[PATCH 018/961] staging: brcm80211: replaced some ieee80211 preprocessor constants part 1

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Roland Vossen <rvossen@xxxxxxxxxxxx>

Code cleanup.

Reviewed-by: Arend van Spriel <arend@xxxxxxxxxxxx>
Signed-off-by: Roland Vossen <rvossen@xxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxx>
---
 drivers/staging/brcm80211/include/proto/802.11.h |   10 ++-----
 drivers/staging/brcm80211/sys/wlc_ampdu.c        |    3 +-
 drivers/staging/brcm80211/sys/wlc_bsscfg.h       |    2 +-
 drivers/staging/brcm80211/sys/wlc_mac80211.c     |   30 +++++++++++-----------
 drivers/staging/brcm80211/sys/wlc_pub.h          |    2 +-
 5 files changed, 22 insertions(+), 25 deletions(-)

diff --git a/drivers/staging/brcm80211/include/proto/802.11.h b/drivers/staging/brcm80211/include/proto/802.11.h
index 5adabfb..9ddf42a 100644
--- a/drivers/staging/brcm80211/include/proto/802.11.h
+++ b/drivers/staging/brcm80211/include/proto/802.11.h
@@ -22,14 +22,11 @@
 #define DOT11_A3_HDR_LEN		24
 #define DOT11_A4_HDR_LEN		30
 #define DOT11_MAC_HDR_LEN		DOT11_A3_HDR_LEN
-#define DOT11_FCS_LEN			4
 #define DOT11_ICV_AES_LEN		8
 #define DOT11_QOS_LEN			2
 
 #define DOT11_IV_MAX_LEN		8
 
-#define DOT11_MAX_SSID_LEN		32
-
 #define DOT11_DEFAULT_RTS_LEN		2347
 
 #define DOT11_MIN_FRAG_LEN		256
@@ -131,7 +128,6 @@ typedef struct wme_param_ie wme_param_ie_t;
 #define FC_TYPE_SHIFT		2
 #define FC_SUBTYPE_MASK		0xF0
 #define FC_SUBTYPE_SHIFT	4
-#define FC_MOREFRAG		0x400
 
 #define SEQNUM_SHIFT		4
 #define SEQNUM_MAX		0x1000
@@ -150,12 +146,12 @@ typedef struct wme_param_ie wme_param_ie_t;
 
 #define FC_SUBTYPE_ANY_QOS(s)		(((s) & 8) != 0)
 
-#define FC_KIND_MASK		(FC_TYPE_MASK | FC_SUBTYPE_MASK)
+#define FC_KIND_MASK		(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)
 
 #define FC_KIND(t, s)	(((t) << FC_TYPE_SHIFT) | ((s) << FC_SUBTYPE_SHIFT))
 
-#define FC_SUBTYPE(fc)	(((fc) & FC_SUBTYPE_MASK) >> FC_SUBTYPE_SHIFT)
-#define FC_TYPE(fc)	(((fc) & FC_TYPE_MASK) >> FC_TYPE_SHIFT)
+#define FC_SUBTYPE(fc)	(((fc) & IEEE80211_FCTL_STYPE) >> FC_SUBTYPE_SHIFT)
+#define FC_TYPE(fc)	(((fc) & IEEE80211_FCTL_FTYPE) >> FC_TYPE_SHIFT)
 
 #define FC_PROBE_REQ	FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_PROBE_REQ)
 #define FC_PROBE_RESP	FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_PROBE_RESP)
diff --git a/drivers/staging/brcm80211/sys/wlc_ampdu.c b/drivers/staging/brcm80211/sys/wlc_ampdu.c
index d4c1ee5..8e10112 100644
--- a/drivers/staging/brcm80211/sys/wlc_ampdu.c
+++ b/drivers/staging/brcm80211/sys/wlc_ampdu.c
@@ -67,7 +67,8 @@
 #define TX_SEQ_TO_INDEX(seq) ((seq) % AMPDU_TX_BA_MAX_WSIZE)
 
 /* max possible overhead per mpdu in the ampdu; 3 is for roundup if needed */
-#define AMPDU_MAX_MPDU_OVERHEAD (DOT11_FCS_LEN + DOT11_ICV_AES_LEN + AMPDU_DELIMITER_LEN + 3 \
+#define AMPDU_MAX_MPDU_OVERHEAD (FCS_LEN + DOT11_ICV_AES_LEN +\
+	AMPDU_DELIMITER_LEN + 3\
 	+ DOT11_A4_HDR_LEN + DOT11_QOS_LEN + DOT11_IV_MAX_LEN)
 
 #ifdef BCMDBG
diff --git a/drivers/staging/brcm80211/sys/wlc_bsscfg.h b/drivers/staging/brcm80211/sys/wlc_bsscfg.h
index 901a0a3..0bb4a21 100644
--- a/drivers/staging/brcm80211/sys/wlc_bsscfg.h
+++ b/drivers/staging/brcm80211/sys/wlc_bsscfg.h
@@ -63,7 +63,7 @@ struct wlc_bsscfg {
 	bool sup_auth_pending;	/* flag for auth timeout */
 #endif
 	u8 SSID_len;		/* the length of SSID */
-	u8 SSID[DOT11_MAX_SSID_LEN];	/* SSID string */
+	u8 SSID[IEEE80211_MAX_SSID_LEN]; /* SSID string */
 	struct scb *bcmc_scb[MAXBANDS];	/* one bcmc_scb per band */
 	s8 _idx;		/* the index of this bsscfg,
 				 * assigned at wlc_bsscfg_alloc()
diff --git a/drivers/staging/brcm80211/sys/wlc_mac80211.c b/drivers/staging/brcm80211/sys/wlc_mac80211.c
index 755b73d..b26fcf3 100644
--- a/drivers/staging/brcm80211/sys/wlc_mac80211.c
+++ b/drivers/staging/brcm80211/sys/wlc_mac80211.c
@@ -67,7 +67,7 @@
  * buffer length needed for wlc_format_ssid
  * 32 SSID chars, max of 4 chars for each SSID char "\xFF", plus NULL.
  */
-#define SSID_FMT_BUF_LEN	((4 * DOT11_MAX_SSID_LEN) + 1)
+#define SSID_FMT_BUF_LEN	((4 * IEEE80211_MAX_SSID_LEN) + 1)
 
 #define	TIMER_INTERVAL_WATCHDOG	1000	/* watchdog timer, in unit of ms */
 #define	TIMER_INTERVAL_RADIOCHK	800	/* radio monitor timer, in unit of ms */
@@ -4963,8 +4963,8 @@ int wlc_format_ssid(char *buf, const unsigned char ssid[], uint ssid_len)
 	char *p = buf;
 	char *endp = buf + SSID_FMT_BUF_LEN;
 
-	if (ssid_len > DOT11_MAX_SSID_LEN)
-		ssid_len = DOT11_MAX_SSID_LEN;
+	if (ssid_len > IEEE80211_MAX_SSID_LEN)
+		ssid_len = IEEE80211_MAX_SSID_LEN;
 
 	for (i = 0; i < ssid_len; i++) {
 		c = (uint) ssid[i];
@@ -5708,7 +5708,7 @@ wlc_d11hdrs_mac80211(struct wlc_info *wlc, struct ieee80211_hw *hw,
 
 	/* compute length of frame in bytes for use in PLCP computations */
 	len = pkttotlen(osh, p);
-	phylen = len + DOT11_FCS_LEN;
+	phylen = len + FCS_LEN;
 
 	/* If WEP enabled, add room in phylen for the additional bytes of
 	 * ICV which MAC generates.  We do NOT add the additional bytes to
@@ -6104,9 +6104,9 @@ wlc_d11hdrs_mac80211(struct wlc_info *wlc, struct ieee80211_hw *hw,
 		ASSERT(IS_ALIGNED((unsigned long)txh->RTSPhyHeader, sizeof(u16)));
 		rts_plcp = txh->RTSPhyHeader;
 		if (use_cts)
-			rts_phylen = DOT11_CTS_LEN + DOT11_FCS_LEN;
+			rts_phylen = DOT11_CTS_LEN + FCS_LEN;
 		else
-			rts_phylen = DOT11_RTS_LEN + DOT11_FCS_LEN;
+			rts_phylen = DOT11_RTS_LEN + FCS_LEN;
 
 		wlc_compute_plcp(wlc, rts_rspec[0], rts_phylen, rts_plcp);
 
@@ -6627,7 +6627,7 @@ wlc_dotxstatus(struct wlc_info *wlc, tx_status_t *txs, u32 frm_tx2)
 	tx_rts_count =
 	    (txs->status & TX_STATUS_RTS_RTX_MASK) >> TX_STATUS_RTS_RTX_SHIFT;
 
-	lastframe = (fc & FC_MOREFRAG) == 0;
+	lastframe = (fc & IEEE80211_FCTL_MOREFRAGS) == 0;
 
 	if (!lastframe) {
 		WL_ERROR("Not last frame!\n");
@@ -6945,7 +6945,7 @@ wlc_recvctl(struct wlc_info *wlc, struct osl_info *osh, d11rxhdr_t *rxh,
 	prep_mac80211_status(wlc, rxh, p, &rx_status);
 
 	/* mac header+body length, exclude CRC and plcp header */
-	len_mpdu = p->len - D11_PHY_HDR_LEN - DOT11_FCS_LEN;
+	len_mpdu = p->len - D11_PHY_HDR_LEN - FCS_LEN;
 	skb_pull(p, D11_PHY_HDR_LEN);
 	__skb_trim(p, len_mpdu);
 
@@ -7259,7 +7259,7 @@ wlc_calc_ba_time(struct wlc_info *wlc, ratespec_t rspec, u8 preamble_type)
 	/* BA len == 32 == 16(ctl hdr) + 4(ba len) + 8(bitmap) + 4(fcs) */
 	return wlc_calc_frame_time(wlc, rspec, preamble_type,
 				   (DOT11_BA_LEN + DOT11_BA_BITMAP_LEN +
-				    DOT11_FCS_LEN));
+				    FCS_LEN));
 }
 
 static uint BCMFASTPATH
@@ -7278,7 +7278,7 @@ wlc_calc_ack_time(struct wlc_info *wlc, ratespec_t rspec, u8 preamble_type)
 	/* ACK frame len == 14 == 2(fc) + 2(dur) + 6(ra) + 4(fcs) */
 	dur =
 	    wlc_calc_frame_time(wlc, rspec, preamble_type,
-				(DOT11_ACK_LEN + DOT11_FCS_LEN));
+				(DOT11_ACK_LEN + FCS_LEN));
 	return dur;
 }
 
@@ -7647,7 +7647,7 @@ wlc_bcn_prb_template(struct wlc_info *wlc, uint type, ratespec_t bcn_rspec,
 	if (type == FC_BEACON && !MBSS_BCN_ENAB(cfg)) {
 		/* fill in PLCP */
 		wlc_compute_plcp(wlc, bcn_rspec,
-				 (DOT11_MAC_HDR_LEN + body_len + DOT11_FCS_LEN),
+				 (DOT11_MAC_HDR_LEN + body_len + FCS_LEN),
 				 (u8 *) plcp);
 
 	}
@@ -7757,13 +7757,13 @@ void wlc_shm_ssid_upd(struct wlc_info *wlc, wlc_bsscfg_t *cfg)
 {
 	u8 *ssidptr = cfg->SSID;
 	u16 base = M_SSID;
-	u8 ssidbuf[DOT11_MAX_SSID_LEN];
+	u8 ssidbuf[IEEE80211_MAX_SSID_LEN];
 
 	/* padding the ssid with zero and copy it into shm */
-	memset(ssidbuf, 0, DOT11_MAX_SSID_LEN);
+	memset(ssidbuf, 0, IEEE80211_MAX_SSID_LEN);
 	bcopy(ssidptr, ssidbuf, cfg->SSID_len);
 
-	wlc_copyto_shm(wlc, base, ssidbuf, DOT11_MAX_SSID_LEN);
+	wlc_copyto_shm(wlc, base, ssidbuf, IEEE80211_MAX_SSID_LEN);
 
 	if (!MBSS_BCN_ENAB(cfg))
 		wlc_write_shm(wlc, M_SSIDLEN, (u16) cfg->SSID_len);
@@ -7812,7 +7812,7 @@ wlc_bss_update_probe_resp(struct wlc_info *wlc, wlc_bsscfg_t *cfg, bool suspend)
 		 * Use the actual frame length covered by the PLCP header for the call to
 		 * wlc_mod_prb_rsp_rate_table() by subtracting the PLCP len and adding the FCS.
 		 */
-		len += (-D11_PHY_HDR_LEN + DOT11_FCS_LEN);
+		len += (-D11_PHY_HDR_LEN + FCS_LEN);
 		wlc_mod_prb_rsp_rate_table(wlc, (u16) len);
 
 		if (suspend)
diff --git a/drivers/staging/brcm80211/sys/wlc_pub.h b/drivers/staging/brcm80211/sys/wlc_pub.h
index 2ada360..549dd5f 100644
--- a/drivers/staging/brcm80211/sys/wlc_pub.h
+++ b/drivers/staging/brcm80211/sys/wlc_pub.h
@@ -134,7 +134,7 @@ struct rsn_parms {
  * buffer length needed for wlc_format_ssid
  * 32 SSID chars, max of 4 chars for each SSID char "\xFF", plus NULL.
  */
-#define SSID_FMT_BUF_LEN	((4 * DOT11_MAX_SSID_LEN) + 1)
+#define SSID_FMT_BUF_LEN	((4 * IEEE80211_MAX_SSID_LEN) + 1)
 
 #define RSN_FLAGS_SUPPORTED		0x1	/* Flag for rsn_params */
 #define RSN_FLAGS_PREAUTH		0x2	/* Flag for WPA2 rsn_params */
-- 
1.7.4.1

_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel


[Index of Archives]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux