On Monday, 13 August 2018 17:50:15 MSK Thierry Reding wrote:
> From: Thierry Reding <treding@xxxxxxxxxx>
>
> Tegra114 and Tegra124 support reference picture marking, which will
> cause BSEV to write picture marking data to SDRAM. Make sure there is
> a valid destination address for that data to avoid error messages from
> the memory controller.
>
> Signed-off-by: Thierry Reding <treding@xxxxxxxxxx>
> ---
> drivers/staging/media/tegra-vde/tegra-vde.c | 54 ++++++++++++++++++++-
> drivers/staging/media/tegra-vde/uapi.h | 3 ++
> 2 files changed, 55 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/staging/media/tegra-vde/tegra-vde.c
> b/drivers/staging/media/tegra-vde/tegra-vde.c index
> 9d8f833744db..3027b11b11ae 100644
> --- a/drivers/staging/media/tegra-vde/tegra-vde.c
> +++ b/drivers/staging/media/tegra-vde/tegra-vde.c
> @@ -60,7 +60,12 @@ struct video_frame {
> u32 flags;
> };
>
> +struct tegra_vde_soc {
> + bool supports_ref_pic_marking;
> +};
> +
> struct tegra_vde {
> + const struct tegra_vde_soc *soc;
> void __iomem *sxe;
> void __iomem *bsev;
> void __iomem *mbe;
> @@ -330,6 +335,7 @@ static int tegra_vde_setup_hw_context(struct tegra_vde
> *vde, struct video_frame *dpb_frames,
> dma_addr_t bitstream_data_addr,
> size_t bitstream_data_size,
> + dma_addr_t secure_addr,
> unsigned int macroblocks_nb)
> {
> struct device *dev = vde->miscdev.parent;
> @@ -454,6 +460,9 @@ static int tegra_vde_setup_hw_context(struct tegra_vde
> *vde,
>
> VDE_WR(bitstream_data_addr, vde->sxe + 0x6C);
>
> + if (vde->soc->supports_ref_pic_marking)
> + VDE_WR(secure_addr, vde->sxe + 0x7c);
> +
> value = 0x10000005;
> value |= ctx->pic_width_in_mbs << 11;
> value |= ctx->pic_height_in_mbs << 3;
> @@ -772,12 +781,15 @@ static int tegra_vde_ioctl_decode_h264(struct
> tegra_vde *vde, struct tegra_vde_h264_frame __user *frames_user;
> struct video_frame *dpb_frames;
> struct dma_buf_attachment *bitstream_data_dmabuf_attachment;
> - struct sg_table *bitstream_sgt;
> + struct dma_buf_attachment *secure_attachment = NULL;
> + struct sg_table *bitstream_sgt, *secure_sgt;
> enum dma_data_direction dma_dir;
> dma_addr_t bitstream_data_addr;
> + dma_addr_t secure_addr;
> dma_addr_t bsev_ptr;
> size_t lsize, csize;
> size_t bitstream_data_size;
> + size_t secure_size;
secure_size is unused, you could omit it and replace with NULL below.
> unsigned int macroblocks_nb;
> unsigned int read_bytes;
> unsigned int cstride;
> @@ -803,6 +815,18 @@ static int tegra_vde_ioctl_decode_h264(struct tegra_vde
> *vde, if (ret)
> return ret;
>
> + if (vde->soc->supports_ref_pic_marking) {
> + ret = tegra_vde_attach_dmabuf(dev, ctx.secure_fd,
> + ctx.secure_offset, 0, SZ_256,
Minimum buffer size? Since it's coming from userspace, you must specify it to
validate buffers size correctly.
> + &secure_attachment,
> + &secure_addr,
> + &secure_sgt,
> + &secure_size,
> + DMA_TO_DEVICE);
> + if (ret)
> + goto release_bitstream_dmabuf;
> + }
> +
> dpb_frames = kcalloc(ctx.dpb_frames_nb, sizeof(*dpb_frames),
> GFP_KERNEL);
> if (!dpb_frames) {
> @@ -876,6 +900,7 @@ static int tegra_vde_ioctl_decode_h264(struct tegra_vde
> *vde, ret = tegra_vde_setup_hw_context(vde, &ctx, dpb_frames,
> bitstream_data_addr,
> bitstream_data_size,
> + secure_addr,
> macroblocks_nb);
> if (ret)
> goto put_runtime_pm;
> @@ -929,6 +954,10 @@ static int tegra_vde_ioctl_decode_h264(struct tegra_vde
> *vde, kfree(dpb_frames);
>
> release_bitstream_dmabuf:
release_secure_dmabuf:
> + if (secure_attachment)
> + tegra_vde_detach_and_put_dmabuf(secure_attachment, secure_sgt,
> + DMA_TO_DEVICE);
> +
> tegra_vde_detach_and_put_dmabuf(bitstream_data_dmabuf_attachment,
> bitstream_sgt, DMA_TO_DEVICE);
>
> @@ -1029,6 +1058,8 @@ static int tegra_vde_probe(struct platform_device
> *pdev)
>
> platform_set_drvdata(pdev, vde);
>
> + vde->soc = of_device_get_match_data(&pdev->dev);
> +
> regs = platform_get_resource_byname(pdev, IORESOURCE_MEM, "sxe");
> if (!regs)
> return -ENODEV;
> @@ -1258,8 +1289,27 @@ static const struct dev_pm_ops tegra_vde_pm_ops = {
> tegra_vde_pm_resume)
> };
>
> +static const struct tegra_vde_soc tegra20_vde_soc = {
> + .supports_ref_pic_marking = false,
> +};
> +
> +static const struct tegra_vde_soc tegra30_vde_soc = {
> + .supports_ref_pic_marking = false,
> +};
> +
> +static const struct tegra_vde_soc tegra114_vde_soc = {
> + .supports_ref_pic_marking = true,
> +};
> +
> +static const struct tegra_vde_soc tegra124_vde_soc = {
> + .supports_ref_pic_marking = true,
> +};
> +
> static const struct of_device_id tegra_vde_of_match[] = {
> - { .compatible = "nvidia,tegra20-vde", },
> + { .compatible = "nvidia,tegra124-vde", .data = &tegra124_vde_soc },
> + { .compatible = "nvidia,tegra114-vde", .data = &tegra114_vde_soc },
> + { .compatible = "nvidia,tegra30-vde", .data = &tegra30_vde_soc },
> + { .compatible = "nvidia,tegra20-vde", .data = &tegra20_vde_soc },
> { },
> };
> MODULE_DEVICE_TABLE(of, tegra_vde_of_match);
> diff --git a/drivers/staging/media/tegra-vde/uapi.h
> b/drivers/staging/media/tegra-vde/uapi.h index a50c7bcae057..58bfd56de55e
> 100644
> --- a/drivers/staging/media/tegra-vde/uapi.h
> +++ b/drivers/staging/media/tegra-vde/uapi.h
> @@ -35,6 +35,9 @@ struct tegra_vde_h264_decoder_ctx {
> __s32 bitstream_data_fd;
> __u32 bitstream_data_offset;
>
> + __s32 secure_fd;
> + __u32 secure_offset;
> +
If the sole purpose of this buffer is to hold some data that VDE produces
during the decoding process and there is no use for this data in userspace,
why this buffer should be exposed to userspace at all and not made internal to
VDE driver?
> __u64 dpb_frames_ptr;
> __u8 dpb_frames_nb;
> __u8 dpb_ref_frames_with_earlier_poc_nb;
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
