On Fri, Aug 03 2018, Sergio Paracuellos wrote:
> This patch series include an attempt to avoid the use of custom
> read and writes in driver code and use PCI subsystem common ones.
>
> In order to do this 'map_bus' callback is implemented and also
> data structures for driver are included. The regs base address
> ranges and data is being readed from device tree and the driver
> gets clean a lot of code.
>
> This patchet also removes all legacy PCI code using now PCI_DRIVERS_GENERIC
> kernel api.
>
> Changes in v10:
> - PATCH 1: Do 'ioremap' directly using 'ranges.cpu_addr' from the
> io resource and add it directly as a resource to the resources list
> like mips pci-legacy code do for this. We cannot do anything else since
> using new kernel pci generic apis (call to 'devm_of_pci_get_host_bridge_resources')
> we get bad io resource getting 'OF_BAD_ADDR' because of the fact that the
> io resource for this platform starts in 0x1e160000 which is higher than
> IO_SPACE_LIMIT (0xFFFF). Because of this io resource is not added to the resources
> list and system gets into a not working state.
> - Other patches rebased and adapted to this changes.
And...... we have a winner !!!
Tested-by: NeilBrown <neil@xxxxxxxxxx>
I haven't actually looked at the code - just compiled, booted, saw that
the SATA drive appears to work.
Thanks,
NeilBrown
Starting kernel ...
[ 0.000000] Linux version 4.18.0-rc7+ (neilb@noble) (gcc version 7.2.0 (GCC)) #279 SMP Mon Aug 6 10:17:08 AEST 2018
[ 0.000000] SoC Type: MediaTek MT7621 ver:1 eco:3
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc)
[ 0.000000] MIPS: machine is GB-PC1
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 1c000000 @ 00000000 (usable)
[ 0.000000] memory: 04000000 @ 20000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] VPE topology {2,2} total 4
[ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[ 0.000000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x0000000000000000-0x000000001fffffff]
[ 0.000000] HighMem [mem 0x0000000020000000-0x0000000023ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x000000001bffffff]
[ 0.000000] node 0: [mem 0x0000000020000000-0x0000000023ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000023ffffff]
[ 0.000000] random: get_random_bytes called from start_kernel+0xb4/0x4ec with crng_init=0
[ 0.000000] percpu: Embedded 15 pages/cpu @(ptrval) s30480 r8192 d22768 u61440
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 130048
[ 0.000000] Kernel command line: console=ttyS0,57600
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Writing ErrCtl register=000108a2
[ 0.000000] Readback ErrCtl register=000108a2
[ 0.000000] Memory: 504788K/524288K available (6135K kernel code, 228K rwdata, 1052K rodata, 6524K init, 241K bss, 19500K reserved, 0K cma-reserved, 65536K highmem)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS: 256
[ 0.000000] clocksource: GIC: mask: 0xffffffffffffffff max_cycles: 0xcf914c9718, max_idle_ns: 440795231327 ns
[ 0.000000] sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps every 21474836475000000ns
[ 0.010000] Calibrating delay loop... 597.60 BogoMIPS (lpj=2988032)
[ 0.070000] pid_max: default: 32768 minimum: 301
[ 0.080000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.090000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.100000] Hierarchical SRCU implementation.
[ 0.110000] smp: Bringing up secondary CPUs ...
[ 0.120000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[ 0.120000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[ 0.120000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[ 0.120000] CPU1 revision is: 0001992f (MIPS 1004Kc)
[ 0.180000] Synchronize counters for CPU 1: done.
[ 0.220000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[ 0.220000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[ 0.220000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[ 0.220000] CPU2 revision is: 0001992f (MIPS 1004Kc)
[ 0.280000] Synchronize counters for CPU 2: done.
[ 0.320000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[ 0.320000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[ 0.320000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[ 0.320000] CPU3 revision is: 0001992f (MIPS 1004Kc)
[ 0.380000] Synchronize counters for CPU 3: done.
[ 0.420000] smp: Brought up 1 node, 4 CPUs
[ 0.430000] devtmpfs: initialized
[ 0.480000] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.490000] futex hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.500000] pinctrl core: initialized pinctrl subsystem
[ 0.510000] NET: Registered protocol family 16
[ 0.870000] ***** Xtal 40MHz *****
[ 0.880000] Port 0 N_FTS = 1b102800
[ 0.880000] Port 1 N_FTS = 1b102800
[ 0.890000] Port 2 N_FTS = 1b102800
[ 1.950000] PCIE0 enabled
[ 1.950000] PCIE1 enabled
[ 1.960000] PCIE2 enabled
[ 1.960000] PCI coherence region base: 0x60000000, mask/settings: 0xf0000002
[ 1.980000] mt7621-pci 1e140000.pcie: PCI host bridge to bus 0000:00
[ 1.990000] pci_bus 0000:00: root bus resource [io 0xffffffff]
[ 2.000000] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff]
[ 2.020000] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 2.030000] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 2.050000] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 2.060000] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 2.080000] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[ 2.100000] pci 0000:00:01.0: PCI bridge to [bus 02-ff]
[ 2.110000] pci 0000:00:02.0: PCI bridge to [bus 03-ff]
[ 2.120000] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000]
[ 2.130000] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000]
[ 2.150000] pci 0000:00:01.0: BAR 0: no space for [mem size 0x80000000]
[ 2.160000] pci 0000:00:01.0: BAR 0: failed to assign [mem size 0x80000000]
[ 2.170000] pci 0000:00:02.0: BAR 0: no space for [mem size 0x80000000]
[ 2.190000] pci 0000:00:02.0: BAR 0: failed to assign [mem size 0x80000000]
[ 2.200000] pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff]
[ 2.210000] pci 0000:00:00.0: BAR 9: assigned [mem 0x60100000-0x601fffff pref]
[ 2.230000] pci 0000:00:01.0: BAR 8: assigned [mem 0x60200000-0x602fffff]
[ 2.240000] pci 0000:00:01.0: BAR 9: assigned [mem 0x60300000-0x603fffff pref]
[ 2.250000] pci 0000:00:02.0: BAR 8: assigned [mem 0x60400000-0x604fffff]
[ 2.270000] pci 0000:00:02.0: BAR 9: assigned [mem 0x60500000-0x605fffff pref]
[ 2.280000] pci 0000:00:00.0: BAR 1: assigned [mem 0x60600000-0x6060ffff]
[ 2.290000] pci 0000:00:01.0: BAR 1: assigned [mem 0x60610000-0x6061ffff]
[ 2.310000] pci 0000:00:02.0: BAR 1: assigned [mem 0x60620000-0x6062ffff]
[ 2.320000] pci 0000:00:00.0: BAR 7: no space for [io size 0x1000]
[ 2.330000] pci 0000:00:00.0: BAR 7: failed to assign [io size 0x1000]
[ 2.350000] pci 0000:00:01.0: BAR 7: no space for [io size 0x1000]
[ 2.360000] pci 0000:00:01.0: BAR 7: failed to assign [io size 0x1000]
[ 2.370000] pci 0000:00:02.0: BAR 7: no space for [io size 0x1000]
[ 2.380000] pci 0000:00:02.0: BAR 7: failed to assign [io size 0x1000]
[ 2.400000] pci 0000:01:00.0: BAR 5: assigned [mem 0x60000000-0x600001ff]
[ 2.410000] pci 0000:01:00.0: BAR 4: no space for [io size 0x0010]
[ 2.420000] pci 0000:01:00.0: BAR 4: failed to assign [io size 0x0010]
[ 2.440000] pci 0000:01:00.0: BAR 0: no space for [io size 0x0008]
[ 2.450000] pci 0000:01:00.0: BAR 0: failed to assign [io size 0x0008]
[ 2.460000] pci 0000:01:00.0: BAR 2: no space for [io size 0x0008]
[ 2.470000] pci 0000:01:00.0: BAR 2: failed to assign [io size 0x0008]
[ 2.490000] pci 0000:01:00.0: BAR 1: no space for [io size 0x0004]
[ 2.500000] pci 0000:01:00.0: BAR 1: failed to assign [io size 0x0004]
[ 2.510000] pci 0000:01:00.0: BAR 3: no space for [io size 0x0004]
[ 2.520000] pci 0000:01:00.0: BAR 3: failed to assign [io size 0x0004]
[ 2.540000] pci 0000:00:00.0: PCI bridge to [bus 01]
[ 2.550000] pci 0000:00:00.0: bridge window [mem 0x60000000-0x600fffff]
[ 2.560000] pci 0000:00:00.0: bridge window [mem 0x60100000-0x601fffff pref]
[ 2.570000] pci 0000:02:00.0: BAR 5: assigned [mem 0x60200000-0x602001ff]
[ 2.590000] pci 0000:02:00.0: BAR 4: no space for [io size 0x0010]
[ 2.600000] pci 0000:02:00.0: BAR 4: failed to assign [io size 0x0010]
[ 2.610000] pci 0000:02:00.0: BAR 0: no space for [io size 0x0008]
[ 2.620000] pci 0000:02:00.0: BAR 0: failed to assign [io size 0x0008]
[ 2.640000] pci 0000:02:00.0: BAR 2: no space for [io size 0x0008]
[ 2.650000] pci 0000:02:00.0: BAR 2: failed to assign [io size 0x0008]
[ 2.660000] pci 0000:02:00.0: BAR 1: no space for [io size 0x0004]
[ 2.670000] pci 0000:02:00.0: BAR 1: failed to assign [io size 0x0004]
[ 2.690000] pci 0000:02:00.0: BAR 3: no space for [io size 0x0004]
[ 2.700000] pci 0000:02:00.0: BAR 3: failed to assign [io size 0x0004]
[ 2.710000] pci 0000:00:01.0: PCI bridge to [bus 02]
[ 2.720000] pci 0000:00:01.0: bridge window [mem 0x60200000-0x602fffff]
[ 2.740000] pci 0000:00:01.0: bridge window [mem 0x60300000-0x603fffff pref]
[ 2.750000] pci 0000:03:00.0: BAR 5: assigned [mem 0x60400000-0x604001ff]
[ 2.760000] pci 0000:03:00.0: BAR 4: no space for [io size 0x0010]
[ 2.780000] pci 0000:03:00.0: BAR 4: failed to assign [io size 0x0010]
[ 2.790000] pci 0000:03:00.0: BAR 0: no space for [io size 0x0008]
[ 2.800000] pci 0000:03:00.0: BAR 0: failed to assign [io size 0x0008]
[ 2.810000] pci 0000:03:00.0: BAR 2: no space for [io size 0x0008]
[ 2.830000] pci 0000:03:00.0: BAR 2: failed to assign [io size 0x0008]
[ 2.840000] pci 0000:03:00.0: BAR 1: no space for [io size 0x0004]
[ 2.850000] pci 0000:03:00.0: BAR 1: failed to assign [io size 0x0004]
[ 2.860000] pci 0000:03:00.0: BAR 3: no space for [io size 0x0004]
[ 2.880000] pci 0000:03:00.0: BAR 3: failed to assign [io size 0x0004]
[ 2.890000] pci 0000:00:02.0: PCI bridge to [bus 03]
[ 2.900000] pci 0000:00:02.0: bridge window [mem 0x60400000-0x604fffff]
[ 2.910000] pci 0000:00:02.0: bridge window [mem 0x60500000-0x605fffff pref]
[ 3.000000] SCSI subsystem initialized
[ 3.010000] random: fast init done
[ 3.020000] clocksource: Switched to clocksource GIC
[ 3.050000] NET: Registered protocol family 2
[ 3.060000] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes)
[ 3.070000] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 3.090000] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 3.100000] TCP: Hash tables configured (established 4096 bind 4096)
[ 3.110000] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 3.130000] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 3.140000] NET: Registered protocol family 1
[ 8.130000] Initialise system trusted keyrings
[ 8.140000] workingset: timestamp_bits=30 max_order=17 bucket_order=0
[ 8.270000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 8.280000] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
[ 8.310000] SGI XFS with security attributes, no debug enabled
[ 8.360000] Key type asymmetric registered
[ 8.370000] Asymmetric key parser 'x509' registered
[ 8.380000] bounce: pool size: 64 pages
[ 8.380000] io scheduler noop registered
[ 8.390000] io scheduler deadline registered (default)
[ 8.400000] io scheduler mq-deadline registered (default)
[ 8.410000] io scheduler kyber registered
[ 8.430000] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled
[ 8.450000] console [ttyS0] disabled
[ 8.460000] 1e000c00.uartlite: ttyS0 at MMIO 0x1e000c00 (irq = 18, base_baud = 3125000) is a 16550A
[ 8.480000] console [ttyS0] enabled
[ 8.480000] console [ttyS0] enabled
[ 8.490000] bootconsole [early0] disabled
[ 8.490000] bootconsole [early0] disabled
[ 8.510000] cacheinfo: Failed to find cpu0 device node
[ 8.520000] cacheinfo: Unable to detect cache hierarchy for CPU 0
[ 8.610000] loop: module loaded
[ 8.620000] pci 0000:00:00.0: enabling device (0004 -> 0006)
[ 8.630000] ahci 0000:01:00.0: enabling device (0000 -> 0002)
[ 8.640000] ahci 0000:01:00.0: SSS flag set, parallel bus scan disabled
[ 8.650000] ahci 0000:01:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl IDE mode
[ 8.670000] ahci 0000:01:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs
[ 8.700000] scsi host0: ahci
[ 8.710000] scsi host1: ahci
[ 8.710000] ata1: SATA max UDMA/133 abar m512@0x60000000 port 0x60000100 irq 23
[ 8.730000] ata2: SATA max UDMA/133 abar m512@0x60000000 port 0x60000180 irq 23
[ 8.740000] pci 0000:00:01.0: enabling device (0004 -> 0006)
[ 8.750000] ahci 0000:02:00.0: enabling device (0000 -> 0002)
[ 8.770000] ahci 0000:02:00.0: SSS flag set, parallel bus scan disabled
[ 8.780000] ahci 0000:02:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl IDE mode
[ 8.800000] ahci 0000:02:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs
[ 8.820000] scsi host2: ahci
[ 8.830000] scsi host3: ahci
[ 8.840000] ata3: SATA max UDMA/133 abar m512@0x60200000 port 0x60200100 irq 24
[ 8.850000] ata4: SATA max UDMA/133 abar m512@0x60200000 port 0x60200180 irq 24
[ 8.870000] pci 0000:00:02.0: enabling device (0004 -> 0006)
[ 8.880000] ahci 0000:03:00.0: enabling device (0000 -> 0002)
[ 8.890000] ahci 0000:03:00.0: SSS flag set, parallel bus scan disabled
[ 8.900000] ahci 0000:03:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl IDE mode
[ 8.920000] ahci 0000:03:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs
[ 8.950000] scsi host4: ahci
[ 8.950000] scsi host5: ahci
[ 8.960000] ata5: SATA max UDMA/133 abar m512@0x60400000 port 0x60400100 irq 25
[ 8.980000] ata6: SATA max UDMA/133 abar m512@0x60400000 port 0x60400180 irq 25
[ 9.000000] libphy: Fixed MDIO Bus: probed
[ 9.000000] tun: Universal TUN/TAP device driver, 1.6
[ 9.020000] sdhci: Secure Digital Host Controller Interface driver
[ 9.030000] sdhci: Copyright(c) Pierre Ossman
[ 9.040000] spi-mt7621 1e000b00.spi: sys_freq: 225000000
[ 9.060000] m25p80 spi0.0: w25q256 (32768 Kbytes)
[ 9.070000] ata1: SATA link down (SStatus 0 SControl 300)
[ 9.080000] 4 fixed-partitions partitions found on MTD device spi0.0
[ 9.090000] Creating 4 MTD partitions on "spi0.0":
[ 9.100000] 0x000000000000-0x000000030000 : "u-boot"
[ 9.120000] 0x000000030000-0x000000040000 : "u-boot-env"
[ 9.140000] 0x000000040000-0x000000050000 : "factory"
[ 9.150000] 0x000000050000-0x000002000000 : "firmware"
[ 9.200000] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 9.210000] ata3.00: ATA-8: Hitachi HDS721010CLA332, JP4OA3EA, max UDMA/133
[ 9.230000] ata3.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 32), AA
[ 9.230000] libphy: mdio: probed
[ 9.240000] ata3.00: configured for UDMA/133
[ 9.280000] mtk_soc_eth 1e100000.ethernet: generated random MAC address 4e:9f:18:be:e2:38
[ 9.310000] mtk_soc_eth 1e100000.ethernet eth0: mediatek frame engine at 0xbe100000, irq 21
[ 9.320000] ata5: SATA link down (SStatus 0 SControl 300)
[ 9.340000] NET: Registered protocol family 10
[ 9.360000] Segment Routing with IPv6
[ 9.370000] NET: Registered protocol family 17
[ 9.380000] 8021q: 802.1Q VLAN Support v1.8
[ 9.390000] Loading compiled-in X.509 certificates
[ 9.400000] ata2: SATA link down (SStatus 0 SControl 300)
[ 9.410000] hctosys: unable to open rtc device (rtc0)
[ 9.410000] scsi 2:0:0:0: Direct-Access ATA Hitachi HDS72101 A3EA PQ: 0 ANSI: 5
[ 9.440000] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 9.460000] mmc0: new high speed SD card at address 0002
[ 9.470000] sd 2:0:0:0: [sda] Write Protect is off
[ 9.470000] mmcblk0: mmc0:0002 00000 1.88 GiB
[ 9.490000] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 9.530000] sda: sda1 sda2 sda3 sda4
[ 9.540000] sd 2:0:0:0: [sda] Attached SCSI disk
[ 9.770000] ata4: SATA link down (SStatus 0 SControl 300)
[ 10.120000] ata6: SATA link down (SStatus 0 SControl 300)
[ 10.150000] Freeing unused kernel memory: 6524K
[ 10.160000] This architecture does not have kernel memory protection.
[ 10.380000] usbcore: registered new interface driver usbfs
[ 10.400000] usbcore: registered new interface driver hub
[ 10.420000] usbcore: registered new device driver usb
[ 10.530000] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
[ 10.540000] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 1
[ 10.570000] xhci-mtk 1e1c0000.xhci: hcc params 0x01401198 hci version 0x96 quirks 0x0000000000210010
[ 10.590000] xhci-mtk 1e1c0000.xhci: irq 20, io mem 0x1e1c0000
[ 10.630000] hub 1-0:1.0: USB hub found
[ 10.640000] hub 1-0:1.0: 2 ports detected
[ 10.660000] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
[ 10.670000] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 2
[ 10.690000] xhci-mtk 1e1c0000.xhci: Host supports USB 3.0 SuperSpeed
[ 10.700000] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 10.740000] hub 2-0:1.0: USB hub found
[ 10.750000] hub 2-0:1.0: 1 port detected
[ 10.810000] usbcore: registered new interface driver usb-storage
[ 11.180000] usb 1-2: new high-speed USB device number 2 using xhci-mtk
[ 11.250000] Waiting disk spinup and searching for partition GNUBEE-ROOT...
[ 11.390000] hub 1-2:1.0: USB hub found
[ 11.420000] hub 1-2:1.0: 4 ports detected
[ 11.660000] mtk_soc_eth 1e100000.ethernet eth0: port 0 link up
[ 14.260000] done.
mdadm: No arrays found in config file or automatically
findfs: unable to resolve 'PARTLABEL=GNUBEE-CRYPT-ROOT'
[ 16.120000] EXT4-fs (mmcblk0): INFO: recovery required on readonly filesystem
[ 16.140000] EXT4-fs (mmcblk0): write access will be enabled during recovery
[ 16.240000] msdc0 -> TUNE_BREAD<PASS> dcrc<0x0> DATRDDLY0/1<0x10101010><0x0> dsmpl<0x0> <- msdc_tune_bread() : L<1342> PID<kworker/1:0H><0x12>
[ 18.260000] random: crng init done
[ 19.810000] EXT4-fs (mmcblk0): recovery complete
[ 19.830000] EXT4-fs (mmcblk0): mounted filesystem with ordered data mode. Opts: (null)
[ 19.860000] Partition GNUBEE-ROOT found. Starting...
[ 21.320000] systemd[1]: System time before build time, advancing clock.
[ 21.490000] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 21.530000] systemd[1]: Detected architecture mips.
Welcome to Debian GNU/Linux 9 (stretch)!
[ 21.590000] systemd[1]: Set hostname to <gnubeaver.brown>.
[ 22.490000] systemd[1]: Listening on udev Control Socket.
[ OK ] Listening on udev Control Socket.
[ 22.560000] systemd[1]: Listening on Syslog Socket.
[ OK ] Listening on Syslog Socket.
[ 22.610000] systemd[1]: Reached target Remote File Systems.
[ OK ] Reached target Remote File Systems.
[ 22.670000] systemd[1]: Listening on fsck to fsckd communication Socket.
[ OK ] Listening on fsck to fsckd communication Socket.
[ 22.720000] systemd[1]: Listening on Journal Socket (/dev/log).
[ OK ] Listening on Journal Socket (/dev/log).
[ 22.770000] systemd[1]: Created slice User and Session Slice.
[ OK ] Created slice User and Session Slice.
[ 22.820000] systemd[1]: Created slice System Slice.
[ OK ] Created slice System Slice.
[ OK ] Created slice system-serial\x2dgetty.slice.
[ OK ] Created slice system-getty.slice.
[ OK ] Reached target Slices.
[ OK ] Reached target Swap.
[ OK ] Listening on udev Kernel Socket.
[ OK ] Started Dispatch Password Requests to Console Directory Watch.
[ OK ] Listening on Journal Socket.
Starting Create list of required st…ce nodes for the current kernel...
Starting Journal Service...
Starting File System Check on Root Device...
Starting Load Kernel Modules...
Mounting Debug File System...
[ OK ] Started Forward Password Requests to Wall Directory Watch.
[ OK ] Reached target Encrypted Volumes.
Starting Set the console keyboard layout...
[ OK ] Reached target Paths.
[ OK ] Listening on /dev/initctl Compatibility Named Pipe.
[ OK ] Mounted Debug File System.
[ OK ] Started Create list of required sta…vice nodes for the current kernel.
[ OK ] Started File System Check on Root Device.
[ OK ] Started Load Kernel Modules.
[ OK ] Started File System Check Daemon to report status.
Starting Apply Kernel Variables...
Starting Remount Root and Kernel File Systems...
Starting Create Static Device Nodes in /dev...
[ OK ] Started Journal Service.
[ OK ] Started Apply Kernel Variables.
[ OK ] Started Set the console keyboard layout.
[ OK ] Started Create Static Device Nodes in /dev.
Starting udev Kernel Device Manager...
[ OK ] Started udev Kernel Device Manager.
[ 24.840000] EXT4-fs (mmcblk0): re-mounted. Opts: errors=remount-ro
[ OK ] Started Remount Root and Kernel File Systems.
Starting Load/Save Random Seed...
Starting Flush Journal to Persistent Storage...
Starting udev Coldplug all Devices...
[ OK ] Reached target Local File Systems (Pre).
[ OK ] Reached target Local File Systems.
Starting Set console font and keymap...
Starting Raise network interfaces...
[ OK ] Started Load/Save Random Seed.
[ OK ] Started Set console font and keymap.
[ 25.550000] systemd-journald[666]: Received request to flush runtime journal from PID 1
[ OK ] Started Flush Journal to Persistent Storage.
Starting Create Volatile Files and Directories...
[ OK ] Started Create Volatile Files and Directories.
Starting Network Time Synchronization...
Starting Update UTMP about System Boot/Shutdown...
[ OK ] Started Update UTMP about System Boot/Shutdown.
[ OK ] Started udev Coldplug all Devices.
[ OK ] Found device /dev/ttyS0.
[ OK ] Started Network Time Synchronization.
[ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
[ OK ] Reached target System Time Synchronized.
[ OK ] Reached target System Initialization.
[ OK ] Listening on D-Bus System Message Bus Socket.
[ OK ] Reached target Sockets.
[ OK ] Reached target Basic System.
Starting LSB: Execute the kexec -e command to reboot system...
[ OK ] Started Regular background program processing daemon.
[ OK ] Started Self Monitoring and Reporting Technology (SMART) Daemon.
[ OK ] Started D-Bus System Message Bus.
[ 27.830000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 27.840000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ OK ] Started Daily Cleanup of Temporary Directories.
Starting LSB: Mount debugfs on /sys/kernel/debug...
Starting Login Service...
[ OK ] Started Daily apt download activities.
[ OK ] Started Daily apt upgrade and clean activities.
[ OK ] Reached target Timers.
Starting System Logging Service...
[ OK ] Started System Logging Service.
[ OK ] Started LSB: Execute the kexec -e command to reboot system.
Starting LSB: Load kernel image with kexec...
[ OK ] Started Login Service.
[ OK ] Started LSB: Mount debugfs on /sys/kernel/debug.
[ OK ] Started LSB: Load kernel image with kexec.
[FAILED] Failed to start Raise network interfaces.
See 'systemctl status networking.service' for details.
[ OK ] Reached target Network.
[ OK ] Started BIND Domain Name Server.
[ OK ] Reached target Host and Network Name Lookups.
Starting The Apache HTTP Server...
Starting OpenBSD Secure Shell server...
[ OK ] Reached target Network is Online.
Starting /etc/rc.local Compatibility...
Starting LSB: DHCP server...
Starting LSB: Advanced IEEE 802.11 management daemon...
Starting LSB: exim Mail Transport Agent...
Starting Permit User Sessions...
[ OK ] Started LSB: Advanced IEEE 802.11 management daemon.
[ OK ] Started Permit User Sessions.
[ OK ] Started OpenBSD Secure Shell server.
[ OK ] Started The Apache HTTP Server.
[FAILED] Failed to start LSB: DHCP server.
See 'systemctl status isc-dhcp-server.service' for details.
[ OK ] Started LSB: exim Mail Transport Agent.
[ 43.880834] rc.local[972]: 6 Aug 10:18:29 ntpdate[975]: step time server 203.23.237.200 offset 184607.643324 sec
Starting Daily apt download activities...
[ OK ] Started /etc/rc.local Compatibility.
[ OK ] Started Serial Getty on ttyS0.
[ OK ] Reached target Login Prompts.
[ OK ] Reached target Multi-User System.
[ OK ] Reached target Graphical Interface.
Starting Update UTMP about System Runlevel Changes...
[ OK ] Started Update UTMP about System Runlevel Changes.
Debian GNU/Linux 9 gnubeaver.brown ttyS0
rooteaver login:
Password:
Last login: Fri Aug 3 14:32:22 AEST 2018 on ttyS0
Linux gnubeaver.brown 4.18.0-rc7+ #279 SMP Mon Aug 6 10:17:08 AEST 2018 mips
The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.
Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
root@gnubeaver:~#
root@gnubeaver:~# lspci
00:00.0 PCI bridge: Device 0e8d:0801 (rev 01)
00:01.0 PCI bridge: Device 0e8d:0801 (rev 01)
00:02.0 PCI bridge: Device 0e8d:0801 (rev 01)
01:00.0 IDE interface: ASMedia Technology Inc. ASM1061 SATA IDE Controller (rev 02)
02:00.0 IDE interface: ASMedia Technology Inc. ASM1061 SATA IDE Controller (rev 02)
03:00.0 IDE interface: ASMedia Technology Inc. ASM1061 SATA IDE Controller (rev 02)
root@gnubeaver:~#
root@gnubeaver:~# cat /proc/partitions
major minor #blocks name
31 0 192 mtdblock0
31 1 64 mtdblock1
31 2 64 mtdblock2
31 3 32448 mtdblock3
179 0 1974272 mmcblk0
8 0 976762584 sda
8 1 194288 sda1
8 2 9765624 sda2
8 3 912261120 sda3
8 4 53558912 sda4
root@gnubeaver:~#
Attachment:
signature.asc
Description: PGP signature
_______________________________________________ devel mailing list devel@xxxxxxxxxxxxxxxxxxxxxx http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
