On Thu, Nov 15, 2018 at 03:50:06PM +0100, Paul Kocialkowski wrote:
> Now that we have specific nodes for the H3 and H5 system-controller
> that allow proper access to the EMAC clock configuration register,
> we no longer need a common dummy syscon node.
>
> Switch the syscon label over to each platform's dtsi file.
>
> Signed-off-by: Paul Kocialkowski <paul.kocialkowski@xxxxxxxxxxx>
> ---
> arch/arm/boot/dts/sun8i-h3.dtsi | 2 +-
> arch/arm/boot/dts/sunxi-h3-h5.dtsi | 6 ------
> arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi | 2 +-
> 3 files changed, 2 insertions(+), 8 deletions(-)
>
> diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi
> index 7157d954fb8c..b337a9282783 100644
> --- a/arch/arm/boot/dts/sun8i-h3.dtsi
> +++ b/arch/arm/boot/dts/sun8i-h3.dtsi
> @@ -134,7 +134,7 @@
> };
>
> soc {
> - system-control@1c00000 {
> + syscon: system-control@1c00000 {
> compatible = "allwinner,sun8i-h3-system-control";
> reg = <0x01c00000 0x1000>;
> #address-cells = <1>;
> diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
> index 4b1530ebe427..9175ff0fb59a 100644
> --- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi
> +++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
> @@ -152,12 +152,6 @@
> };
> };
>
> - syscon: syscon@1c00000 {
> - compatible = "allwinner,sun8i-h3-system-controller",
> - "syscon";
> - reg = <0x01c00000 0x1000>;
> - };
> -
You're also dropping the syscon compatible there. But I'm not sure how
it could work with the H3 EMAC driver that would overwrite the
compatible already.
Maxime
--
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
Attachment:
signature.asc
Description: PGP signature
_______________________________________________ devel mailing list devel@xxxxxxxxxxxxxxxxxxxxxx http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
