Move ad2s90 resolver driver out of staging to the main tree.
Signed-off-by: Matheus Tavares <matheus.bernardino@xxxxxx>
Signed-off-by: Victor Colombo <victorcolombo@xxxxxxxxx>
---
Changes in v2:
- Disabled git move detection, to see the whole code, as Jonathan
suggested
drivers/iio/resolver/Kconfig | 10 ++
drivers/iio/resolver/Makefile | 1 +
drivers/iio/resolver/ad2s90.c | 131 ++++++++++++++++++++++++++
drivers/staging/iio/resolver/Kconfig | 10 --
drivers/staging/iio/resolver/Makefile | 1 -
drivers/staging/iio/resolver/ad2s90.c | 131 --------------------------
6 files changed, 142 insertions(+), 142 deletions(-)
create mode 100644 drivers/iio/resolver/ad2s90.c
delete mode 100644 drivers/staging/iio/resolver/ad2s90.c
diff --git a/drivers/iio/resolver/Kconfig b/drivers/iio/resolver/Kconfig
index 2ced9f22aa70..786801be54f6 100644
--- a/drivers/iio/resolver/Kconfig
+++ b/drivers/iio/resolver/Kconfig
@@ -3,6 +3,16 @@
#
menu "Resolver to digital converters"
+config AD2S90
+ tristate "Analog Devices ad2s90 driver"
+ depends on SPI
+ help
+ Say yes here to build support for Analog Devices spi resolver
+ to digital converters, ad2s90, provides direct access via sysfs.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ad2s90.
+
config AD2S1200
tristate "Analog Devices ad2s1200/ad2s1205 driver"
depends on SPI
diff --git a/drivers/iio/resolver/Makefile b/drivers/iio/resolver/Makefile
index 4e1dccae07e7..398d82d50028 100644
--- a/drivers/iio/resolver/Makefile
+++ b/drivers/iio/resolver/Makefile
@@ -2,4 +2,5 @@
# Makefile for Resolver/Synchro drivers
#
+obj-$(CONFIG_AD2S90) += ad2s90.o
obj-$(CONFIG_AD2S1200) += ad2s1200.o
diff --git a/drivers/iio/resolver/ad2s90.c b/drivers/iio/resolver/ad2s90.c
new file mode 100644
index 000000000000..f04dc5dede00
--- /dev/null
+++ b/drivers/iio/resolver/ad2s90.c
@@ -0,0 +1,131 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ad2s90.c simple support for the ADI Resolver to Digital Converters: AD2S90
+ *
+ * Copyright (c) 2010-2010 Analog Devices Inc.
+ */
+#include <linux/types.h>
+#include <linux/mutex.h>
+#include <linux/device.h>
+#include <linux/spi/spi.h>
+#include <linux/slab.h>
+#include <linux/sysfs.h>
+#include <linux/module.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+
+/*
+ * Although chip's max frequency is 2Mhz, it needs 600ns between CS and the
+ * first falling edge of SCLK, so frequency should be at most 1 / (2 * 6e-7)
+ */
+#define AD2S90_MAX_SPI_FREQ_HZ 830000
+
+struct ad2s90_state {
+ struct mutex lock; /* lock to protect rx buffer */
+ struct spi_device *sdev;
+ u8 rx[2] ____cacheline_aligned;
+};
+
+static int ad2s90_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int *val,
+ int *val2,
+ long m)
+{
+ int ret;
+ struct ad2s90_state *st = iio_priv(indio_dev);
+
+ if (chan->type != IIO_ANGL)
+ return -EINVAL;
+
+ switch (m) {
+ case IIO_CHAN_INFO_SCALE:
+ /* 2 * Pi / 2^12 */
+ *val = 6283; /* mV */
+ *val2 = 12;
+ return IIO_VAL_FRACTIONAL_LOG2;
+ case IIO_CHAN_INFO_RAW:
+ mutex_lock(&st->lock);
+ ret = spi_read(st->sdev, st->rx, 2);
+ if (ret < 0) {
+ mutex_unlock(&st->lock);
+ return ret;
+ }
+ *val = (((u16)(st->rx[0])) << 4) | ((st->rx[1] & 0xF0) >> 4);
+
+ mutex_unlock(&st->lock);
+
+ return IIO_VAL_INT;
+ default:
+ break;
+ }
+
+ return -EINVAL;
+}
+
+static const struct iio_info ad2s90_info = {
+ .read_raw = ad2s90_read_raw,
+};
+
+static const struct iio_chan_spec ad2s90_chan = {
+ .type = IIO_ANGL,
+ .indexed = 1,
+ .channel = 0,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+};
+
+static int ad2s90_probe(struct spi_device *spi)
+{
+ struct iio_dev *indio_dev;
+ struct ad2s90_state *st;
+
+ if (spi->max_speed_hz > AD2S90_MAX_SPI_FREQ_HZ) {
+ dev_err(&spi->dev, "SPI CLK, %d Hz exceeds %d Hz\n",
+ spi->max_speed_hz, AD2S90_MAX_SPI_FREQ_HZ);
+ return -EINVAL;
+ }
+
+ indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
+ if (!indio_dev)
+ return -ENOMEM;
+ st = iio_priv(indio_dev);
+ spi_set_drvdata(spi, indio_dev);
+
+ mutex_init(&st->lock);
+ st->sdev = spi;
+ indio_dev->dev.parent = &spi->dev;
+ indio_dev->info = &ad2s90_info;
+ indio_dev->modes = INDIO_DIRECT_MODE;
+ indio_dev->channels = &ad2s90_chan;
+ indio_dev->num_channels = 1;
+ indio_dev->name = spi_get_device_id(spi)->name;
+
+ return devm_iio_device_register(indio_dev->dev.parent, indio_dev);
+}
+
+static const struct of_device_id ad2s90_of_match[] = {
+ { .compatible = "adi,ad2s90", },
+ {}
+};
+MODULE_DEVICE_TABLE(of, ad2s90_of_match);
+
+static const struct spi_device_id ad2s90_id[] = {
+ { "ad2s90" },
+ {}
+};
+MODULE_DEVICE_TABLE(spi, ad2s90_id);
+
+static struct spi_driver ad2s90_driver = {
+ .driver = {
+ .name = "ad2s90",
+ .of_match_table = of_match_ptr(ad2s90_of_match),
+ },
+ .probe = ad2s90_probe,
+ .id_table = ad2s90_id,
+};
+module_spi_driver(ad2s90_driver);
+
+MODULE_AUTHOR("Graff Yang <graff.yang@xxxxxxxxx>");
+MODULE_DESCRIPTION("Analog Devices AD2S90 Resolver to Digital SPI driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/staging/iio/resolver/Kconfig b/drivers/staging/iio/resolver/Kconfig
index 6a469ee6101f..4a727c17bb8f 100644
--- a/drivers/staging/iio/resolver/Kconfig
+++ b/drivers/staging/iio/resolver/Kconfig
@@ -3,16 +3,6 @@
#
menu "Resolver to digital converters"
-config AD2S90
- tristate "Analog Devices ad2s90 driver"
- depends on SPI
- help
- Say yes here to build support for Analog Devices spi resolver
- to digital converters, ad2s90, provides direct access via sysfs.
-
- To compile this driver as a module, choose M here: the
- module will be called ad2s90.
-
config AD2S1210
tristate "Analog Devices ad2s1210 driver"
depends on SPI
diff --git a/drivers/staging/iio/resolver/Makefile b/drivers/staging/iio/resolver/Makefile
index 8d901dc7500b..b2049f2ce36e 100644
--- a/drivers/staging/iio/resolver/Makefile
+++ b/drivers/staging/iio/resolver/Makefile
@@ -2,5 +2,4 @@
# Makefile for Resolver/Synchro drivers
#
-obj-$(CONFIG_AD2S90) += ad2s90.o
obj-$(CONFIG_AD2S1210) += ad2s1210.o
diff --git a/drivers/staging/iio/resolver/ad2s90.c b/drivers/staging/iio/resolver/ad2s90.c
deleted file mode 100644
index f04dc5dede00..000000000000
--- a/drivers/staging/iio/resolver/ad2s90.c
+++ /dev/null
@@ -1,131 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * ad2s90.c simple support for the ADI Resolver to Digital Converters: AD2S90
- *
- * Copyright (c) 2010-2010 Analog Devices Inc.
- */
-#include <linux/types.h>
-#include <linux/mutex.h>
-#include <linux/device.h>
-#include <linux/spi/spi.h>
-#include <linux/slab.h>
-#include <linux/sysfs.h>
-#include <linux/module.h>
-
-#include <linux/iio/iio.h>
-#include <linux/iio/sysfs.h>
-
-/*
- * Although chip's max frequency is 2Mhz, it needs 600ns between CS and the
- * first falling edge of SCLK, so frequency should be at most 1 / (2 * 6e-7)
- */
-#define AD2S90_MAX_SPI_FREQ_HZ 830000
-
-struct ad2s90_state {
- struct mutex lock; /* lock to protect rx buffer */
- struct spi_device *sdev;
- u8 rx[2] ____cacheline_aligned;
-};
-
-static int ad2s90_read_raw(struct iio_dev *indio_dev,
- struct iio_chan_spec const *chan,
- int *val,
- int *val2,
- long m)
-{
- int ret;
- struct ad2s90_state *st = iio_priv(indio_dev);
-
- if (chan->type != IIO_ANGL)
- return -EINVAL;
-
- switch (m) {
- case IIO_CHAN_INFO_SCALE:
- /* 2 * Pi / 2^12 */
- *val = 6283; /* mV */
- *val2 = 12;
- return IIO_VAL_FRACTIONAL_LOG2;
- case IIO_CHAN_INFO_RAW:
- mutex_lock(&st->lock);
- ret = spi_read(st->sdev, st->rx, 2);
- if (ret < 0) {
- mutex_unlock(&st->lock);
- return ret;
- }
- *val = (((u16)(st->rx[0])) << 4) | ((st->rx[1] & 0xF0) >> 4);
-
- mutex_unlock(&st->lock);
-
- return IIO_VAL_INT;
- default:
- break;
- }
-
- return -EINVAL;
-}
-
-static const struct iio_info ad2s90_info = {
- .read_raw = ad2s90_read_raw,
-};
-
-static const struct iio_chan_spec ad2s90_chan = {
- .type = IIO_ANGL,
- .indexed = 1,
- .channel = 0,
- .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
-};
-
-static int ad2s90_probe(struct spi_device *spi)
-{
- struct iio_dev *indio_dev;
- struct ad2s90_state *st;
-
- if (spi->max_speed_hz > AD2S90_MAX_SPI_FREQ_HZ) {
- dev_err(&spi->dev, "SPI CLK, %d Hz exceeds %d Hz\n",
- spi->max_speed_hz, AD2S90_MAX_SPI_FREQ_HZ);
- return -EINVAL;
- }
-
- indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
- if (!indio_dev)
- return -ENOMEM;
- st = iio_priv(indio_dev);
- spi_set_drvdata(spi, indio_dev);
-
- mutex_init(&st->lock);
- st->sdev = spi;
- indio_dev->dev.parent = &spi->dev;
- indio_dev->info = &ad2s90_info;
- indio_dev->modes = INDIO_DIRECT_MODE;
- indio_dev->channels = &ad2s90_chan;
- indio_dev->num_channels = 1;
- indio_dev->name = spi_get_device_id(spi)->name;
-
- return devm_iio_device_register(indio_dev->dev.parent, indio_dev);
-}
-
-static const struct of_device_id ad2s90_of_match[] = {
- { .compatible = "adi,ad2s90", },
- {}
-};
-MODULE_DEVICE_TABLE(of, ad2s90_of_match);
-
-static const struct spi_device_id ad2s90_id[] = {
- { "ad2s90" },
- {}
-};
-MODULE_DEVICE_TABLE(spi, ad2s90_id);
-
-static struct spi_driver ad2s90_driver = {
- .driver = {
- .name = "ad2s90",
- .of_match_table = of_match_ptr(ad2s90_of_match),
- },
- .probe = ad2s90_probe,
- .id_table = ad2s90_id,
-};
-module_spi_driver(ad2s90_driver);
-
-MODULE_AUTHOR("Graff Yang <graff.yang@xxxxxxxxx>");
-MODULE_DESCRIPTION("Analog Devices AD2S90 Resolver to Digital SPI driver");
-MODULE_LICENSE("GPL v2");
--
2.18.0
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
