Hi Sakari, thanks for all the reviews. On Wed 21 Nov 2018 at 22:29, Sakari Ailus wrote:
Hi Rui,On Wed, Nov 21, 2018 at 11:15:49AM +0000, Rui Miguel Silva wrote:This add the media entity subdevice and control driver for the i.MX7CMOS Sensor Interface. Signed-off-by: Rui Miguel Silva <rui.silva@xxxxxxxxxx> --- drivers/staging/media/imx/Kconfig | 9 +- drivers/staging/media/imx/Makefile | 2 +drivers/staging/media/imx/imx7-media-csi.c | 1352 ++++++++++++++++++++3 files changed, 1362 insertions(+), 1 deletion(-) create mode 100644 drivers/staging/media/imx/imx7-media-csi.cdiff --git a/drivers/staging/media/imx/Kconfig b/drivers/staging/media/imx/Kconfigindex bfc17de56b17..40a11f988fc6 100644 --- a/drivers/staging/media/imx/Kconfig +++ b/drivers/staging/media/imx/Kconfig @@ -11,7 +11,7 @@ config VIDEO_IMX_MEDIA driver for the i.MX5/6 SOC.if VIDEO_IMX_MEDIA-menu "i.MX5/6 Media Sub devices" +menu "i.MX5/6/7 Media Sub devices"config VIDEO_IMX_CSItristate "i.MX5/6 Camera Sensor Interface driver" @@ -20,5 +20,12 @@ config VIDEO_IMX_CSI ---help---A video4linux camera sensor interface driver for i.MX5/6. +config VIDEO_IMX7_CSI+ tristate "i.MX7 Camera Sensor Interface driver" + depends on VIDEO_IMX_MEDIA && VIDEO_DEV && I2CIf you need V4L2 fwnode, you should select V4L2_FWNODE. (I ignore if it'salready selected by VIDEO_IMX_MEDIA.)
Yes it is selected by VIDEO_IMX_MEDIA.
+ default y + ---help--- + A video4linux camera sensor interface driver for i.MX7. + endmenu endifdiff --git a/drivers/staging/media/imx/Makefile b/drivers/staging/media/imx/Makefileindex a30b3033f9a3..074f016d3519 100644 --- a/drivers/staging/media/imx/Makefile +++ b/drivers/staging/media/imx/Makefile@@ -12,3 +12,5 @@ obj-$(CONFIG_VIDEO_IMX_MEDIA) += imx-media-ic.o obj-$(CONFIG_VIDEO_IMX_CSI) += imx-media-csi.oobj-$(CONFIG_VIDEO_IMX_CSI) += imx6-mipi-csi2.o + +obj-$(CONFIG_VIDEO_IMX7_CSI) += imx7-media-csi.odiff --git a/drivers/staging/media/imx/imx7-media-csi.c b/drivers/staging/media/imx/imx7-media-csi.cnew file mode 100644 index 000000000000..ec5a20880bb6 --- /dev/null +++ b/drivers/staging/media/imx/imx7-media-csi.c @@ -0,0 +1,1352 @@ +// SPDX-License-Identifier: GPL +/* + * V4L2 Capture CSI Subdev for Freescale i.MX7 SOC + * + * Copyright (c) 2018 Linaro Ltd + * + */ + +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/gcd.h> +#include <linux/interrupt.h> +#include <linux/mfd/syscon.h> +#include <linux/module.h> +#include <linux/of_graph.h> +#include <linux/pinctrl/consumer.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/types.h> + +#include <media/v4l2-ctrls.h> +#include <media/v4l2-device.h> +#include <media/v4l2-event.h> +#include <media/v4l2-fwnode.h> +#include <media/v4l2-mc.h> +#include <media/v4l2-subdev.h> +#include <media/videobuf2-dma-contig.h> + +#include <media/imx.h> +#include "imx-media.h" + +#define IMX7_CSI_PAD_SINK 0 +#define IMX7_CSI_PAD_SRC 1 +#define IMX7_CSI_PADS_NUM 2 + +/* reset values */ +#define CSICR1_RESET_VAL 0x40000800 +#define CSICR2_RESET_VAL 0x0 +#define CSICR3_RESET_VAL 0x0 + +/* csi control reg 1 */ +#define BIT_SWAP16_EN BIT(31) +#define BIT_EXT_VSYNC BIT(30) +#define BIT_EOF_INT_EN BIT(29) +#define BIT_PRP_IF_EN BIT(28) +#define BIT_CCIR_MODE BIT(27) +#define BIT_COF_INT_EN BIT(26) +#define BIT_SF_OR_INTEN BIT(25) +#define BIT_RF_OR_INTEN BIT(24) +#define BIT_SFF_DMA_DONE_INTEN BIT(22) +#define BIT_STATFF_INTEN BIT(21) +#define BIT_FB2_DMA_DONE_INTEN BIT(20) +#define BIT_FB1_DMA_DONE_INTEN BIT(19) +#define BIT_RXFF_INTEN BIT(18) +#define BIT_SOF_POL BIT(17) +#define BIT_SOF_INTEN BIT(16) +#define BIT_MCLKDIV (0xF << 12) +#define BIT_HSYNC_POL BIT(11) +#define BIT_CCIR_EN BIT(10) +#define BIT_MCLKEN BIT(9) +#define BIT_FCC BIT(8) +#define BIT_PACK_DIR BIT(7) +#define BIT_CLR_STATFIFO BIT(6) +#define BIT_CLR_RXFIFO BIT(5) +#define BIT_GCLK_MODE BIT(4) +#define BIT_INV_DATA BIT(3) +#define BIT_INV_PCLK BIT(2) +#define BIT_REDGE BIT(1) +#define BIT_PIXEL_BIT