Re: [PATCH 1/2] staging: emxx_udc: Split line and fix eol parenthesis

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sat, 2018-11-17 at 00:46 +0100, Cristian Sicilia wrote:
> Fix some parenthesis opened at end of line.

It looks like this is all guarded by #ifdef UDC_DEBUG_DUMP
which is not ever set and this probably would not compile
if it was.

It's probably better to remove all the blocks guarded by
that flag and the flag itself.

> Signed-off-by: Cristian Sicilia <sicilia.cristian@xxxxxxxxx>
> ---
>  drivers/staging/emxx_udc/emxx_udc.c | 73 ++++++++++++++++++-------------------
>  1 file changed, 36 insertions(+), 37 deletions(-)
> 
> diff --git a/drivers/staging/emxx_udc/emxx_udc.c b/drivers/staging/emxx_udc/emxx_udc.c
> index bf7c5da..26bd77c 100644
> --- a/drivers/staging/emxx_udc/emxx_udc.c
> +++ b/drivers/staging/emxx_udc/emxx_udc.c
> @@ -108,20 +108,20 @@ static void _nbu2ss_dump_register(struct nbu2ss_udc *udc)
>  
>  	dev_dbg(&udc->dev, "\n-USB REG-\n");
>  	for (i = 0x0 ; i < USB_BASE_SIZE ; i += 16) {
> -		reg_data =   _nbu2ss_readl(
> -			(u32 *)IO_ADDRESS(USB_BASE_ADDRESS + i));
> +		reg_data = _nbu2ss_readl((u32 *)IO_ADDRESS(USB_BASE_ADDRESS +
> +					i));
>  		dev_dbg(&udc->dev, "USB%04x =%08x", i, (int)reg_data);
>  
> -		reg_data =  _nbu2ss_readl(
> -			(u32 *)IO_ADDRESS(USB_BASE_ADDRESS + i + 4));
> +		reg_data = _nbu2ss_readl((u32 *)IO_ADDRESS(USB_BASE_ADDRESS +
> +					i + 4));
>  		dev_dbg(&udc->dev, " %08x", (int)reg_data);
>  
> -		reg_data =  _nbu2ss_readl(
> -			(u32 *)IO_ADDRESS(USB_BASE_ADDRESS + i + 8));
> +		reg_data = _nbu2ss_readl((u32 *)IO_ADDRESS(USB_BASE_ADDRESS +
> +					i + 8));
>  		dev_dbg(&udc->dev, " %08x", (int)reg_data);
>  
> -		reg_data =  _nbu2ss_readl(
> -			(u32 *)IO_ADDRESS(USB_BASE_ADDRESS + i + 12));
> +		reg_data = _nbu2ss_readl((u32 *)IO_ADDRESS(USB_BASE_ADDRESS +
> +					i + 12));
>  		dev_dbg(&udc->dev, " %08x\n", (int)reg_data);
>  	}
>  
> @@ -473,22 +473,23 @@ static void _nbu2ss_dma_map_single(
>  		if (req->unaligned) {
>  			req->req.dma = ep->phys_buf;
>  		} else {
> -			req->req.dma = dma_map_single(
> -				udc->gadget.dev.parent,
> -				req->req.buf,
> -				req->req.length,
> -				(direct == USB_DIR_IN)
> -				? DMA_TO_DEVICE : DMA_FROM_DEVICE);
> +			req->req.dma =
> +				dma_map_single(udc->gadget.dev.parent,
> +					       req->req.buf,
> +					       req->req.length,
> +					       (direct == USB_DIR_IN) ?
> +						DMA_TO_DEVICE :
> +						DMA_FROM_DEVICE);
>  		}
>  		req->mapped = 1;
>  	} else {
>  		if (!req->unaligned)
> -			dma_sync_single_for_device(
> -				udc->gadget.dev.parent,
> -				req->req.dma,
> -				req->req.length,
> -				(direct == USB_DIR_IN)
> -				? DMA_TO_DEVICE : DMA_FROM_DEVICE);
> +			dma_sync_single_for_device(udc->gadget.dev.parent,
> +						   req->req.dma,
> +						   req->req.length,
> +						   (direct == USB_DIR_IN)
> +						    ? DMA_TO_DEVICE :
> +						    DMA_FROM_DEVICE);
>  
>  		req->mapped = 0;
>  	}
> @@ -975,8 +976,8 @@ static int _nbu2ss_epn_out_transfer(
>  
>  	/*-------------------------------------------------------------*/
>  	/* Receive Length */
> -	i_recv_length
> -		= _nbu2ss_readl(&preg->EP_REGS[num].EP_LEN_DCNT) & EPN_LDATA;
> +	i_recv_length =
> +		_nbu2ss_readl(&preg->EP_REGS[num].EP_LEN_DCNT) & EPN_LDATA;
>  
>  	if (i_recv_length != 0) {
>  		result = _nbu2ss_epn_out_data(udc, ep, req, i_recv_length);
> @@ -1115,10 +1116,9 @@ static int _nbu2ss_epn_in_pio(
>  		i_word_length = length / sizeof(u32);
>  		if (i_word_length > 0) {
>  			for (i = 0; i < i_word_length; i++) {
> -				_nbu2ss_writel(
> -					&preg->EP_REGS[ep->epnum - 1].EP_WRITE
> -					, p_buf_32->dw
> -				);
> +				_nbu2ss_writel(&preg->EP_REGS[ep->epnum -
> +							      1].EP_WRITE,
> +					       p_buf_32->dw);
>  
>  				p_buf_32++;
>  			}
> @@ -1472,13 +1472,11 @@ static inline int _nbu2ss_req_feature(struct nbu2ss_udc *udc, bool bset)
>  		if (0x0000 == (wIndex & 0xFF70)) {
>  			if (selector == USB_ENDPOINT_HALT) {
>  				ep_adrs = wIndex & 0xFF;
> -				if (!bset) {
> -					_nbu2ss_endpoint_toggle_reset(
> -						udc, ep_adrs);
> -				}
> +				if (!bset)
> +					_nbu2ss_endpoint_toggle_reset(udc,
> +								      ep_adrs);
>  
> -				_nbu2ss_set_endpoint_stall(
> -					udc, ep_adrs, bset);
> +				_nbu2ss_set_endpoint_stall(udc, ep_adrs, bset);
>  
>  				result = 0;
>  			}
> @@ -1524,8 +1522,8 @@ static void _nbu2ss_epn_set_stall(
>  		for (limit_cnt = 0
>  			; limit_cnt < IN_DATA_EMPTY_COUNT
>  			; limit_cnt++) {
> -			regdata = _nbu2ss_readl(
> -				&preg->EP_REGS[ep->epnum - 1].EP_STATUS);
> +			regdata = _nbu2ss_readl(&preg->EP_REGS[ep->epnum -
> +							       1].EP_STATUS);
>  
>  			if ((regdata & EPN_IN_DATA) == 0)
>  				break;
> @@ -2666,9 +2664,10 @@ static int nbu2ss_ep_queue(
>  
>  	if (req->unaligned) {
>  		if (!ep->virt_buf)
> -			ep->virt_buf = dma_alloc_coherent(
> -				NULL, PAGE_SIZE,
> -				&ep->phys_buf, GFP_ATOMIC | GFP_DMA);
> +			ep->virt_buf = dma_alloc_coherent(NULL,
> +							  PAGE_SIZE,
> +							  &ep->phys_buf,
> +							  GFP_ATOMIC | GFP_DMA);
>  		if (ep->epnum > 0)  {
>  			if (ep->direct == USB_DIR_IN)
>  				memcpy(ep->virt_buf, req->req.buf,

_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel



[Index of Archives]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux