[PATCH 19/23] rtl8192e: Delete unused dm_change_dynamic_initgain_thresh

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Signed-off-by: Mike McCormack <mikem@xxxxxxxxxx>
---
 drivers/staging/rtl8192e/r8192E_dm.c |   70 ----------------------------------
 drivers/staging/rtl8192e/r8192E_dm.h |    2 -
 2 files changed, 0 insertions(+), 72 deletions(-)

diff --git a/drivers/staging/rtl8192e/r8192E_dm.c b/drivers/staging/rtl8192e/r8192E_dm.c
index 50e276f..974555b 100644
--- a/drivers/staging/rtl8192e/r8192E_dm.c
+++ b/drivers/staging/rtl8192e/r8192E_dm.c
@@ -1111,76 +1111,6 @@ void dm_cck_txpower_adjust(struct r8192_priv *priv, bool binch14)
 		dm_CCKTxPowerAdjust_ThermalMeter(priv, binch14);
 }
 
-
-void dm_change_dynamic_initgain_thresh(struct net_device *dev, u32 dm_type, u32	dm_value)
-{
-	if (dm_type == DIG_TYPE_THRESH_HIGH)
-	{
-		dm_digtable.rssi_high_thresh = dm_value;
-	}
-	else if (dm_type == DIG_TYPE_THRESH_LOW)
-	{
-		dm_digtable.rssi_low_thresh = dm_value;
-	}
-	else if (dm_type == DIG_TYPE_THRESH_HIGHPWR_HIGH)
-	{
-		dm_digtable.rssi_high_power_highthresh = dm_value;
-	}
-	else if (dm_type == DIG_TYPE_THRESH_HIGHPWR_HIGH)
-	{
-		dm_digtable.rssi_high_power_highthresh = dm_value;
-	}
-	else if (dm_type == DIG_TYPE_ENABLE)
-	{
-		dm_digtable.dig_state		= DM_STA_DIG_MAX;
-		dm_digtable.dig_enable_flag	= true;
-	}
-	else if (dm_type == DIG_TYPE_DISABLE)
-	{
-		dm_digtable.dig_state		= DM_STA_DIG_MAX;
-		dm_digtable.dig_enable_flag	= false;
-	}
-	else if (dm_type == DIG_TYPE_DBG_MODE)
-	{
-		if(dm_value >= DM_DBG_MAX)
-			dm_value = DM_DBG_OFF;
-		dm_digtable.dbg_mode		= (u8)dm_value;
-	}
-	else if (dm_type == DIG_TYPE_RSSI)
-	{
-		if(dm_value > 100)
-			dm_value = 30;
-		dm_digtable.rssi_val			= (long)dm_value;
-	}
-	else if (dm_type == DIG_TYPE_ALGORITHM)
-	{
-		if (dm_value >= DIG_ALGO_MAX)
-			dm_value = DIG_ALGO_BY_FALSE_ALARM;
-		if(dm_digtable.dig_algorithm != (u8)dm_value)
-			dm_digtable.dig_algorithm_switch = 1;
-		dm_digtable.dig_algorithm	= (u8)dm_value;
-	}
-	else if (dm_type == DIG_TYPE_BACKOFF)
-	{
-		if(dm_value > 30)
-			dm_value = 30;
-		dm_digtable.backoff_val		= (u8)dm_value;
-	}
-	else if(dm_type == DIG_TYPE_RX_GAIN_MIN)
-	{
-		if(dm_value == 0)
-			dm_value = 0x1;
-		dm_digtable.rx_gain_range_min = (u8)dm_value;
-	}
-	else if(dm_type == DIG_TYPE_RX_GAIN_MAX)
-	{
-		if(dm_value > 0x50)
-			dm_value = 0x50;
-		dm_digtable.rx_gain_range_max = (u8)dm_value;
-	}
-}
-
-
 /* Set DIG scheme init value. */
 static void dm_dig_init(struct r8192_priv *priv)
 {
diff --git a/drivers/staging/rtl8192e/r8192E_dm.h b/drivers/staging/rtl8192e/r8192E_dm.h
index 16dcb03..de72a33 100644
--- a/drivers/staging/rtl8192e/r8192E_dm.h
+++ b/drivers/staging/rtl8192e/r8192E_dm.h
@@ -221,8 +221,6 @@ void init_rate_adaptive(struct net_device *dev);
 void dm_txpower_trackingcallback(struct work_struct *work);
 void dm_restore_dynamic_mechanism_state(struct net_device *dev);
 void dm_backup_dynamic_mechanism_state(struct net_device *dev);
-void dm_change_dynamic_initgain_thresh(struct net_device *dev, u32 dm_type,
-                                       u32 dm_value);
 void DM_ChangeFsyncSetting(struct net_device *dev, s32 DM_Type, s32 DM_Value);
 void dm_force_tx_fw_info(struct net_device *dev, u32 force_type,
 			 u32 force_value);
-- 
1.7.0.4


_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel


[Index of Archives]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux