On Sun, Dec 16, 2018 at 08:57:40AM +0100, Sergio Paracuellos wrote:
> +static int ksz_i2c_write(struct ksz_device *dev, u32 reg, u8 *val,
> + unsigned int len)
> +{
> + struct i2c_client *client = dev->priv;
> + unsigned int cnt = len;
> + int i = 0;
> + u8 txb[4];
> +
> + do {
> + txb[i++] = (u8)(*val >> (8 * (cnt - 1)));
^^^^^^^
Can "cnt" be zero from ksz_i2c_set()? If so this loop will corrupt
memory.
> + cnt--;
> + } while (cnt);
> +
> + return ksz_i2c_write_reg(client, reg, txb, len);
> +}
> +
> +static int ksz_i2c_write8(struct ksz_device *dev, u32 reg, u8 value)
> +{
> + return ksz_i2c_write(dev, reg, &value, 1);
> +}
> +
> +static int ksz_i2c_write16(struct ksz_device *dev, u32 reg, u16 value)
> +{
> + value = cpu_to_be16(value);
> + return ksz_i2c_write(dev, reg, (u8 *)&value, 2);
> +}
> +
> +static int ksz_i2c_write24(struct ksz_device *dev, u32 reg, u32 value)
> +{
> + /* make it to big endian 24bit from MSB */
> + value <<= 8;
> + value = cpu_to_be32(value);
> +
> + return ksz_i2c_write(dev, reg, (u8 *)&value, 3);
> +}
> +
> +static int ksz_i2c_write32(struct ksz_device *dev, u32 reg, u32 value)
> +{
> + value = cpu_to_be32(value);
> + return ksz_i2c_write(dev, reg, (u8 *)&value, 4);
> +}
> +
> +static int ksz_i2c_get(struct ksz_device *dev, u32 reg, void *data, size_t len)
> +{
> + return ksz_i2c_read(dev, reg, data, len);
> +}
> +
> +static int ksz_i2c_set(struct ksz_device *dev, u32 reg, void *data, size_t len)
> +{
> + return ksz_i2c_write(dev, reg, data, len);
> +}
> +
> +static const struct ksz_io_ops ksz_i2c_ops = {
> + .read8 = ksz_i2c_read8,
> + .read16 = ksz_i2c_read16,
> + .read24 = ksz_i2c_read24,
> + .read32 = ksz_i2c_read32,
> + .write8 = ksz_i2c_write8,
> + .write16 = ksz_i2c_write16,
> + .write24 = ksz_i2c_write24,
> + .write32 = ksz_i2c_write32,
> + .get = ksz_i2c_get,
> + .set = ksz_i2c_set,
> +};
> +
> +static int ksz_i2c_probe(struct i2c_client *client,
> + const struct i2c_device_id *id)
> +{
> + struct ksz_device *dev;
> + int ret;
> +
> + dev = ksz_switch_alloc(&client->dev, &ksz_i2c_ops, client);
> + if (!dev)
> + return -ENOMEM;
> +
> + if (client->dev.platform_data)
> + dev->pdata = client->dev.platform_data;
> +
> + i2c_set_clientdata(client, dev);
> +
> + ret = ksz9477_switch_register(dev);
> + if (ret) {
> + dev_err(&client->dev, "registering switch (ret: %d)\n", ret);
free dev on this error path?
> + return ret;
> + }
> +
> + return 0;
> +}
> +
regards,
dan carpenter
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
