Make the driver use device tree instead of the platform data.
Hence, use devm_gpiod_get_optional function to get the data from
device tree for ldac-pin and accordingly make the needed changes
in the driver.
Signed-off-by: Shreeya Patel <shreeya.patel23498@xxxxxxxxx>
---
drivers/staging/iio/addac/adt7316.c | 14 ++++++++++----
1 file changed, 10 insertions(+), 4 deletions(-)
diff --git a/drivers/staging/iio/addac/adt7316.c b/drivers/staging/iio/addac/adt7316.c
index 3f22d1088713..deb2f7b40f60 100644
--- a/drivers/staging/iio/addac/adt7316.c
+++ b/drivers/staging/iio/addac/adt7316.c
@@ -177,7 +177,7 @@
struct adt7316_chip_info {
struct adt7316_bus bus;
- u16 ldac_pin;
+ struct gpio_desc *ldac_pin;
u16 int_mask; /* 0x2f */
u8 config1;
u8 config2;
@@ -950,8 +950,8 @@ static ssize_t adt7316_store_update_DAC(struct device *dev,
if (ret)
return -EIO;
} else {
- gpio_set_value(chip->ldac_pin, 0);
- gpio_set_value(chip->ldac_pin, 1);
+ gpiod_set_value(chip->ldac_pin, 0);
+ gpiod_set_value(chip->ldac_pin, 1);
}
return len;
@@ -2120,7 +2120,13 @@ int adt7316_probe(struct device *dev, struct adt7316_bus *bus,
else
return -ENODEV;
- chip->ldac_pin = adt7316_platform_data[1];
+ chip->ldac_pin = devm_gpiod_get_optional(dev, "ldac", GPIOD_OUT_LOW);
+ if (IS_ERR(chip->ldac_pin)) {
+ ret = PTR_ERR(chip->ldac_pin);
+ dev_err(dev, "Failed to request ldac GPIO: %d\n", ret);
+ return ret;
+ }
+
if (chip->ldac_pin) {
chip->config3 |= ADT7316_DA_EN_VIA_DAC_LDCA;
if ((chip->id & ID_FAMILY_MASK) == ID_ADT75XX)
--
2.17.1
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