BIT(0) + +#define SHIFT_MCLKDIV 12 + +/* control reg 3 */ +#define BIT_FRMCNT (0xFFFF << 16) +#define BIT_FRMCNT_RST BIT(15) +#define BIT_DMA_REFLASH_RFF BIT(14) +#define BIT_DMA_REFLASH_SFF BIT(13) +#define BIT_DMA_REQ_EN_RFF BIT(12) +#define BIT_DMA_REQ_EN_SFF BIT(11) +#define BIT_STATFF_LEVEL (0x7 << 8) +#define BIT_HRESP_ERR_EN BIT(7) +#define BIT_RXFF_LEVEL (0x7 << 4) +#define BIT_TWO_8BIT_SENSOR BIT(3) +#define BIT_ZERO_PACK_EN BIT(2) +#define BIT_ECC_INT_EN BIT(1) +#define BIT_ECC_AUTO_EN BIT(0) + +#define SHIFT_FRMCNT 16 +#define SHIFT_RXFIFO_LEVEL 4 + +/* csi status reg */ +#define BIT_ADDR_CH_ERR_INT BIT(28) +#define BIT_FIELD0_INT BIT(27) +#define BIT_FIELD1_INT BIT(26) +#define BIT_SFF_OR_INT BIT(25) +#define BIT_RFF_OR_INT BIT(24) +#define BIT_DMA_TSF_DONE_SFF BIT(22) +#define BIT_STATFF_INT BIT(21) +#define BIT_DMA_TSF_DONE_FB2 BIT(20) +#define BIT_DMA_TSF_DONE_FB1 BIT(19) +#define BIT_RXFF_INT BIT(18) +#define BIT_EOF_INT BIT(17) +#define BIT_SOF_INT BIT(16) +#define BIT_F2_INT BIT(15) +#define BIT_F1_INT BIT(14) +#define BIT_COF_INT BIT(13) +#define BIT_HRESP_ERR_INT BIT(7) +#define BIT_ECC_INT BIT(1) +#define BIT_DRDY BIT(0) + +/* csi control reg 18 */ +#define BIT_CSI_HW_ENABLE BIT(31) +#define BIT_MIPI_DATA_FORMAT_RAW8 (0x2a << 25) +#define BIT_MIPI_DATA_FORMAT_RAW10 (0x2b << 25) +#define BIT_MIPI_DATA_FORMAT_RAW12 (0x2c << 25) +#define BIT_MIPI_DATA_FORMAT_RAW14 (0x2d << 25) +#define BIT_MIPI_DATA_FORMAT_YUV422_8B (0x1e << 25) +#define BIT_MIPI_DATA_FORMAT_MASK (0x3F << 25) +#define BIT_MIPI_DATA_FORMAT_OFFSET 25 +#define BIT_DATA_FROM_MIPI BIT(22) +#define BIT_MIPI_YU_SWAP BIT(21) +#define BIT_MIPI_DOUBLE_CMPNT BIT(20) +#define BIT_BASEADDR_CHG_ERR_EN BIT(9) +#define BIT_BASEADDR_SWITCH_SEL BIT(5) +#define BIT_BASEADDR_SWITCH_EN BIT(4) +#define BIT_PARALLEL24_EN BIT(3) +#define BIT_DEINTERLACE_EN BIT(2) +#define BIT_TVDECODER_IN_EN BIT(1) +#define BIT_NTSC_EN BIT(0) + +#define CSI_MCLK_VF 1 +#define CSI_MCLK_ENC 2 +#define CSI_MCLK_RAW 4 +#define CSI_MCLK_I2C 8 + +#define CSI_CSICR1 0x0 +#define CSI_CSICR2 0x4 +#define CSI_CSICR3 0x8 +#define CSI_STATFIFO 0xC +#define CSI_CSIRXFIFO 0x10 +#define CSI_CSIRXCNT 0x14 +#define CSI_CSISR 0x18 + +#define CSI_CSIDBG 0x1C +#define CSI_CSIDMASA_STATFIFO 0x20 +#define CSI_CSIDMATS_STATFIFO 0x24 +#define CSI_CSIDMASA_FB1 0x28 +#define CSI_CSIDMASA_FB2 0x2C +#define CSI_CSIFBUF_PARA 0x30 +#define CSI_CSIIMAG_PARA 0x34 + +#define CSI_CSICR18 0x48 +#define CSI_CSICR19 0x4c + +struct imx7_csi { + struct device *dev; + struct imx_media_dev *md; + struct v4l2_subdev sd; + struct imx_media_video_dev *vdev; + struct imx_media_dev *imxmd; + struct media_pad pad[IMX7_CSI_PADS_NUM]; + + struct mutex lock; + spinlock_t irqlock; + + struct v4l2_subdev *src_sd; + + struct media_entity *sink; + + struct v4l2_fwnode_endpoint upstream_ep; + + struct v4l2_mbus_framefmt format_mbus[IMX7_CSI_PADS_NUM]; + const struct imx_media_pixfmt *cc[IMX7_CSI_PADS_NUM]; + struct v4l2_fract frame_interval[IMX7_CSI_PADS_NUM]; + + struct v4l2_ctrl_handler ctrl_hdlr; + + void __iomem *regbase; + int irq; + + struct clk *clk_disp_axi; + struct clk *clk_disp_dcic; + struct clk *clk_csi_mclk; + + /* active vb2 buffers to send to video dev sink */ + struct imx_media_buffer *active_vb2_buf[2]; + struct imx_media_dma_buf underrun_buf; + + int buf_num; + u32 frame_sequence; + + bool last_eof; + bool is_init; + bool is_streaming; + bool is_csi2; + + struct completion last_eof_completion; +}; ++#define imx7_csi_reg_read(_csi, _offset) __raw_readl(_csi->regbase + _offset)+#define imx7_csi_reg_write(_csi, _val, _offset) \ + __raw_writel(_val, _csi->regbase + _offset) + +static void imx7_csi_clk_enable(struct imx7_csi *csi) +{ + clk_prepare_enable(csi->clk_disp_axi); + clk_prepare_enable(csi->clk_disp_dcic); + clk_prepare_enable(csi->clk_csi_mclk);Could you use clk_bulk?prepare_enable()? Same below in ...clk_disable().
Good point, will be in v9. Same below.
+} + +static void imx7_csi_clk_disable(struct imx7_csi *csi) +{ + clk_disable_unprepare(csi->clk_csi_mclk); + clk_disable_unprepare(csi->clk_disp_dcic); + clk_disable_unprepare(csi->clk_disp_axi); +} + +static void imx7_csi_hw_reset(struct imx7_csi *csi) +{ + imx7_csi_reg_write(csi,+ imx7_csi_reg_read(csi, CSI_CSICR3) | BIT_FRMCNT_RST,+ CSI_CSICR3); + + imx7_csi_reg_write(csi, CSICR1_RESET_VAL, CSI_CSICR1); + imx7_csi_reg_write(csi, CSICR2_RESET_VAL, CSI_CSICR2); + imx7_csi_reg_write(csi, CSICR3_RESET_VAL, CSI_CSICR3); +} + +static unsigned long imx7_csi_irq_clear(struct imx7_csi *csi) +{ + unsigned long isr; + + isr = imx7_csi_reg_read(csi, CSI_CSISR); + imx7_csi_reg_write(csi, isr, CSI_CSISR); + + return isr; +} + +static void imx7_csi_init_interface(struct imx7_csi *csi) +{ + unsigned int val = 0; + unsigned int imag_para; ++ val = BIT_SOF_POL | BIT_REDGE | BIT_GCLK_MODE | BIT_HSYNC_POL |+ BIT_FCC | 1 << SHIFT_MCLKDIV | BIT_MCLKEN; + imx7_csi_reg_write(csi, val, CSI_CSICR1); + + imag_para = (800 << 16) | 600; + imx7_csi_reg_write(csi, imag_para, CSI_CSIIMAG_PARA); + + val = BIT_DMA_REFLASH_RFF; + imx7_csi_reg_write(csi, val, CSI_CSICR3); +} + +static void imx7_csi_hw_enable_irq(struct imx7_csi *csi) +{ + unsigned long cr1 = imx7_csi_reg_read(csi, CSI_CSICR1); + + cr1 |= BIT_SOF_INTEN; + cr1 |= BIT_RFF_OR_INT; + + /* still capture needs DMA interrupt */ + cr1 |= BIT_FB1_DMA_DONE_INTEN; + cr1 |= BIT_FB2_DMA_DONE_INTEN; + + cr1 |= BIT_EOF_INT_EN; + + imx7_csi_reg_write(csi, cr1, CSI_CSICR1); +} + +static void imx7_csi_hw_disable_irq(struct imx7_csi *csi) +{ + unsigned long cr1 = imx7_csi_reg_read(csi, CSI_CSICR1); + + cr1 &= ~BIT_SOF_INTEN; + cr1 &= ~BIT_RFF_OR_INT; + cr1 &= ~BIT_FB1_DMA_DONE_INTEN; + cr1 &= ~BIT_FB2_DMA_DONE_INTEN; + cr1 &= ~BIT_EOF_INT_EN; + + imx7_csi_reg_write(csi, cr1, CSI_CSICR1); +} + +static void imx7_csi_hw_enable(struct imx7_csi *csi) +{ + unsigned long cr = imx7_csi_reg_read(csi, CSI_CSICR18); + + cr |= BIT_CSI_HW_ENABLE; + + imx7_csi_reg_write(csi, cr, CSI_CSICR18); +} + +static void imx7_csi_hw_disable(struct imx7_csi *csi) +{ + unsigned long cr = imx7_csi_reg_read(csi, CSI_CSICR18); + + cr &= ~BIT_CSI_HW_ENABLE; + + imx7_csi_reg_write(csi, cr, CSI_CSICR18); +} + +static void imx7_csi_dma_reflash(struct imx7_csi *csi) +{ + unsigned long cr3 = imx7_csi_reg_read(csi, CSI_CSICR18); + + cr3 = imx7_csi_reg_read(csi, CSI_CSICR3); + cr3 |= BIT_DMA_REFLASH_RFF; + imx7_csi_reg_write(csi, cr3, CSI_CSICR3); +} + +static void imx7_csi_rx_fifo_clear(struct imx7_csi *csi) +{ + unsigned long cr1; + + cr1 = imx7_csi_reg_read(csi, CSI_CSICR1); + imx7_csi_reg_write(csi, cr1 & ~BIT_FCC, CSI_CSICR1); + cr1 = imx7_csi_reg_read(csi, CSI_CSICR1); + imx7_csi_reg_write(csi, cr1 | BIT_CLR_RXFIFO, CSI_CSICR1); + + cr1 = imx7_csi_reg_read(csi, CSI_CSICR1); + imx7_csi_reg_write(csi, cr1 | BIT_FCC, CSI_CSICR1); +} ++static void imx7_csi_buf_stride_set(struct imx7_csi *csi, u32 stride)+{ + imx7_csi_reg_write(csi, stride, CSI_CSIFBUF_PARA); +} ++static void imx7_csi_deinterlace_enable(struct imx7_csi *csi, bool enable)+{ + unsigned long cr18 = imx7_csi_reg_read(csi, CSI_CSICR18); + + if (enable) + cr18 |= BIT_DEINTERLACE_EN; + else + cr18 &= ~BIT_DEINTERLACE_EN; + + imx7_csi_reg_write(csi, cr18, CSI_CSICR18); +} + +static void imx7_csi_dmareq_rff_enable(struct imx7_csi *csi) +{ + unsigned long cr3 = imx7_csi_reg_read(csi, CSI_CSICR3); + unsigned long cr2 = imx7_csi_reg_read(csi, CSI_CSICR2); + + /* Burst Type of DMA Transfer from RxFIFO. INCR16 */ + cr2 |= 0xC0000000; + + cr3 |= BIT_DMA_REQ_EN_RFF; + cr3 |= BIT_HRESP_ERR_EN; + cr3 &= ~BIT_RXFF_LEVEL; + cr3 |= 0x2 << 4; + + imx7_csi_reg_write(csi, cr3, CSI_CSICR3); + imx7_csi_reg_write(csi, cr2, CSI_CSICR2); +} + +static void imx7_csi_dmareq_rff_disable(struct imx7_csi *csi) +{ + unsigned long cr3 = imx7_csi_reg_read(csi, CSI_CSICR3); + + cr3 &= ~BIT_DMA_REQ_EN_RFF; + cr3 &= ~BIT_HRESP_ERR_EN; + imx7_csi_reg_write(csi, cr3, CSI_CSICR3); +} ++static void imx7_csi_set_imagpara(struct imx7_csi *csi, int width, int height)+{ + int imag_para; + int rx_count; + + rx_count = (width * height) >> 2; + imx7_csi_reg_write(csi, rx_count, CSI_CSIRXCNT); + + imag_para = (width << 16) | height; + imx7_csi_reg_write(csi, imag_para, CSI_CSIIMAG_PARA); + + /* reflash the embedded DMA controller */ + imx7_csi_dma_reflash(csi); +} + +static void imx7_csi_sw_reset(struct imx7_csi *csi) +{ + imx7_csi_hw_disable(csi); + + imx7_csi_rx_fifo_clear(csi); + + imx7_csi_dma_reflash(csi); + + usleep_range(2000, 3000); + + imx7_csi_irq_clear(csi); + + imx7_csi_hw_enable(csi); +} + +static void imx7_csi_error_recovery(struct imx7_csi *csi) +{ + imx7_csi_hw_disable(csi); + + imx7_csi_rx_fifo_clear(csi); + + imx7_csi_dma_reflash(csi); + + imx7_csi_hw_enable(csi); +} + +static void imx7_csi_init(struct imx7_csi *csi) +{ + if (csi->is_init) + return; + + imx7_csi_clk_enable(csi); + imx7_csi_hw_reset(csi); + imx7_csi_init_interface(csi); + imx7_csi_dmareq_rff_enable(csi); + + csi->is_init = true; +} + +static void imx7_csi_deinit(struct imx7_csi *csi) +{ + if (!csi->is_init) + return; + + imx7_csi_hw_reset(csi); + imx7_csi_init_interface(csi); + imx7_csi_dmareq_rff_disable(csi); + imx7_csi_clk_disable(csi); + + csi->is_init = false; +} ++static int imx7_csi_get_upstream_endpoint(struct imx7_csi *csi, + struct v4l2_fwnode_endpoint *ep,+ bool skip_mux) +{ + struct device_node *endpoint, *port; + struct media_entity *src; + struct v4l2_subdev *sd; + struct media_pad *pad; + + if (!csi->src_sd) + return -EPIPE; + + src = &csi->src_sd->entity; + +skip_video_mux: + /* get source pad of entity directly upstream from src */ + pad = imx_media_find_upstream_pad(csi->md, src, 0); + if (IS_ERR(pad)) + return PTR_ERR(pad); + + sd = media_entity_to_v4l2_subdev(pad->entity); + + /* To get bus type we may need to skip video mux */ + if (skip_mux && src->function == MEDIA_ENT_F_VID_MUX) { + src = &sd->entity; + goto skip_video_mux; + } + + /* + * NOTE: this assumes an OF-graph port id is the same as a + * media pad index. + */+ port = of_graph_get_port_by_id(sd->dev->of_node, pad->index);+ if (!port) + return -ENODEV; + + endpoint = of_get_next_child(port, NULL); + of_node_put(port); + if (!endpoint) + return -ENODEV; ++ v4l2_fwnode_endpoint_parse(of_fwnode_handle(endpoint), ep);I'd suggest to set the bus type before calling this. And do zero the rest of the struct as well (or put defaults in); otherwise you'll get unexpectedresults back.
Yeah, struct will be initialize in the caller.
Just wondering... this seems complicated. What's the exact problem thisfunction is intended to address?
To get if the upstream ep bus type is csi2 and but we may need jump over
immediate ep if it is a mux to get to the "real" source.
+ of_node_put(endpoint); + + return 0; +} + +static int imx7_csi_link_setup(struct media_entity *entity, + const struct media_pad *local,+ const struct media_pad *remote, u32 flags)+{+ struct v4l2_subdev *sd = media_entity_to_v4l2_subdev(entity);+ struct imx7_csi *csi = v4l2_get_subdevdata(sd); + struct v4l2_subdev *remote_sd; + int ret = 0; ++ dev_dbg(csi->dev, "link setup %s -> %s\n", remote->entity->name,+ local->entity->name); + + mutex_lock(&csi->lock); + + if (local->flags & MEDIA_PAD_FL_SINK) {+ if (!is_media_entity_v4l2_subdev(remote->entity)) {+ ret = -EINVAL; + goto unlock; + } ++ remote_sd = media_entity_to_v4l2_subdev(remote->entity);+ + if (flags & MEDIA_LNK_FL_ENABLED) { + if (csi->src_sd) { + ret = -EBUSY; + goto unlock; + } + csi->src_sd = remote_sd; + } else { + csi->src_sd = NULL; + } + + goto init; + } + + /* source pad */ + if (flags & MEDIA_LNK_FL_ENABLED) { + if (csi->sink) { + ret = -EBUSY; + goto unlock; + } + csi->sink = remote->entity; + } else { + v4l2_ctrl_handler_free(&csi->ctrl_hdlr); + v4l2_ctrl_handler_init(&csi->ctrl_hdlr, 0); + csi->sink = NULL; + } + +init: + if (csi->sink || csi->src_sd) + imx7_csi_init(csi); + else + imx7_csi_deinit(csi); + +unlock: + mutex_unlock(&csi->lock); + + return ret; +} + +static int imx7_csi_pad_link_validate(struct v4l2_subdev *sd, + struct media_link *link,+ struct v4l2_subdev_format *source_fmt, + struct v4l2_subdev_format *sink_fmt)+{ + struct imx7_csi *csi = v4l2_get_subdevdata(sd); + struct v4l2_fwnode_endpoint upstream_ep; + int ret; ++ ret = v4l2_subdev_link_validate_default(sd, link, source_fmt, sink_fmt);+ if (ret) + return ret; ++ ret = imx7_csi_get_upstream_endpoint(csi, &upstream_ep, true);+ if (ret) {+ v4l2_err(&csi->sd, "failed to find upstream endpoint\n");+ return ret; + } + + mutex_lock(&csi->lock); + + csi->upstream_ep = upstream_ep;+ csi->is_csi2 = (upstream_ep.bus_type == V4L2_MBUS_CSI2_DPHY);+ + mutex_unlock(&csi->lock); + + return 0; +} ++static void imx7_csi_update_buf(struct imx7_csi *csi, dma_addr_t phys,+ int buf_num) +{ + if (buf_num == 1) + imx7_csi_reg_write(csi, phys, CSI_CSIDMASA_FB2); + else + imx7_csi_reg_write(csi, phys, CSI_CSIDMASA_FB1); +} + +static void imx7_csi_setup_vb2_buf(struct imx7_csi *csi) +{ + struct imx_media_video_dev *vdev = csi->vdev; + struct imx_media_buffer *buf; + struct vb2_buffer *vb2_buf; + dma_addr_t phys[2]; + int i; + + for (i = 0; i < 2; i++) { + buf = imx_media_capture_device_next_buf(vdev); + if (buf) { + csi->active_vb2_buf[i] = buf; + vb2_buf = &buf->vbuf.vb2_buf;+ phys[i] = vb2_dma_contig_plane_dma_addr(vb2_buf, 0);+ } else { + csi->active_vb2_buf[i] = NULL; + phys[i] = csi->underrun_buf.phys; + } + + imx7_csi_update_buf(csi, phys[i], i); + } +} + +static void imx7_csi_dma_unsetup_vb2_buf(struct imx7_csi *csi,+ enum vb2_buffer_state return_status)+{ + struct imx_media_buffer *buf; + int i; ++ /* return any remaining active frames with return_status */+ for (i = 0; i < 2; i++) { + buf = csi->active_vb2_buf[i]; + if (buf) {+ struct vb2_buffer *vb = &buf->vbuf.vb2_buf;+ + vb->timestamp = ktime_get_ns(); + vb2_buffer_done(vb, return_status); + } + } +} + +static void imx7_csi_vb2_buf_done(struct imx7_csi *csi) +{ + struct imx_media_video_dev *vdev = csi->vdev; + struct imx_media_buffer *done, *next; + struct vb2_buffer *vb; + dma_addr_t phys; + + done = csi->active_vb2_buf[csi->buf_num]; + if (done) { + done->vbuf.field = vdev->fmt.fmt.pix.field; + done->vbuf.sequence = csi->frame_sequence; + vb = &done->vbuf.vb2_buf; + vb->timestamp = ktime_get_ns(); + vb2_buffer_done(vb, VB2_BUF_STATE_DONE); + } + csi->frame_sequence++; + + /* get next queued buffer */ + next = imx_media_capture_device_next_buf(vdev); + if (next) {+ phys = vb2_dma_contig_plane_dma_addr(&next->vbuf.vb2_buf, 0);+ csi->active_vb2_buf[csi->buf_num] = next; + } else { + phys = csi->underrun_buf.phys; + csi->active_vb2_buf[csi->buf_num] = NULL; + } + + imx7_csi_update_buf(csi, phys, csi->buf_num); +} + +static irqreturn_t imx7_csi_irq_handler(int irq, void *data) +{ + struct imx7_csi *csi = data; + unsigned long status; + + spin_lock(&csi->irqlock); + + status = imx7_csi_irq_clear(csi); + + if (status & BIT_RFF_OR_INT) { + dev_warn(csi->dev, "Rx fifo overflow\n"); + imx7_csi_error_recovery(csi); + } + + if (status & BIT_HRESP_ERR_INT) { + dev_warn(csi->dev, "Hresponse error detected\n"); + imx7_csi_error_recovery(csi); + } + + if (status & BIT_ADDR_CH_ERR_INT) { + imx7_csi_hw_disable(csi); + + imx7_csi_dma_reflash(csi); + + imx7_csi_hw_enable(csi); + } + + if ((status & BIT_DMA_TSF_DONE_FB1) && + (status & BIT_DMA_TSF_DONE_FB2)) { + /* + * For both FB1 and FB2 interrupter bits set case, + * CSI DMA is work in one of FB1 and FB2 buffer, + * but software can not know the state. + * Skip it to avoid base address updated+ * when csi work in field0 and field1 will write to+ * new base address. + */ + } else if (status & BIT_DMA_TSF_DONE_FB1) { + csi->buf_num = 0; + } else if (status & BIT_DMA_TSF_DONE_FB2) { + csi->buf_num = 1; + } + + if ((status & BIT_DMA_TSF_DONE_FB1) || + (status & BIT_DMA_TSF_DONE_FB2)) { + imx7_csi_vb2_buf_done(csi); + + if (csi->last_eof) { + complete(&csi->last_eof_completion); + csi->last_eof = false; + } + } + + + spin_unlock(&csi->irqlock); + + return IRQ_HANDLED; +} + +static int imx7_csi_dma_start(struct imx7_csi *csi) +{ + struct imx_media_video_dev *vdev = csi->vdev; + struct v4l2_pix_format *out_pix = &vdev->fmt.fmt.pix; + int ret; + + ret = imx_media_alloc_dma_buf(csi->md, &csi->underrun_buf, + out_pix->sizeimage); + if (ret < 0) {+ v4l2_warn(&csi->sd, "consider increasing the CMA area\n");+ return ret; + } + + csi->frame_sequence = 0; + csi->last_eof = false; + init_completion(&csi->last_eof_completion); + + imx7_csi_setup_vb2_buf(csi); + + return 0; +} + +static void imx7_csi_dma_stop(struct imx7_csi *csi) +{ + unsigned long flags; + int ret; ++ /* mark next EOF interrupt as the last before stream off */+ spin_lock_irqsave(&csi->irqlock, flags); + csi->last_eof = true; + spin_unlock_irqrestore(&csi->irqlock, flags); + + /* + * and then wait for interrupt handler to mark completion. + */+ ret = wait_for_completion_timeout(&csi->last_eof_completion, + msecs_to_jiffies(IMX_MEDIA_EOF_TIMEOUT));+ if (ret == 0) + v4l2_warn(&csi->sd, "wait last EOF timeout\n"); + + imx7_csi_hw_disable_irq(csi); + + imx7_csi_dma_unsetup_vb2_buf(csi, VB2_BUF_STATE_ERROR); + + imx_media_free_dma_buf(csi->md, &csi->underrun_buf); +} + +static int imx7_csi_configure(struct imx7_csi *csi) +{ + struct imx_media_video_dev *vdev = csi->vdev; + struct v4l2_pix_format *out_pix = &vdev->fmt.fmt.pix; + __u32 in_code = csi->format_mbus[IMX7_CSI_PAD_SINK].code; + u32 cr1, cr18; + + if (out_pix->field == V4L2_FIELD_INTERLACED) { + imx7_csi_deinterlace_enable(csi, true); + imx7_csi_buf_stride_set(csi, out_pix->width); + } else { + imx7_csi_deinterlace_enable(csi, false); + imx7_csi_buf_stride_set(csi, 0); + } ++ imx7_csi_set_imagpara(csi, out_pix->width, out_pix->height);+ + if (!csi->is_csi2) + return 0; + + cr1 = imx7_csi_reg_read(csi, CSI_CSICR1); + cr1 &= ~BIT_GCLK_MODE; + + cr18 = imx7_csi_reg_read(csi, CSI_CSICR18); + cr18 &= BIT_MIPI_DATA_FORMAT_MASK; + cr18 |= BIT_DATA_FROM_MIPI; + + switch (out_pix->pixelformat) { + case V4L2_PIX_FMT_UYVY: + case V4L2_PIX_FMT_YUYV: + cr18 |= BIT_MIPI_DATA_FORMAT_YUV422_8B; + break; + case V4L2_PIX_FMT_SBGGR8: + cr18 |= BIT_MIPI_DATA_FORMAT_RAW8; + break; + case V4L2_PIX_FMT_SBGGR16: + if (in_code == MEDIA_BUS_FMT_SBGGR10_1X10) + cr18 |= BIT_MIPI_DATA_FORMAT_RAW10; + else if (in_code == MEDIA_BUS_FMT_SBGGR12_1X12) + cr18 |= BIT_MIPI_DATA_FORMAT_RAW12; + else if (in_code == MEDIA_BUS_FMT_SBGGR14_1X14) + cr18 |= BIT_MIPI_DATA_FORMAT_RAW14; + cr1 |= BIT_PIXEL_BIT; + break; + default: + return -EINVAL; + } + + imx7_csi_reg_write(csi, cr1, CSI_CSICR1); + imx7_csi_reg_write(csi, cr18, CSI_CSICR18); + + return 0; +} + +static int imx7_csi_enable(struct imx7_csi *csi) +{ + imx7_csi_sw_reset(csi); + + if (csi->is_csi2) { + imx7_csi_dmareq_rff_enable(csi); + imx7_csi_hw_enable_irq(csi); + imx7_csi_hw_enable(csi); + return 0; + } + + return 0; +} + +static void imx7_csi_disable(struct imx7_csi *csi) +{ + imx7_csi_dmareq_rff_disable(csi); + + imx7_csi_hw_disable_irq(csi); + + imx7_csi_buf_stride_set(csi, 0); + + imx7_csi_hw_disable(csi); +} + +static int imx7_csi_streaming_start(struct imx7_csi *csi) +{ + int ret; + + ret = imx7_csi_dma_start(csi); + if (ret < 0) + return ret; + + ret = imx7_csi_configure(csi); + if (ret < 0) + goto dma_stop; + + imx7_csi_enable(csi); + + return 0; + +dma_stop: + imx7_csi_dma_stop(csi); + + return ret; +} + +static int imx7_csi_streaming_stop(struct imx7_csi *csi) +{ + imx7_csi_dma_stop(csi); + + imx7_csi_disable(csi); + + return 0; +} ++static int imx7_csi_s_stream(struct v4l2_subdev *sd, int enable)+{ + struct imx7_csi *csi = v4l2_get_subdevdata(sd); + int ret = 0; + + mutex_lock(&csi->lock); + + if (!csi->src_sd || !csi->sink) { + ret = -EPIPE; + goto out_unlock; + } + + if (csi->is_streaming == !!enable) + goto out_unlock; + + if (enable) {+ ret = v4l2_subdev_call(csi->src_sd, video, s_stream, 1);+ if (ret < 0) + goto out_unlock; + + ret = imx7_csi_streaming_start(csi); + if (ret < 0) {+ v4l2_subdev_call(csi->src_sd, video, s_stream, 0);+ goto out_unlock; + } + } else { + imx7_csi_streaming_stop(csi); + + v4l2_subdev_call(csi->src_sd, video, s_stream, 0); + } + + csi->is_streaming = !!enable; + +out_unlock: + mutex_unlock(&csi->lock); + + return ret; +} ++static struct v4l2_mbus_framefmt *imx7_csi_get_format(struct imx7_csi *csi, + struct v4l2_subdev_pad_config *cfg,+ unsigned int pad,+ enum v4l2_subdev_format_whence which)+{ + if (which == V4L2_SUBDEV_FORMAT_TRY)+ return v4l2_subdev_get_try_format(&csi->sd, cfg, pad);+ + return &csi->format_mbus[pad]; +} + +static int imx7_csi_enum_mbus_code(struct v4l2_subdev *sd,+ struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_mbus_code_enum *code)+{ + struct imx7_csi *csi = v4l2_get_subdevdata(sd); + const struct imx_media_pixfmt *in_cc; + struct v4l2_mbus_framefmt *in_fmt; + int ret = 0; + + mutex_lock(&csi->lock); ++ in_fmt = imx7_csi_get_format(csi, cfg, IMX7_CSI_PAD_SINK, code->which);++ in_cc = imx_media_find_mbus_format(in_fmt->code, CS_SEL_ANY, true);+ + switch (code->pad) { + case IMX7_CSI_PAD_SINK:+ ret = imx_media_enum_mbus_format(&code->code, code->index, + CS_SEL_ANY, true);+ break; + case IMX7_CSI_PAD_SRC: + if (code->index != 0) { + ret = -EINVAL; + goto out_unlock; + } + + code->code = in_fmt->code; + break; + default: + ret = -EINVAL; + } + +out_unlock: + mutex_unlock(&csi->lock); + + return ret; +} + +static int imx7_csi_get_fmt(struct v4l2_subdev *sd, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_format *sdformat) +{ + struct imx7_csi *csi = v4l2_get_subdevdata(sd); + struct v4l2_mbus_framefmt *fmt; + int ret = 0; + + if (sdformat->pad >= IMX7_CSI_PADS_NUM) + return -EINVAL;The framework validates the pad indices already. You can drop this one.
V9.
+ + mutex_lock(&csi->lock); ++ fmt = imx7_csi_get_format(csi, cfg, sdformat->pad, sdformat->which);+ if (!fmt) { + ret = -EINVAL; + goto out_unlock; + } + + sdformat->format = *fmt; + +out_unlock: + mutex_unlock(&csi->lock); + + return ret; +} + +static void imx7_csi_try_fmt(struct imx7_csi *csi, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_format *sdformat, + const struct imx_media_pixfmt **cc) +{ + const struct imx_media_pixfmt *in_cc; + struct v4l2_mbus_framefmt *in_fmt; + u32 code; + + in_fmt = imx7_csi_get_format(csi, cfg, IMX7_CSI_PAD_SINK, + sdformat->which); + if (!in_fmt) + return; + + switch (sdformat->pad) { + case IMX7_CSI_PAD_SRC:+ in_cc = imx_media_find_mbus_format(in_fmt->code, CS_SEL_ANY,+ true); + + sdformat->format.width = in_fmt->width; + sdformat->format.height = in_fmt->height; + sdformat->format.code = in_fmt->code; + *cc = in_cc; + + sdformat->format.colorspace = in_fmt->colorspace; + sdformat->format.xfer_func = in_fmt->xfer_func;+ sdformat->format.quantization = in_fmt->quantization;+ sdformat->format.ycbcr_enc = in_fmt->ycbcr_enc; + break; + case IMX7_CSI_PAD_SINK:+ *cc = imx_media_find_mbus_format(sdformat->format.code, + CS_SEL_ANY, true);+ if (!*cc) {+ imx_media_enum_mbus_format(&code, 0, CS_SEL_ANY, false); + *cc = imx_media_find_mbus_format(code, CS_SEL_ANY,+ false); + sdformat->format.code = (*cc)->codes[0]; + } ++ imx_media_fill_default_mbus_fields(&sdformat->format, in_fmt,+ false); + break; + default: + break; + } +} + +static int imx7_csi_set_fmt(struct v4l2_subdev *sd, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_format *sdformat) +{ + struct imx7_csi *csi = v4l2_get_subdevdata(sd); + struct imx_media_video_dev *vdev = csi->vdev; + const struct imx_media_pixfmt *outcc; + struct v4l2_mbus_framefmt *outfmt; + struct v4l2_pix_format vdev_fmt; + const struct imx_media_pixfmt *cc; + struct v4l2_mbus_framefmt *fmt; + struct v4l2_subdev_format format; + int ret = 0; + + if (sdformat->pad >= IMX7_CSI_PADS_NUM) + return -EINVAL; + + mutex_lock(&csi->lock); + + if (csi->is_streaming) { + ret = -EBUSY; + goto out_unlock; + } + + imx7_csi_try_fmt(csi, cfg, sdformat, &cc); ++ fmt = imx7_csi_get_format(csi, cfg, sdformat->pad, sdformat->which);+ if (!fmt) { + ret = -EINVAL; + goto out_unlock; + } + + *fmt = sdformat->format; + + if (sdformat->pad == IMX7_CSI_PAD_SINK) { + /* propagate format to source pads */ + format.pad = IMX7_CSI_PAD_SRC; + format.which = sdformat->which; + format.format = sdformat->format; + imx7_csi_try_fmt(csi, cfg, &format, &outcc); ++ outfmt = imx7_csi_get_format(csi, cfg, IMX7_CSI_PAD_SRC,+ sdformat->which); + *outfmt = format.format; + + if (sdformat->which == V4L2_SUBDEV_FORMAT_ACTIVE) + csi->cc[IMX7_CSI_PAD_SRC] = outcc; + } + + if (sdformat->which == V4L2_SUBDEV_FORMAT_TRY) + goto out_unlock; + + csi->cc[sdformat->pad] = cc; + + /* propagate output pad format to capture device */ + imx_media_mbus_fmt_to_pix_fmt(&vdev_fmt,+ &csi->format_mbus[IMX7_CSI_PAD_SRC],+ csi->cc[IMX7_CSI_PAD_SRC]);The user is expected to configure the format on the video device; the driverneeds to validate that when starting the stream.
Will take a look at this.
+ mutex_unlock(&csi->lock); + imx_media_capture_device_set_format(vdev, &vdev_fmt); + + return 0; + +out_unlock: + mutex_unlock(&csi->lock); + + return ret; +} + +static int imx7_csi_registered(struct v4l2_subdev *sd) +{ + struct imx7_csi *csi = v4l2_get_subdevdata(sd); + int ret; + int i; + + csi->md = dev_get_drvdata(sd->v4l2_dev->dev); + + for (i = 0; i < IMX7_CSI_PADS_NUM; i++) { + csi->pad[i].flags = (i == IMX7_CSI_PAD_SINK) ? + MEDIA_PAD_FL_SINK : MEDIA_PAD_FL_SOURCE; + + /* set a default mbus format */+ ret = imx_media_init_mbus_fmt(&csi->format_mbus[i], + 800, 600, 0, V4L2_FIELD_NONE,+ &csi->cc[i]); + if (ret < 0) + return ret; + + /* init default frame interval */ + csi->frame_interval[i].numerator = 1; + csi->frame_interval[i].denominator = 30; + } ++ ret = media_entity_pads_init(&sd->entity, IMX7_CSI_PADS_NUM, csi->pad);+ if (ret < 0) + return ret; + + ret = imx_media_capture_device_register(csi->vdev); + if (ret < 0) + return ret; + + ret = imx_media_add_video_device(csi->md, csi->vdev); + if (ret < 0) { + imx_media_capture_device_unregister(csi->vdev); + return ret; + } + + return 0; +} + +static void imx7_csi_unregistered(struct v4l2_subdev *sd) +{ + struct imx7_csi *csi = v4l2_get_subdevdata(sd); + + imx_media_capture_device_unregister(csi->vdev); +} + +static int imx7_csi_init_cfg(struct v4l2_subdev *sd, + struct v4l2_subdev_pad_config *cfg) +{ + struct imx7_csi *csi = v4l2_get_subdevdata(sd); + struct v4l2_mbus_framefmt *mf; + int ret; + int i; + + for (i = 0; i < IMX7_CSI_PADS_NUM; i++) { + mf = v4l2_subdev_get_try_format(sd, cfg, i); ++ ret = imx_media_init_mbus_fmt(mf, 800, 600, 0, V4L2_FIELD_NONE,+ &csi->cc[i]); + if (ret < 0) + return ret; + } + + return 0; +} ++static const struct media_entity_operations imx7_csi_entity_ops = {+ .link_setup = imx7_csi_link_setup, + .link_validate = v4l2_subdev_link_validate, +}; ++static const struct v4l2_subdev_video_ops imx7_csi_video_ops = {+ .s_stream = imx7_csi_s_stream, +}; + +static const struct v4l2_subdev_pad_ops imx7_csi_pad_ops = { + .init_cfg = imx7_csi_init_cfg, + .enum_mbus_code = imx7_csi_enum_mbus_code, + .get_fmt = imx7_csi_get_fmt, + .set_fmt = imx7_csi_set_fmt, + .link_validate = imx7_csi_pad_link_validate, +}; + +static const struct v4l2_subdev_ops imx7_csi_subdev_ops = { + .video = &imx7_csi_video_ops, + .pad = &imx7_csi_pad_ops, +}; ++static const struct v4l2_subdev_internal_ops imx7_csi_internal_ops = {+ .registered = imx7_csi_registered, + .unregistered = imx7_csi_unregistered, +}; + +static int imx7_csi_parse_endpoint(struct device *dev,+ struct v4l2_fwnode_endpoint *vep,+ struct v4l2_async_subdev *asd) +{+ return fwnode_device_is_available(asd->match.fwnode) ? 0 : -EINVAL;+} + +static int imx7_csi_parse_dt(struct imx7_csi *csi) +{ + struct device *dev = csi->dev; + + csi->clk_disp_axi = devm_clk_get(dev, "axi"); + if (IS_ERR(csi->clk_disp_axi)) { + dev_err(dev, "Could not get csi axi clock\n"); + return -ENODEV; + } + + csi->clk_disp_dcic = devm_clk_get(dev, "dcic"); + if (IS_ERR(csi->clk_disp_dcic)) { + dev_err(dev, "Could not get disp dcic clock\n"); + return -ENODEV; + } + + csi->clk_csi_mclk = devm_clk_get(dev, "mclk"); + if (IS_ERR(csi->clk_csi_mclk)) { + dev_err(dev, "Could not get csi mclk clock\n"); + return -ENODEV; + }Could you use devm_clk_bulk_get()?
V9
+ + return 0; +} + +static int imx7_csi_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *node = dev->of_node; + struct imx7_csi *csi; + struct resource *res; + int ret; + + csi = devm_kzalloc(&pdev->dev, sizeof(*csi), GFP_KERNEL); + if (!csi) + return -ENOMEM; + + platform_set_drvdata(pdev, &csi->sd); + csi->dev = dev; + + ret = imx7_csi_parse_dt(csi); + if (ret < 0) + return -ENODEV; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + csi->irq = platform_get_irq(pdev, 0); + if (!res || csi->irq < 0) { + dev_err(dev, "Missing platform resources data\n"); + return -ENODEV; + } + + csi->regbase = devm_ioremap_resource(dev, res); + if (IS_ERR(csi->regbase)) { + dev_err(dev, "Failed platform resources map\n"); + return -ENODEV; + } + + spin_lock_init(&csi->irqlock); + mutex_init(&csi->lock); + + /* install interrupt handler */+ ret = devm_request_irq(dev, csi->irq, imx7_csi_irq_handler, 0, "csi",+ (void *)csi); + if (ret < 0) { + dev_err(dev, "Request CSI IRQ failed.\n"); + return -ENODEV;mutex_destroy(); better to add a label below.
V9.
+ } + + /* add media device */ + csi->imxmd = imx_media_dev_init(dev); + if (IS_ERR(csi->imxmd)) + return PTR_ERR(csi->imxmd); + + ret = imx_media_of_add_csi(csi->imxmd, node); + if (ret < 0) + goto media_cleanup; + + ret = imx_media_dev_notifier_register(csi->imxmd); + if (ret < 0) + goto media_cleanup; + + v4l2_subdev_init(&csi->sd, &imx7_csi_subdev_ops); + v4l2_set_subdevdata(&csi->sd, csi); + csi->sd.internal_ops = &imx7_csi_internal_ops; + csi->sd.entity.ops = &imx7_csi_entity_ops; + csi->sd.entity.function = MEDIA_ENT_F_VID_IF_BRIDGE; + csi->sd.dev = &pdev->dev; + csi->sd.owner = THIS_MODULE; + csi->sd.flags = V4L2_SUBDEV_FL_HAS_DEVNODE; + csi->sd.grp_id = IMX_MEDIA_GRP_ID_CSI; + snprintf(csi->sd.name, sizeof(csi->sd.name), "csi"); ++ csi->vdev = imx_media_capture_device_init(&csi->sd, IMX7_CSI_PAD_SRC);+ if (IS_ERR(csi->vdev)) + return PTR_ERR(csi->vdev); + + v4l2_ctrl_handler_init(&csi->ctrl_hdlr, 0); + csi->sd.ctrl_handler = &csi->ctrl_hdlr; + + ret = v4l2_async_register_fwnode_subdev(&csi->sd,+ sizeof(struct v4l2_async_subdev), + NULL, 0, imx7_csi_parse_endpoint);+ if (ret) + goto free; + + return 0; + +free: + v4l2_ctrl_handler_free(&csi->ctrl_hdlr); + mutex_destroy(&csi->lock); + imx_media_capture_device_remove(csi->vdev); + +media_cleanup: + imx_media_dev_cleanup(csi->imxmd); + + return ret; +} + +static int imx7_csi_remove(struct platform_device *pdev) +{ + struct v4l2_subdev *sd = platform_get_drvdata(pdev); + struct imx7_csi *csi = v4l2_get_subdevdata(sd); + + v4l2_ctrl_handler_free(&csi->ctrl_hdlr); + mutex_destroy(&csi->lock);Please unregister the devices before the two above lines.
Right. --- Cheers, Rui _______________________________________________ devel mailing list devel@xxxxxxxxxxxxxxxxxxxxxx http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
