RALINK_PCI_PCICFG_ADDR and RALINK_PCI_PCIMSK_ADDR are defined to be directly
referenced for read and write. Use pcie_read and pcie_write instead changing
its definition to a simple relative offset to pcie base address.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@xxxxxxxxx>
---
drivers/staging/mt7621-pci/pci-mt7621.c | 54 +++++++++++++++++++++------------
1 file changed, 34 insertions(+), 20 deletions(-)
diff --git a/drivers/staging/mt7621-pci/pci-mt7621.c b/drivers/staging/mt7621-pci/pci-mt7621.c
index 1344291..0d4c07f 100644
--- a/drivers/staging/mt7621-pci/pci-mt7621.c
+++ b/drivers/staging/mt7621-pci/pci-mt7621.c
@@ -74,8 +74,8 @@
#define RALINK_PCIE1_RST (1<<25)
#define RALINK_PCIE2_RST (1<<26)
-#define RALINK_PCI_PCICFG_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x0000)
-#define RALINK_PCI_PCIMSK_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x000C)
+#define RALINK_PCI_PCICFG_ADDR 0x0000
+#define RALINK_PCI_PCIMSK_ADDR 0x000C
#define RALINK_PCI_BASE 0xBE140000
#define RT6855_PCIE0_OFFSET 0x2000
@@ -564,7 +564,9 @@ static int mt7621_pci_probe(struct platform_device *pdev)
pcie_link_status &= ~(1<<0);
} else {
pcie_link_status |= 1<<0;
- RALINK_PCI_PCIMSK_ADDR |= (1<<20); // enable pcie1 interrupt
+ val = pcie_read(pcie, RALINK_PCI_PCIMSK_ADDR);
+ val |= (1<<20); // enable pcie1 interrupt
+ pcie_write(pcie, val, RALINK_PCI_PCIMSK_ADDR);
}
if ((pcie_read(pcie, RT6855_PCIE1_OFFSET + RALINK_PCI_STATUS) & 0x1) == 0) {
@@ -574,7 +576,9 @@ static int mt7621_pci_probe(struct platform_device *pdev)
pcie_link_status &= ~(1<<1);
} else {
pcie_link_status |= 1<<1;
- RALINK_PCI_PCIMSK_ADDR |= (1<<21); // enable pcie1 interrupt
+ val = pcie_read(pcie, RALINK_PCI_PCIMSK_ADDR);
+ val |= (1<<21); // enable pcie1 interrupt
+ pcie_write(pcie, val, RALINK_PCI_PCIMSK_ADDR);
}
if ((pcie_read(pcie, RT6855_PCIE2_OFFSET + RALINK_PCI_STATUS) & 0x1) == 0) {
@@ -584,7 +588,9 @@ static int mt7621_pci_probe(struct platform_device *pdev)
pcie_link_status &= ~(1<<2);
} else {
pcie_link_status |= 1<<2;
- RALINK_PCI_PCIMSK_ADDR |= (1<<22); // enable pcie2 interrupt
+ val = pcie_read(pcie, RALINK_PCI_PCIMSK_ADDR);
+ val |= (1<<22); // enable pcie2 interrupt
+ pcie_write(pcie, val, RALINK_PCI_PCIMSK_ADDR);
}
if (pcie_link_status == 0)
@@ -603,27 +609,35 @@ pcie(2/1/0) link status pcie2_num pcie1_num pcie0_num
*/
switch (pcie_link_status) {
case 2:
- RALINK_PCI_PCICFG_ADDR &= ~0x00ff0000;
- RALINK_PCI_PCICFG_ADDR |= 0x1 << 16; //port0
- RALINK_PCI_PCICFG_ADDR |= 0x0 << 20; //port1
+ val = pcie_read(pcie, RALINK_PCI_PCICFG_ADDR);
+ val &= ~0x00ff0000;
+ val |= 0x1 << 16; // port 0
+ val |= 0x0 << 20; // port 1
+ pcie_write(pcie, val, RALINK_PCI_PCICFG_ADDR);
break;
case 4:
- RALINK_PCI_PCICFG_ADDR &= ~0x0fff0000;
- RALINK_PCI_PCICFG_ADDR |= 0x1 << 16; //port0
- RALINK_PCI_PCICFG_ADDR |= 0x2 << 20; //port1
- RALINK_PCI_PCICFG_ADDR |= 0x0 << 24; //port2
+ val = pcie_read(pcie, RALINK_PCI_PCICFG_ADDR);
+ val &= ~0x0fff0000;
+ val |= 0x1 << 16; //port0
+ val |= 0x2 << 20; //port1
+ val |= 0x0 << 24; //port2
+ pcie_write(pcie, val, RALINK_PCI_PCICFG_ADDR);
break;
case 5:
- RALINK_PCI_PCICFG_ADDR &= ~0x0fff0000;
- RALINK_PCI_PCICFG_ADDR |= 0x0 << 16; //port0
- RALINK_PCI_PCICFG_ADDR |= 0x2 << 20; //port1
- RALINK_PCI_PCICFG_ADDR |= 0x1 << 24; //port2
+ val = pcie_read(pcie, RALINK_PCI_PCICFG_ADDR);
+ val &= ~0x0fff0000;
+ val |= 0x0 << 16; //port0
+ val |= 0x2 << 20; //port1
+ val |= 0x1 << 24; //port2
+ pcie_write(pcie, val, RALINK_PCI_PCICFG_ADDR);
break;
case 6:
- RALINK_PCI_PCICFG_ADDR &= ~0x0fff0000;
- RALINK_PCI_PCICFG_ADDR |= 0x2 << 16; //port0
- RALINK_PCI_PCICFG_ADDR |= 0x0 << 20; //port1
- RALINK_PCI_PCICFG_ADDR |= 0x1 << 24; //port2
+ val = pcie_read(pcie, RALINK_PCI_PCICFG_ADDR);
+ val &= ~0x0fff0000;
+ val |= 0x2 << 16; //port0
+ val |= 0x0 << 20; //port1
+ val |= 0x1 << 24; //port2
+ pcie_write(pcie, val, RALINK_PCI_PCICFG_ADDR);
break;
}
--
2.7.4
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
