Currently there is only a catch-all info message which print the
relevant error code without any context. So add more specific error
messages in order to narrow down possible issues.
Signed-off-by: Stefan Wahren <stefan.wahren@xxxxxxxx>
---
.../vc04_services/bcm2835-camera/bcm2835-camera.c | 58 +++++++++++++++-------
1 file changed, 39 insertions(+), 19 deletions(-)
diff --git a/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c b/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c
index cd773eb..84ca22d 100644
--- a/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c
+++ b/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c
@@ -1539,8 +1539,11 @@ static int mmal_init(struct bm2835_mmal_dev *dev)
struct vchiq_mmal_component *camera;
ret = vchiq_mmal_init(&dev->instance);
- if (ret < 0)
+ if (ret < 0) {
+ v4l2_err(&dev->v4l2_dev, "%s: vchiq mmal init failed %d\n",
+ __func__, ret);
return ret;
+ }
/* get the camera component ready */
ret = vchiq_mmal_component_init(dev->instance, "ril.camera",
@@ -1549,7 +1552,9 @@ static int mmal_init(struct bm2835_mmal_dev *dev)
goto unreg_mmal;
camera = dev->component[MMAL_COMPONENT_CAMERA];
- if (camera->outputs < MMAL_CAMERA_PORT_COUNT) {
+ if (camera->outputs < MMAL_CAMERA_PORT_COUNT) {
+ v4l2_err(&dev->v4l2_dev, "%s: too few camera outputs %d needed %d\n",
+ __func__, camera->outputs, MMAL_CAMERA_PORT_COUNT);
ret = -EINVAL;
goto unreg_camera;
}
@@ -1557,8 +1562,11 @@ static int mmal_init(struct bm2835_mmal_dev *dev)
ret = set_camera_parameters(dev->instance,
camera,
dev);
- if (ret < 0)
+ if (ret < 0) {
+ v4l2_err(&dev->v4l2_dev, "%s: unable to set camera parameters: %d\n",
+ __func__, ret);
goto unreg_camera;
+ }
/* There was an error in the firmware that meant the camera component
* produced BGR instead of RGB.
@@ -1647,8 +1655,8 @@ static int mmal_init(struct bm2835_mmal_dev *dev)
if (dev->component[MMAL_COMPONENT_PREVIEW]->inputs < 1) {
ret = -EINVAL;
- pr_debug("too few input ports %d needed %d\n",
- dev->component[MMAL_COMPONENT_PREVIEW]->inputs, 1);
+ v4l2_err(&dev->v4l2_dev, "%s: too few input ports %d needed %d\n",
+ __func__, dev->component[MMAL_COMPONENT_PREVIEW]->inputs, 1);
goto unreg_preview;
}
@@ -1661,8 +1669,8 @@ static int mmal_init(struct bm2835_mmal_dev *dev)
if (dev->component[MMAL_COMPONENT_IMAGE_ENCODE]->inputs < 1) {
ret = -EINVAL;
- v4l2_err(&dev->v4l2_dev, "too few input ports %d needed %d\n",
- dev->component[MMAL_COMPONENT_IMAGE_ENCODE]->inputs,
+ v4l2_err(&dev->v4l2_dev, "%s: too few input ports %d needed %d\n",
+ __func__, dev->component[MMAL_COMPONENT_IMAGE_ENCODE]->inputs,
1);
goto unreg_image_encoder;
}
@@ -1676,8 +1684,8 @@ static int mmal_init(struct bm2835_mmal_dev *dev)
if (dev->component[MMAL_COMPONENT_VIDEO_ENCODE]->inputs < 1) {
ret = -EINVAL;
- v4l2_err(&dev->v4l2_dev, "too few input ports %d needed %d\n",
- dev->component[MMAL_COMPONENT_VIDEO_ENCODE]->inputs,
+ v4l2_err(&dev->v4l2_dev, "%s: too few input ports %d needed %d\n",
+ __func__, dev->component[MMAL_COMPONENT_VIDEO_ENCODE]->inputs,
1);
goto unreg_vid_encoder;
}
@@ -1706,8 +1714,11 @@ static int mmal_init(struct bm2835_mmal_dev *dev)
sizeof(enable));
}
ret = bm2835_mmal_set_all_camera_controls(dev);
- if (ret < 0)
+ if (ret < 0) {
+ v4l2_err(&dev->v4l2_dev, "%s: failed to set all camera controls: %d\n",
+ __func__, ret);
goto unreg_vid_encoder;
+ }
return 0;
@@ -1873,21 +1884,29 @@ static int bcm2835_mmal_probe(struct platform_device *pdev)
snprintf(dev->v4l2_dev.name, sizeof(dev->v4l2_dev.name),
"%s", BM2835_MMAL_MODULE_NAME);
ret = v4l2_device_register(NULL, &dev->v4l2_dev);
- if (ret)
+ if (ret) {
+ dev_err(&pdev->dev, "%s: could not register V4L2 device: %d\n",
+ __func__, ret);
goto free_dev;
+ }
/* setup v4l controls */
ret = bm2835_mmal_init_controls(dev, &dev->ctrl_handler);
- if (ret < 0)
+ if (ret < 0) {
+ v4l2_err(&dev->v4l2_dev, "%s: could not init controls: %d\n",
+ __func__, ret);
goto unreg_dev;
+ }
dev->v4l2_dev.ctrl_handler = &dev->ctrl_handler;
/* mmal init */
dev->instance = instance;
ret = mmal_init(dev);
- if (ret < 0)
+ if (ret < 0) {
+ v4l2_err(&dev->v4l2_dev, "%s: mmal init failed: %d\n",
+ __func__, ret);
goto unreg_dev;
-
+ }
/* initialize queue */
q = &dev->capture.vb_vidq;
memset(q, 0, sizeof(*q));
@@ -1905,16 +1924,19 @@ static int bcm2835_mmal_probe(struct platform_device *pdev)
/* initialise video devices */
ret = bm2835_mmal_init_device(dev, &dev->vdev);
- if (ret < 0)
+ if (ret < 0) {
+ v4l2_err(&dev->v4l2_dev, "%s: could not init device: %d\n",
+ __func__, ret);
goto unreg_dev;
+ }
/* Really want to call vidioc_s_fmt_vid_cap with the default
* format, but currently the APIs don't join up.
*/
ret = mmal_setup_components(dev, &default_v4l2_format);
if (ret < 0) {
- v4l2_err(&dev->v4l2_dev,
- "%s: could not setup components\n", __func__);
+ v4l2_err(&dev->v4l2_dev, "%s: could not setup components: %d\n",
+ __func__, ret);
goto unreg_dev;
}
@@ -1938,8 +1960,6 @@ static int bcm2835_mmal_probe(struct platform_device *pdev)
bcm2835_cleanup_instance(gdev[i]);
gdev[i] = NULL;
}
- pr_info("%s: error %d while loading driver\n",
- BM2835_MMAL_MODULE_NAME, ret);
cleanup_mmal:
vchiq_mmal_finalise(instance);
--
2.7.4
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
