From: George Hilliard <thirtythreeforty@xxxxxxxxx> These drivers are useful on other MT76xx SoCs, which have compatible peripherals. The drivers are selectable in Kconfig, but they were quietly excluded from the build because the SOC_MT7621 chip was not selected. So, make the main staging Makefile use the same flags as everything else for these drivers. I have personally confirmed that the mt7621-spi driver works on the MT7688, which was what prompted this change. Cc: devel@xxxxxxxxxxxxxxxxxxxx Cc: Matthias Brugger <matthias.bgg@xxxxxxxxx> Cc: John Crispin <blogic@xxxxxxxxxxx> Signed-off-by: George Hilliard <thirtythreeforty@xxxxxxxxx> --- drivers/staging/Makefile | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile index 5868631e8f1b..50c980c16c0d 100644 --- a/drivers/staging/Makefile +++ b/drivers/staging/Makefile @@ -42,10 +42,10 @@ obj-$(CONFIG_BCM2835_VCHIQ) += vc04_services/ obj-$(CONFIG_DRM_VBOXVIDEO) += vboxvideo/ obj-$(CONFIG_PI433) += pi433/ obj-$(CONFIG_SOC_MT7621) += mt7621-pci/ -obj-$(CONFIG_SOC_MT7621) += mt7621-pinctrl/ -obj-$(CONFIG_SOC_MT7621) += mt7621-spi/ +obj-$(CONFIG_PINCTRL_RT2880) += mt7621-pinctrl/ +obj-$(CONFIG_SPI_MT7621) += mt7621-spi/ obj-$(CONFIG_SOC_MT7621) += mt7621-dma/ -obj-$(CONFIG_SOC_MT7621) += mt7621-mmc/ +obj-$(CONFIG_MTK_MMC) += mt7621-mmc/ obj-$(CONFIG_SOC_MT7621) += mt7621-eth/ obj-$(CONFIG_SOC_MT7621) += mt7621-dts/ obj-$(CONFIG_STAGING_GASKET_FRAMEWORK) += gasket/ -- 2.20.1 _______________________________________________ devel mailing list devel@xxxxxxxxxxxxxxxxxxxxxx http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel