write_config function is always called with bus and func
being 0. Avoid those params and just use 0 inside the
function. Review parameter types changing for more proper
ones.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@xxxxxxxxx>
---
drivers/staging/mt7621-pci/pci-mt7621.c | 20 +++++++++-----------
1 file changed, 9 insertions(+), 11 deletions(-)
diff --git a/drivers/staging/mt7621-pci/pci-mt7621.c b/drivers/staging/mt7621-pci/pci-mt7621.c
index 927e707..ccfbf06 100644
--- a/drivers/staging/mt7621-pci/pci-mt7621.c
+++ b/drivers/staging/mt7621-pci/pci-mt7621.c
@@ -251,11 +251,9 @@ read_config(struct mt7621_pcie *pcie, unsigned int dev, u32 reg)
}
static void
-write_config(struct mt7621_pcie *pcie,
- unsigned long bus, unsigned long dev,
- unsigned long func, unsigned long reg, unsigned long val)
+write_config(struct mt7621_pcie *pcie, unsigned int dev, u32 reg, u32 val)
{
- u32 address = mt7621_pci_get_cfgaddr(bus, dev, func, reg);
+ u32 address = mt7621_pci_get_cfgaddr(0, dev, 0, reg);
pcie_write(pcie, address, RALINK_PCI_CONFIG_ADDR);
pcie_write(pcie, val, RALINK_PCI_CONFIG_DATA_VIRTUAL_REG);
@@ -270,7 +268,7 @@ pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
int irq;
if (dev->bus->number == 0) {
- write_config(pcie, 0, slot, 0, PCI_BASE_ADDRESS_0, MEMORY_BASE);
+ write_config(pcie, slot, PCI_BASE_ADDRESS_0, MEMORY_BASE);
val = read_config(pcie, slot, PCI_BASE_ADDRESS_0);
printk("BAR0 at slot %d = %x\n", slot, val);
}
@@ -706,27 +704,27 @@ pcie(2/1/0) link status pcie2_num pcie1_num pcie0_num
switch (pcie_link_status) {
case 7:
val = read_config(pcie, 2, 0x4);
- write_config(pcie, 0, 2, 0, 0x4, val|0x4);
+ write_config(pcie, 2, 0x4, val|0x4);
val = read_config(pcie, 2, 0x70c);
val &= ~(0xff)<<8;
val |= 0x50<<8;
- write_config(pcie, 0, 2, 0, 0x70c, val);
+ write_config(pcie, 2, 0x70c, val);
case 3:
case 5:
case 6:
val = read_config(pcie, 1, 0x4);
- write_config(pcie, 0, 1, 0, 0x4, val|0x4);
+ write_config(pcie, 1, 0x4, val|0x4);
val = read_config(pcie, 1, 0x70c);
val &= ~(0xff)<<8;
val |= 0x50<<8;
- write_config(pcie, 0, 1, 0, 0x70c, val);
+ write_config(pcie, 1, 0x70c, val);
default:
val = read_config(pcie, 0, 0x4);
- write_config(pcie, 0, 0, 0, 0x4, val|0x4); //bus master enable
+ write_config(pcie, 0, 0x4, val|0x4); //bus master enable
val = read_config(pcie, 0, 0x70c);
val &= ~(0xff)<<8;
val |= 0x50<<8;
- write_config(pcie, 0, 0, 0, 0x70c, val);
+ write_config(pcie, 0, 0x70c, val);
}
err = mt7621_pci_parse_request_of_pci_ranges(pcie);
--
2.7.4
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
