 0;// 0: No restriction, 1: 1/8usec, 2: 1/4usec, 3: 1/2usec, 4: 1usec, 5: 2usec, 6: 4usec, 7:8usec
+ pHTInfo->AMPDU_Factor = 2; /* // 0: 2n13(8K), 1:2n14(16K), 2:2n15(32K), 3:2n16(64k) */
+ pHTInfo->MPDU_Density = 0;/* 0: No restriction, 1: 1/8usec, 2: 1/4usec, 3: 1/2usec, 4: 1usec, 5: 2usec, 6: 4usec, 7:8usec */
- // MIMO Power Save
- pHTInfo->SelfMimoPs = 3;// 0: Static Mimo Ps, 1: Dynamic Mimo Ps, 3: No Limitation, 2: Reserved(Set to 3 automatically.)
+ /* MIMO Power Save */
+ pHTInfo->SelfMimoPs = 3;/* 0: Static Mimo Ps, 1: Dynamic Mimo Ps, 3: No Limitation, 2: Reserved(Set to 3 automatically.) */
if (pHTInfo->SelfMimoPs == 2)
pHTInfo->SelfMimoPs = 3;
- // 8190 only. Assign rate operation mode to firmware
+ /* 8190 only. Assign rate operation mode to firmware */
ieee->bTxDisableRateFallBack = 0;
ieee->bTxUseDriverAssingedRate = 0;
#ifdef TO_DO_LIST
- // 8190 only. Assign duration operation mode to firmware
+ /* 8190 only. Assign duration operation mode to firmware */
pMgntInfo->bTxEnableFwCalcDur = (BOOLEAN)pNdisCommon->bRegTxEnableFwCalcDur;
#endif
/*
* 8190 only, Realtek proprietary aggregation mode
* Set MPDUDensity=2, 1: Set MPDUDensity=2(32k) for Realtek AP and set MPDUDensity=0(8k) for others
*/
- pHTInfo->bRegRT2RTAggregation = 1;//0: Set MPDUDensity=2, 1: Set MPDUDensity=2(32k) for Realtek AP and set MPDUDensity=0(8k) for others
+ pHTInfo->bRegRT2RTAggregation = 1;/* 0: Set MPDUDensity=2, 1: Set MPDUDensity=2(32k) for Realtek AP and set MPDUDensity=0(8k) for others */
- // For Rx Reorder Control
+ /* For Rx Reorder Control */
pHTInfo->bRegRxReorderEnable = 1;
pHTInfo->RxReorderWinSize = 64;
pHTInfo->RxReorderPendingTime = 30;
@@ -115,7 +115,7 @@ void HTUpdateDefaultSetting(struct ieee80211_device *ieee)
pHTInfo->UsbRxFwAggrEn = 1;
pHTInfo->UsbRxFwAggrPageNum = 24;
pHTInfo->UsbRxFwAggrPacketNum = 8;
- pHTInfo->UsbRxFwAggrTimeout = 16; ////usb rx FW aggregation timeout threshold.It's in units of 64us
+ pHTInfo->UsbRxFwAggrTimeout = 16; /* usb rx FW aggregation timeout threshold.It's in units of 64us */
#endif
}
@@ -130,11 +130,11 @@ void HTUpdateDefaultSetting(struct ieee80211_device *ieee)
*/
void HTDebugHTCapability(u8 *CapIE, u8 *TitleString)
{
- static u8 EWC11NHTCap[] = {0x00, 0x90, 0x4c, 0x33}; // For 11n EWC definition, 2007.07.17, by Emily
+ static u8 EWC11NHTCap[] = {0x00, 0x90, 0x4c, 0x33}; /* For 11n EWC definition, 2007.07.17, by Emily */
struct ht_capability_ele *pCapELE;
if (!memcmp(CapIE, EWC11NHTCap, sizeof(EWC11NHTCap))) {
- //EWC IE
+ /* EWC IE */
IEEE80211_DEBUG(IEEE80211_DL_HT, "EWC IE in %s()\n", __func__);
pCapELE = (struct ht_capability_ele *)(&CapIE[4]);
} else {
@@ -165,11 +165,11 @@ void HTDebugHTCapability(u8 *CapIE, u8 *TitleString)
*/
void HTDebugHTInfo(u8 *InfoIE, u8 *TitleString)
{
- static u8 EWC11NHTInfo[] = {0x00, 0x90, 0x4c, 0x34}; // For 11n EWC definition, 2007.07.17, by Emily
+ static u8 EWC11NHTInfo[] = {0x00, 0x90, 0x4c, 0x34}; /* For 11n EWC definition, 2007.07.17, by Emily */
PHT_INFORMATION_ELE pHTInfoEle;
if (!memcmp(InfoIE, EWC11NHTInfo, sizeof(EWC11NHTInfo))) {
- // Not EWC IE
+ /* Not EWC IE */
IEEE80211_DEBUG(IEEE80211_DL_HT, "EWC IE in %s()\n", __func__);
pHTInfoEle = (PHT_INFORMATION_ELE)(&InfoIE[4]);
} else {
@@ -366,14 +366,14 @@ static bool HTIOTActIsDisableMCS15(struct ieee80211_device *ieee)
bool retValue = false;
#ifdef TODO
- // Apply for 819u only
+ /* Apply for 819u only */
#if (HAL_CODE_BASE == RTL8192)
#if (DEV_BUS_TYPE == USB_INTERFACE)
- // Alway disable MCS15 by Jerry Chang's request.by Emily, 2008.04.15
+ /* Alway disable MCS15 by Jerry Chang's request.by Emily, 2008.04.15 */
retValue = true;
#elif (DEV_BUS_TYPE == PCI_INTERFACE)
- // Enable MCS15 if the peer is Cisco AP. by Emily, 2008.05.12
+ /* Enable MCS15 if the peer is Cisco AP. by Emily, 2008.05.12 */
// if(pBssDesc->bCiscoCapExist)
// retValue = false;
// else
@@ -381,7 +381,7 @@ static bool HTIOTActIsDisableMCS15(struct ieee80211_device *ieee)
#endif
#endif
#endif
- // Jerry Chang suggest that 8190 1x2 does not need to disable MCS15
+ /* Jerry Chang suggest that 8190 1x2 does not need to disable MCS15 */
return retValue;
}
@@ -403,7 +403,7 @@ static bool HTIOTActIsDisableMCSTwoSpatialStream(struct ieee80211_device *ieee,
u8 *PeerMacAddr)
{
#ifdef TODO
- // Apply for 819u only
+ /* Apply for 819u only */
#endif
return false;
}
@@ -433,8 +433,8 @@ static u8 HTIOTActIsMgntUseCCK6M(struct ieee80211_network *network)
{
u8 retValue = 0;
- // 2008/01/25 MH Judeg if we need to use OFDM to sned MGNT frame for broadcom AP.
- // 2008/01/28 MH We must prevent that we select null bssid to link.
+ /* 2008/01/25 MH Judeg if we need to use OFDM to sned MGNT frame for broadcom AP. */
+ /* 2008/01/28 MH We must prevent that we select null bssid to link. */
if (network->broadcom_cap_exist)
retValue = 1;
@@ -484,7 +484,7 @@ void HTConstructCapabilityElement(struct ieee80211_device *ieee, u8 *posHTCap, u
}
memset(posHTCap, 0, *len);
if (pHT->ePeerHTSpecVer == HT_SPEC_VER_EWC) {
- u8 EWC11NHTCap[] = {0x00, 0x90, 0x4c, 0x33}; // For 11n EWC definition, 2007.07.17, by Emily
+ u8 EWC11NHTCap[] = {0x00, 0x90, 0x4c, 0x33}; /* For 11n EWC definition, 2007.07.17, by Emily */
memcpy(posHTCap, EWC11NHTCap, sizeof(EWC11NHTCap));
pCapELE = (struct ht_capability_ele *)&posHTCap[4];
@@ -492,8 +492,8 @@ void HTConstructCapabilityElement(struct ieee80211_device *ieee, u8 *posHTCap, u
pCapELE = (struct ht_capability_ele *)posHTCap;
}
- //HT capability info
- pCapELE->AdvCoding = 0; // This feature is not supported now!!
+ /* HT capability info */
+ pCapELE->AdvCoding = 0; /* This feature is not supported now!! */
if (ieee->GetHalfNmodeSupportByAPsHandler(ieee->dev))
pCapELE->ChlWidth = 0;
else
@@ -501,18 +501,18 @@ void HTConstructCapabilityElement(struct ieee80211_device *ieee, u8 *posHTCap, u
// pCapELE->ChlWidth = (pHT->bRegBW40MHz?1:0);
pCapELE->MimoPwrSave = pHT->SelfMimoPs;
- pCapELE->GreenField = 0; // This feature is not supported now!!
- pCapELE->ShortGI20Mhz = 1; // We can receive Short GI!!
- pCapELE->ShortGI40Mhz = 1; // We can receive Short GI!!
+ pCapELE->GreenField = 0; /* This feature is not supported now!! */
+ pCapELE->ShortGI20Mhz = 1; /* We can receive Short GI!! */
+ pCapELE->ShortGI40Mhz = 1; /* We can receive Short GI!! */
//DbgPrint("TX HT cap/info ele BW=%d SG20=%d SG40=%d\n\r",
//pCapELE->ChlWidth, pCapELE->ShortGI20Mhz, pCapELE->ShortGI40Mhz);
pCapELE->TxSTBC = 1;
pCapELE->RxSTBC = 0;
- pCapELE->DelayBA = 0; // Do not support now!!
+ pCapELE->DelayBA = 0; /* Do not support now!! */
pCapELE->MaxAMSDUSize = (MAX_RECEIVE_BUFFER_SIZE >= 7935) ? 1 : 0;
pCapELE->DssCCk = ((pHT->bRegBW40MHz) ? (pHT->bRegSuppCCK ? 1 : 0) : 0);
- pCapELE->PSMP = 0; // Do not support now!!
- pCapELE->LSigTxopProtect = 0; // Do not support now!!
+ pCapELE->PSMP = 0; /* Do not support now!! */
+ pCapELE->LSigTxopProtect = 0; /* Do not support now!! */
/*
* MAC HT parameters info
@@ -521,14 +521,14 @@ void HTConstructCapabilityElement(struct ieee80211_device *ieee, u8 *posHTCap, u
IEEE80211_DEBUG(IEEE80211_DL_HT, "TX HT cap/info ele BW=%d MaxAMSDUSize:%d DssCCk:%d\n", pCapELE->ChlWidth, pCapELE->MaxAMSDUSize, pCapELE->DssCCk);
if (IsEncrypt) {
- pCapELE->MPDUDensity = 7; // 8us
- pCapELE->MaxRxAMPDUFactor = 2; // 2 is for 32 K and 3 is 64K
+ pCapELE->MPDUDensity = 7; /* 8us */
+ pCapELE->MaxRxAMPDUFactor = 2; /* 2 is for 32 K and 3 is 64K */
} else {
- pCapELE->MaxRxAMPDUFactor = 3; // 2 is for 32 K and 3 is 64K
- pCapELE->MPDUDensity = 0; // no density
+ pCapELE->MaxRxAMPDUFactor = 3; /* 2 is for 32 K and 3 is 64K */
+ pCapELE->MPDUDensity = 0; /* no density */
}
- //Supported MCS set
+ /* Supported MCS set */
memcpy(pCapELE->MCS, ieee->Regdot11HTOperationalRateSet, 16);
if (pHT->IOTAction & HT_IOT_ACT_DISABLE_MCS15)
pCapELE->MCS[1] &= 0x7f;
@@ -550,15 +550,15 @@ void HTConstructCapabilityElement(struct ieee80211_device *ieee, u8 *posHTCap, u
pCapELE->MCS[i] = 0;
}
- //Extended HT Capability Info
+ /* Extended HT Capability Info */
memset(&pCapELE->ExtHTCapInfo, 0, 2);
- //TXBF Capabilities
+ /* TXBF Capabilities */
memset(pCapELE->TxBFCap, 0, 4);
- //Antenna Selection Capabilities
+ /* Antenna Selection Capabilities */
pCapELE->ASCap = 0;
-//add 2 to give space for element ID and len when construct frames
+/* add 2 to give space for element ID and len when construct frames */
if (pHT->ePeerHTSpecVer == HT_SPEC_VER_EWC)
*len = 30 + 2;
else
@@ -597,7 +597,7 @@ void HTConstructInfoElement(struct ieee80211_device *ieee, u8 *posHTInfo, u8 *le
}
memset(posHTInfo, 0, *len);
- if ((ieee->iw_mode == IW_MODE_ADHOC) || (ieee->iw_mode == IW_MODE_MASTER)) { //ap mode is not currently supported
+ if ((ieee->iw_mode == IW_MODE_ADHOC) || (ieee->iw_mode == IW_MODE_MASTER)) { /* ap mode is not currently supported */
pHTInfoEle->ControlChl = ieee->current_network.channel;
pHTInfoEle->ExtChlOffset = ((!pHT->bRegBW40MHz) ? HT_EXTCHNL_OFFSET_NO_EXT :
(ieee->current_network.channel <= 6) ?
@@ -616,9 +616,9 @@ void HTConstructInfoElement(struct ieee80211_device *ieee, u8 *posHTInfo, u8 *le
memset(pHTInfoEle->BasicMSC, 0, 16);
- *len = 22 + 2; //same above
+ *len = 22 + 2; /* same above */
} else {
- //STA should not generate High Throughput Information Element
+ /* STA should not generate High Throughput Information Element */
*len = 0;
}
//IEEE80211_DEBUG_DATA(IEEE80211_DL_DATA | IEEE80211_DL_HT, posHTInfo, *len - 2);
@@ -688,7 +688,7 @@ void HTConstructRT2RTAggElement(struct ieee80211_device *ieee, u8 *posRT2RTAgg,
}
*/
#else
- // Do Nothing
+ /* Do Nothing */
#endif
posRT2RTAgg->Length = 6;
@@ -715,25 +715,25 @@ static u8 HT_PickMCSRate(struct ieee80211_device *ieee, u8 *pOperateMCS)
case IEEE_A:
case IEEE_B:
case IEEE_G:
- //legacy rate routine handled at selectedrate
+ /* legacy rate routine handled at selectedrate */
- //no MCS rate
+ /* no MCS rate */
memset(pOperateMCS, 0, 16);
break;
- case IEEE_N_24G: //assume CCK rate ok
+ case IEEE_N_24G: /* assume CCK rate ok */
case IEEE_N_5G:
- // Legacy part we only use 6, 5.5,2,1 for N_24G and 6 for N_5G.
- // Legacy part shall be handled at SelectRateSet().
+ /* Legacy part we only use 6, 5.5,2,1 for N_24G and 6 for N_5G. */
+ /* Legacy part shall be handled at SelectRateSet(). */
- //HT part
- // TODO: may be different if we have different number of antenna
- pOperateMCS[0] &= RATE_ADPT_1SS_MASK; //support MCS 0~7
+ /* HT part */
+ /* TODO: may be different if we have different number of antenna */
+ pOperateMCS[0] &= RATE_ADPT_1SS_MASK; /* support MCS 0~7 */
pOperateMCS[1] &= RATE_ADPT_2SS_MASK;
pOperateMCS[3] &= RATE_ADPT_MCS32_MASK;
break;
- //should never reach here
+ /* should never reach here */
default:
break;
}
@@ -811,11 +811,11 @@ static u8 HTFilterMCSRate(struct ieee80211_device *ieee, u8 *pSupportMCS,
{
u8 i = 0;
- // filter out operational rate set not supported by AP, the length of it is 16
+ /* filter out operational rate set not supported by AP, the length of it is 16 */
for (i = 0; i <= 15; i++)
pOperateMCS[i] = ieee->Regdot11HTOperationalRateSet[i] & pSupportMCS[i];
- // TODO: adjust our operational rate set according to our channel bandwidth, STBC and Antenna number
+ /* TODO: adjust our operational rate set according to our channel bandwidth, STBC and Antenna number */
/*
* TODO: fill suggested rate adaptive rate index and give firmware info
* using Tx command packet we also shall suggested the first start rate
@@ -823,7 +823,7 @@ static u8 HTFilterMCSRate(struct ieee80211_device *ieee, u8 *pSupportMCS,
*/
HT_PickMCSRate(ieee, pOperateMCS);
- // For RTL819X, if pairwisekey = wep/tkip, we support only MCS0~7.
