Re: [PATCH v2 5/5] Staging: iio: adt7316: Use device tree data to assign irq_type

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, 2018-11-20 at 22:30 +0530, Shreeya Patel wrote:
> ADT7316 driver no more uses platform data and hence use device tree
> data instead of platform data for assigning irq_type field.
> Switch case figures out the type of irq and if it's the default case
> then assign the default value to the irq_type i.e.
> irq_type = IRQF_TRIGGER_LOW
> 

1 comment inline

> Signed-off-by: Shreeya Patel <shreeya.patel23498@xxxxxxxxx>
> ---
>  drivers/staging/iio/addac/adt7316.c | 21 +++++++++++++++++----
>  1 file changed, 17 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/staging/iio/addac/adt7316.c
> b/drivers/staging/iio/addac/adt7316.c
> index 9c72538baf9e..c647875a64f5 100644
> --- a/drivers/staging/iio/addac/adt7316.c
> +++ b/drivers/staging/iio/addac/adt7316.c
> @@ -2101,8 +2101,7 @@ int adt7316_probe(struct device *dev, struct
> adt7316_bus *bus,
>  {
>  	struct adt7316_chip_info *chip;
>  	struct iio_dev *indio_dev;
> -	unsigned short *adt7316_platform_data = dev->platform_data;
> -	int irq_type = IRQF_TRIGGER_LOW;
> +	int irq_type;
>  	int ret = 0;
>  
>  	indio_dev = devm_iio_device_alloc(dev, sizeof(*chip));
> @@ -2146,8 +2145,22 @@ int adt7316_probe(struct device *dev, struct
> adt7316_bus *bus,
>  	indio_dev->modes = INDIO_DIRECT_MODE;
>  
>  	if (chip->bus.irq > 0) {
> -		if (adt7316_platform_data[0])
> -			irq_type = adt7316_platform_data[0];
> +		irq_type =
> +			irqd_get_trigger_type(irq_get_irq_data(chip-
> >bus.irq));
> +
> +		switch (irq_type) {
> +		case IRQF_TRIGGER_HIGH:
> +		case IRQF_TRIGGER_RISING:
> +			break;
> +		case IRQF_TRIGGER_LOW:
> +		case IRQF_TRIGGER_FALLING:
> +			break;
> +		default:
> +			dev_info(dev, "mode %d unsupported, using
> IRQF_TRIGGER_LOW\n",
> +				 irq_type);
> +			irq_type = IRQF_TRIGGER_LOW;
> +			break;
> +		}

It would be an idea to move this part [together with
devm_request_threaded_irq()] into a "adt7316_setup_irq()" function. To un-
clutter the code in the adt7316_probe() function.

>  
>  		ret = devm_request_threaded_irq(dev, chip->bus.irq,
>  						NULL,
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel



[Index of Archives]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux