[PATCH] staging: remove redundant 'default n' from Kconfig

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



'default n' is the default value for any bool or tristate Kconfig
setting so there is no need to write it explicitly.

Also since commit f467c5640c29 ("kconfig: only write '# CONFIG_FOO
is not set' for visible symbols") the Kconfig behavior is the same
regardless of 'default n' being present or not:

    ...
    One side effect of (and the main motivation for) this change is making
    the following two definitions behave exactly the same:
    
        config FOO
                bool
    
        config FOO
                bool
                default n
    
    With this change, neither of these will generate a
    '# CONFIG_FOO is not set' line (assuming FOO isn't selected/implied).
    That might make it clearer to people that a bare 'default n' is
    redundant.
    ...

Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
---
 drivers/staging/Kconfig                    |    1 -
 drivers/staging/android/Kconfig            |    2 --
 drivers/staging/axis-fifo/Kconfig          |    1 -
 drivers/staging/gs_fpgaboot/Kconfig        |    1 -
 drivers/staging/media/Kconfig              |    1 -
 drivers/staging/media/rockchip/vpu/Kconfig |    1 -
 drivers/staging/most/Kconfig               |    1 -
 drivers/staging/rtl8192e/Kconfig           |    1 -
 drivers/staging/wilc1000/Kconfig           |    1 -
 drivers/staging/wlan-ng/Kconfig            |    1 -
 10 files changed, 11 deletions(-)

Index: b/drivers/staging/Kconfig
===================================================================
--- a/drivers/staging/Kconfig	2019-04-12 12:04:20.794128367 +0200
+++ b/drivers/staging/Kconfig	2019-04-12 12:04:20.786128367 +0200
@@ -1,7 +1,6 @@
 # SPDX-License-Identifier: GPL-2.0
 menuconfig STAGING
 	bool "Staging drivers"
-	default n
 	---help---
 	  This option allows you to select a number of drivers that are
 	  not of the "normal" Linux kernel quality level.  These drivers
Index: b/drivers/staging/android/Kconfig
===================================================================
--- a/drivers/staging/android/Kconfig	2019-04-12 12:04:20.794128367 +0200
+++ b/drivers/staging/android/Kconfig	2019-04-12 12:04:20.786128367 +0200
@@ -5,7 +5,6 @@ if ANDROID
 
 config ASHMEM
 	bool "Enable the Anonymous Shared Memory Subsystem"
-	default n
 	depends on SHMEM
 	help
 	  The ashmem subsystem is a new shared memory allocator, similar to
@@ -17,7 +16,6 @@ config ASHMEM
 
 config ANDROID_VSOC
 	tristate "Android Virtual SoC support"
-	default n
 	depends on PCI_MSI
 	help
 	  This option adds support for the Virtual SoC driver needed to boot
Index: b/drivers/staging/axis-fifo/Kconfig
===================================================================
--- a/drivers/staging/axis-fifo/Kconfig	2019-04-12 12:04:20.794128367 +0200
+++ b/drivers/staging/axis-fifo/Kconfig	2019-04-12 12:04:59.734129348 +0200
@@ -5,7 +5,6 @@
 config XIL_AXIS_FIFO
 	tristate "Xilinx AXI-Stream FIFO IP core driver"
 	depends on OF
-	default n
 	help
 	  This adds support for the Xilinx AXI-Stream
 	  FIFO IP core driver.
Index: b/drivers/staging/gs_fpgaboot/Kconfig
===================================================================
--- a/drivers/staging/gs_fpgaboot/Kconfig	2019-04-12 12:04:20.794128367 +0200
+++ b/drivers/staging/gs_fpgaboot/Kconfig	2019-04-12 12:04:20.790128367 +0200
@@ -4,6 +4,5 @@
 #
 config GS_FPGABOOT
 	tristate "Xilinx FPGA firmware download module"
-	default n
 	help
 	  Xilinx FPGA firmware download module
Index: b/drivers/staging/media/Kconfig
===================================================================
--- a/drivers/staging/media/Kconfig	2019-04-12 12:04:20.794128367 +0200
+++ b/drivers/staging/media/Kconfig	2019-04-12 12:05:05.470129493 +0200
@@ -1,7 +1,6 @@
 # SPDX-License-Identifier: GPL-2.0
 menuconfig STAGING_MEDIA
 	bool "Media staging drivers"
-	default n
 	help
 	  This option allows you to select a number of media drivers that
 	  don't have the "normal" Linux kernel quality level.
Index: b/drivers/staging/media/rockchip/vpu/Kconfig
===================================================================
--- a/drivers/staging/media/rockchip/vpu/Kconfig	2019-04-12 12:04:20.794128367 +0200
+++ b/drivers/staging/media/rockchip/vpu/Kconfig	2019-04-12 12:04:20.794128367 +0200
@@ -6,7 +6,6 @@ config VIDEO_ROCKCHIP_VPU
 	select VIDEOBUF2_DMA_CONTIG
 	select VIDEOBUF2_VMALLOC
 	select V4L2_MEM2MEM_DEV
-	default n
 	help
 	  Support for the Video Processing Unit present on Rockchip SoC,
 	  which accelerates video and image encoding and decoding.
Index: b/drivers/staging/most/Kconfig
===================================================================
--- a/drivers/staging/most/Kconfig	2019-04-12 12:04:20.794128367 +0200
+++ b/drivers/staging/most/Kconfig	2019-04-12 12:04:20.794128367 +0200
@@ -2,7 +2,6 @@
 menuconfig MOST
         tristate "MOST support"
 	depends on HAS_DMA
-        default n
         ---help---
 	  Say Y here if you want to enable MOST support.
 	  This driver needs at least one additional component to enable the
Index: b/drivers/staging/rtl8192e/Kconfig
===================================================================
--- a/drivers/staging/rtl8192e/Kconfig	2019-04-12 12:04:20.794128367 +0200
+++ b/drivers/staging/rtl8192e/Kconfig	2019-04-12 12:04:20.794128367 +0200
@@ -2,7 +2,6 @@
 config RTLLIB
 	tristate "Support for rtllib wireless devices"
 	depends on WLAN && m
-	default n
 	select LIB80211
 	help
 	  If you have a wireless card that uses rtllib, say
Index: b/drivers/staging/wilc1000/Kconfig
===================================================================
--- a/drivers/staging/wilc1000/Kconfig	2019-04-12 12:04:20.794128367 +0200
+++ b/drivers/staging/wilc1000/Kconfig	2019-04-12 12:04:20.794128367 +0200
@@ -34,7 +34,6 @@ config WILC1000_SPI
 config WILC1000_HW_OOB_INTR
 	bool "WILC1000 out of band interrupt"
 	depends on WILC1000_SDIO
-	default n
 	help
 	  This option enables out-of-band interrupt support for the WILC1000
 	  chipset. This OOB interrupt is intended to provide a faster interrupt
Index: b/drivers/staging/wlan-ng/Kconfig
===================================================================
--- a/drivers/staging/wlan-ng/Kconfig	2019-04-12 12:04:20.794128367 +0200
+++ b/drivers/staging/wlan-ng/Kconfig	2019-04-12 12:04:20.794128367 +0200
@@ -4,7 +4,6 @@ config PRISM2_USB
 	depends on WLAN && USB && CFG80211
 	select WIRELESS_EXT
 	select WEXT_PRIV
-	default n
 	help
 	  This is the wlan-ng prism 2.5/3 USB driver for a wide range of
 	  old USB wireless devices.
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel



[Index of Archives]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux