All defined P2P* in wifi.h are unused in the driver code,
so remove them.
Signed-off-by: Michael Straube <straube.linux@xxxxxxxxx>
---
drivers/staging/rtl8188eu/include/wifi.h | 110 -----------------------
1 file changed, 110 deletions(-)
diff --git a/drivers/staging/rtl8188eu/include/wifi.h b/drivers/staging/rtl8188eu/include/wifi.h
index 5e91b9428c16..5f6b04b5016c 100644
--- a/drivers/staging/rtl8188eu/include/wifi.h
+++ b/drivers/staging/rtl8188eu/include/wifi.h
@@ -667,116 +667,6 @@ enum ht_cap_ampdu_factor {
#define WPS_ASSOC_STATE_ASSOCIATION_FAILURE 0x03
#define WPS_ASSOC_STATE_IP_FAILURE 0x04
-/* =====================P2P Section===================== */
-/* For P2P */
-#define P2POUI 0x506F9A09
-
-/* P2P Attribute ID */
-#define P2P_ATTR_STATUS 0x00
-#define P2P_ATTR_MINOR_REASON_CODE 0x01
-#define P2P_ATTR_CAPABILITY 0x02
-#define P2P_ATTR_DEVICE_ID 0x03
-#define P2P_ATTR_GO_INTENT 0x04
-#define P2P_ATTR_CONF_TIMEOUT 0x05
-#define P2P_ATTR_LISTEN_CH 0x06
-#define P2P_ATTR_GROUP_BSSID 0x07
-#define P2P_ATTR_EX_LISTEN_TIMING 0x08
-#define P2P_ATTR_INTENTED_IF_ADDR 0x09
-#define P2P_ATTR_MANAGEABILITY 0x0A
-#define P2P_ATTR_CH_LIST 0x0B
-#define P2P_ATTR_NOA 0x0C
-#define P2P_ATTR_DEVICE_INFO 0x0D
-#define P2P_ATTR_GROUP_INFO 0x0E
-#define P2P_ATTR_GROUP_ID 0x0F
-#define P2P_ATTR_INTERFACE 0x10
-#define P2P_ATTR_OPERATING_CH 0x11
-#define P2P_ATTR_INVITATION_FLAGS 0x12
-
-/* Value of Status Attribute */
-#define P2P_STATUS_SUCCESS 0x00
-#define P2P_STATUS_FAIL_INFO_UNAVAILABLE 0x01
-#define P2P_STATUS_FAIL_INCOMPATIBLE_PARAM 0x02
-#define P2P_STATUS_FAIL_LIMIT_REACHED 0x03
-#define P2P_STATUS_FAIL_INVALID_PARAM 0x04
-#define P2P_STATUS_FAIL_REQUEST_UNABLE 0x05
-#define P2P_STATUS_FAIL_PREVOUS_PROTO_ERR 0x06
-#define P2P_STATUS_FAIL_NO_COMMON_CH 0x07
-#define P2P_STATUS_FAIL_UNKNOWN_P2PGROUP 0x08
-#define P2P_STATUS_FAIL_BOTH_GOINTENT_15 0x09
-#define P2P_STATUS_FAIL_INCOMPATIBLE_PROVSION 0x0A
-#define P2P_STATUS_FAIL_USER_REJECT 0x0B
-
-/* Value of Invitation Flags Attribute */
-
-/* Value of Device Capability Bitmap */
-#define P2P_DEVCAP_SERVICE_DISCOVERY BIT(0)
-#define P2P_DEVCAP_CLIENT_DISCOVERABILITY BIT(1)
-#define P2P_DEVCAP_CONCURRENT_OPERATION BIT(2)
-#define P2P_DEVCAP_INFRA_MANAGED BIT(3)
-#define P2P_DEVCAP_DEVICE_LIMIT BIT(4)
-#define P2P_DEVCAP_INVITATION_PROC BIT(5)
-
-/* Value of Group Capability Bitmap */
-#define P2P_GRPCAP_GO BIT(0)
-#define P2P_GRPCAP_PERSISTENT_GROUP BIT(1)
-#define P2P_GRPCAP_GROUP_LIMIT BIT(2)
-#define P2P_GRPCAP_INTRABSS BIT(3)
-#define P2P_GRPCAP_CROSS_CONN BIT(4)
-#define P2P_GRPCAP_PERSISTENT_RECONN BIT(5)
-#define P2P_GRPCAP_GROUP_FORMATION BIT(6)
-
-/* P2P Public Action Frame (Management Frame) */
-#define P2P_PUB_ACTION_ACTION 0x09
-
-/* P2P Public Action Frame Type */
-#define P2P_GO_NEGO_REQ 0
-#define P2P_GO_NEGO_RESP 1
-#define P2P_GO_NEGO_CONF 2
-#define P2P_INVIT_REQ 3
-#define P2P_INVIT_RESP 4
-#define P2P_DEVDISC_REQ 5
-#define P2P_DEVDISC_RESP 6
-#define P2P_PROVISION_DISC_REQ 7
-#define P2P_PROVISION_DISC_RESP 8
-
-/* P2P Action Frame Type */
-#define P2P_NOTICE_OF_ABSENCE 0
-#define P2P_PRESENCE_REQUEST 1
-#define P2P_PRESENCE_RESPONSE 2
-#define P2P_GO_DISC_REQUEST 3
-
-#define P2P_PROVISIONING_SCAN_CNT 3
-
-/* default value, used when: (1)p2p disabled or (2)p2p enabled
- * but only do 1 scan phase
- */
-#define P2P_FINDPHASE_EX_NONE 0
-/* used when p2p enabled and want to do 1 scan phase and
- * P2P_FINDPHASE_EX_MAX-1 find phase
- */
-#define P2P_FINDPHASE_EX_FULL 1
-#define P2P_FINDPHASE_EX_SOCIAL_FIRST (P2P_FINDPHASE_EX_FULL+1)
-#define P2P_FINDPHASE_EX_MAX 4
-#define P2P_FINDPHASE_EX_SOCIAL_LAST P2P_FINDPHASE_EX_MAX
-
-/* 5 seconds timeout for sending the provision discovery request */
-#define P2P_PROVISION_TIMEOUT 5000
-/* 3 seconds timeout for sending the prov disc request concurrent mode */
-#define P2P_CONCURRENT_PROVISION_TIME 3000
-/* 5 seconds timeout for receiving the group negotiation response */
-#define P2P_GO_NEGO_TIMEOUT 5000
-/* 3 seconds timeout for sending the negotiation request under concurrent mode */
-#define P2P_CONCURRENT_GO_NEGO_TIME 3000
-/* 100ms */
-#define P2P_TX_PRESCAN_TIMEOUT 100
-/* 5 seconds timeout for sending the invitation request */
-#define P2P_INVITE_TIMEOUT 5000
-/* 3 seconds timeout for sending the invitation request under concurrent mode */
-#define P2P_CONCURRENT_INVITE_TIME 3000
-/* 25 seconds timeout to reset the scan channel (based on channel plan) */
-#define P2P_RESET_SCAN_CH 25000
-#define P2P_MAX_INTENT 15
-
/* WPS Configuration Method */
#define WPS_CM_NONE 0x0000
#define WPS_CM_LABEL 0x0004
--
2.21.0
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
