From: Ellwyn C <ellwync@xxxxxxxxxxxxxx>
This is a patch to the unioxx5.c file that fixes the 80 characters limit and
printk warnings found by the checkpatch.pl tool
Signed-off-by: Ellwyn C <ellwync@xxxxxxxxxxxxxx>
---
drivers/staging/comedi/drivers/unioxx5.c | 61 +++++++++++++++++++-----------
1 files changed, 39 insertions(+), 22 deletions(-)
diff --git a/drivers/staging/comedi/drivers/unioxx5.c b/drivers/staging/comedi/drivers/unioxx5.c
index 598884e..0d91f53 100644
--- a/drivers/staging/comedi/drivers/unioxx5.c
+++ b/drivers/staging/comedi/drivers/unioxx5.c
@@ -75,8 +75,10 @@ Devices: [Fastwel] UNIOxx-5 (unioxx5),
/* 'private' structure for each subdevice */
struct unioxx5_subd_priv {
int usp_iobase;
- unsigned char usp_module_type[12]; /* 12 modules. each can be 70L or 73L */
- unsigned char usp_extra_data[12][4]; /* for saving previous written value for analog modules */
+ unsigned char usp_module_type[12];
+ /* 12 modules. each can be 70L or 73L */
+ unsigned char usp_extra_data[12][4];
+ /* for saving previous written value for analog modules */
unsigned char usp_prev_wr_val[3]; /* previous written value */
unsigned char usp_prev_cn_val[3]; /* previous channel value */
};
@@ -99,7 +101,8 @@ static int __unioxx5_digital_write(struct unioxx5_subd_priv *usp,
unsigned int *data, int channel, int minor);
static int __unioxx5_digital_read(struct unioxx5_subd_priv *usp,
unsigned int *data, int channel, int minor);
-/* static void __unioxx5_digital_config(struct unioxx5_subd_priv* usp, int mode); */
+/* static void __unioxx5_digital_config(struct unioxx5_subd_priv* usp, int mode)
+; */
static int __unioxx5_analog_write(struct unioxx5_subd_priv *usp,
unsigned int *data, int channel, int minor);
static int __unioxx5_analog_read(struct unioxx5_subd_priv *usp,
@@ -139,8 +142,10 @@ static int unioxx5_attach(struct comedi_device *dev,
dev->iobase = iobase;
iobase += UNIOXX5_SUBDEV_BASE;
- /* defining number of subdevices and getting they types (it must be 'g01') */
- for (i = n_subd = 0, ba = iobase; i < 4; i++, ba += UNIOXX5_SUBDEV_ODDS) {
+ /* defining number of subdevices and getting they types
+ (it must be 'g01') */
+ for (i = n_subd = 0, ba = iobase; i < 4; i++, ba +=
+ UNIOXX5_SUBDEV_ODDS) {
id = inb(ba + 0xE);
num = inb(ba + 0xF);
@@ -169,7 +174,7 @@ static int unioxx5_attach(struct comedi_device *dev,
return -1;
}
- printk("attached\n");
+ pr_info("attached\n");
return 0;
}
@@ -181,7 +186,8 @@ static int unioxx5_subdev_read(struct comedi_device *dev,
int channel, type;
channel = CR_CHAN(insn->chanspec);
- type = usp->usp_module_type[channel / 2]; /* defining module type(analog or digital) */
+ type = usp->usp_module_type[channel / 2];
+ /* defining module type(analog or digital) */
if (type == MODULE_DIGITAL) {
if (!__unioxx5_digital_read(usp, data, channel, dev->minor))
@@ -202,7 +208,8 @@ static int unioxx5_subdev_write(struct comedi_device *dev,
int channel, type;
channel = CR_CHAN(insn->chanspec);
- type = usp->usp_module_type[channel / 2]; /* defining module type(analog or digital) */
+ type = usp->usp_module_type[channel / 2];
+ /* defining module type(analog or digital) */
if (type == MODULE_DIGITAL) {
if (!__unioxx5_digital_write(usp, data, channel, dev->minor))
@@ -261,9 +268,12 @@ static int unioxx5_insn_config(struct comedi_device *dev,
* change channel type on input or output) *
\* */
outb(1, usp->usp_iobase + 0);
- outb(flags, usp->usp_iobase + channel_offset); /* changes type of _one_ channel */
- outb(0, usp->usp_iobase + 0); /* sets channels bank to 0(allows directly input/output) */
- usp->usp_prev_cn_val[channel_offset - 1] = flags; /* saves written value */
+ outb(flags, usp->usp_iobase + channel_offset);
+ /* changes type of _one_ channel */
+ outb(0, usp->usp_iobase + 0);
+ /* sets channels bank to 0(allows directly input/output) */
+ usp->usp_prev_cn_val[channel_offset - 1] = flags;
+ /* saves written value */
return 0;
}
@@ -304,14 +314,15 @@ static int __unioxx5_subdev_init(struct comedi_subdevice *subdev,
}
usp->usp_iobase = subdev_iobase;
- printk("comedi%d: |", minor);
+ pr_info("comedi%d: |", minor);
/* defining modules types */
for (i = 0; i < 12; i++) {
to = 10000;
__unioxx5_analog_config(usp, i * 2);
- outb(i + 1, subdev_iobase + 5); /* sends channel number to card */
+ outb(i + 1, subdev_iobase + 5);
+ /* sends channel number to card */
outb('H', subdev_iobase + 6); /* requests EEPROM world */
while (!(inb(subdev_iobase + 0) & TxBE))
; /* waits while writting will be allowed */
@@ -331,11 +342,11 @@ static int __unioxx5_subdev_init(struct comedi_subdevice *subdev,
} else
usp->usp_module_type[i] = inb(subdev_iobase + 6);
- printk(" [%d] 0x%02x |", i, usp->usp_module_type[i]);
+ pr_info(" [%d] 0x%02x |", i, usp->usp_module_type[i]);
udelay(1);
}
- printk("\n");
+ pr_info("\n");
/* initial subdevice for digital or analog i/o */
subdev->type = COMEDI_SUBD_DIO;
@@ -346,9 +357,10 @@ static int __unioxx5_subdev_init(struct comedi_subdevice *subdev,
subdev->range_table = &range_digital;
subdev->insn_read = unioxx5_subdev_read;
subdev->insn_write = unioxx5_subdev_write;
- subdev->insn_config = unioxx5_insn_config; /* for digital modules only!!! */
+ subdev->insn_config = unioxx5_insn_config;
+ /* for digital modules only!!! */
- printk("subdevice configured\n");
+ pr_info("subdevice configured\n");
return 0;
}
@@ -367,7 +379,8 @@ static int __unioxx5_digital_write(struct unioxx5_subd_priv *usp,
return 0;
}
- val = usp->usp_prev_wr_val[channel_offset - 1]; /* getting previous written value */
+ val = usp->usp_prev_wr_val[channel_offset - 1];
+ /* getting previous written value */
if (*data)
val |= mask;
@@ -375,7 +388,8 @@ static int __unioxx5_digital_write(struct unioxx5_subd_priv *usp,
val &= ~mask;
outb(val, usp->usp_iobase + channel_offset);
- usp->usp_prev_wr_val[channel_offset - 1] = val; /* saving new written value */
+ usp->usp_prev_wr_val[channel_offset - 1] = val;
+ /* saving new written value */
return 1;
}
@@ -398,7 +412,8 @@ static int __unioxx5_digital_read(struct unioxx5_subd_priv *usp,
*data &= mask;
if (channel_offset > 1)
- channel -= 2 << channel_offset; /* this operation is created for correct readed value to 0 or 1 */
+ channel -= 2 << channel_offset;
+ /* this operation is created for correct readed value to 0 or 1 */
*data >>= channel;
return 1;
@@ -444,7 +459,8 @@ static int __unioxx5_analog_write(struct unioxx5_subd_priv *usp,
usp->usp_extra_data[module][i] = (unsigned char)((*data & 0xFF00) >> 8);
/* while(!((inb(usp->usp_iobase + 0)) & TxBE)); */
- outb(module + 1, usp->usp_iobase + 5); /* sending module number to card(1 .. 12) */
+ outb(module + 1, usp->usp_iobase + 5);
+ /* sending module number to card(1 .. 12) */
outb('W', usp->usp_iobase + 6); /* sends (W)rite command to module */
/* sending for bytes to module(one byte per cycle iteration) */
@@ -475,7 +491,8 @@ static int __unioxx5_analog_read(struct unioxx5_subd_priv *usp,
}
__unioxx5_analog_config(usp, channel);
- outb(module_no + 1, usp->usp_iobase + 5); /* sends module number to card(1 .. 12) */
+ outb(module_no + 1, usp->usp_iobase + 5);
+ /* sends module number to card(1 .. 12) */
outb('V', usp->usp_iobase + 6); /* sends to module (V)erify command */
control = inb(usp->usp_iobase); /* get control register byte */
--
1.7.2.3
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