+ /* For RTL819X, if pairwisekey = wep/tkip, we support only MCS0~7. */
if (ieee->GetHalfNmodeSupportByAPsHandler(ieee->dev))
pOperateMCS[1] = 0;
@@ -845,8 +845,8 @@ void HTOnAssocRsp(struct ieee80211_device *ieee)
u16 nMaxAMSDUSize = 0;
u8 *pMcsFilter = NULL;
- static u8 EWC11NHTCap[] = {0x00, 0x90, 0x4c, 0x33}; // For 11n EWC definition, 2007.07.17, by Emily
- static u8 EWC11NHTInfo[] = {0x00, 0x90, 0x4c, 0x34}; // For 11n EWC definition, 2007.07.17, by Emily
+ static u8 EWC11NHTCap[] = {0x00, 0x90, 0x4c, 0x33}; /* For 11n EWC definition, 2007.07.17, by Emily */
+ static u8 EWC11NHTInfo[] = {0x00, 0x90, 0x4c, 0x34}; /* For 11n EWC definition, 2007.07.17, by Emily */
if (!pHTInfo->bCurrentHTSupport) {
IEEE80211_DEBUG(IEEE80211_DL_ERR,
@@ -860,7 +860,6 @@ void HTOnAssocRsp(struct ieee80211_device *ieee)
// HTDebugHTCapability(pHTInfo->PeerHTCapBuf,"HTOnAssocRsp_wq");
// HTDebugHTInfo(pHTInfo->PeerHTInfoBuf,"HTOnAssocRsp_wq");
- //
if (!memcmp(pHTInfo->PeerHTCapBuf, EWC11NHTCap, sizeof(EWC11NHTCap)))
pPeerHTCap = (struct ht_capability_ele *)(&pHTInfo->PeerHTCapBuf[4]);
else
@@ -871,13 +870,12 @@ void HTOnAssocRsp(struct ieee80211_device *ieee)
else
pPeerHTInfo = (PHT_INFORMATION_ELE)(pHTInfo->PeerHTInfoBuf);
- ////////////////////////////////////////////////////////
- // Configurations:
- ////////////////////////////////////////////////////////
+ /*
+ * Configurations:
+ */
IEEE80211_DEBUG_DATA(IEEE80211_DL_DATA | IEEE80211_DL_HT, pPeerHTCap, sizeof(struct ht_capability_ele));
// IEEE80211_DEBUG_DATA(IEEE80211_DL_DATA|IEEE80211_DL_HT, pPeerHTInfo, sizeof(HT_INFORMATION_ELE));
// Config Supported Channel Width setting
- //
HTSetConnectBwMode(ieee, (enum ht_channel_width)(pPeerHTCap->ChlWidth), (enum ht_extension_chan_offset)(pPeerHTInfo->ExtChlOffset));
pHTInfo->bCurTxBW40MHz = (pPeerHTInfo->RecommemdedTxWidth == 1);
@@ -927,7 +925,7 @@ void HTOnAssocRsp(struct ieee80211_device *ieee)
* By Emily
*/
if (!pHTInfo->bRegRT2RTAggregation) {
- // Decide AMPDU Factor according to protocol handshake
+ /* Decide AMPDU Factor according to protocol handshake */
if (pHTInfo->AMPDU_Factor > pPeerHTCap->MaxRxAMPDUFactor)
pHTInfo->CurrentAMPDUFactor = pPeerHTCap->MaxRxAMPDUFactor;
else
@@ -939,7 +937,7 @@ void HTOnAssocRsp(struct ieee80211_device *ieee)
*/
if (ieee->current_network.bssht.bdRT2RTAggregation) {
if (ieee->pairwise_key_type != KEY_TYPE_NA)
- // Realtek may set 32k in security mode and 64k for others
+ /* Realtek may set 32k in security mode and 64k for others */
pHTInfo->CurrentAMPDUFactor = pPeerHTCap->MaxRxAMPDUFactor;
else
pHTInfo->CurrentAMPDUFactor = HT_AGG_SIZE_64K;
@@ -960,10 +958,10 @@ void HTOnAssocRsp(struct ieee80211_device *ieee)
else
pHTInfo->CurrentMPDUDensity = pPeerHTCap->MPDUDensity;
if (ieee->pairwise_key_type != KEY_TYPE_NA)
- pHTInfo->CurrentMPDUDensity = 7; // 8us
- // Force TX AMSDU
+ pHTInfo->CurrentMPDUDensity = 7; /* 8us */
+ /* Force TX AMSDU */
- // Lanhsin: mark for tmp to avoid deauth by ap from s3
+ /* Lanhsin: mark for tmp to avoid deauth by ap from s3 */
//if(memcmp(pMgntInfo->Bssid, NETGEAR834Bv2_BROADCOM, 3)==0)
if (0) {
pHTInfo->bCurrentAMPDUEnable = false;
@@ -973,7 +971,7 @@ void HTOnAssocRsp(struct ieee80211_device *ieee)
pHTInfo->IOTAction |= HT_IOT_ACT_TX_USE_AMSDU_8K;
}
- // Rx Reorder Setting
+ /* Rx Reorder Setting */
pHTInfo->bCurRxReorderEnable = pHTInfo->bRegRxReorderEnable;
/*
@@ -1000,7 +998,7 @@ void HTOnAssocRsp(struct ieee80211_device *ieee)
pMcsFilter = MCS_FILTER_1SS;
else
pMcsFilter = MCS_FILTER_ALL;
- //WB add for MCS8 bug
+ /* WB add for MCS8 bug */
// pMcsFilter = MCS_FILTER_1SS;
ieee->HTHighestOperaRate = HTGetHighestMCSRate(ieee, ieee->dot11HTOperationalRateSet, pMcsFilter);
ieee->HTCurrentOperaRate = ieee->HTHighestOperaRate;
@@ -1020,7 +1018,7 @@ void HTOnAssocRsp(struct ieee80211_device *ieee)
* * (1) MPInitialization Phase
* * (2) Receiving of Deauthentication from AP
*/
-// TODO: Should this funciton be called when receiving of Disassociation?
+/* TODO: Should this funciton be called when receiving of Disassociation? */
void HTInitializeHTInfo(struct ieee80211_device *ieee)
{
PRT_HIGH_THROUGHPUT pHTInfo = ieee->pHTInfo;
@@ -1031,11 +1029,11 @@ void HTInitializeHTInfo(struct ieee80211_device *ieee)
IEEE80211_DEBUG(IEEE80211_DL_HT, "===========>%s()\n", __func__);
pHTInfo->bCurrentHTSupport = false;
- // 40MHz channel support
+ /* 40MHz channel support */
pHTInfo->bCurBW40MHz = false;
pHTInfo->bCurTxBW40MHz = false;
- // Short GI support
+ /* Short GI support */
pHTInfo->bCurShortGI20MHz = false;
pHTInfo->bCurShortGI40MHz = false;
pHTInfo->bForcedShortGI = false;
@@ -1048,15 +1046,15 @@ void HTInitializeHTInfo(struct ieee80211_device *ieee)
*/
pHTInfo->bCurSuppCCK = true;
- // AMSDU related
+ /* AMSDU related */
pHTInfo->bCurrent_AMSDU_Support = false;
pHTInfo->nCurrent_AMSDU_MaxSize = pHTInfo->nAMSDU_MaxSize;
- // AMPUD related
+ /* AMPUD related */
pHTInfo->CurrentMPDUDensity = pHTInfo->MPDU_Density;
pHTInfo->CurrentAMPDUFactor = pHTInfo->AMPDU_Factor;
- // Initialize all of the parameters related to 11n
+ /* Initialize all of the parameters related to 11n */
memset(&pHTInfo->SelfHTCap, 0, sizeof(pHTInfo->SelfHTCap));
memset(&pHTInfo->SelfHTInfo, 0, sizeof(pHTInfo->SelfHTInfo));
memset(&pHTInfo->PeerHTCapBuf, 0, sizeof(pHTInfo->PeerHTCapBuf));
@@ -1064,22 +1062,22 @@ void HTInitializeHTInfo(struct ieee80211_device *ieee)
pHTInfo->bSwBwInProgress = false;
- // Set default IEEE spec for Draft N
+ /* Set default IEEE spec for Draft N */
pHTInfo->ePeerHTSpecVer = HT_SPEC_VER_IEEE;
- // Realtek proprietary aggregation mode
+ /* Realtek proprietary aggregation mode */
pHTInfo->bCurrentRT2RTAggregation = false;
pHTInfo->bCurrentRT2RTLongSlotTime = false;
pHTInfo->IOTPeer = 0;
pHTInfo->IOTAction = 0;
- //MCS rate initialized here
+ /* MCS rate initialized here */
{
u8 *RegHTSuppRateSets = &ieee->RegHTSuppRateSet[0];
- RegHTSuppRateSets[0] = 0xFF; //support MCS 0~7
- RegHTSuppRateSets[1] = 0xFF; //support MCS 8~15
- RegHTSuppRateSets[4] = 0x01; //support MCS 32
+ RegHTSuppRateSets[0] = 0xFF; /* support MCS 0~7 */
+ RegHTSuppRateSets[1] = 0xFF; /* support MCS 8~15 */
+ RegHTSuppRateSets[4] = 0x01; /* support MCS 32 */
}
}
@@ -1122,9 +1120,9 @@ void HTResetSelfAndSavePeerSetting(struct ieee80211_device *ieee, struct ieee802
// u8* pMcsFilter;
u8 bIOTAction = 0;
- //
- // Save Peer Setting before Association
- //
+ /*
+ * Save Peer Setting before Association
+ */
IEEE80211_DEBUG(IEEE80211_DL_HT, "==============>%s()\n", __func__);
/*unmark bEnableHT flag here is the same reason why unmarked in function ieee80211_softmac_new_net. WB 2008.09.10*/
// if( pHTInfo->bEnableHT && pNetwork->bssht.bdSupportHT)
@@ -1132,14 +1130,14 @@ void HTResetSelfAndSavePeerSetting(struct ieee80211_device *ieee, struct ieee802
pHTInfo->bCurrentHTSupport = true;
pHTInfo->ePeerHTSpecVer = pNetwork->bssht.bdHTSpecVer;
- // Save HTCap and HTInfo information Element
+ /* Save HTCap and HTInfo information Element */
if (pNetwork->bssht.bdHTCapLen > 0 && pNetwork->bssht.bdHTCapLen <= sizeof(pHTInfo->PeerHTCapBuf))
memcpy(pHTInfo->PeerHTCapBuf, pNetwork->bssht.bdHTCapBuf, pNetwork->bssht.bdHTCapLen);
if (pNetwork->bssht.bdHTInfoLen > 0 && pNetwork->bssht.bdHTInfoLen <= sizeof(pHTInfo->PeerHTInfoBuf))
memcpy(pHTInfo->PeerHTInfoBuf, pNetwork->bssht.bdHTInfoBuf, pNetwork->bssht.bdHTInfoLen);
- // Check whether RT to RT aggregation mode is enabled
+ /* Check whether RT to RT aggregation mode is enabled */
if (pHTInfo->bRegRT2RTAggregation) {
pHTInfo->bCurrentRT2RTAggregation = pNetwork->bssht.bdRT2RTAggregation;
pHTInfo->bCurrentRT2RTLongSlotTime = pNetwork->bssht.bdRT2RTLongSlotTime;
@@ -1148,7 +1146,7 @@ void HTResetSelfAndSavePeerSetting(struct ieee80211_device *ieee, struct ieee802
pHTInfo->bCurrentRT2RTLongSlotTime = false;
}
- // Determine the IOT Peer Vendor.
+ /* Determine the IOT Peer Vendor. */
HTIOTPeerDetermine(ieee);
/*
@@ -1261,7 +1259,7 @@ void HTSetConnectBwMode(struct ieee80211_device *ieee, enum ht_channel_width Ban
if (!pHTInfo->bRegBW40MHz)
return;
- // To reduce dummy operation
+ /* To reduce dummy operation */
// if((pHTInfo->bCurBW40MHz==false && Bandwidth==HT_CHANNEL_WIDTH_20) ||
// (pHTInfo->bCurBW40MHz==true && Bandwidth==HT_CHANNEL_WIDTH_20_40 && Offset==pHTInfo->CurSTAExtChnlOffset))
// return;
@@ -1271,9 +1269,9 @@ void HTSetConnectBwMode(struct ieee80211_device *ieee, enum ht_channel_width Ban
// spin_unlock_irqrestore(&(ieee->bw_spinlock), flags);
return;
}
- //if in half N mode, set to 20M bandwidth please 09.08.2008 WB.
+ /* if in half N mode, set to 20M bandwidth please 09.08.2008 WB. */
if (Bandwidth == HT_CHANNEL_WIDTH_20_40 && (!ieee->GetHalfNmodeSupportByAPsHandler(ieee->dev))) {
- // Handle Illegal extension channel offset!!
+ /* Handle Illegal extension channel offset!! */
if (ieee->current_network.channel < 2 && Offset == HT_EXTCHNL_OFFSET_LOWER)
Offset = HT_EXTCHNL_OFFSET_NO_EXT;
if (Offset == HT_EXTCHNL_OFFSET_UPPER || Offset == HT_EXTCHNL_OFFSET_LOWER) {
diff --git a/drivers/staging/rtl8192u/ieee80211/rtl819x_Qos.h b/drivers/staging/rtl8192u/ieee80211/rtl819x_Qos.h
index 3052f53d2e7e..44418a284fe9 100644
--- a/drivers/staging/rtl8192u/ieee80211/rtl819x_Qos.h
+++ b/drivers/staging/rtl8192u/ieee80211/rtl819x_Qos.h
@@ -19,10 +19,10 @@ struct aci_aifsn {
* Ref: WMM spec 2.2.11: WME TSPEC Element, p.18.
*/
enum direction_value {
- DIR_UP = 0, // 0x00 // UpLink
- DIR_DOWN = 1, // 0x01 // DownLink
- DIR_DIRECT = 2, // 0x10 // DirectLink
- DIR_BI_DIR = 3, // 0x11 // Bi-Direction
+ DIR_UP = 0, /* 0x00 UpLink */
+ DIR_DOWN = 1, /* 0x01 DownLink */
+ DIR_DIRECT = 2, /* 0x10 DirectLink */
+ DIR_BI_DIR = 3, /* 0x11 Bi-Direction */
};
/*
@@ -33,15 +33,15 @@ enum direction_value {
* Note: sizeof 3 Bytes
*/
struct qos_tsinfo {
- u16 uc_traffic_type:1; //WMM is reserved
+ u16 uc_traffic_type:1; /* WMM is reserved */
u16 uc_tsid:4;
u16 uc_direction:2;
- u16 uc_access_policy:2; //WMM: bit8=0, bit7=1
- u16 uc_aggregation:1; //WMM is reserved
- u16 uc_psb:1; //WMMSA is APSD
+ u16 uc_access_policy:2; /* WMM: bit8=0, bit7=1 */
+ u16 uc_aggregation:1; /* WMM is reserved */
+ u16 uc_psb:1; /* WMMSA is APSD */
u16 uc_up:3;
- u16 uc_ts_info_ack_policy:2; //WMM is reserved
- u8 uc_schedule:1; //WMM is reserved
+ u16 uc_ts_info_ack_policy:2; /* WMM is reserved */
+ u8 uc_schedule:1; /* WMM is reserved */
u8:7;
};
diff --git a/drivers/staging/rtl8192u/ieee80211/rtl819x_TSProc.c b/drivers/staging/rtl8192u/ieee80211/rtl819x_TSProc.c
index 7cac668bfb0b..469d6ab3dc8e 100644
--- a/drivers/staging/rtl8192u/ieee80211/rtl819x_TSProc.c
+++ b/drivers/staging/rtl8192u/ieee80211/rtl819x_TSProc.c
@@ -6,15 +6,15 @@
static void TsSetupTimeOut(struct timer_list *unused)
{
- // Not implement yet
- // This is used for WMMSA and ACM , that would send ADDTSReq frame.
+ /* Not implement yet */
+ /* This is used for WMMSA and ACM , that would send ADDTSReq frame. */
}
static void TsInactTimeout(struct timer_list *unused)
{
- // Not implement yet
- // This is used for WMMSA and ACM.
- // This function would be call when TS is no Tx/Rx for some period of time.
+ /* Not implement yet */
+ /* This is used for WMMSA and ACM. */
+ /* This function would be call when TS is no Tx/Rx for some period of time. */
}
/********************************************************************************************************************
@@ -38,7 +38,7 @@ static void RxPktPendingTimeout(struct timer_list *t)
spin_lock_irqsave(&(ieee->reorder_spinlock), flags);
IEEE80211_DEBUG(IEEE80211_DL_REORDER, "==================>%s()\n", __func__);
if (pRxTs->rx_timeout_indicate_seq != 0xffff) {
- // Indicate the pending packets sequentially according to SeqNum until meet the gap.
+ /* Indicate the pending packets sequentially according to SeqNum until meet the gap. */
while (!list_empty(&pRxTs->rx_pending_pkt_list)) {
pReorderEntry = list_entry(pRxTs->rx_pending_pkt_list.prev, struct rx_reorder_entry, List);
if (index == 0)
@@ -64,10 +64,10 @@ static void RxPktPendingTimeout(struct timer_list *t)
}
if (index > 0) {
- // Set rx_timeout_indicate_seq to 0xffff to indicate no pending packets in buffer now.
+ /* Set rx_timeout_indicate_seq to 0xffff to indicate no pending packets in buffer now. */
pRxTs->rx_timeout_indicate_seq = 0xffff;
- // Indicate packets
+ /* Indicate packets */
if (index > REORDER_WIN_SIZE) {
IEEE80211_DEBUG(IEEE80211_DL_ERR, "RxReorderIndicatePacket(): Rx Reorder buffer full!! \n");
spin_unlock_irqrestore(&(ieee->reorder_spinlock), flags);
@@ -117,16 +117,16 @@ static void ResetTxTsEntry(struct tx_ts_record *pTS)
pTS->add_ba_req_in_progress = false;
pTS->add_ba_req_delayed = false;
pTS->using_ba = false;
- ResetBaEntry(&pTS->tx_admitted_ba_record); //For BA Originator
+ ResetBaEntry(&pTS->tx_admitted_ba_record); /* For BA Originator */
ResetBaEntry(&pTS->tx_pending_ba_record);
}
static void ResetRxTsEntry(struct rx_ts_record *pTS)
{
ResetTsCommonInfo(&pTS->ts_common_info);
- pTS->rx_indicate_seq = 0xffff; // This indicate the rx_indicate_seq is not used now!!
- pTS->rx_timeout_indicate_seq = 0xffff; // This indicate the rx_timeout_indicate_seq is not used now!!
- ResetBaEntry(&pTS->rx_admitted_ba_record); // For BA Recipient
+ pTS->rx_indicate_seq = 0xffff; /* This indicate the rx_indicate_seq is not used now!! */
+ pTS->rx_timeout_indicate_seq = 0xffff; /* This indicate the rx_timeout_indicate_seq is not used now!! */
+ ResetBaEntry(&pTS->rx_admitted_ba_record); /* For BA Recipient */
}
void TSInitialize(struct ieee80211_device *ieee)
@@ -136,16 +136,15 @@ void TSInitialize(struct ieee80211_device *ieee)
struct rx_reorder_entry *pRxReorderEntry = ieee->RxReorderEntry;
u8 count = 0;
IEEE80211_DEBUG(IEEE80211_DL_TS, "==========>%s()\n", __func__);
- // Initialize Tx TS related info.
+ /* Initialize Tx TS related info. */
INIT_LIST_HEAD(&ieee->Tx_TS_Admit_List);
INIT_LIST_HEAD(&ieee->Tx_TS_Pending_List);
INIT_LIST_HEAD(&ieee->Tx_TS_Unused_List);
for (count = 0; count < TOTAL_TS_NUM; count++) {
- //
pTxTS->num = count;
- // The timers for the operation of Traffic Stream and Block Ack.
- // DLS related timer will be add here in the future!!
+ /* The timers for the operation of Traffic Stream and Block Ack. */
+ /* DLS related timer will be add here in the future!! */
timer_setup(&pTxTS->ts_common_info.setup_timer, TsSetupTimeOut,
0);
timer_setup(&pTxTS->ts_common_info.inact_timer, TsInactTimeout,
@@ -160,7 +159,7 @@ void TSInitialize(struct ieee80211_device *ieee)
pTxTS++;
}
- // Initialize Rx TS related info.
+ /* Initialize Rx TS related info. */
INIT_LIST_HEAD(&ieee->Rx_TS_Admit_List);
INIT_LIST_HEAD(&ieee->Rx_TS_Pending_List);
INIT_LIST_HEAD(&ieee->Rx_TS_Unused_List);
@@ -178,7 +177,7 @@ void TSInitialize(struct ieee80211_device *ieee)
list_add_tail(&pRxTS->ts_common_info.list, &ieee->Rx_TS_Unused_List);
pRxTS++;
}
- // Initialize unused Rx Reorder List.
+ /* Initialize unused Rx Reorder List. */
INIT_LIST_HEAD(&ieee->RxReorder_Unused_List);
//#ifdef TO_DO_LIST
for (count = 0; count < REORDER_ENTRY_NUM; count++) {
@@ -209,9 +208,9 @@ static struct ts_common_info *SearchAdmitTRStream(struct ieee80211_device *ieee,
//DIRECTION_VALUE dir;
u8 dir;
bool search_dir[4] = {0};
- struct list_head *psearch_list; //FIXME
+ struct list_head *psearch_list; /* FIXME */
struct ts_common_info *pRet = NULL;
- if (ieee->iw_mode == IW_MODE_MASTER) { //ap mode
+ if (ieee->iw_mode == IW_MODE_MASTER) { /* ap mode */
if (TxRxSelect == TX_DIR) {
search_dir[DIR_DOWN] = true;
search_dir[DIR_BI_DIR] = true;
@@ -291,15 +290,15 @@ bool GetTs(
struct ts_common_info **ppTS,
u8 *Addr,
u8 TID,
- enum tr_select TxRxSelect, //Rx:1, Tx:0
+ enum tr_select TxRxSelect, /* Rx:1, Tx:0 */
bool bAddNewTs
)
{
u8 UP = 0;
- //
- // We do not build any TS for Broadcast or Multicast stream.
- // So reject these kinds of search here.
- //
+ /*
+ * We do not build any TS for Broadcast or Multicast stream.
+ * So reject these kinds of search here.
+ */
if (is_multicast_ether_addr(Addr)) {
IEEE80211_DEBUG(IEEE80211_DL_ERR, "get TS for Broadcast or Multicast\n");
return false;
@@ -308,7 +307,7 @@ bool GetTs(
if (ieee->current_network.qos_data.supported == 0) {
UP = 0;
} else {
- // In WMM case: we use 4 TID only
+ /* In WMM case: we use 4 TID only */
if (!is_ac_valid(TID)) {
IEEE80211_DEBUG(IEEE80211_DL_ERR, " in %s(), TID(%d) is not valid\n", __func__, TID);
return false;
@@ -349,11 +348,11 @@ bool GetTs(
IEEE80211_DEBUG(IEEE80211_DL_TS, "add new TS failed(tid:%d)\n", UP);
return false;
} else {
- //
- // Create a new Traffic stream for current Tx/Rx
- // This is for EDCA and WMM to add a new TS.
- // For HCCA or WMMSA, TS cannot be addmit without negotiation.
- //
+ /*
+ * Create a new Traffic stream for current Tx/Rx
+ * This is for EDCA and WMM to add a new TS.
+ * For HCCA or WMMSA, TS cannot be addmit without negotiation.
+ */
struct tspec_body TSpec;
struct qos_tsinfo *pTSInfo = &TSpec.ts_info;
struct list_head *pUnusedList =
@@ -382,21 +381,21 @@ bool GetTs(
}
IEEE80211_DEBUG(IEEE80211_DL_TS, "to init current TS, UP:%d, Dir:%d, addr:%pM\n", UP, Dir, Addr);
- // Prepare TS Info releated field
- pTSInfo->uc_traffic_type = 0; // Traffic type: WMM is reserved in this field
- pTSInfo->uc_tsid = UP; // TSID
- pTSInfo->uc_direction = Dir; // Direction: if there is DirectLink, this need additional consideration.
- pTSInfo->uc_access_policy = 1; // Access policy
- pTSInfo->uc_aggregation = 0; // Aggregation
- pTSInfo->uc_psb = 0; // Aggregation
- pTSInfo->uc_up = UP; // User priority
- pTSInfo->uc_ts_info_ack_policy = 0; // Ack policy
- pTSInfo->uc_schedule = 0; // Schedule
+ /* Prepare TS Info releated field */
+ pTSInfo->uc_traffic_type = 0; /* Traffic type: WMM is reserved in this field */
+ pTSInfo->uc_tsid = UP; /* TSID */
+ pTSInfo->uc_direction = Dir; /* Direction: if there is DirectLink, this need additional consideration. */
+ pTSInfo->uc_access_policy = 1; /* Access policy */
+ pTSInfo->uc_aggregation = 0; /* Aggregation */
+ pTSInfo->uc_psb = 0; /* Aggregation */
+ pTSInfo->uc_up = UP; /* User priority */
+ pTSInfo->uc_ts_info_ack_policy = 0; /* Ack policy */
+ pTSInfo->uc_schedule = 0; /* Schedule */
MakeTSEntry(*ppTS, Addr, &TSpec, NULL, 0, 0);
AdmitTS(ieee, *ppTS, 0);
list_add_tail(&((*ppTS)->list), pAddmitList);
- // if there is DirectLink, we need to do additional operation here!!
+ /* if there is DirectLink, we need to do additional operation here!! */
return true;
} else {
@@ -530,7 +529,7 @@ void TsStartAddBaProcess(struct ieee80211_device *ieee, struct tx_ts_record *pTx
jiffies + msecs_to_jiffies(TS_ADDBA_DELAY));
} else {
IEEE80211_DEBUG(IEEE80211_DL_BA, "TsStartAddBaProcess(): Immediately Start ADDBA now!!\n");
- mod_timer(&pTxTS->ts_add_ba_timer, jiffies+10); //set 10 ticks
+ mod_timer(&pTxTS->ts_add_ba_timer, jiffies+10); /* set 10 ticks */
}
} else {
IEEE80211_DEBUG(IEEE80211_DL_ERR, "%s()==>BA timer is already added\n", __func__);
diff --git a/drivers/staging/rtl8192u/r8180_93cx6.c b/drivers/staging/rtl8192u/r8180_93cx6.c
index de83daa0c9ed..e76f1b2ea2e0 100644
--- a/drivers/staging/rtl8192u/r8180_93cx6.c
+++ b/drivers/staging/rtl8192u/r8180_93cx6.c
@@ -154,7 +154,8 @@ int eprom_read(struct net_device *dev, u32 addr)
eprom_w(dev, 0);
for (i = 0; i < 16; i++) {
- /* eeprom needs a clk cycle between writing opcode&adr
+ /*
+ * eeprom needs a clk cycle between writing opcode&adr
* and reading data. (eeprom outs a dummy 0)
*/
eprom_ck_cycle(dev);
diff --git a/drivers/staging/rtl8192u/r8180_93cx6.h b/drivers/staging/rtl8192u/r8180_93cx6.h
index 0cdd00a4f7b8..3dc3cdb2194e 100644
--- a/drivers/staging/rtl8192u/r8180_93cx6.h
+++ b/drivers/staging/rtl8192u/r8180_93cx6.h
@@ -14,8 +14,8 @@
* project Authors.
*/
-/*This files contains card eeprom (93c46 or 93c56) programming routines*/
-/*memory is addressed by WORDS*/
+/* This files contains card eeprom (93c46 or 93c56) programming routines */
+/* memory is addressed by WORDS */
#include "r8192U.h"
#include "r8192U_hw.h"
diff --git a/drivers/staging/rtl8192u/r8190_rtl8256.c b/drivers/staging/rtl8192u/r8190_rtl8256.c
index 92de92a3325a..716be24bace6 100644
--- a/drivers/staging/rtl8192u/r8190_rtl8256.c
+++ b/drivers/staging/rtl8192u/r8190_rtl8256.c
@@ -19,14 +19,15 @@
*/
static void phy_rf8256_config_para_file(struct net_device *dev);
-/*--------------------------------------------------------------------------
+/*
+ * --------------------------------------------------------------------------
* Overview: set RF band width (20M or 40M)
* Input: struct net_device* dev
* WIRELESS_BANDWIDTH_E Bandwidth //20M or 40M
* Output: NONE
* Return: NONE
* Note: 8226 support both 20M and 40 MHz
- *--------------------------------------------------------------------------
+ * --------------------------------------------------------------------------
*/
void phy_set_rf8256_bandwidth(struct net_device *dev, enum ht_channel_width Bandwidth)
{
@@ -83,17 +84,19 @@ void phy_set_rf8256_bandwidth(struct net_device *dev, enum ht_channel_width Band
}
}
}
-/*--------------------------------------------------------------------------
+/*
+ * --------------------------------------------------------------------------
* Overview: Interface to config 8256
* Input: struct net_device* dev
* Output: NONE
* Return: NONE
- *--------------------------------------------------------------------------
+ * --------------------------------------------------------------------------
*/
void phy_rf8256_config(struct net_device *dev)
{
struct r8192_priv *priv = ieee80211_priv(dev);
- /* Initialize general global value
+ /*
+ * Initialize general global value
*
* TODO: Extend RF_PATH_C and RF_PATH_D in the future
*/
@@ -101,12 +104,13 @@ void phy_rf8256_config(struct net_device *dev)
/* Config BB and RF */
phy_rf8256_config_para_file(dev);
}
-/*--------------------------------------------------------------------------
+/*
+ * --------------------------------------------------------------------------
* Overview: Interface to config 8256
* Input: struct net_device* dev
* Output: NONE
* Return: NONE
- *--------------------------------------------------------------------------
+ * --------------------------------------------------------------------------
*/
static void phy_rf8256_config_para_file(struct net_device *dev)
{
@@ -126,7 +130,8 @@ static void phy_rf8256_config_para_file(struct net_device *dev)
pPhyReg = &priv->PHYRegDef[eRFPath];
- /* Joseph test for shorten RF config
+ /*
+ * Joseph test for shorten RF config
* pHalData->RfReg0Value[eRFPath] = rtl8192_phy_QueryRFReg(dev, (enum rf90_radio_path_e)eRFPath, rGlobalCtrl, bMaskDWord);
* ----Store original RFENV control type
*/
@@ -153,7 +158,8 @@ static void phy_rf8256_config_para_file(struct net_device *dev)
rtl8192_phy_SetRFReg(dev, (enum rf90_radio_path_e) eRFPath, 0x0, bMask12Bits, 0xbf);
- /* Check RF block (for FPGA platform only)----
+ /*
+ * Check RF block (for FPGA platform only)----
* TODO: this function should be removed on ASIC , Emily 2007.2.2
*/
if (rtl8192_phy_checkBBAndRF(dev, HW90_BLOCK_RF, (enum rf90_radio_path_e)eRFPath)) {
@@ -163,7 +169,7 @@ static void phy_rf8256_config_para_file(struct net_device *dev)
RetryTimes = ConstRetryTimes;
RF3_Final_Value = 0;
- /*----Initialize RF fom connfiguration file----*/
+ /* ----Initialize RF fom connfiguration file---- */
switch (eRFPath) {
case RF90_PATH_A:
while (RF3_Final_Value != RegValueToBeCheck && RetryTimes != 0) {
@@ -199,7 +205,7 @@ static void phy_rf8256_config_para_file(struct net_device *dev)
break;
}
- /*----Restore RFENV control type----*/
+ /* ----Restore RFENV control type---- */
switch (eRFPath) {
case RF90_PATH_A:
case RF90_PATH_C:
@@ -283,8 +289,9 @@ void phy_set_rf8256_ofdm_tx_power(struct net_device *dev, u8 powerlevel)
}
if (priv->bDynamicTxHighPower) {
- /*Add by Jacken 2008/03/06
- *Emily, 20080613. Set low tx power for both MCS and legacy OFDM
+ /*
+ * Add by Jacken 2008/03/06
+ * Emily, 20080613. Set low tx power for both MCS and legacy OFDM
*/
writeVal = 0x03030303;
} else {
diff --git a/drivers/staging/rtl8192u/r8192U.h b/drivers/staging/rtl8192u/r8192U.h
index ec33fb9122e9..610c23364e58 100644
--- a/drivers/staging/rtl8192u/r8192U.h
+++ b/drivers/staging/rtl8192u/r8192U.h
@@ -570,7 +570,8 @@ typedef struct Stats {
long signal_strength;
long signal_quality;
long last_signal_strength_inpercent;
- /* Correct smoothed ss in dbm, only used in driver
+ /*
+ * Correct smoothed ss in dbm, only used in driver
* to report real power now
*/
long recv_signal_power;
@@ -615,38 +616,46 @@ typedef struct _BB_REGISTER_DEFINITION {
u32 rfLSSI_Select;
/* Tx gain stage: 0x80c~0x80f [4 bytes] */
u32 rfTxGainStage;
- /* wire parameter control1: 0x820~0x823, 0x828~0x82b,
+ /*
+ * wire parameter control1: 0x820~0x823, 0x828~0x82b,
* 0x830~0x833, 0x838~0x83b [16 bytes]
*/
u32 rfHSSIPara1;
- /* wire parameter control2: 0x824~0x827, 0x82c~0x82f,
+ /*
+ * wire parameter control2: 0x824~0x827, 0x82c~0x82f,
* 0x834~0x837, 0x83c~0x83f [16 bytes]
*/
u32 rfHSSIPara2;
/* Tx Rx antenna control: 0x858~0x85f [16 bytes] */
u32 rfSwitchControl;
- /* AGC parameter control1: 0xc50~0xc53, 0xc58~0xc5b,
+ /*
+ * AGC parameter control1: 0xc50~0xc53, 0xc58~0xc5b,
* 0xc60~0xc63, 0xc68~0xc6b [16 bytes]
*/
u32 rfAGCControl1;
- /* AGC parameter control2: 0xc54~0xc57, 0xc5c~0xc5f,
+ /*
+ * AGC parameter control2: 0xc54~0xc57, 0xc5c~0xc5f,
* 0xc64~0xc67, 0xc6c~0xc6f [16 bytes]
*/
u32 rfAGCControl2;
- /* OFDM Rx IQ imbalance matrix: 0xc14~0xc17, 0xc1c~0xc1f,
+ /*
+ * OFDM Rx IQ imbalance matrix: 0xc14~0xc17, 0xc1c~0xc1f,
* 0xc24~0xc27, 0xc2c~0xc2f [16 bytes]
*/
u32 rfRxIQImbalance;
- /* Rx IQ DC offset and Rx digital filter, Rx DC notch filter:
+ /*
+ * Rx IQ DC offset and Rx digital filter, Rx DC notch filter:
* 0xc10~0xc13, 0xc18~0xc1b,
* 0xc20~0xc23, 0xc28~0xc2b [16 bytes]
*/
u32 rfRxAFE;
- /* OFDM Tx IQ imbalance matrix: 0xc80~0xc83, 0xc88~0xc8b,
+ /*
+ * OFDM Tx IQ imbalance matrix: 0xc80~0xc83, 0xc88~0xc8b,
* 0xc90~0xc93, 0xc98~0xc9b [16 bytes]
*/
u32 rfTxIQImbalance;
- /* Tx IQ DC Offset and Tx DFIR type:
+ /*
+ * Tx IQ DC Offset and Tx DFIR type:
* 0xc84~0xc87, 0xc8c~0xc8f,
* 0xc94~0xc97, 0xc9c~0xc9f [16 bytes]
*/
@@ -733,7 +742,8 @@ typedef struct _phy_ofdm_rx_status_report_819xusb {
} phy_sts_ofdm_819xusb_t;
typedef struct _phy_cck_rx_status_report_819xusb {
- /* For CCK rate descriptor. This is an unsigned 8:1 variable.
+ /*
+ * For CCK rate descriptor. This is an unsigned 8:1 variable.
* LSB bit presend 0.5. And MSB 7 bts presend a signed value.
* Range from -64~+63.5.
*/
@@ -800,12 +810,12 @@ typedef enum _tag_TxCmd_Config_Index {
} DCMD_TXCMD_OP;
enum version_819xu {
- VERSION_819XU_A, // A-cut
- VERSION_819XU_B, // B-cut
- VERSION_819XU_C,// C-cut
+ VERSION_819XU_A, /* A-cut */
+ VERSION_819XU_B, /* B-cut */
+ VERSION_819XU_C,/* C-cut */
};
-//added for different RF type
+/* added for different RF type */
enum rt_rf_type {
RF_1T2R = 0,
RF_2T4R,
@@ -958,7 +968,8 @@ typedef struct r8192_priv {
/* 8190 40MHz mode */
/* Control channel sub-carrier */
u8 nCur40MhzPrimeSC;
- /* Test for shorten RF configuration time.
+ /*
+ * Test for shorten RF configuration time.
* We save RF reg0 in this variable to reduce RF reading.
*/
u32 RfReg0Value[4];
@@ -977,12 +988,14 @@ typedef struct r8192_priv {
bool bLastDTPFlag_Low;
bool bstore_last_dtpflag;
- /* Define to discriminate on High power State or
+ /*
+ * Define to discriminate on High power State or
* on sitesurvey to change Tx gain index
*/
bool bstart_txctrl_bydtp;
rate_adaptive rate_adaptive;
- /* TX power tracking
+ /*
+ * TX power tracking
* OPEN/CLOSE TX POWER TRACKING
*/
txbbgain_struct txbbgain_table[TxBBGainTableLength];
diff --git a/drivers/staging/rtl8192u/r8192U_core.c b/drivers/staging/rtl8192u/r8192U_core.c
index 4065a4710142..410c8a3e56d7 100644
--- a/drivers/staging/rtl8192u/r8192U_core.c
+++ b/drivers/staging/rtl8192u/r8192U_core.c
@@ -194,7 +194,8 @@ static void rtl819x_set_channel_map(u8 channel_plan, struct r8192_priv *priv)
break;
case COUNTRY_CODE_GLOBAL_DOMAIN:
- /* this flag enabled to follow 11d country IE setting,
+ /*
+ * this flag enabled to follow 11d country IE setting,
* otherwise, it shall follow global domain settings.
*/
GET_DOT11D_INFO(ieee)->dot11d_enabled = 0;
@@ -213,7 +214,8 @@ static void rtl819x_set_channel_map(u8 channel_plan, struct r8192_priv *priv)
static void CamResetAllEntry(struct net_device *dev)
{
u32 ulcommand = 0;
- /* In static WEP, OID_ADD_KEY or OID_ADD_WEP are set before STA
+ /*
+ * In static WEP, OID_ADD_KEY or OID_ADD_WEP are set before STA
* associate to AP. However, ResetKey is called on
* OID_802_11_INFRASTRUCTURE_MODE and MlmeAssociateRequest. In this
* condition, Cam can not be reset because upper layer will not set
@@ -458,7 +460,8 @@ int read_nic_dword(struct net_device *dev, int indx, u32 *data)
/* u8 read_phy_cck(struct net_device *dev, u8 adr); */
/* u8 read_phy_ofdm(struct net_device *dev, u8 adr); */
-/* this might still called in what was the PHY rtl8185/rtl8192 common code
+/*
+ * this might still called in what was the PHY rtl8185/rtl8192 common code
* plans are to possibility turn it again in one common code...
*/
inline void force_pci_posting(struct net_device *dev)
@@ -669,7 +672,8 @@ void rtl8192_update_msr(struct net_device *dev)
read_nic_byte(dev, MSR, &msr);
msr &= ~MSR_LINK_MASK;
- /* do not change in link_state != WLAN_LINK_ASSOCIATED.
+ /*
+ * do not change in link_state != WLAN_LINK_ASSOCIATED.
* msr must be updated if the state is ASSOCIATING.
* this is intentional and make sense for ad-hoc and
* master (see the create BSS/IBSS func)
@@ -921,7 +925,8 @@ static void rtl8192_data_hard_resume(struct net_device *dev)
/* FIXME !! */
}
-/* this function TX data frames when the ieee80211 stack requires this.
+/*
+ * this function TX data frames when the ieee80211 stack requires this.
* It checks also if we need to stop the ieee tx queue, eventually do it
*/
static void rtl8192_hard_data_xmit(struct sk_buff *skb, struct net_device *dev,
@@ -946,7 +951,8 @@ static void rtl8192_hard_data_xmit(struct sk_buff *skb, struct net_device *dev,
spin_unlock_irqrestore(&priv->tx_lock, flags);
}
-/* This is a rough attempt to TX a frame
+/*
+ * This is a rough attempt to TX a frame
* This is called by the ieee 80211 stack to TX management frames.
* If the ring is full packet are dropped (for data frame the queue
* is stopped before this can happen).
@@ -1191,7 +1197,8 @@ static void rtl8192_net_update(struct net_device *dev)
}
}
-/* temporary hw beacon is not used any more.
+/*
+ * temporary hw beacon is not used any more.
* open it when necessary
*/
void rtl819xusb_beacon_tx(struct net_device *dev, u16 tx_rate)
@@ -1225,9 +1232,10 @@ short rtl819xU_tx_cmd(struct net_device *dev, struct sk_buff *skb)
pdesc->OWN = 1;
pdesc->LINIP = tcb_desc->bLastIniPkt;
- /*---------------------------------------------------------------------
+ /*
+ * ---------------------------------------------------------------------
* Fill up USB_OUT_CONTEXT.
- *---------------------------------------------------------------------
+ * ---------------------------------------------------------------------
*/
idx_pipe = 0x04;
usb_fill_bulk_urb(tx_urb, priv->udev,
@@ -1435,7 +1443,8 @@ short rtl8192_tx(struct net_device *dev, struct sk_buff *skb)
unsigned int idx_pipe;
pend = atomic_read(&priv->tx_pending[tcb_desc->queue_index]);
- /* we are locked here so the two atomic_read and inc are executed
+ /*
+ * we are locked here so the two atomic_read and inc are executed
* without interleaves
* !!! For debug purpose
*/
@@ -1505,7 +1514,7 @@ short rtl8192_tx(struct net_device *dev, struct sk_buff *skb)
tx_desc->Offset = sizeof(struct tx_fwinfo_819x_usb) + 8;
tx_desc->PktSize = (skb->len - TX_PACKET_SHIFT_BYTES) & 0xffff;
- /*DWORD 1*/
+ /* DWORD 1 */
tx_desc->SecCAMID = 0;
tx_desc->RATid = tcb_desc->RATRIndex;
tx_desc->NoEnc = 1;
@@ -1538,7 +1547,8 @@ short rtl8192_tx(struct net_device *dev, struct sk_buff *skb)
tx_desc->DISFB = tcb_desc->bTxDisableRateFallBack;
tx_desc->USERATE = tcb_desc->bTxUseDriverAssingedRate;
- /* Fill fields that are required to be initialized in
+ /*
+ * Fill fields that are required to be initialized in
* all of the descriptors
*/
/* DWORD 0 */
@@ -1557,7 +1567,8 @@ short rtl8192_tx(struct net_device *dev, struct sk_buff *skb)
status = usb_submit_urb(tx_urb, GFP_ATOMIC);
if (!status) {
- /* We need to send 0 byte packet whenever
+ /*
+ * We need to send 0 byte packet whenever
* 512N bytes/64N(HIGN SPEED/NORMAL SPEED) bytes packet has
* been transmitted. Otherwise, it will be halt to wait for
* another packet.
@@ -1721,7 +1732,8 @@ static void rtl8192_link_change(struct net_device *dev)
if (ieee->state == IEEE80211_LINKED) {
rtl8192_net_update(dev);
rtl8192_update_ratr_table(dev);
- /* Add this as in pure N mode, wep encryption will use software
+ /*
+ * Add this as in pure N mode, wep encryption will use software
* way, but there is no chance to set this as wep will not set
* group key in wext.
*/
@@ -1729,7 +1741,7 @@ static void rtl8192_link_change(struct net_device *dev)
ieee->pairwise_key_type == KEY_TYPE_WEP104)
EnableHWSecurityConfig8192(dev);
}
- /*update timing params*/
+ /* update timing params */
if (ieee->iw_mode == IW_MODE_INFRA || ieee->iw_mode == IW_MODE_ADHOC) {
u32 reg = 0;
@@ -1791,7 +1803,8 @@ static void rtl8192_qos_activate(struct work_struct *work)
goto success;
RT_TRACE(COMP_QOS,
"qos active process with associate response received\n");
- /* It better set slot time at first
+ /*
+ * It better set slot time at first
*
* For we just support b/g mode at present, let the slot time at
* 9/20 selection
@@ -1994,7 +2007,8 @@ static bool GetNmodeSupportBySecCfg8192(struct net_device *dev)
int encrypt;
crypt = ieee->crypt[ieee->tx_keyidx];
- /* we use connecting AP's capability instead of only security config
+ /*
+ * we use connecting AP's capability instead of only security config
* on our driver to distinguish whether it should use N mode or G mode
*/
encrypt = (network->capability & WLAN_CAPABILITY_PRIVACY) ||
@@ -2028,7 +2042,8 @@ static bool GetHalfNmodeSupportByAPs819xUsb(struct net_device *dev)
static void rtl8192_refresh_supportrate(struct r8192_priv *priv)
{
struct ieee80211_device *ieee = priv->ieee80211;
- /* We do not consider set support rate for ABG mode, only
+ /*
+ * We do not consider set support rate for ABG mode, only
* HT MCS rate is set here.
*/
if (ieee->mode == WIRELESS_MODE_N_24G ||
@@ -2085,7 +2100,8 @@ static void rtl8192_SetWirelessMode(struct net_device *dev, u8 wireless_mode)
}
}
#ifdef TO_DO_LIST
- /* TODO: this function doesn't work well at this time,
+ /*
+ * TODO: this function doesn't work well at this time,
* we should wait for FPGA
*/
ActUpdateChannelAccessSetting(
@@ -2194,21 +2210,25 @@ static void rtl8192_init_priv_variable(struct net_device *dev)
pHalData->CSMethod |
/* accept management/data */
RCR_AMF | RCR_ADF |
- /* accept control frame for SW
+ /*
+ * accept control frame for SW
* AP needs PS-poll
*/
RCR_ACF |
/* accept BC/MC/UC */
RCR_AB | RCR_AM | RCR_APM |
- /* accept ICV/CRC error
+ /*
+ * accept ICV/CRC error
* packet
*/
RCR_AICV | RCR_ACRC32 |
- /* Max DMA Burst Size per Tx
+ /*
+ * Max DMA Burst Size per Tx
* DMA Burst, 7: unlimited.
*/
((u32)7 << RCR_MXDMA_OFFSET) |
- /* Rx FIFO Threshold,
+ /*
+ * Rx FIFO Threshold,
* 7: No Rx threshold.
*/
(pHalData->EarlyRxThreshold << RCR_FIFO_OFFSET) |
@@ -2300,7 +2320,8 @@ static void rtl8192_get_eeprom_size(struct net_device *dev)
"<===========%s(), epromtype:%d\n", __func__, priv->epromtype);
}
-/* used to swap endian. as ntohl & htonl are not necessary
+/*
+ * used to swap endian. as ntohl & htonl are not necessary
* to swap endian, so use this instead.
*/
static inline u16 endian_swap(u16 *data)
@@ -2526,7 +2547,8 @@ static int rtl8192_read_eeprom_info(struct net_device *dev)
(priv->EEPROMTxPowerDiff & 0xf0) >> 4;
/* CrystalCap, bit12~15 */
priv->CrystalCap = priv->EEPROMCrystalCap;
- /* ThermalMeter, bit0~3 for RFIC1, bit4~7 for RFIC2
+ /*
+ * ThermalMeter, bit0~3 for RFIC1, bit4~7 for RFIC2
* 92U does not enable TX power tracking.
*/
priv->ThermalMeter[0] = priv->EEPROMThermalMeter;
@@ -2567,7 +2589,8 @@ static int rtl8192_read_eeprom_info(struct net_device *dev)
else
RT_TRACE(COMP_EPROM, "\n2T4R config\n");
- /* We can only know RF type in the function. So we have to init
+ /*
+ * We can only know RF type in the function. So we have to init
* DIG RATR table again.
*/
init_rate_adaptive(dev);
@@ -2681,7 +2704,8 @@ static void rtl8192_hwconfig(struct net_device *dev)
}
break;
case WIRELESS_MODE_N_24G:
- /* It support CCK rate by default. CCK rate will be filtered
+ /*
+ * It support CCK rate by default. CCK rate will be filtered
* out only when associated AP does not support it.
*/
regBwOpMode = BW_OPMODE_20MHZ;
@@ -2855,7 +2879,8 @@ static bool rtl8192_adapter_start(struct net_device *dev)
RT_TRACE((COMP_INIT | COMP_RF), DBG_LOUD,
("InitializeAdapter819xUsb(): Turn off RF for RegRfOff ----------\n"));
MgntActSet_RF_State(Adapter, eRfOff, RF_CHANGE_BY_SW);
- /* Those actions will be discard in MgntActSet_RF_State
+ /*
+ * Those actions will be discard in MgntActSet_RF_State
* because of the same state
*/
for (eRFPath = 0; eRFPath < pHalData->NumTotalRFPath; eRFPath++)
@@ -2881,7 +2906,8 @@ static bool rtl8192_adapter_start(struct net_device *dev)
MgntActSet_RF_State(Adapter,
eRfOff,
pMgntInfo->RfOffReason);
- /* Those actions will be discard in MgntActSet_RF_State
+ /*
+ * Those actions will be discard in MgntActSet_RF_State
* because of the same state
*/
for (eRFPath = 0; eRFPath < pHalData->NumTotalRFPath; eRFPath++)
@@ -2906,7 +2932,7 @@ static bool rtl8192_adapter_start(struct net_device *dev)
rtl8192_phy_updateInitGain(dev);
- /*--set CCK and OFDM Block "ON"--*/
+ /* --set CCK and OFDM Block "ON"-- */
rtl8192_setBBreg(dev, rFPGA0_RFMOD, bCCKEn, 0x1);
rtl8192_setBBreg(dev, rFPGA0_RFMOD, bOFDMEn, 0x1);
@@ -2963,7 +2989,8 @@ static bool rtl8192_adapter_start(struct net_device *dev)
return init_status;
}
-/* this configures registers for beacon tx and enables it via
+/*
+ * this configures registers for beacon tx and enables it via
* rtl8192_beacon_tx_enable(). rtl8192_beacon_tx_disable() might
* be used to stop beacon transmission
*/
@@ -3038,7 +3065,8 @@ static bool HalRxCheckStuck819xUsb(struct net_device *dev)
RT_TRACE(COMP_RESET,
"%s(): RegRxCounter is %d,RxCounter is %d\n", __func__,
RegRxCounter, priv->RxCounter);
- /* If rssi is small, we should check rx for long time because of bad rx.
+ /*
+ * If rssi is small, we should check rx for long time because of bad rx.
* or maybe it will continuous silent reset every 2 seconds.
*/
rx_chk_cnt++;
@@ -3116,7 +3144,8 @@ static RESET_TYPE rtl819x_ifcheck_resetornot(struct net_device *dev)
TxResetType = TxCheckStuck(dev);
if (rfState != eRfOff ||
(priv->ieee80211->iw_mode != IW_MODE_ADHOC)) {
- /* If driver is in the status of firmware download failure,
+ /*
+ * If driver is in the status of firmware download failure,
* driver skips RF initialization and RF is in turned off
* state. Driver should check whether Rx stuck and do silent
* reset. And if driver is in firmware download failure status,
@@ -3216,7 +3245,8 @@ static void CamRestoreAllEntry(struct net_device *dev)
}
}
-/* This function is used to fix Tx/Rx stop bug temporarily.
+/*
+ * This function is used to fix Tx/Rx stop bug temporarily.
* This function will do "system reset" to NIC when Tx or Rx is stuck.
* The method checking Tx/Rx stuck of this function is supported by FW,
* which reports Tx and Rx counter to register 0x128 and 0x130.
@@ -3527,7 +3557,8 @@ int rtl8192_down(struct net_device *dev)
for (i = 0; i < MAX_QUEUE_SIZE; i++)
skb_queue_purge(&priv->ieee80211->skb_drv_aggQ[i]);
- /* as cancel_delayed_work will del work->timer, so if work is not
+ /*
+ * as cancel_delayed_work will del work->timer, so if work is not
* defined as struct delayed_work, it will corrupt
*/
rtl8192_cancel_deferred_work(priv);
@@ -3652,7 +3683,8 @@ static int rtl8192_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
if (ieee->pairwise_key_type) {
memcpy((u8 *)key, ipw->u.crypt.key, 16);
EnableHWSecurityConfig8192(dev);
- /* We fill both index entry and 4th
+ /*
+ * We fill both index entry and 4th
* entry for pairwise key as in IPW
* interface, adhoc will only get here,
* so we need index entry for its
@@ -3873,7 +3905,8 @@ static long rtl819x_translate_todbm(u8 signal_strength_index)
}
-/* We can not declare RSSI/EVM total value of sliding window to
+/*
+ * We can not declare RSSI/EVM total value of sliding window to
* be a local static. Otherwise, it may increase when we return from S3/S4. The
* value will be kept in memory or disk. Declare the value in the adaptor
* and it will be reinitialized when returned from S3/S4.
@@ -3936,7 +3969,8 @@ static void rtl8192_process_phyinfo(struct r8192_priv *priv, u8 *buffer,
return;
- /* only rtl8190 supported
+ /*
+ * only rtl8190 supported
* rtl8190_process_cck_rxpathsel(priv,pprevious_stats);
*/
@@ -3946,7 +3980,8 @@ static void rtl8192_process_phyinfo(struct r8192_priv *priv, u8 *buffer,
/* record the general signal strength to the sliding window. */
- /* <2> Showed on UI for engineering
+ /*
+ * <2> Showed on UI for engineering
* hardware does not provide rssi information for each rf path in CCK
*/
if (!pprevious_stats->bIsCCK &&
@@ -4069,7 +4104,8 @@ static void rtl8192_process_phyinfo(struct r8192_priv *priv, u8 *buffer,
}
}
-/*-----------------------------------------------------------------------------
+/*
+ * -----------------------------------------------------------------------------
* Function: rtl819x_query_rxpwrpercentage()
*
* Overview:
@@ -4079,7 +4115,7 @@ static void rtl8192_process_phyinfo(struct r8192_priv *priv, u8 *buffer,
* Output: NONE
*
* Return: 0-100 percentage
- *---------------------------------------------------------------------------
+ * ---------------------------------------------------------------------------
*/
static u8 rtl819x_query_rxpwrpercentage(s8 antpower)
{
@@ -4208,7 +4244,8 @@ static void rtl8192_query_rxphystatus(struct r8192_priv *priv,
if (is_cck_rate) {
/* (1)Hardware does not provide RSSI for CCK */
- /* (2)PWDB, Average PWDB calculated by hardware
+ /*
+ * (2)PWDB, Average PWDB calculated by hardware
* (for rate adaptive)
*/
u8 report;
@@ -4309,7 +4346,8 @@ static void rtl8192_query_rxphystatus(struct r8192_priv *priv,
}
- /* (2)PWDB, Average PWDB calculated by hardware
+ /*
+ * (2)PWDB, Average PWDB calculated by hardware
* (for rate adaptive)
*/
rx_pwr_all = (((pofdm_buf->pwdb_all) >> 1) & 0x7f) - 106;
@@ -4331,7 +4369,8 @@ static void rtl8192_query_rxphystatus(struct r8192_priv *priv,
tmp_rxevm = pofdm_buf->rxevm_X[i];
rx_evmX = (s8)(tmp_rxevm);
- /* Do not use shift operation like "rx_evmX >>= 1"
+ /*
+ * Do not use shift operation like "rx_evmX >>= 1"
* because the compiler of free build environment will
* set the most significant bit to "zero" when doing
* shifting operation which may change a negative value
@@ -4342,7 +4381,8 @@ static void rtl8192_query_rxphystatus(struct r8192_priv *priv,
evm = rtl819x_evm_dbtopercentage(rx_evmX);
if (i == 0)
- /* Fill value in RFD, Get the first spatial
+ /*
+ * Fill value in RFD, Get the first spatial
* stream only
*/
pstats->SignalQuality =
@@ -4364,7 +4404,8 @@ static void rtl8192_query_rxphystatus(struct r8192_priv *priv,
priv->stats.received_bwtype[0]++;
}
- /* UI BSS List signal strength(in percentage), make it good looking,
+ /*
+ * UI BSS List signal strength(in percentage), make it good looking,
* from 0~100. It is assigned to the BSS List in
* GetValueFromBeaconOrProbeRsp().
*/
@@ -4396,7 +4437,8 @@ static void TranslateRxSignalStuff819xUsb(struct sk_buff *skb,
struct ieee80211_rx_stats *pstats,
struct rx_drvinfo_819x_usb *pdrvinfo)
{
- /* TODO: We must only check packet for current MAC address.
+ /*
+ * TODO: We must only check packet for current MAC address.
* Not finish
*/
struct rtl8192_rx_info *info = (struct rtl8192_rx_info *)skb->cb;
@@ -4441,7 +4483,8 @@ static void TranslateRxSignalStuff819xUsb(struct sk_buff *skb,
priv->stats.numpacket_matchbssid++;
if (bpacket_toself)
priv->stats.numpacket_toself++;
- /* Process PHY information for previous packet (RSSI/PWDB/EVM)
+ /*
+ * Process PHY information for previous packet (RSSI/PWDB/EVM)
* Because phy information is contained in the last packet of AMPDU
* only, so driver should process phy information of previous packet
*/
@@ -4616,7 +4659,8 @@ static void query_rxdesc_status(struct sk_buff *skb,
if (stats->Length < 24 || stats->Length > MAX_8192U_RX_SIZE)
stats->bHwError |= 1;
/* Get Driver Info */
- /* TODO: Need to verify it on FGPA platform
+ /*
+ * TODO: Need to verify it on FGPA platform
* Driver info are written to the RxBuffer following rx desc
*/
if (stats->RxDrvInfoSize != 0) {
@@ -4633,7 +4677,8 @@ static void query_rxdesc_status(struct sk_buff *skb,
ret_rate = HwRateToMRate90(driver_info->RxHT,
driver_info->RxRate);
if (ret_rate == 0xff) {
- /* Abnormal Case: Receive CRC OK packet with Rx
+ /*
+ * Abnormal Case: Receive CRC OK packet with Rx
* descriptor indicating non supported rate.
* Special Error Handling here
*/
@@ -4744,7 +4789,8 @@ static void rtl819xusb_process_received_packet(
#endif
#ifdef ENABLE_PS /* for adding ps function in future */
RT_RF_POWER_STATE rtState;
- /* When RF is off, we should not count the packet for hw/sw synchronize
+ /*
+ * When RF is off, we should not count the packet for hw/sw synchronize
* reason, ie. there may be a duration while sw switch is changed and
* hw switch is being changed.
*/
@@ -4926,7 +4972,8 @@ static int rtl8192_usb_probe(struct usb_interface *intf,
return ret;
}
-/* detach all the work and timer structure declared or inititialize
+/*
+ * detach all the work and timer structure declared or inititialize
* in r8192U_init function.
*/
static void rtl8192_cancel_deferred_work(struct r8192_priv *priv)
@@ -5023,7 +5070,8 @@ void EnableHWSecurityConfig8192(struct net_device *dev)
SECR_value |= SCR_RxUseDK;
SECR_value |= SCR_TxUseDK;
}
- /* add HWSec active enable here.
+ /*
+ * add HWSec active enable here.
* default using hwsec. when peer AP is in N mode only and
* pairwise_key_type is none_aes(which HT_IOT_ACT_PURE_N_MODE indicates
* it), use software security. when peer AP is in b,g,n mode mixed and
diff --git a/drivers/staging/rtl8192u/r8192U_dm.c b/drivers/staging/rtl8192u/r8192U_dm.c
index 2ba01041406b..b15cf98281dd 100644
--- a/drivers/staging/rtl8192u/r8192U_dm.c
+++ b/drivers/staging/rtl8192u/r8192U_dm.c
@@ -21,7 +21,7 @@ Major Change History:
#include "r819xU_phyreg.h"
#include "r8190_rtl8256.h"
#include "r819xU_cmdpkt.h"
-/*---------------------------Define Local Constant---------------------------*/
+/* ---------------------------Define Local Constant--------------------------- */
/* Indicate different AP vendor for IOT issue. */
static u32 edca_setting_DL[HT_IOT_PEER_MAX] = {
0x5e4322, 0x5e4322, 0x5e4322, 0x604322, 0x00a44f, 0x5ea44f
@@ -32,10 +32,10 @@ static u32 edca_setting_UL[HT_IOT_PEER_MAX] = {
#define RTK_UL_EDCA 0xa44f
#define RTK_DL_EDCA 0x5e4322
-/*---------------------------Define Local Constant---------------------------*/
+/* ---------------------------Define Local Constant--------------------------- */
-/*------------------------Define global variable-----------------------------*/
+/* ------------------------Define global variable----------------------------- */
/* Debug variable ? */
struct dig dm_digtable;
/* Store current software write register content for MAC PHY. */
@@ -53,11 +53,11 @@ static void dm_init_bandwidth_autoswitch(struct net_device *dev);
static void dm_bandwidth_autoswitch(struct net_device *dev);
/* DM --> TX power control */
-/*static void dm_initialize_txpower_tracking(struct net_device *dev);*/
+/* static void dm_initialize_txpower_tracking(struct net_device *dev); */
static void dm_check_txpower_tracking(struct net_device *dev);
-/*static void dm_txpower_reset_recovery(struct net_device *dev);*/
+/* static void dm_txpower_reset_recovery(struct net_device *dev); */
/* DM --> Dynamic Init Gain by RSSI */
static void dm_dig_init(struct net_device *dev);
@@ -89,16 +89,16 @@ static void dm_deInit_fsync(struct net_device *dev);
/* Added by vivi, 20080522 */
static void dm_check_txrateandretrycount(struct net_device *dev);
-/*---------------------Define local function prototype-----------------------*/
+/* ---------------------Define local function prototype----------------------- */
-/*---------------------Define of Tx Power Control For Near/Far Range --------*/ /*Add by Jacken 2008/02/18 */
+/* ---------------------Define of Tx Power Control For Near/Far Range -------- */ /* Add by Jacken 2008/02/18 */
static void dm_init_dynamic_txpower(struct net_device *dev);
static void dm_dynamic_txpower(struct net_device *dev);
/* DM --> For rate adaptive and DIG, we must send RSSI to firmware */
static void dm_send_rssi_tofw(struct net_device *dev);
static void dm_ctstoself(struct net_device *dev);
-/*---------------------------Define function prototype------------------------*/
+/* ---------------------------Define function prototype------------------------ */
/*
* ================================================================================
* HW Dynamic mechanism interface.
@@ -121,7 +121,7 @@ void init_hal_dm(struct net_device *dev)
/* Initial TX Power Control for near/far range , add by amy 2008/05/15, porting from windows code. */
dm_init_dynamic_txpower(dev);
init_rate_adaptive(dev);
- /*dm_initialize_txpower_tracking(dev);*/
+ /* dm_initialize_txpower_tracking(dev); */
dm_dig_init(dev);
dm_init_edca_turbo(dev);
dm_init_bandwidth_autoswitch(dev);
@@ -195,11 +195,11 @@ void dm_CheckRxAggregation(struct net_device *dev)
void hal_dm_watchdog(struct net_device *dev)
{
- /*struct r8192_priv *priv = ieee80211_priv(dev);*/
+ /* struct r8192_priv *priv = ieee80211_priv(dev); */
- /*static u8 previous_bssid[6] ={0};*/
+ /* static u8 previous_bssid[6] ={0}; */
- /*Add by amy 2008/05/15 ,porting from windows code.*/
+ /* Add by amy 2008/05/15 ,porting from windows code. */
dm_check_rate_adaptive(dev);
dm_dynamic_txpower(dev);
dm_check_txrateandretrycount(dev);
@@ -267,7 +267,8 @@ void init_rate_adaptive(struct net_device *dev)
} /* InitRateAdaptive */
-/*-----------------------------------------------------------------------------
+/*
+ * -----------------------------------------------------------------------------
* Function: dm_check_rate_adaptive()
*
* Overview:
@@ -282,7 +283,8 @@ void init_rate_adaptive(struct net_device *dev)
* When Who Remark
* 05/26/08 amy Create version 0 porting from windows code.
*
- *---------------------------------------------------------------------------*/
+ * ---------------------------------------------------------------------------
+ */
static void dm_check_rate_adaptive(struct net_device *dev)
{
struct r8192_priv *priv = ieee80211_priv(dev);
@@ -335,10 +337,13 @@ static void dm_check_rate_adaptive(struct net_device *dev)
(pra->ping_rssi_ratr & (~BIT(31))) |
((bshort_gi_enabled) ? BIT(31) : 0);
- /* 2007/10/08 MH We support RA smooth scheme now. When it is the first
- time to link with AP. We will not change upper/lower threshold. If
- STA stay in high or low level, we must change two different threshold
- to prevent jumping frequently. */
+ /*
+ * 2007/10/08 MH We support RA smooth scheme now. When it is the first
+ * time to link with AP. We will not change upper/lower threshold. If
+ * STA stay in high or low level, we must change two different threshold
+ * to prevent jumping frequently.
+ *
+ */
if (pra->ratr_state == DM_RATR_STA_HIGH) {
HighRSSIThreshForRA = pra->high2low_rssi_thresh_for_ra;
LowRSSIThreshForRA = (priv->CurrentChannelBW != HT_CHANNEL_WIDTH_20) ?
@@ -1601,7 +1606,8 @@ static void dm_bb_initialgain_backup(struct net_device *dev)
} /* dm_BBInitialGainBakcup */
#endif
-/*-----------------------------------------------------------------------------
+/*
+ * -----------------------------------------------------------------------------
* Function: dm_dig_init()
*
* Overview: Set DIG scheme init value.
@@ -1616,7 +1622,8 @@ static void dm_bb_initialgain_backup(struct net_device *dev)
* When Who Remark
* 05/15/2008 amy Create Version 0 porting from windows code.
*
- *---------------------------------------------------------------------------*/
+ * ---------------------------------------------------------------------------
+ */
static void dm_dig_init(struct net_device *dev)
{
struct r8192_priv *priv = ieee80211_priv(dev);
@@ -1644,7 +1651,8 @@ static void dm_dig_init(struct net_device *dev)
} /* dm_dig_init */
-/*-----------------------------------------------------------------------------
+/*
+ * -----------------------------------------------------------------------------
* Function: dm_ctrl_initgain_byrssi()
*
* Overview: Driver must monitor RSSI and notify firmware to change initial
@@ -1660,7 +1668,8 @@ static void dm_dig_init(struct net_device *dev)
* Revised History:
* When Who Remark
* 05/27/2008 amy Create Version 0 porting from windows code.
- *---------------------------------------------------------------------------*/
+ * ---------------------------------------------------------------------------
+ */
static void dm_ctrl_initgain_byrssi(struct net_device *dev)
{
if (!dm_digtable.dig_enable_flag)
@@ -1747,11 +1756,15 @@ static void dm_ctrl_initgain_byrssi_by_fwfalse_alarm(
/*DbgPrint("DIG Check\n\r RSSI=%d LOW=%d HIGH=%d STATE=%d",
pHalData->UndecoratedSmoothedPWDB, DM_DigTable.RssiLowThresh,
DM_DigTable.RssiHighThresh, DM_DigTable.Dig_State);*/
- /* 1. When RSSI decrease, We have to judge if it is smaller than a threshold
- and then execute the step below. */
+ /*
+ * 1. When RSSI decrease, We have to judge if it is smaller than a threshold
+ * and then execute the step below.
+ */
if (priv->undecorated_smoothed_pwdb <= dm_digtable.rssi_low_thresh) {
- /* 2008/02/05 MH When we execute silent reset, the DIG PHY parameters
- will be reset to init value. We must prevent the condition. */
+ /*
+ * 2008/02/05 MH When we execute silent reset, the DIG PHY parameters
+ * will be reset to init value. We must prevent the condition.
+ */
if (dm_digtable.dig_state == DM_STA_DIG_OFF &&
(priv->reset_count == reset_cnt)) {
return;
@@ -1796,8 +1809,10 @@ static void dm_ctrl_initgain_byrssi_by_fwfalse_alarm(
}
- /* 2. When RSSI increase, We have to judge if it is larger than a threshold
- and then execute the step below. */
+ /*
+ * 2. When RSSI increase, We have to judge if it is larger than a threshold
+ * and then execute the step below.
+ */
if (priv->undecorated_smoothed_pwdb >= dm_digtable.rssi_high_thresh) {
u8 reset_flag = 0;
@@ -1865,7 +1880,8 @@ static void dm_ctrl_initgain_byrssi_by_fwfalse_alarm(
} /* dm_CtrlInitGainByRssi */
-/*-----------------------------------------------------------------------------
+/*
+ * -----------------------------------------------------------------------------
* Function: dm_ctrl_initgain_byrssi_highpwr()
*
* Overview:
@@ -1880,7 +1896,8 @@ static void dm_ctrl_initgain_byrssi_by_fwfalse_alarm(
* When Who Remark
* 05/28/2008 amy Create Version 0 porting from windows code.
*
- *---------------------------------------------------------------------------*/
+ * ---------------------------------------------------------------------------
+ */
static void dm_ctrl_initgain_byrssi_highpwr(
struct net_device *dev)
{
@@ -2147,7 +2164,7 @@ static void dm_check_edca_turbo(
{
struct r8192_priv *priv = ieee80211_priv(dev);
PRT_HIGH_THROUGHPUT pHTInfo = priv->ieee80211->pHTInfo;
- /*PSTA_QOS pStaQos = pMgntInfo->pStaQos;*/
+ /* PSTA_QOS pStaQos = pMgntInfo->pStaQos; */
/* Keep past Tx/Rx packet count for RT-to-RT EDCA turbo. */
static unsigned long lastTxOkCnt;
@@ -2224,7 +2241,7 @@ static void dm_check_edca_turbo(
* If it is set, immediately set ACM control bit to downgrading AC for passing WMM testplan. Annie, 2005-12-13.
*/
{
- /* TODO: Modified this part and try to set acm control in only 1 IO processing!! */
+ /* TODO: Modified this part and try to set acm control in only 1 IO processing!! */
struct aci_aifsn *pAciAifsn = (struct aci_aifsn *)&(qos_parameters->aifs[0]);
u8 AcmCtrl;
@@ -2273,10 +2290,10 @@ static void dm_ctstoself(struct net_device *dev)
return;
}
/*
- 1. Uplink
- 2. Linksys350/Linksys300N
- 3. <50 disable, >55 enable
- */
+ * 1. Uplink
+ * 2. Linksys350/Linksys300N
+ * 3. <50 disable, >55 enable
+ */
if (pHTInfo->IOTPeer == HT_IOT_PEER_BROADCOM) {
curTxOkCnt = priv->stats.txbytesunicast - lastTxOkCnt;
@@ -2293,7 +2310,8 @@ static void dm_ctstoself(struct net_device *dev)
}
}
-/*-----------------------------------------------------------------------------
+/*
+ * -----------------------------------------------------------------------------
* Function: dm_check_pbc_gpio()
*
* Overview: Check if PBC button is pressed.
@@ -2308,7 +2326,8 @@ static void dm_ctstoself(struct net_device *dev)
* When Who Remark
* 05/28/2008 amy Create Version 0 porting from windows code.
*
- *---------------------------------------------------------------------------*/
+ * ---------------------------------------------------------------------------
+ */
static void dm_check_pbc_gpio(struct net_device *dev)
{
struct r8192_priv *priv = ieee80211_priv(dev);
@@ -2329,7 +2348,8 @@ static void dm_check_pbc_gpio(struct net_device *dev)
}
-/*-----------------------------------------------------------------------------
+/*
+ * -----------------------------------------------------------------------------
* Function: DM_RFPathCheckWorkItemCallBack()
*
* Overview: Check if Current RF RX path is enabled
@@ -2344,7 +2364,8 @@ static void dm_check_pbc_gpio(struct net_device *dev)
* When Who Remark
* 01/30/2008 MHC Create Version 0.
*
- *---------------------------------------------------------------------------*/
+ * ---------------------------------------------------------------------------
+ */
void dm_rf_pathcheck_workitemcallback(struct work_struct *work)
{
struct delayed_work *dwork = to_delayed_work(work);
@@ -2353,8 +2374,10 @@ void dm_rf_pathcheck_workitemcallback(struct work_struct *work)
/*bool bactually_set = false;*/
u8 rfpath = 0, i;
- /* 2008/01/30 MH After discussing with SD3 Jerry, 0xc04/0xd04 register will
- always be the same. We only read 0xc04 now. */
+ /*
+ * 2008/01/30 MH After discussing with SD3 Jerry, 0xc04/0xd04 register will
+ * always be the same. We only read 0xc04 now.
+ */
read_nic_byte(dev, 0xc04, &rfpath);
/* Check Bit 0-3, it means if RF A-D is enabled. */
@@ -2579,7 +2602,8 @@ static void dm_rxpath_sel_byrssi(struct net_device *dev)
}
}
-/*-----------------------------------------------------------------------------
+/*
+ * -----------------------------------------------------------------------------
* Function: dm_check_rx_path_selection()
*
* Overview: Call a workitem to check current RXRF path and Rx Path selection by RSSI.
@@ -2594,7 +2618,8 @@ static void dm_rxpath_sel_byrssi(struct net_device *dev)
* When Who Remark
* 05/28/2008 amy Create Version 0 porting from windows code.
*
- *---------------------------------------------------------------------------*/
+ * ---------------------------------------------------------------------------
+ */
static void dm_check_rx_path_selection(struct net_device *dev)
{
struct r8192_priv *priv = ieee80211_priv(dev);
@@ -2901,7 +2926,8 @@ void dm_check_fsync(struct net_device *dev)
}
}
-/*-----------------------------------------------------------------------------
+/*
+ * -----------------------------------------------------------------------------
* Function: dm_shadow_init()
*
* Overview: Store all NIC MAC/BB register content.
@@ -2916,7 +2942,8 @@ void dm_check_fsync(struct net_device *dev)
* When Who Remark
* 05/29/2008 amy Create Version 0 porting from windows code.
*
- *---------------------------------------------------------------------------*/
+ * ---------------------------------------------------------------------------
+ */
void dm_shadow_init(struct net_device *dev)
{
u8 page;
@@ -2938,12 +2965,13 @@ void dm_shadow_init(struct net_device *dev)
} /* dm_shadow_init */
-/*---------------------------Define function prototype------------------------*/
-/*-----------------------------------------------------------------------------
+/* ---------------------------Define function prototype------------------------ */
+/*
+ * -----------------------------------------------------------------------------
* Function: DM_DynamicTxPower()
*
* Overview: Detect Signal strength to control TX Registry
- Tx Power Control For Near/Far Range
+ * Tx Power Control For Near/Far Range
*
* Input: NONE
*
@@ -2955,7 +2983,8 @@ void dm_shadow_init(struct net_device *dev)
* When Who Remark
* 03/06/2008 Jacken Create Version 0.
*
- *---------------------------------------------------------------------------*/
+ * ---------------------------------------------------------------------------
+ */
static void dm_init_dynamic_txpower(struct net_device *dev)
{
struct r8192_priv *priv = ieee80211_priv(dev);
@@ -3057,4 +3086,4 @@ static void dm_send_rssi_tofw(struct net_device *dev)
write_nic_byte(dev, DRIVER_RSSI, (u8)priv->undecorated_smoothed_pwdb);
}
-/*---------------------------Define function prototype------------------------*/
+/* ---------------------------Define function prototype------------------------ */
diff --git a/drivers/staging/rtl8192u/r8192U_dm.h b/drivers/staging/rtl8192u/r8192U_dm.h
index 0de0332906bd..d7ed0eb2fedb 100644
--- a/drivers/staging/rtl8192u/r8192U_dm.h
+++ b/drivers/staging/rtl8192u/r8192U_dm.h
@@ -21,7 +21,7 @@
#ifndef __R8192UDM_H__
#define __R8192UDM_H__
-/*--------------------------Define Parameters-------------------------------*/
+/* --------------------------Define Parameters------------------------------- */
#define DM_DIG_THRESH_HIGH 40
#define DM_DIG_THRESH_LOW 35
@@ -59,9 +59,9 @@
#define INITIAL_TX_RATE_REG 0x1b9
#define TX_RETRY_COUNT_REG 0x1ac
#define REG_C38_TH 20
-/*--------------------------Define Parameters-------------------------------*/
+/* --------------------------Define Parameters------------------------------- */
-/*------------------------------Define structure----------------------------*/
+/* ------------------------------Define structure---------------------------- */
enum dig_algorithm {
DIG_ALGO_BY_FALSE_ALARM = 0,
@@ -143,18 +143,18 @@ struct tx_config_cmd {
u32 cmd_value;
};
-/*------------------------------Define structure----------------------------*/
+/* ------------------------------Define structure---------------------------- */
-/*------------------------Export global variable----------------------------*/
+/* ------------------------Export global variable---------------------------- */
extern struct dig dm_digtable;
extern u8 dm_shadow[16][256];
-/*------------------------Export global variable----------------------------*/
+/* ------------------------Export global variable---------------------------- */
-/*------------------------Export Marco Definition---------------------------*/
+/* ------------------------Export Marco Definition--------------------------- */
-/*------------------------Export Marco Definition---------------------------*/
+/* ------------------------Export Marco Definition--------------------------- */
-/*--------------------------Exported Function prototype---------------------*/
+/* --------------------------Exported Function prototype--------------------- */
void init_hal_dm(struct net_device *dev);
void deinit_hal_dm(struct net_device *dev);
void hal_dm_watchdog(struct net_device *dev);
@@ -171,8 +171,8 @@ void dm_fsync_timer_callback(struct timer_list *t);
void dm_cck_txpower_adjust(struct net_device *dev, bool binch14);
void dm_shadow_init(struct net_device *dev);
void dm_initialize_txpower_tracking(struct net_device *dev);
-/*--------------------------Exported Function prototype---------------------*/
+/* --------------------------Exported Function prototype--------------------- */
-#endif /*__R8192UDM_H__ */
+#endif /* __R8192UDM_H__ */
/* End of r8192U_dm.h */
diff --git a/drivers/staging/rtl8192u/r8192U_hw.h b/drivers/staging/rtl8192u/r8192U_hw.h
index 95a2d2ee3c65..79d462894f1d 100644
--- a/drivers/staging/rtl8192u/r8192U_hw.h
+++ b/drivers/staging/rtl8192u/r8192U_hw.h
@@ -39,21 +39,21 @@
#define EEPROM_TX_POWER_DIFF 0x1F
#define EEPROM_THERMAL_METER 0x20
-#define EEPROM_PW_DIFF 0x21 //0x21
-#define EEPROM_CRYSTAL_CAP 0x22 //0x22
+#define EEPROM_PW_DIFF 0x21 /* 0x21 */
+#define EEPROM_CRYSTAL_CAP 0x22 /* 0x22 */
-#define EEPROM_TX_PW_INDEX_CCK 0x23 //0x23
-#define EEPROM_TX_PW_INDEX_OFDM_24G 0x24 //0x24~0x26
-#define EEPROM_TX_PW_INDEX_CCK_V1 0x29 //0x29~0x2B
-#define EEPROM_TX_PW_INDEX_OFDM_24G_V1 0x2C //0x2C~0x2E
-#define EEPROM_TX_PW_INDEX_VER 0x27 //0x27
+#define EEPROM_TX_PW_INDEX_CCK 0x23 /* 0x23 */
+#define EEPROM_TX_PW_INDEX_OFDM_24G 0x24 /* 0x24~0x26 */
+#define EEPROM_TX_PW_INDEX_CCK_V1 0x29 /* 0x29~0x2B */
+#define EEPROM_TX_PW_INDEX_OFDM_24G_V1 0x2C /* 0x2C~0x2E */
+#define EEPROM_TX_PW_INDEX_VER 0x27 /* 0x27 */
#define EEPROM_DEFAULT_THERNAL_METER 0x7
#define EEPROM_DEFAULT_PW_DIFF 0x4
#define EEPROM_DEFAULT_CRYSTAL_CAP 0x5
#define EEPROM_DEFAULT_TX_POWER 0x1010
-#define EEPROM_CUSTOMER_ID 0x7B //0x7B:CustomerID
-#define EEPROM_CHANNEL_PLAN 0x16 //0x7C
+#define EEPROM_CUSTOMER_ID 0x7B /* 0x7B:CustomerID */
+#define EEPROM_CHANNEL_PLAN 0x16 /* 0x7C */
#define EEPROM_CID_RUNTOP 0x2
#define EEPROM_CID_DLINK 0x8
@@ -63,25 +63,24 @@
#define AC_PARAM_ECW_MIN_OFFSET 8
#define AC_PARAM_AIFS_OFFSET 0
-//#endif
enum _RTL8192Usb_HW {
MAC0 = 0x000,
MAC4 = 0x004,
#define BB_GLOBAL_RESET_BIT 0x1
- BB_GLOBAL_RESET = 0x020, // BasebandGlobal Reset Register
- BSSIDR = 0x02E, // BSSID Register
- CMDR = 0x037, // Command register
+ BB_GLOBAL_RESET = 0x020, /* BasebandGlobal Reset Register */
+ BSSIDR = 0x02E, /* BSSID Register */
+ CMDR = 0x037, /* Command register */
#define CR_RE 0x08
#define CR_TE 0x04
- SIFS = 0x03E, // SIFS register
+ SIFS = 0x03E, /* SIFS register */
#define TCR_MXDMA_2048 7
#define TCR_LRL_OFFSET 0
#define TCR_SRL_OFFSET 8
#define TCR_MXDMA_OFFSET 21
-#define TCR_SAT BIT(24) // Enable Rate depedent ack timeout timer
- RCR = 0x044, // Receive Configuration Register
+#define TCR_SAT BIT(24) /* Enable Rate depedent ack timeout timer */
+ RCR = 0x044, /* Receive Configuration Register */
#define MAC_FILTER_MASK (BIT(0) | BIT(1) | BIT(2) | BIT(3) | BIT(5) | \
BIT(12) | BIT(18) | BIT(19) | BIT(20) | BIT(21) | \
BIT(22) | BIT(23))
@@ -91,45 +90,47 @@ enum _RTL8192Usb_HW {
#define MAX_RX_DMA_MASK (BIT(8) | BIT(9) | BIT(10))
#define RCR_MXDMA_OFFSET 8
#define RCR_FIFO_OFFSET 13
-#define RCR_ONLYERLPKT BIT(31) // Early Receiving based on Packet Size.
-#define RCR_CBSSID BIT(23) // Accept BSSID match packet
-#define RCR_APWRMGT BIT(22) // Accept power management packet
-#define RCR_AMF BIT(20) // Accept management type frame
-#define RCR_ACF BIT(19) // Accept control type frame
-#define RCR_ADF BIT(18) // Accept data type frame
-#define RCR_AICV BIT(12) // Accept ICV error packet
-#define RCR_ACRC32 BIT(5) // Accept CRC32 error packet
-#define RCR_AB BIT(3) // Accept broadcast packet
-#define RCR_AM BIT(2) // Accept multicast packet
-#define RCR_APM BIT(1) // Accept physical match packet
-#define RCR_AAP BIT(0) // Accept all unicast packet
- SLOT_TIME = 0x049, // Slot Time Register
- ACK_TIMEOUT = 0x04c, // Ack Timeout Register
- EDCAPARA_BE = 0x050, // EDCA Parameter of AC BE
- EDCAPARA_BK = 0x054, // EDCA Parameter of AC BK
- EDCAPARA_VO = 0x058, // EDCA Parameter of AC VO
- EDCAPARA_VI = 0x05C, // EDCA Parameter of AC VI
- BCN_TCFG = 0x062, // Beacon Time Configuration
+#define RCR_ONLYERLPKT BIT(31) /* Early Receiving based on Packet Size. */
+#define RCR_CBSSID BIT(23) /* Accept BSSID match packet */
+#define RCR_APWRMGT BIT(22) /* Accept power management packet */
+#define RCR_AMF BIT(20) /* Accept management type frame */
+#define RCR_ACF BIT(19) /* Accept control type frame */
+#define RCR_ADF BIT(18) /* Accept data type frame */
+#define RCR_AICV BIT(12) /* Accept ICV error packet */
+#define RCR_ACRC32 BIT(5) /* Accept CRC32 error packet */
+#define RCR_AB BIT(3) /* Accept broadcast packet */
+#define RCR_AM BIT(2) /* Accept multicast packet */
+#define RCR_APM BIT(1) /* Accept physical match packet */
+#define RCR_AAP BIT(0) /* Accept all unicast packet */
+ SLOT_TIME = 0x049, /* Slot Time Register */
+ ACK_TIMEOUT = 0x04c, /* Ack Timeout Register */
+ EDCAPARA_BE = 0x050, /* EDCA Parameter of AC BE */
+ EDCAPARA_BK = 0x054, /* EDCA Parameter of AC BK */
+ EDCAPARA_VO = 0x058, /* EDCA Parameter of AC VO */
+ EDCAPARA_VI = 0x05C, /* EDCA Parameter of AC VI */
+ BCN_TCFG = 0x062, /* Beacon Time Configuration */
#define BCN_TCFG_CW_SHIFT 8
#define BCN_TCFG_IFS 0
- BCN_INTERVAL = 0x070, // Beacon Interval (TU)
- ATIMWND = 0x072, // ATIM Window Size (TU)
- BCN_DRV_EARLY_INT = 0x074, // Driver Early Interrupt Time (TU). Time to send interrupt to notify to change beacon content before TBTT
- BCN_DMATIME = 0x076, // Beacon DMA and ATIM interrupt time (US). Indicates the time before TBTT to perform beacon queue DMA
- BCN_ERR_THRESH = 0x078, // Beacon Error Threshold
- RWCAM = 0x0A0, //IN 8190 Data Sheet is called CAMcmd
- WCAMI = 0x0A4, // Software write CAM input content
- SECR = 0x0B0, //Security Configuration Register
-#define SCR_TxUseDK BIT(0) //Force Tx Use Default Key
-#define SCR_RxUseDK BIT(1) //Force Rx Use Default Key
-#define SCR_TxEncEnable BIT(2) //Enable Tx Encryption
-#define SCR_RxDecEnable BIT(3) //Enable Rx Decryption
-#define SCR_SKByA2 BIT(4) //Search kEY BY A2
-#define SCR_NoSKMC BIT(5) //No Key Search for Multicast
-
-//----------------------------------------------------------------------------
-// 8190 CPU General Register (offset 0x100, 4 byte)
-//----------------------------------------------------------------------------
+ BCN_INTERVAL = 0x070, /* Beacon Interval (TU) */
+ ATIMWND = 0x072, /* ATIM Window Size (TU) */
+ BCN_DRV_EARLY_INT = 0x074, /* Driver Early Interrupt Time (TU). Time to send interrupt to notify to change beacon content before TBTT */
+ BCN_DMATIME = 0x076, /* Beacon DMA and ATIM interrupt time (US). Indicates the time before TBTT to perform beacon queue DMA */
+ BCN_ERR_THRESH = 0x078, /* Beacon Error Threshold */
+ RWCAM = 0x0A0, /* IN 8190 Data Sheet is called CAMcmd */
+ WCAMI = 0x0A4, /* Software write CAM input content */
+ SECR = 0x0B0, /* Security Configuration Register */
+#define SCR_TxUseDK BIT(0) /* Force Tx Use Default Key */
+#define SCR_RxUseDK BIT(1) /* Force Rx Use Default Key */
+#define SCR_TxEncEnable BIT(2) /* Enable Tx Encryption */
+#define SCR_RxDecEnable BIT(3) /* Enable Rx Decryption */
+#define SCR_SKByA2 BIT(4) /* Search kEY BY A2 */
+#define SCR_NoSKMC BIT(5) /* No Key Search for Multicast */
+
+/*
+ * ----------------------------------------------------------------------------
+ * 8190 CPU General Register (offset 0x100, 4 byte)
+ * ----------------------------------------------------------------------------
+ */
#define CPU_CCK_LOOPBACK 0x00030000
#define CPU_GEN_SYSTEM_RESET 0x00000001
#define CPU_GEN_FIRMWARE_RESET 0x00000008
@@ -138,37 +139,38 @@ enum _RTL8192Usb_HW {
#define CPU_GEN_PUT_CODE_OK 0x00000080
#define CPU_GEN_BB_RST 0x00000100
#define CPU_GEN_PWR_STB_CPU 0x00000004
-#define CPU_GEN_NO_LOOPBACK_MSK 0xFFF8FFFF // Set bit18,17,16 to 0. Set bit19
-#define CPU_GEN_NO_LOOPBACK_SET 0x00080000 // Set BIT19 to 1
- CPU_GEN = 0x100, // CPU Reset Register
-
- AcmHwCtrl = 0x171, // ACM Hardware Control Register
-//----------------------------------------------------------------------------
-////
-//// 8190 AcmHwCtrl bits (offset 0x171, 1 byte)
-////----------------------------------------------------------------------------
-//
+#define CPU_GEN_NO_LOOPBACK_MSK 0xFFF8FFFF /* Set bit18,17,16 to 0. Set bit19 */
+#define CPU_GEN_NO_LOOPBACK_SET 0x00080000 /* Set BIT19 to 1 */
+ CPU_GEN = 0x100, /* CPU Reset Register */
+
+ AcmHwCtrl = 0x171, /* ACM Hardware Control Register */
+/*
+ * ----------------------------------------------------------------------------
+ *
+ * 8190 AcmHwCtrl bits (offset 0x171, 1 byte)
+ * ----------------------------------------------------------------------------
+ */
#define AcmHw_BeqEn BIT(1)
- RQPN1 = 0x180, // Reserved Queue Page Number , Vo Vi, Be, Bk
- RQPN2 = 0x184, // Reserved Queue Page Number, HCCA, Cmd, Mgnt, High
- RQPN3 = 0x188, // Reserved Queue Page Number, Bcn, Public,
- QPNR = 0x1D0, //0x1F0, // Queue Packet Number report per TID
+ RQPN1 = 0x180, /* Reserved Queue Page Number , Vo Vi, Be, Bk */
+ RQPN2 = 0x184, /* Reserved Queue Page Number, HCCA, Cmd, Mgnt, High */
+ RQPN3 = 0x188, /* Reserved Queue Page Number, Bcn, Public, */
+ QPNR = 0x1D0, /* 0x1F0, Queue Packet Number report per TID */
#define BW_OPMODE_5G BIT(1)
#define BW_OPMODE_20MHZ BIT(2)
- BW_OPMODE = 0x300, // Bandwidth operation mode
- MSR = 0x303, // Media Status register
+ BW_OPMODE = 0x300, /* Bandwidth operation mode */
+ MSR = 0x303, /* Media Status register */
#define MSR_LINK_MASK (BIT(0)|BIT(1))
#define MSR_LINK_MANAGED 2
#define MSR_LINK_NONE 0
#define MSR_LINK_SHIFT 0
#define MSR_LINK_ADHOC 1
#define MSR_LINK_MASTER 3
- RETRY_LIMIT = 0x304, // Retry Limit [15:8]-short, [7:0]-long
+ RETRY_LIMIT = 0x304, /* Retry Limit [15:8]-short, [7:0]-long */
#define RETRY_LIMIT_SHORT_SHIFT 8
#define RETRY_LIMIT_LONG_SHIFT 0
- RRSR = 0x310, // Response Rate Set
+ RRSR = 0x310, /* Response Rate Set */
#define RRSR_1M BIT(0)
#define RRSR_2M BIT(1)
#define RRSR_5_5M BIT(2)
@@ -181,19 +183,21 @@ enum _RTL8192Usb_HW {
#define RRSR_36M BIT(9)
#define RRSR_48M BIT(10)
#define RRSR_54M BIT(11)
-#define BRSR_AckShortPmb BIT(23) // CCK ACK: use Short Preamble or not.
+#define BRSR_AckShortPmb BIT(23) /* CCK ACK: use Short Preamble or not. */
UFWP = 0x318,
- RATR0 = 0x320, // Rate Adaptive Table register1
- DRIVER_RSSI = 0x32c, // Driver tell Firmware current RSSI
-//----------------------------------------------------------------------------
-// 8190 Rate Adaptive Table Register (offset 0x320, 4 byte)
-//----------------------------------------------------------------------------
-//CCK
+ RATR0 = 0x320, /* Rate Adaptive Table register1 */
+ DRIVER_RSSI = 0x32c, /* Driver tell Firmware current RSSI */
+/*
+ * ----------------------------------------------------------------------------
+ * 8190 Rate Adaptive Table Register (offset 0x320, 4 byte)
+ * ----------------------------------------------------------------------------
+ */
+/* CCK */
#define RATR_1M 0x00000001
#define RATR_2M 0x00000002
#define RATR_55M 0x00000004
#define RATR_11M 0x00000008
-//OFDM
+/* OFDM */
#define RATR_6M 0x00000010
#define RATR_9M 0x00000020
#define RATR_12M 0x00000040
@@ -202,7 +206,7 @@ enum _RTL8192Usb_HW {
#define RATR_36M 0x00000200
#define RATR_48M 0x00000400
#define RATR_54M 0x00000800
-//MCS 1 Spatial Stream
+/* MCS 1 Spatial Stream */
#define RATR_MCS0 0x00001000
#define RATR_MCS1 0x00002000
#define RATR_MCS2 0x00004000
@@ -211,7 +215,7 @@ enum _RTL8192Usb_HW {
#define RATR_MCS5 0x00020000
#define RATR_MCS6 0x00040000
#define RATR_MCS7 0x00080000
-//MCS 2 Spatial Stream
+/* MCS 2 Spatial Stream */
#define RATR_MCS8 0x00100000
#define RATR_MCS9 0x00200000
#define RATR_MCS10 0x00400000
@@ -220,7 +224,7 @@ enum _RTL8192Usb_HW {
#define RATR_MCS13 0x02000000
#define RATR_MCS14 0x04000000
#define RATR_MCS15 0x08000000
-// ALL CCK Rate
+/* ALL CCK Rate */
#define RATE_ALL_CCK RATR_1M|RATR_2M|RATR_55M|RATR_11M
#define RATE_ALL_OFDM_AG RATR_6M|RATR_9M|RATR_12M|RATR_18M|RATR_24M\
|RATR_36M|RATR_48M|RATR_54M
@@ -239,8 +243,10 @@ enum _RTL8192Usb_HW {
#define EPROM_W_BIT BIT(1)
#define EPROM_R_BIT BIT(0)
};
-//----------------------------------------------------------------------------
-// 818xB AnaParm & AnaParm2 Register
-//----------------------------------------------------------------------------
+/*
+ * ----------------------------------------------------------------------------
+ * 818xB AnaParm & AnaParm2 Register
+ * ----------------------------------------------------------------------------
+ */
#define GPI 0x108
#endif
diff --git a/drivers/staging/rtl8192u/r8192U_wx.c b/drivers/staging/rtl8192u/r8192U_wx.c
index 5822bb7984b9..adb9fe8a79da 100644
--- a/drivers/staging/rtl8192u/r8192U_wx.c
+++ b/drivers/staging/rtl8192u/r8192U_wx.c
@@ -200,7 +200,8 @@ static int r8192_wx_set_mode(struct net_device *dev, struct iw_request_info *a,
struct iw_range_with_scan_capa {
/* Informative stuff (to choose between different interface) */
__u32 throughput; /* To give an idea... */
- /* In theory this value should be the maximum benchmarked
+ /*
+ * In theory this value should be the maximum benchmarked
* TCP/IP throughput, because with most of these devices the
* bit rate is meaningless (overhead an co) to estimate how
* fast the connection will go and pick the fastest one.
@@ -231,11 +232,13 @@ static int rtl8180_wx_get_range(struct net_device *dev,
wrqu->data.length = sizeof(*range);
memset(range, 0, sizeof(*range));
- /* Let's try to keep this struct in the same order as in
+ /*
+ * Let's try to keep this struct in the same order as in
* linux/include/wireless.h
*/
- /* TODO: See what values we can set, and remove the ones we can't
+ /*
+ * TODO: See what values we can set, and remove the ones we can't
* set, or fill them with some default data.
*/
@@ -644,7 +647,8 @@ static int r8192_wx_set_retry(struct net_device *dev,
DMESG("Setting retry for non RTS/CTS data to %d", wrqu->retry.value);
}
- /* FIXME !
+ /*
+ * FIXME !
* We might try to write directly the TX config register
* or to restart just the (R)TX process.
* I'm unsure if whole reset is really needed
diff --git a/drivers/staging/rtl8192u/r819xU_cmdpkt.c b/drivers/staging/rtl8192u/r819xU_cmdpkt.c
index e064f43fd8b6..1fd596f09241 100644
--- a/drivers/staging/rtl8192u/r819xU_cmdpkt.c
+++ b/drivers/staging/rtl8192u/r819xU_cmdpkt.c
@@ -33,7 +33,8 @@ rt_status SendTxCommandPacket(struct net_device *dev, void *pData, u32 DataLen)
struct sk_buff *skb;
struct cb_desc *tcb_desc;
- /* Get TCB and local buffer from common pool.
+ /*
+ * Get TCB and local buffer from common pool.
* (It is shared by CmdQ, MgntQ, and USB coalesce DataQ)
*/
skb = dev_alloc_skb(USB_HWDESC_HEADER_LEN + DataLen + 4);
@@ -69,7 +70,8 @@ static void cmpk_count_txstatistic(struct net_device *dev, struct cmd_pkt_tx_fee
pAdapter->HalFunc.GetHwRegHandler(pAdapter, HW_VAR_RF_STATE,
(pu1Byte)(&rtState));
- /* When RF is off, we should not count the packet for hw/sw synchronize
+ /*
+ * When RF is off, we should not count the packet for hw/sw synchronize
* reason, ie. there may be a duration while sw switch is changed and
* hw switch is being changed.
*/
@@ -81,7 +83,8 @@ static void cmpk_count_txstatistic(struct net_device *dev, struct cmd_pkt_tx_fee
if (pAdapter->bInHctTest)
return;
#endif
- /* We can not know the packet length and transmit type:
+ /*
+ * We can not know the packet length and transmit type:
* broadcast or uni or multicast. So the relative statistics
* must be collected in tx feedback info.
*/
@@ -120,7 +123,8 @@ static void cmpk_count_txstatistic(struct net_device *dev, struct cmd_pkt_tx_fee
priv->stats.txfeedbackretry += pstx_fb->retry_cnt;
}
-/*-----------------------------------------------------------------------------
+/*
+ * -----------------------------------------------------------------------------
* Function: cmpk_handle_tx_feedback()
*
* Overview: The function is responsible for extract the message inside TX
@@ -140,7 +144,7 @@ static void cmpk_count_txstatistic(struct net_device *dev, struct cmd_pkt_tx_fee
* When Who Remark
* 05/08/2008 amy Create Version 0 porting from windows code.
*
- *---------------------------------------------------------------------------
+ * ---------------------------------------------------------------------------
*/
static void cmpk_handle_tx_feedback(struct net_device *dev, u8 *pmsg)
{
@@ -150,7 +154,8 @@ static void cmpk_handle_tx_feedback(struct net_device *dev, u8 *pmsg)
priv->stats.txfeedback++;
/* 1. Extract TX feedback info from RFD to temp structure buffer. */
- /* It seems that FW use big endian(MIPS) and DRV use little endian in
+ /*
+ * It seems that FW use big endian(MIPS) and DRV use little endian in
* windows OS. So we have to read the content byte by byte or transfer
* endian type before copy the message copy.
*/
@@ -160,7 +165,8 @@ static void cmpk_handle_tx_feedback(struct net_device *dev, u8 *pmsg)
cmpk_count_txstatistic(dev, &rx_tx_fb);
/* Comment previous method for TX statistic function. */
/* Collect info TX feedback packet to fill TCB. */
- /* We can not know the packet length and transmit type: broadcast or uni
+ /*
+ * We can not know the packet length and transmit type: broadcast or uni
* or multicast.
*/
}
@@ -184,7 +190,8 @@ static void cmdpkt_beacontimerinterrupt_819xusb(struct net_device *dev)
rtl819xusb_beacon_tx(dev, tx_rate); /* HW Beacon */
}
-/*-----------------------------------------------------------------------------
+/*
+ * -----------------------------------------------------------------------------
* Function: cmpk_handle_interrupt_status()
*
* Overview: The function is responsible for extract the message from
@@ -203,7 +210,7 @@ static void cmdpkt_beacontimerinterrupt_819xusb(struct net_device *dev)
* When Who Remark
* 05/12/2008 amy Add this for rtl8192 porting from windows code.
*
- *---------------------------------------------------------------------------
+ * ---------------------------------------------------------------------------
*/
static void cmpk_handle_interrupt_status(struct net_device *dev, u8 *pmsg)
{
@@ -213,7 +220,8 @@ static void cmpk_handle_interrupt_status(struct net_device *dev, u8 *pmsg)
DMESG("---> cmpk_Handle_Interrupt_Status()\n");
/* 1. Extract TX feedback info from RFD to temp structure buffer. */
- /* It seems that FW use big endian(MIPS) and DRV use little endian in
+ /*
+ * It seems that FW use big endian(MIPS) and DRV use little endian in
* windows OS. So we have to read the content byte by byte or transfer
* endian type before copy the message copy.
*/
@@ -248,7 +256,8 @@ static void cmpk_handle_interrupt_status(struct net_device *dev, u8 *pmsg)
DMESG("<---- cmpk_handle_interrupt_status()\n");
}
-/*-----------------------------------------------------------------------------
+/*
+ * -----------------------------------------------------------------------------
* Function: cmpk_handle_query_config_rx()
*
* Overview: The function is responsible for extract the message from
@@ -266,14 +275,15 @@ static void cmpk_handle_interrupt_status(struct net_device *dev, u8 *pmsg)
* When Who Remark
* 05/12/2008 amy Create Version 0 porting from windows code.
*
- *---------------------------------------------------------------------------
+ * ---------------------------------------------------------------------------
*/
static void cmpk_handle_query_config_rx(struct net_device *dev, u8 *pmsg)
{
struct cmpk_query_cfg rx_query_cfg;
/* 1. Extract TX feedback info from RFD to temp structure buffer. */
- /* It seems that FW use big endian(MIPS) and DRV use little endian in
+ /*
+ * It seems that FW use big endian(MIPS) and DRV use little endian in
* windows OS. So we have to read the content byte by byte or transfer
* endian type before copy the message copy.
*/
@@ -288,7 +298,8 @@ static void cmpk_handle_query_config_rx(struct net_device *dev, u8 *pmsg)
(pmsg[14] << 8) | (pmsg[15] << 0);
}
-/*-----------------------------------------------------------------------------
+/*
+ * -----------------------------------------------------------------------------
* Function: cmpk_count_tx_status()
*
* Overview: Count aggregated tx status from firmwar of one type rx command
@@ -304,7 +315,7 @@ static void cmpk_handle_query_config_rx(struct net_device *dev, u8 *pmsg)
* When Who Remark
* 05/12/2008 amy Create Version 0 porting from windows code.
*
- *---------------------------------------------------------------------------
+ * ---------------------------------------------------------------------------
*/
static void cmpk_count_tx_status(struct net_device *dev,
cmpk_tx_status_t *pstx_status)
@@ -318,7 +329,8 @@ static void cmpk_count_tx_status(struct net_device *dev,
pAdapter->HalFunc.GetHwRegHandler(pAdapter, HW_VAR_RF_STATE,
(pu1Byte)(&rtState));
- /* When RF is off, we should not count the packet for hw/sw synchronize
+ /*
+ * When RF is off, we should not count the packet for hw/sw synchronize
* reason, ie. there may be a duration while sw switch is changed and
* hw switch is being changed.
*/
@@ -351,7 +363,8 @@ static void cmpk_count_tx_status(struct net_device *dev,
priv->stats.last_packet_rate = pstx_status->rate;
}
-/*-----------------------------------------------------------------------------
+/*
+ * -----------------------------------------------------------------------------
* Function: cmpk_handle_tx_status()
*
* Overview: Firmware add a new tx feedback status to reduce rx command
@@ -367,7 +380,7 @@ static void cmpk_count_tx_status(struct net_device *dev,
* When Who Remark
* 05/12/2008 amy Create Version 0 porting from windows code.
*
- *---------------------------------------------------------------------------
+ * ---------------------------------------------------------------------------
*/
static void cmpk_handle_tx_status(struct net_device *dev, u8 *pmsg)
{
@@ -378,7 +391,8 @@ static void cmpk_handle_tx_status(struct net_device *dev, u8 *pmsg)
cmpk_count_tx_status(dev, &rx_tx_sts);
}
-/*-----------------------------------------------------------------------------
+/*
+ * -----------------------------------------------------------------------------
* Function: cmpk_handle_tx_rate_history()
*
* Overview: Firmware add a new tx rate history
@@ -393,7 +407,7 @@ static void cmpk_handle_tx_status(struct net_device *dev, u8 *pmsg)
* When Who Remark
* 05/12/2008 amy Create Version 0 porting from windows code.
*
- *---------------------------------------------------------------------------
+ * ---------------------------------------------------------------------------
*/
static void cmpk_handle_tx_rate_history(struct net_device *dev, u8 *pmsg)
{
@@ -407,7 +421,8 @@ static void cmpk_handle_tx_rate_history(struct net_device *dev, u8 *pmsg)
pAdapter->HalFunc.GetHwRegHandler(pAdapter, HW_VAR_RF_STATE,
(pu1Byte)(&rtState));
- /* When RF is off, we should not count the packet for hw/sw synchronize
+ /*
+ * When RF is off, we should not count the packet for hw/sw synchronize
* reason, ie. there may be a duration while sw switch is changed and
* hw switch is being changed.
*/
@@ -417,7 +432,8 @@ static void cmpk_handle_tx_rate_history(struct net_device *dev, u8 *pmsg)
ptemp = (u32 *)pmsg;
- /* Do endian transfer to word alignment(16 bits) for windows system.
+ /*
+ * Do endian transfer to word alignment(16 bits) for windows system.
* You must do different endian transfer for linux and MAC OS
*/
for (i = 0; i < (length/4); i++) {
@@ -447,7 +463,8 @@ static void cmpk_handle_tx_rate_history(struct net_device *dev, u8 *pmsg)
}
}
-/*-----------------------------------------------------------------------------
+/*
+ * -----------------------------------------------------------------------------
* Function: cmpk_message_handle_rx()
*
* Overview: In the function, we will capture different RX command packet
@@ -466,7 +483,7 @@ static void cmpk_handle_tx_rate_history(struct net_device *dev, u8 *pmsg)
* When Who Remark
* 05/06/2008 amy Create Version 0 porting from windows code.
*
- *---------------------------------------------------------------------------
+ * ---------------------------------------------------------------------------
*/
u32 cmpk_message_handle_rx(struct net_device *dev,
struct ieee80211_rx_stats *pstats)
@@ -476,7 +493,8 @@ u32 cmpk_message_handle_rx(struct net_device *dev,
u8 element_id;
u8 *pcmd_buff;
- /* 0. Check inpt arguments. It is a command queue message or
+ /*
+ * 0. Check inpt arguments. It is a command queue message or
* pointer is null.
*/
if (pstats == NULL)
@@ -491,11 +509,13 @@ u32 cmpk_message_handle_rx(struct net_device *dev,
/* 3. Read command packet element id and length. */
element_id = pcmd_buff[0];
- /* 4. Check every received command packet content according to different
+ /*
+ * 4. Check every received command packet content according to different
* element type. Because FW may aggregate RX command packet to
* minimize transmit time between DRV and FW.
*/
- /* Add a counter to prevent the lock in the loop from being held too
+ /*
+ * Add a counter to prevent the lock in the loop from being held too
* long
*/
while (total_length > 0 && exe_cnt++ < 100) {
@@ -524,7 +544,8 @@ u32 cmpk_message_handle_rx(struct net_device *dev,
break;
case RX_TX_PER_PKT_FEEDBACK:
- /* You must at lease add a switch case element here,
+ /*
+ * You must at lease add a switch case element here,
* Otherwise, we will jump to default case.
*/
cmd_length = CMPK_RX_TX_FB_SIZE;
diff --git a/drivers/staging/rtl8192u/r819xU_cmdpkt.h b/drivers/staging/rtl8192u/r819xU_cmdpkt.h
index be45cd609d67..6498b4625254 100644
--- a/drivers/staging/rtl8192u/r819xU_cmdpkt.h
+++ b/drivers/staging/rtl8192u/r819xU_cmdpkt.h
@@ -52,7 +52,8 @@ struct cmd_pkt_tx_feedback {
u16 duration;
};
-/* 2. RX side: Interrupt status packet. It includes Beacon State,
+/*
+ * 2. RX side: Interrupt status packet. It includes Beacon State,
* Beacon Timer Interrupt and other useful information in MAC ISR Reg.
*/
struct cmd_pkt_interrupt_status {
@@ -80,15 +81,17 @@ struct cmd_pkt_set_configuration {
u32 mask;
};
-/* 4. Both side : TX/RX query configuration packet. The query structure is the
+/*
+ * 4. Both side : TX/RX query configuration packet. The query structure is the
* same as set configuration.
*/
#define cmpk_query_cfg cmd_pkt_set_configuration
/* 5. Multi packet feedback status. */
typedef struct tag_tx_stats_feedback {
- /* For endian transfer --> Driver will not the same as
- * firmware structure.
+ /*
+ * For endian transfer --> Driver will not the same as
+ * firmware structure.
*/
/* DW 0 */
u16 reserve1;
@@ -154,7 +157,8 @@ typedef struct tag_tx_rate_history {
/* DW 3-6 */
u16 ofdm[8];
- /* DW 7-14 BW=0 SG=0
+ /*
+ * DW 7-14 BW=0 SG=0
* DW 15-22 BW=1 SG=0
* DW 23-30 BW=0 SG=1
* DW 31-38 BW=1 SG=1
diff --git a/drivers/staging/rtl8192u/r819xU_firmware.c b/drivers/staging/rtl8192u/r819xU_firmware.c
index 153d4ee0ec07..e9511b829b05 100644
--- a/drivers/staging/rtl8192u/r819xU_firmware.c
+++ b/drivers/staging/rtl8192u/r819xU_firmware.c
@@ -61,7 +61,8 @@ static bool fw_download_code(struct net_device *dev, u8 *code_virtual_address,
}
- /* Allocate skb buffer to contain firmware info and tx descriptor info
+ /*
+ * Allocate skb buffer to contain firmware info and tx descriptor info
* add 4 to avoid packet appending overflow.
*/
skb = dev_alloc_skb(USB_HWDESC_HEADER_LEN + frag_length + 4);
@@ -273,7 +274,8 @@ bool init_firmware(struct net_device *dev)
}
/* Download image file */
- /* The firmware download process is just as following,
+ /*
+ * The firmware download process is just as following,
* 1. that is each packet will be segmented and inserted to the wait queue.
* 2. each packet segment will be put in the skb_buff packet.
* 3. each skb_buff packet data content will already include the firmware info
@@ -288,7 +290,8 @@ bool init_firmware(struct net_device *dev)
switch (init_step) {
case FW_INIT_STEP0_BOOT:
- /* Download boot
+ /*
+ * Download boot
* initialize command descriptor.
* will set polling bit when firmware code is also configured
*/
diff --git a/drivers/staging/rtl8192u/r819xU_phy.c b/drivers/staging/rtl8192u/r819xU_phy.c
index 5f04afe53d69..5445ea092130 100644
--- a/drivers/staging/rtl8192u/r819xU_phy.c
+++ b/drivers/staging/rtl8192u/r819xU_phy.c
@@ -426,7 +426,8 @@ static void phy_FwRFSerialWrite(struct net_device *dev,
u8 time = 0;
u32 tmp;
- /* Firmware RF Write control.
+ /*
+ * Firmware RF Write control.
* We can not execute the scheme in the initial step.
* Otherwise, RF-R/W will waste much time.
* This is only for site survey.
@@ -445,7 +446,8 @@ static void phy_FwRFSerialWrite(struct net_device *dev,
/* 6. Write operation. We can not write if bit 31 is 1. */
read_nic_dword(dev, QPNR, &tmp);
while (tmp & 0x80000000) {
- /* If FW can not finish RF-R/W for more than ?? times.
+ /*
+ * If FW can not finish RF-R/W for more than ?? times.
* We must reset FW.
*/
if (time++ < 100) {
@@ -455,11 +457,13 @@ static void phy_FwRFSerialWrite(struct net_device *dev,
break;
}
}
- /* 7. No matter check bit. We always force the write.
+ /*
+ * 7. No matter check bit. We always force the write.
* Because FW will not accept the command.
*/
write_nic_dword(dev, QPNR, data);
- /* According to test, we must delay 20us to wait firmware
+ /*
+ * According to test, we must delay 20us to wait firmware
* to finish RF write operation.
*/
/* We support delay in firmware side now. */
@@ -828,7 +832,8 @@ static void rtl8192_BB_Config_ParaFile(struct net_device *dev)
reg_u32);
}
- /* Check if the CCK HighPower is turned ON.
+ /*
+ * Check if the CCK HighPower is turned ON.
* This is used to calculate PWDB.
*/
priv->bCckHighPower = (u8)rtl8192_QueryBBReg(dev,
@@ -847,7 +852,8 @@ static void rtl8192_BB_Config_ParaFile(struct net_device *dev)
void rtl8192_BBConfig(struct net_device *dev)
{
rtl8192_InitBBRFRegDef(dev);
- /* config BB&RF. As hardCode based initialization has not been well
+ /*
+ * config BB&RF. As hardCode based initialization has not been well
* implemented, so use file first.
* FIXME: should implement it for hardcode?
*/
@@ -1168,7 +1174,8 @@ bool rtl8192_SetRFPowerState(struct net_device *dev,
case RF_8256:
switch (pHalData->eRFPowerState) {
case eRfOff:
- /* If Rf off reason is from IPS,
+ /*
+ * If Rf off reason is from IPS,
* LED should blink with no link
*/
if (pMgntInfo->RfOffReason == RF_CHANGE_BY_IPS)
@@ -1179,7 +1186,8 @@ bool rtl8192_SetRFPowerState(struct net_device *dev,
break;
case eRfOn:
- /* Turn on RF we are still linked, which might
+ /*
+ * Turn on RF we are still linked, which might
* happen when we quickly turn off and on HW RF.
*/
if (pMgntInfo->bMediaConnect)
@@ -1274,7 +1282,8 @@ static u8 rtl8192_phy_SwChnlStepByStep(struct net_device *dev, u8 channel,
__func__, *stage, *step, channel);
if (!is_legal_channel(priv->ieee80211, channel)) {
RT_TRACE(COMP_ERR, "set to illegal channel: %d\n", channel);
- /* return true to tell upper caller function this channel
+ /*
+ * return true to tell upper caller function this channel
* setting is finished! Or it will in while loop.
*/
return true;
@@ -1621,7 +1630,8 @@ void rtl8192_SetBWModeWorkItem(struct net_device *dev)
break;
}
- /* Skip over setting of J-mode in BB register here.
+ /*
+ * Skip over setting of J-mode in BB register here.
* Default value is "None J mode".
*/
diff --git a/drivers/staging/rtl8192u/r819xU_phy.h b/drivers/staging/rtl8192u/r819xU_phy.h
index 8c2933264407..b1974671fdc9 100644
--- a/drivers/staging/rtl8192u/r819xU_phy.h
+++ b/drivers/staging/rtl8192u/r819xU_phy.h
@@ -8,8 +8,8 @@
#define MAX_POSTCMD_CNT 16
enum baseband_config_type {
- BASEBAND_CONFIG_PHY_REG = 0, //Radio Path A
- BASEBAND_CONFIG_AGC_TAB = 1, //Radio Path B
+ BASEBAND_CONFIG_PHY_REG = 0, /* Radio Path A */
+ BASEBAND_CONFIG_AGC_TAB = 1, /* Radio Path B */
};
enum switch_chan_cmd_id {
diff --git a/drivers/staging/rtl8192u/r819xU_phyreg.h b/drivers/staging/rtl8192u/r819xU_phyreg.h
index dc9ddf100eab..af7d9b8fee7f 100644
--- a/drivers/staging/rtl8192u/r819xU_phyreg.h
+++ b/drivers/staging/rtl8192u/r819xU_phyreg.h
@@ -96,7 +96,8 @@
#define rTxAGC_Mcs15_Mcs12 0xe1c
-/* RF
+/*
+ * RF
* Zebra1
*/
#define rZebra1_Channel 0x7
@@ -104,7 +105,8 @@
/* Zebra4 */
#define rGlobalCtrl 0
-/* Bit Mask
+/*
+ * Bit Mask
* page-8
*/
#define bRFMOD 0x1
@@ -126,7 +128,8 @@
/* page e */
#define bTxAGCRateCCK 0x7f00
-/* RF
+/*
+ * RF
* Zebra1
*/
#define bZebra1_ChannelNum 0xf80
--
2.17.1
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
