Re: [PATCH v3 2/7] staging:iio:ad2s90: Remove spi setup that should be done via dt

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, 23 Nov 2018 22:23:07 -0200
Matheus Tavares <matheus.bernardino@xxxxxx> wrote:

> The ad2s90 driver currently sets some spi settings (max_speed_hz and
> mode) at ad2s90_probe. Since the maximum frequency is a required element
> in DT binding for spi slave devices and because the spi mode for the
> device can be either (0,0) or (1,1), these settings should be handled
> via device tree, not in the driver's code. This patch removes them from
> the probe function.
> 
> Note: The way in which the mentioned spi settings need to be specified
> on the ad2s90's node of a device tree will be documented in the future
> patch "dt-bindings:iio:resolver: Add docs for ad2s90".
> 
> Signed-off-by: Matheus Tavares <matheus.bernardino@xxxxxx>

Applied,

Thanks,

Jonathan

> ---
> Changes in v3:
>  - none
> 
> Changes in v2:
>  - Rewritten patch message to better explain why the code snippet in
>  question should be removed.
> 
>  drivers/staging/iio/resolver/ad2s90.c | 11 -----------
>  1 file changed, 11 deletions(-)
> 
> diff --git a/drivers/staging/iio/resolver/ad2s90.c b/drivers/staging/iio/resolver/ad2s90.c
> index fdae067ed866..abb9b9147ee6 100644
> --- a/drivers/staging/iio/resolver/ad2s90.c
> +++ b/drivers/staging/iio/resolver/ad2s90.c
> @@ -77,7 +77,6 @@ static int ad2s90_probe(struct spi_device *spi)
>  {
>  	struct iio_dev *indio_dev;
>  	struct ad2s90_state *st;
> -	int ret;
>  
>  	indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
>  	if (!indio_dev)
> @@ -94,16 +93,6 @@ static int ad2s90_probe(struct spi_device *spi)
>  	indio_dev->num_channels = 1;
>  	indio_dev->name = spi_get_device_id(spi)->name;
>  
> -	/* need 600ns between CS and the first falling edge of SCLK */
> -	spi->max_speed_hz = 830000;
> -	spi->mode = SPI_MODE_3;
> -	ret = spi_setup(spi);
> -
> -	if (ret < 0) {
> -		dev_err(&spi->dev, "spi_setup failed!\n");
> -		return ret;
> -	}
> -
>  	return devm_iio_device_register(indio_dev->dev.parent, indio_dev);
>  }
>  

_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel



[Index of Archives]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux