On Sat, 8 Dec 2018 16:19:08 -0200
Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx> wrote:
> Set a single voltage regulator for all voltage references.
> Remove voltage reference value from default platafrom data struct.
>
> Signed-off-by: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
> Signed-off-by: Gabriel Capella <gabriel@xxxxxxxxxxx>
> Co-Developed-by: Gabriel Capella <gabriel@xxxxxxxxxxx>
Applied to the togreg branch of iio.git and pushed out as testing
for the autobuilders to play with it.
Thanks,
Jonathan
> ---
> drivers/staging/iio/impedance-analyzer/ad5933.c | 14 ++++++--------
> 1 file changed, 6 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/staging/iio/impedance-analyzer/ad5933.c b/drivers/staging/iio/impedance-analyzer/ad5933.c
> index 9e52384f5370..730bc397a26b 100644
> --- a/drivers/staging/iio/impedance-analyzer/ad5933.c
> +++ b/drivers/staging/iio/impedance-analyzer/ad5933.c
> @@ -91,7 +91,6 @@
>
> struct ad5933_platform_data {
> unsigned long ext_clk_hz;
> - unsigned short vref_mv;
> };
>
> struct ad5933_state {
> @@ -113,7 +112,6 @@ struct ad5933_state {
> };
>
> static struct ad5933_platform_data ad5933_default_pdata = {
> - .vref_mv = 3300,
> };
>
> #define AD5933_CHANNEL(_type, _extend_name, _info_mask_separate, _address, \
> @@ -691,7 +689,7 @@ static void ad5933_work(struct work_struct *work)
> static int ad5933_probe(struct i2c_client *client,
> const struct i2c_device_id *id)
> {
> - int ret, voltage_uv = 0;
> + int ret;
> struct ad5933_platform_data *pdata = dev_get_platdata(&client->dev);
> struct ad5933_state *st;
> struct iio_dev *indio_dev;
> @@ -718,12 +716,12 @@ static int ad5933_probe(struct i2c_client *client,
> dev_err(&client->dev, "Failed to enable specified VDD supply\n");
> return ret;
> }
> - voltage_uv = regulator_get_voltage(st->reg);
> + ret = regulator_get_voltage(st->reg);
> +
> + if (ret < 0)
> + goto error_disable_reg;
>
> - if (voltage_uv)
> - st->vref_mv = voltage_uv / 1000;
> - else
> - st->vref_mv = pdata->vref_mv;
> + st->vref_mv = ret / 1000;
>
> if (pdata->ext_clk_hz) {
> st->mclk_hz = pdata->ext_clk_hz;
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
