On Tue, 2019-01-08 at 16:15 -0800, Steve Longerbeam wrote: > The function ipu_csi_init_interface() was inverting the F-bit for > NTSC case, in the CCIR_CODE_1/2 registers. The result being that > for NTSC bottom-top field order, the CSI would swap fields and > capture in top-bottom order. > > Instead, base field swap on the field order of the input to the CSI, > and the field order of the requested output. If the input/output > fields are sequential but different, swap fields, otherwise do > not swap. This requires passing both the input and output mbus > frame formats to ipu_csi_init_interface(). > > Move this code to a new private function ipu_csi_set_bt_interlaced_codes() > that programs the CCIR_CODE_1/2 registers for interlaced BT.656 (and > possibly interlaced BT.1120 in the future). > > When detecting input video standard from the input frame width/height, > make sure to double height if input field type is alternate, since > in that case input height only includes lines for one field. > > Signed-off-by: Steve Longerbeam <slongerbeam@xxxxxxxxx> > Reviewed-by: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx> Also Acked-by: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx> to be merged via the media tree regards Philipp _______________________________________________ devel mailing list devel@xxxxxxxxxxxxxxxxxxxxxx http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
