Define-statements, which are not used within the file, are being removed as they add clutter to the code. Because the file is not being included from anywhere else, this has no negative side-effects. Signed-off-by: Alexander Schroth <alexander.schroth@xxxxxx> Signed-off-by: Marco Ammon <marco.ammon@xxxxxx> --- drivers/staging/comedi/drivers/ni_pcidio.c | 56 ---------------------- 1 file changed, 56 deletions(-) diff --git a/drivers/staging/comedi/drivers/ni_pcidio.c b/drivers/staging/comedi/drivers/ni_pcidio.c index b9a0dc6eac44..91ffcfb45f55 100644 --- a/drivers/staging/comedi/drivers/ni_pcidio.c +++ b/drivers/staging/comedi/drivers/ni_pcidio.c @@ -49,22 +49,12 @@ /* defines for the PCI-DIO-32HS */ -#define Window_Address 4 /* W */ #define Interrupt_And_Window_Status 4 /* R */ -#define IntStatus1 BIT(0) -#define IntStatus2 BIT(1) -#define WindowAddressStatus_mask 0x7c #define Master_DMA_And_Interrupt_Control 5 /* W */ -#define InterruptLine(x) ((x) & 3) -#define OpenInt BIT(2) -#define Group_Status 5 /* R */ #define DataLeft BIT(0) -#define Req BIT(2) -#define StopTrig BIT(3) #define Group_1_Flags 6 /* R */ -#define Group_2_Flags 7 /* R */ #define TransferReady BIT(0) #define CountExpired BIT(1) #define Waited BIT(5) @@ -75,43 +65,22 @@ /* #define Paused */ #define Group_1_First_Clear 6 /* W */ -#define Group_2_First_Clear 7 /* W */ #define ClearWaited BIT(3) #define ClearPrimaryTC BIT(4) #define ClearSecondaryTC BIT(5) -#define DMAReset BIT(6) -#define FIFOReset BIT(7) -#define ClearAll 0xf8 #define Group_1_FIFO 8 /* W */ -#define Group_2_FIFO 12 /* W */ #define Transfer_Count 20 -#define Chip_ID_D 24 -#define Chip_ID_I 25 -#define Chip_ID_O 26 #define Chip_Version 27 #define Port_IO(x) (28 + (x)) #define Port_Pin_Directions(x) (32 + (x)) #define Port_Pin_Mask(x) (36 + (x)) -#define Port_Pin_Polarities(x) (40 + (x)) - -#define Master_Clock_Routing 45 -#define RTSIClocking(x) (((x) & 3) << 4) #define Group_1_Second_Clear 46 /* W */ -#define Group_2_Second_Clear 47 /* W */ #define ClearExpired BIT(0) -#define Port_Pattern(x) (48 + (x)) - #define Data_Path 64 -#define FIFOEnableA BIT(0) -#define FIFOEnableB BIT(1) -#define FIFOEnableC BIT(2) -#define FIFOEnableD BIT(3) -#define Funneling(x) (((x) & 3) << 4) -#define GroupDirection BIT(7) #define Protocol_Register_1 65 #define OpMode Protocol_Register_1 @@ -120,8 +89,6 @@ #define Protocol_Register_2 66 #define ClockReg Protocol_Register_2 -#define ClockLine(x) (((x) & 3) << 5) -#define InvertStopTrig BIT(7) #define DataLatching(x) (((x) & 3) << 5) #define Protocol_Register_3 67 @@ -132,27 +99,15 @@ #define Protocol_Register_4 70 #define ReqReg Protocol_Register_4 -#define ReqConditioning(x) (((x) & 7) << 3) #define Protocol_Register_5 71 #define BlockMode Protocol_Register_5 -#define FIFO_Control 72 -#define ReadyLevel(x) ((x) & 7) - #define Protocol_Register_6 73 #define LinePolarities Protocol_Register_6 -#define InvertAck BIT(0) -#define InvertReq BIT(1) -#define InvertClock BIT(2) -#define InvertSerial BIT(3) -#define OpenAck BIT(4) -#define OpenClock BIT(5) #define Protocol_Register_7 74 #define AckSer Protocol_Register_7 -#define AckLine(x) (((x) & 3) << 2) -#define ExchangePins BIT(7) #define Interrupt_Control 75 /* bits same as flags */ @@ -173,20 +128,9 @@ static inline unsigned int secondary_DMAChannel_bits(unsigned int channel) #define Transfer_Size_Control 77 #define TransferWidth(x) ((x) & 3) #define TransferLength(x) (((x) & 3) << 3) -#define RequireRLevel BIT(5) #define Protocol_Register_15 79 #define DAQOptions Protocol_Register_15 -#define StartSource(x) ((x) & 0x3) -#define InvertStart BIT(2) -#define StopSource(x) (((x) & 0x3) << 3) -#define ReqStart BIT(6) -#define PreStart BIT(7) - -#define Pattern_Detection 81 -#define DetectionMethod BIT(0) -#define InvertMatch BIT(1) -#define IE_Pattern_Detection BIT(2) #define Protocol_Register_9 82 #define ReqDelay Protocol_Register_9 -- 2.17.1 _______________________________________________ devel mailing list devel@xxxxxxxxxxxxxxxxxxxxxx http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
