Re: [PATCH v4] staging: olpc_dcon: olpc_dcon_xo_1.c: Switch to the gpio descriptor interface

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi!

> Use the gpiod interface instead of the deprecated old non-descriptor
> interface in olpc_dcon_xo_1.c.
> 
> Signed-off-by: Nishad Kamdar <nishadkamdar@xxxxxxxxx>

You may want to cc: lkundrak@xxxxx, he was doing great work on OLPC
lately...

Best regards,
								Pavel

> ---
> Changes in v4:
>  - Move changelog after signed-off line.
> Changes in v3:
>  - Resolve a few compilation errors.
> Changes in v2:
>  - Resolve a few compilation errors.
>  - Add a level of indirection to read and write gpios.
> ---
>  drivers/staging/olpc_dcon/olpc_dcon_xo_1.c | 90 +++++++++++-----------
>  1 file changed, 47 insertions(+), 43 deletions(-)
> 
> diff --git a/drivers/staging/olpc_dcon/olpc_dcon_xo_1.c b/drivers/staging/olpc_dcon/olpc_dcon_xo_1.c
> index ff145d493e1b..80b8d4153414 100644
> --- a/drivers/staging/olpc_dcon/olpc_dcon_xo_1.c
> +++ b/drivers/staging/olpc_dcon/olpc_dcon_xo_1.c
> @@ -11,35 +11,51 @@
>  #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
>  
>  #include <linux/cs5535.h>
> -#include <linux/gpio.h>
> +#include <linux/gpio/consumer.h>
>  #include <linux/delay.h>
> +#include <linux/i2c.h>
>  #include <asm/olpc.h>
>  
>  #include "olpc_dcon.h"
>  
> +enum dcon_gpios {
> +	OLPC_DCON_STAT0,
> +	OLPC_DCON_STAT1,
> +	OLPC_DCON_IRQ,
> +	OLPC_DCON_LOAD,
> +	OLPC_DCON_BLANK,
> +};
> +
> +struct dcon_gpio {
> +	const char *name;
> +	unsigned long flags;
> +};
> +
> +static const struct dcon_gpio gpios_asis[] = {
> +	[OLPC_DCON_STAT0] = { .name = "dcon_stat0", .flags = GPIOD_ASIS },
> +	[OLPC_DCON_STAT1] = { .name = "dcon_stat1", .flags = GPIOD_ASIS },
> +	[OLPC_DCON_IRQ] = { .name = "dcon_irq", .flags = GPIOD_ASIS },
> +	[OLPC_DCON_LOAD] = { .name = "dcon_load", .flags = GPIOD_ASIS },
> +	[OLPC_DCON_BLANK] = { .name = "dcon_blank", .flags = GPIOD_ASIS },
> +};
> +
> +struct gpio_desc *gpios[5];
> +
>  static int dcon_init_xo_1(struct dcon_priv *dcon)
>  {
>  	unsigned char lob;
> -
> -	if (gpio_request(OLPC_GPIO_DCON_STAT0, "OLPC-DCON")) {
> -		pr_err("failed to request STAT0 GPIO\n");
> -		return -EIO;
> -	}
> -	if (gpio_request(OLPC_GPIO_DCON_STAT1, "OLPC-DCON")) {
> -		pr_err("failed to request STAT1 GPIO\n");
> -		goto err_gp_stat1;
> -	}
> -	if (gpio_request(OLPC_GPIO_DCON_IRQ, "OLPC-DCON")) {
> -		pr_err("failed to request IRQ GPIO\n");
> -		goto err_gp_irq;
> -	}
> -	if (gpio_request(OLPC_GPIO_DCON_LOAD, "OLPC-DCON")) {
> -		pr_err("failed to request LOAD GPIO\n");
> -		goto err_gp_load;
> -	}
> -	if (gpio_request(OLPC_GPIO_DCON_BLANK, "OLPC-DCON")) {
> -		pr_err("failed to request BLANK GPIO\n");
> -		goto err_gp_blank;
> +	int ret, i;
> +	struct dcon_gpio *pin = &gpios_asis[0];
> +
> +	for (i = 0; i < ARRAY_SIZE(gpios_asis); i++) {
> +		gpios[i] = devm_gpiod_get(&dcon->client->dev, pin[i].name,
> +					  pin[i].flags);
> +		if (IS_ERR(gpios[i])) {
> +			ret = PTR_ERR(gpios[i]);
> +			pr_err("failed to request %s GPIO: %d\n", pin[i].name,
> +			       ret);
> +			return ret;
> +		}
>  	}
>  
>  	/* Turn off the event enable for GPIO7 just to be safe */
> @@ -61,12 +77,12 @@ static int dcon_init_xo_1(struct dcon_priv *dcon)
>  	dcon->pending_src = dcon->curr_src;
>  
>  	/* Set the directions for the GPIO pins */
> -	gpio_direction_input(OLPC_GPIO_DCON_STAT0);
> -	gpio_direction_input(OLPC_GPIO_DCON_STAT1);
> -	gpio_direction_input(OLPC_GPIO_DCON_IRQ);
> -	gpio_direction_input(OLPC_GPIO_DCON_BLANK);
> -	gpio_direction_output(OLPC_GPIO_DCON_LOAD,
> -			      dcon->curr_src == DCON_SOURCE_CPU);
> +	gpiod_direction_input(gpios[OLPC_DCON_STAT0]);
> +	gpiod_direction_input(gpios[OLPC_DCON_STAT1]);
> +	gpiod_direction_input(gpios[OLPC_DCON_IRQ]);
> +	gpiod_direction_input(gpios[OLPC_DCON_BLANK]);
> +	gpiod_direction_output(gpios[OLPC_DCON_LOAD],
> +			       dcon->curr_src == DCON_SOURCE_CPU);
>  
>  	/* Set up the interrupt mappings */
>  
> @@ -84,7 +100,7 @@ static int dcon_init_xo_1(struct dcon_priv *dcon)
>  	/* Register the interrupt handler */
>  	if (request_irq(DCON_IRQ, &dcon_interrupt, 0, "DCON", dcon)) {
>  		pr_err("failed to request DCON's irq\n");
> -		goto err_req_irq;
> +		return -EIO;
>  	}
>  
>  	/* Clear INV_EN for GPIO7 (DCONIRQ) */
> @@ -125,18 +141,6 @@ static int dcon_init_xo_1(struct dcon_priv *dcon)
>  	cs5535_gpio_set(OLPC_GPIO_DCON_BLANK, GPIO_EVENTS_ENABLE);
>  
>  	return 0;
> -
> -err_req_irq:
> -	gpio_free(OLPC_GPIO_DCON_BLANK);
> -err_gp_blank:
> -	gpio_free(OLPC_GPIO_DCON_LOAD);
> -err_gp_load:
> -	gpio_free(OLPC_GPIO_DCON_IRQ);
> -err_gp_irq:
> -	gpio_free(OLPC_GPIO_DCON_STAT1);
> -err_gp_stat1:
> -	gpio_free(OLPC_GPIO_DCON_STAT0);
> -	return -EIO;
>  }
>  
>  static void dcon_wiggle_xo_1(void)
> @@ -180,13 +184,13 @@ static void dcon_wiggle_xo_1(void)
>  
>  static void dcon_set_dconload_1(int val)
>  {
> -	gpio_set_value(OLPC_GPIO_DCON_LOAD, val);
> +	gpiod_set_value(gpios[OLPC_DCON_LOAD], val);
>  }
>  
>  static int dcon_read_status_xo_1(u8 *status)
>  {
> -	*status = gpio_get_value(OLPC_GPIO_DCON_STAT0);
> -	*status |= gpio_get_value(OLPC_GPIO_DCON_STAT1) << 1;
> +	*status = gpiod_get_value(gpios[OLPC_DCON_STAT0]);
> +	*status |= gpiod_get_value(gpios[OLPC_DCON_STAT1]) << 1;
>  
>  	/* Clear the negative edge status for GPIO7 */
>  	cs5535_gpio_set(OLPC_GPIO_DCON_IRQ, GPIO_NEGATIVE_EDGE_STS);

-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

Attachment: signature.asc
Description: Digital signature

_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

[Index of Archives]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux