From: Beniamin Bia <biabeniamin@xxxxxxxxx>
The values from platform data were replaced by statically values.
This was just a intermediate step of taking this driver out of staging and
load data from device tree.
Signed-off-by: Beniamin Bia <beniamin.bia@xxxxxxxxxx>
---
Changes in v2:
- The platform data structure was removed and the values are
written directly
drivers/staging/iio/frequency/ad9834.c | 21 +++++++------------
drivers/staging/iio/frequency/ad9834.h | 28 --------------------------
2 files changed, 7 insertions(+), 42 deletions(-)
diff --git a/drivers/staging/iio/frequency/ad9834.c b/drivers/staging/iio/frequency/ad9834.c
index 995acdd7c942..f4f5eaa15e30 100644
--- a/drivers/staging/iio/frequency/ad9834.c
+++ b/drivers/staging/iio/frequency/ad9834.c
@@ -391,16 +391,11 @@ static const struct iio_info ad9833_info = {
static int ad9834_probe(struct spi_device *spi)
{
- struct ad9834_platform_data *pdata = dev_get_platdata(&spi->dev);
struct ad9834_state *st;
struct iio_dev *indio_dev;
struct regulator *reg;
int ret;
- if (!pdata) {
- dev_dbg(&spi->dev, "no platform data?\n");
- return -ENODEV;
- }
reg = devm_regulator_get(&spi->dev, "avdd");
if (IS_ERR(reg))
@@ -420,7 +415,7 @@ static int ad9834_probe(struct spi_device *spi)
spi_set_drvdata(spi, indio_dev);
st = iio_priv(indio_dev);
mutex_init(&st->lock);
- st->mclk = pdata->mclk;
+ st->mclk = 25000000;
st->spi = spi;
st->devid = spi_get_device_id(spi)->driver_data;
st->reg = reg;
@@ -456,11 +451,9 @@ static int ad9834_probe(struct spi_device *spi)
spi_message_add_tail(&st->freq_xfer[1], &st->freq_msg);
st->control = AD9834_B28 | AD9834_RESET;
+ st->control |= AD9834_DIV2;
- if (!pdata->en_div2)
- st->control |= AD9834_DIV2;
-
- if (!pdata->en_signbit_msb_out && (st->devid == ID_AD9834))
+ if (st->devid == ID_AD9834)
st->control |= AD9834_SIGN_PIB;
st->data = cpu_to_be16(AD9834_REG_CMD | st->control);
@@ -470,19 +463,19 @@ static int ad9834_probe(struct spi_device *spi)
goto error_disable_reg;
}
- ret = ad9834_write_frequency(st, AD9834_REG_FREQ0, pdata->freq0);
+ ret = ad9834_write_frequency(st, AD9834_REG_FREQ0, 1000000);
if (ret)
goto error_disable_reg;
- ret = ad9834_write_frequency(st, AD9834_REG_FREQ1, pdata->freq1);
+ ret = ad9834_write_frequency(st, AD9834_REG_FREQ1, 5000000);
if (ret)
goto error_disable_reg;
- ret = ad9834_write_phase(st, AD9834_REG_PHASE0, pdata->phase0);
+ ret = ad9834_write_phase(st, AD9834_REG_PHASE0, 512);
if (ret)
goto error_disable_reg;
- ret = ad9834_write_phase(st, AD9834_REG_PHASE1, pdata->phase1);
+ ret = ad9834_write_phase(st, AD9834_REG_PHASE1, 1024);
if (ret)
goto error_disable_reg;
diff --git a/drivers/staging/iio/frequency/ad9834.h b/drivers/staging/iio/frequency/ad9834.h
index ae620f38eb49..da7e83ceedad 100644
--- a/drivers/staging/iio/frequency/ad9834.h
+++ b/drivers/staging/iio/frequency/ad9834.h
@@ -8,32 +8,4 @@
#ifndef IIO_DDS_AD9834_H_
#define IIO_DDS_AD9834_H_
-/*
- * TODO: struct ad7887_platform_data needs to go into include/linux/iio
- */
-
-/**
- * struct ad9834_platform_data - platform specific information
- * @mclk: master clock in Hz
- * @freq0: power up freq0 tuning word in Hz
- * @freq1: power up freq1 tuning word in Hz
- * @phase0: power up phase0 value [0..4095] correlates with 0..2PI
- * @phase1: power up phase1 value [0..4095] correlates with 0..2PI
- * @en_div2: digital output/2 is passed to the SIGN BIT OUT pin
- * @en_signbit_msb_out: the MSB (or MSB/2) of the DAC data is connected to the
- * SIGN BIT OUT pin. en_div2 controls whether it is the MSB
- * or MSB/2 that is output. if en_signbit_msb_out=false,
- * the on-board comparator is connected to SIGN BIT OUT
- */
-
-struct ad9834_platform_data {
- unsigned int mclk;
- unsigned int freq0;
- unsigned int freq1;
- unsigned short phase0;
- unsigned short phase1;
- bool en_div2;
- bool en_signbit_msb_out;
-};
-
#endif /* IIO_DDS_AD9834_H_ */
--
2.17.1
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
