On 17/09/2018 18:51, Florian Fainelli wrote:
On 09/17/2018 04:47 AM, Phil Elwell wrote:
Hi Stefan,
On 17/09/2018 12:39, Stefan Wahren wrote:
Hi Phil,
Am 17.09.2018 um 10:22 schrieb Phil Elwell:
Both sides of the VCHIQ communications mechanism need to agree on the cache
line size. Using an incorrect value can lead to data corruption, but having the
two sides using different values is usually worse.
In the absence of an obvious convenient run-time method to determine the
correct value in the ARCH=arm world, the downstream Raspberry Pi trees used a
Device Tree property, written by the firmware, to configure the kernel driver.
This method was vetoed during the upstreaming process, so a fixed value of 32
was used instead, and some corruptions ensued. This is take 2 at arriving at
the correct value.
Add a new compatible string - "brcm,bcm2836-vchiq" - to indicate an SoC with
a 64-byte cache line. Document the new string in the binding, and use it on
the appropriate platforms.
The final patch is a (seemingly cosmetic) correction of the Device Tree "reg"
declaration for the device node, but it doubles as an indication to the
Raspberry Pi firmware that the kernel driver is running a recent kernel driver
that chooses the correct value. As such it would help if the DT patches are
not merged before the driver patch.
v3: Builds without errors, tested on multiple Raspberry Pi models.
v2: Replaced ARM-specific logic used to determine cache line size with
a new compatible string for BCM2836 and BCM2837.
Phil Elwell (4):
staging/vc04_services: Use correct cache line size
dt-bindings: soc: Document "brcm,bcm2836-vchiq"
ARM: dts: bcm283x: Correct vchiq compatible string
ARM: dts: bcm283x: Correct mailbox register sizes
since my pull requests are out, would it be okay to apply patch #1 for
4.20 and the DT stuff for 4.21 (with the assumption Rob is okay with
these patches)?
Patch 4 is the only one I'd like to be delayed, but delaying 2-4 is fine with me.
Humm, did you mean you would like not to be delayed? In any case Stefan,
you can send an additional pull request, and I will merge it and send a
second pull request towards ARM SoC maintainers, that's not a problem.
No, I meant what I wrote - I would prefer patch 1 to be merged before patch 4 (or at least
in the same release) to avoid the need for another firmware change, hence delaying patch
4 is good. It makes sense for the other commits to be merged in that order, but the
normal compatible-string fallback mechanism means there is no hard dependency there.
Phil
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
