Re: [RFC PATCH] x86, hyperv: fix kernel panic when kexec on HyperV VM

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Kairui Song <kasong@xxxxxxxxxx> writes:

> When hypercalls is used for sending IPIs, kexec will fail with a kernel
> panic like this:
>
> kexec_core: Starting new kernel
> BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
> PGD 8000000057995067 P4D 8000000057995067 PUD 57990067 PMD 0
> Oops: 0002 [#1] SMP PTI
> CPU: 0 PID: 1016 Comm: kexec Not tainted 4.18.16-300.fc29.x86_64 #1
> Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v3.0 03/02/2018
> RIP: 0010:0xffffc9000001d000
> Code: Bad RIP value.
> RSP: 0018:ffffc9000495bcf0 EFLAGS: 00010046
> RAX: 0000000000000000 RBX: ffffc9000001d000 RCX: 0000000000020015
> RDX: 000000007f553000 RSI: 0000000000000000 RDI: ffffc9000495bd28
> RBP: 0000000000000002 R08: 0000000000000000 R09: ffffffff8238aaf8
> R10: ffffffff8238aae0 R11: 0000000000000000 R12: ffff88007f553008
> R13: 0000000000000001 R14: ffff8800ff553000 R15: 0000000000000000
> FS:  00007ff5c0e67b80(0000) GS:ffff880078e00000(0000) knlGS:0000000000000000
> CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> CR2: ffffc9000001cfd6 CR3: 000000004f678006 CR4: 00000000003606f0
> Call Trace:
>  ? __send_ipi_mask+0x1c6/0x2d0
>  ? hv_send_ipi_mask_allbutself+0x6d/0xb0
>  ? mp_save_irq+0x70/0x70
>  ? __ioapic_read_entry+0x32/0x50
>  ? ioapic_read_entry+0x39/0x50
>  ? clear_IO_APIC_pin+0xb8/0x110
>  ? native_stop_other_cpus+0x6e/0x170
>  ? native_machine_shutdown+0x22/0x40
>  ? kernel_kexec+0x136/0x156
>  ? __do_sys_reboot+0x1be/0x210
>  ? kmem_cache_free+0x1b1/0x1e0
>  ? __dentry_kill+0x10b/0x160
>  ? _cond_resched+0x15/0x30
>  ? dentry_kill+0x47/0x170
>  ? dput.part.34+0xc6/0x100
>  ? __fput+0x147/0x220
>  ? _cond_resched+0x15/0x30
>  ? task_work_run+0x38/0xa0
>  ? do_syscall_64+0x5b/0x160
>  ? entry_SYSCALL_64_after_hwframe+0x44/0xa9
> Modules linked in: ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 xt_conntrack ebtable_nat ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_mangle ip6table_raw ip6table_security iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat iptable_mangle iptable_raw iptable_security nf_conntrack ip_set nfnetlink ebtable_filter ebtables ip6table_filter ip6_tables sunrpc vfat fat crct10dif_pclmul crc32_pclmul ghash_clmulni_intel intel_rapl_perf hv_balloon joydev xfs libcrc32c hv_storvsc serio_raw scsi_transport_fc hv_netvsc hyperv_keyboard hyperv_fb hid_hyperv crc32c_intel hv_vmbus
>
> That's because HyperV's machine_ops.shutdown allow registering a hook to
> be called upon shutdown, hv_vmbus will invalidate the hypercall page
> using this hook. But hv_hypercall_pg is still pointing to this invalid
> page, any hypercall based operation will panic the kernel. And kexec
> progress will send IPIs for stopping CPUs.
>
> This fix this by simply reset hv_hypercall_pg to NULL when the page is
> revoked to avoid any misuse. IPI sending will fallback to use non
> hypercall based method. This only happens on kexec / kdump so setting to
> NULL should be good enough.
>
> Fixes: 68bb7bfb7985 ("X86/Hyper-V: Enable IPI enlightenments")
> Signed-off-by: Kairui Song <kasong@xxxxxxxxxx>
>
> ---
>
> I'm not sure about the details of what happened after the
>
> wrmsrl(HV_X64_MSR_HYPERCALL, hypercall_msr.as_uint64);
>
> But this fix should be valid, please let me know if I get anything
> wrong, thanks.
>
>  arch/x86/hyperv/hv_init.c | 4 ++++
>  1 file changed, 4 insertions(+)
>
> diff --git a/arch/x86/hyperv/hv_init.c b/arch/x86/hyperv/hv_init.c
> index 7abb09e2eeb8..92291c18d716 100644
> --- a/arch/x86/hyperv/hv_init.c
> +++ b/arch/x86/hyperv/hv_init.c
> @@ -406,6 +406,10 @@ void hyperv_cleanup(void)
>  	/* Reset our OS id */
>  	wrmsrl(HV_X64_MSR_GUEST_OS_ID, 0);
>  
> +	/* Cleanup page reference before reset the page */
> +	hv_hypercall_pg = NULL;
> +	wmb();
> +
>  	/* Reset the hypercall page */
>  	hypercall_msr.as_uint64 = 0;
>  	wrmsrl(HV_X64_MSR_HYPERCALL, hypercall_msr.as_uint64);

This all looks correct to me. We need to reset HV_X64_MSR_HYPERCALL as
the hypercall page will remain 'special' otherwise so dumping it may
have undesired consequences (though, I think that last time I checked it
it was possible to read from this page without issues - and this should
be enough for kdump. But I'd rather keep things as they are as one
additional wrmsr doesn't hurt).

-- 
Vitaly
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel



[Index of Archives]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux