This patch adds support to burn the fuses on the i.MX8MM. https://www.nxp.com/webapp/Download?colCode=IMX8MMRM The i.MX8MM is similar to i.MX6 processors in terms of addressing and clock setup. The documentation specifies 60 discreet OTP registers but, the fusemap address space encompasses up to 256 registers. We map the entire putative 256 OTP registers. Signed-off-by: Bryan O'Donoghue <pure.logic@xxxxxxxxxxxxxxxxx> --- drivers/nvmem/imx-ocotp.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/nvmem/imx-ocotp.c b/drivers/nvmem/imx-ocotp.c index 2c5009691dd6..189fd5f334f4 100644 --- a/drivers/nvmem/imx-ocotp.c +++ b/drivers/nvmem/imx-ocotp.c @@ -479,6 +479,12 @@ static const struct ocotp_params imx8mq_params = { .set_timing = imx_ocotp_set_imx7_timing, }; +static const struct ocotp_params imx8mm_params = { + .nregs = 256, + .bank_address_words = 0, + .set_timing = imx_ocotp_set_imx6_timing, +}; + static const struct of_device_id imx_ocotp_dt_ids[] = { { .compatible = "fsl,imx6q-ocotp", .data = &imx6q_params }, { .compatible = "fsl,imx6sl-ocotp", .data = &imx6sl_params }, @@ -489,6 +495,7 @@ static const struct of_device_id imx_ocotp_dt_ids[] = { { .compatible = "fsl,imx6sll-ocotp", .data = &imx6sll_params }, { .compatible = "fsl,imx7ulp-ocotp", .data = &imx7ulp_params }, { .compatible = "fsl,imx8mq-ocotp", .data = &imx8mq_params }, + { .compatible = "fsl,imx8mm-ocotp", .data = &imx8mm_params }, { }, }; MODULE_DEVICE_TABLE(of, imx_ocotp_dt_ids); -- 2.21.0 _______________________________________________ devel mailing list devel@xxxxxxxxxxxxxxxxxxxxxx http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
