The lsb calculation is not masking the correct bits from the user input.
Subtract 1 from (1 << offset) to correctly set up the mask to be applied
to user input.
The lsb register stores its value starting at the bit 7 position.
adt7316_store_DAC() currently assumes the value is at the other end of the
register. Shift the lsb value before storing it in a new variable lsb_reg,
and write this variable to the lsb register.
Signed-off-by: Jeremy Fertic <jeremyfertic@xxxxxxxxx>
---
drivers/staging/iio/addac/adt7316.c | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
diff --git a/drivers/staging/iio/addac/adt7316.c b/drivers/staging/iio/addac/adt7316.c
index b7d12d003ddc..77ef3c209b67 100644
--- a/drivers/staging/iio/addac/adt7316.c
+++ b/drivers/staging/iio/addac/adt7316.c
@@ -1442,7 +1442,7 @@ static ssize_t adt7316_show_DAC(struct adt7316_chip_info *chip,
static ssize_t adt7316_store_DAC(struct adt7316_chip_info *chip,
int channel, const char *buf, size_t len)
{
- u8 msb, lsb, offset;
+ u8 msb, lsb, lsb_reg, offset;
u16 data;
int ret;
@@ -1460,9 +1460,13 @@ static ssize_t adt7316_store_DAC(struct adt7316_chip_info *chip,
return -EINVAL;
if (chip->dac_bits > 8) {
- lsb = data & (1 << offset);
+ lsb = data & ((1 << offset) - 1);
+ if (chip->dac_bits == 12)
+ lsb_reg = lsb << ADT7316_DA_12_BIT_LSB_SHIFT;
+ else
+ lsb_reg = lsb << ADT7316_DA_10_BIT_LSB_SHIFT;
ret = chip->bus.write(chip->bus.client,
- ADT7316_DA_DATA_BASE + channel * 2, lsb);
+ ADT7316_DA_DATA_BASE + channel * 2, lsb_reg);
if (ret)
return -EIO;
}
--
2.19.1
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
