Once we are fully atomic plane->fb will always be NULL and we also
should not access things like crtc->enabled and crt->[hw]mode.
Now that we've wired up the state object handlers, we always have a
plane_state and crtc_state so change the code referencing plane->fb and
crtc->* to use the data from the plane_state and crt_state instead.
Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
drivers/staging/vboxvideo/vbox_drv.h | 1 -
drivers/staging/vboxvideo/vbox_main.c | 16 +++++++++++-----
drivers/staging/vboxvideo/vbox_mode.c | 15 +++++++--------
3 files changed, 18 insertions(+), 14 deletions(-)
diff --git a/drivers/staging/vboxvideo/vbox_drv.h b/drivers/staging/vboxvideo/vbox_drv.h
index 7fc668ff4465..fccb3851d6a3 100644
--- a/drivers/staging/vboxvideo/vbox_drv.h
+++ b/drivers/staging/vboxvideo/vbox_drv.h
@@ -199,7 +199,6 @@ int vbox_mode_init(struct vbox_private *vbox);
void vbox_mode_fini(struct vbox_private *vbox);
#define DRM_MODE_FB_CMD drm_mode_fb_cmd2
-#define CRTC_FB(crtc) ((crtc)->primary->fb)
void vbox_enable_accel(struct vbox_private *vbox);
void vbox_disable_accel(struct vbox_private *vbox);
diff --git a/drivers/staging/vboxvideo/vbox_main.c b/drivers/staging/vboxvideo/vbox_main.c
index 95100c5976e4..3b82d483ab51 100644
--- a/drivers/staging/vboxvideo/vbox_main.c
+++ b/drivers/staging/vboxvideo/vbox_main.c
@@ -102,24 +102,30 @@ void vbox_framebuffer_dirty_rectangles(struct drm_framebuffer *fb,
unsigned int num_rects)
{
struct vbox_private *vbox = fb->dev->dev_private;
+ struct drm_display_mode *mode;
struct drm_crtc *crtc;
+ int crtc_x, crtc_y;
unsigned int i;
mutex_lock(&vbox->hw_mutex);
list_for_each_entry(crtc, &fb->dev->mode_config.crtc_list, head) {
- if (CRTC_FB(crtc) != fb)
+ if (crtc->primary->state->fb != fb)
continue;
+ mode = &crtc->state->mode;
+ crtc_x = crtc->primary->state->src_x >> 16;
+ crtc_y = crtc->primary->state->src_y >> 16;
+
vbox_enable_accel(vbox);
for (i = 0; i < num_rects; ++i) {
struct vbva_cmd_hdr cmd_hdr;
unsigned int crtc_id = to_vbox_crtc(crtc)->crtc_id;
- if ((rects[i].x1 > crtc->x + crtc->hwmode.hdisplay) ||
- (rects[i].y1 > crtc->y + crtc->hwmode.vdisplay) ||
- (rects[i].x2 < crtc->x) ||
- (rects[i].y2 < crtc->y))
+ if ((rects[i].x1 > crtc_x + mode->hdisplay) ||
+ (rects[i].y1 > crtc_y + mode->vdisplay) ||
+ (rects[i].x2 < crtc_x) ||
+ (rects[i].y2 < crtc_y))
continue;
cmd_hdr.x = (s16)rects[i].x1;
diff --git a/drivers/staging/vboxvideo/vbox_mode.c b/drivers/staging/vboxvideo/vbox_mode.c
index cb897b672752..54e6aac784f7 100644
--- a/drivers/staging/vboxvideo/vbox_mode.c
+++ b/drivers/staging/vboxvideo/vbox_mode.c
@@ -46,6 +46,7 @@
*/
static void vbox_do_modeset(struct drm_crtc *crtc)
{
+ struct drm_framebuffer *fb = crtc->primary->state->fb;
struct vbox_crtc *vbox_crtc = to_vbox_crtc(crtc);
struct vbox_private *vbox;
int width, height, bpp, pitch;
@@ -55,8 +56,8 @@ static void vbox_do_modeset(struct drm_crtc *crtc)
vbox = crtc->dev->dev_private;
width = vbox_crtc->width ? vbox_crtc->width : 640;
height = vbox_crtc->height ? vbox_crtc->height : 480;
- bpp = crtc->enabled ? CRTC_FB(crtc)->format->cpp[0] * 8 : 32;
- pitch = crtc->enabled ? CRTC_FB(crtc)->pitches[0] : width * bpp / 8;
+ bpp = fb ? fb->format->cpp[0] * 8 : 32;
+ pitch = fb ? fb->pitches[0] : width * bpp / 8;
x_offset = vbox->single_framebuffer ? vbox_crtc->x : vbox_crtc->x_hint;
y_offset = vbox->single_framebuffer ? vbox_crtc->y : vbox_crtc->y_hint;
@@ -66,14 +67,13 @@ static void vbox_do_modeset(struct drm_crtc *crtc)
* VirtualBox, certain parts of the code still assume that the first
* screen is programmed this way, so try to fake it.
*/
- if (vbox_crtc->crtc_id == 0 && crtc->enabled &&
+ if (vbox_crtc->crtc_id == 0 && fb &&
vbox_crtc->fb_offset / pitch < 0xffff - crtc->y &&
vbox_crtc->fb_offset % (bpp / 8) == 0) {
vbox_write_ioport(VBE_DISPI_INDEX_XRES, width);
vbox_write_ioport(VBE_DISPI_INDEX_YRES, height);
vbox_write_ioport(VBE_DISPI_INDEX_VIRT_WIDTH, pitch * 8 / bpp);
- vbox_write_ioport(VBE_DISPI_INDEX_BPP,
- CRTC_FB(crtc)->format->cpp[0] * 8);
+ vbox_write_ioport(VBE_DISPI_INDEX_BPP, bpp);
vbox_write_ioport(VBE_DISPI_INDEX_ENABLE, VBE_DISPI_ENABLED);
vbox_write_ioport(
VBE_DISPI_INDEX_X_OFFSET,
@@ -83,8 +83,7 @@ static void vbox_do_modeset(struct drm_crtc *crtc)
}
flags = VBVA_SCREEN_F_ACTIVE;
- flags |= (crtc->enabled && !vbox_crtc->blanked) ?
- 0 : VBVA_SCREEN_F_BLANK;
+ flags |= (fb && !vbox_crtc->blanked) ? 0 : VBVA_SCREEN_F_BLANK;
flags |= vbox_crtc->disconnected ? VBVA_SCREEN_F_DISABLED : 0;
hgsmi_process_display_info(vbox->guest_pool, vbox_crtc->crtc_id,
x_offset, y_offset,
@@ -176,7 +175,7 @@ static bool vbox_set_up_input_mapping(struct vbox_private *vbox)
* Same fall-back if this is the fbdev frame-buffer.
*/
list_for_each_entry(crtci, &vbox->ddev.mode_config.crtc_list, head) {
- fb = CRTC_FB(crtci);
+ fb = crtci->primary->state->fb;
if (!fb)
continue;
--
2.19.0
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
