[PATCH v4 2/2] Staging: octeon-usb: Changes macro CVMX_WAIT_FOR_FIELD32 to function call.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Replacing CVMX_WAIT_FOR_FIELD32 macro with equivalent function.

Signed-off-by: Georgios Tsotsos <tsotsos@xxxxxxxxx>
---
v2: Changed CVMX_WAIT_FOR_FIELD32 syntax to avoid checkpatch check notice and
tried to make the macro more readable.
v3: Changed CVMX_WAIT_FOR_FIELD32 macro to function according as refereed in 
commit message and suggested by Greg Kroah-Hartman
v4: Added patch version text

 drivers/staging/octeon-usb/octeon-hcd.c | 65 +++++++++++++++++++--------------
 1 file changed, 38 insertions(+), 27 deletions(-)

diff --git a/drivers/staging/octeon-usb/octeon-hcd.c b/drivers/staging/octeon-usb/octeon-hcd.c
index 4615133292b5..8a7bdf1a9fe6 100644
--- a/drivers/staging/octeon-usb/octeon-hcd.c
+++ b/drivers/staging/octeon-usb/octeon-hcd.c
@@ -377,29 +377,6 @@ struct octeon_hcd {
 	struct cvmx_usb_tx_fifo nonperiodic;
 };
 
-/* This macro spins on a register waiting for it to reach a condition. */
-#define CVMX_WAIT_FOR_FIELD32(address, _union, cond, timeout_usec)	    \
-	({int result;							    \
-	do {								    \
-		u64 done = cvmx_get_cycle() + (u64)timeout_usec *	    \
-			   octeon_get_clock_rate() / 1000000;		    \
-		union _union c;						    \
-									    \
-		while (1) {						    \
-			c.u32 = cvmx_usb_read_csr32(usb, address);	    \
-									    \
-			if (cond) {					    \
-				result = 0;				    \
-				break;					    \
-			} else if (cvmx_get_cycle() > done) {		    \
-				result = -1;				    \
-				break;					    \
-			} else						    \
-				__delay(100);				    \
-		}							    \
-	} while (0);							    \
-	result; })
-
 /*
  * This macro logically sets a single field in a CSR. It does the sequence
  * read, modify, and write
@@ -593,6 +570,42 @@ static inline int cvmx_usb_get_data_pid(struct cvmx_usb_pipe *pipe)
 	return 0; /* Data0 */
 }
 
+/**
+ * Loop through register until txfflsh or rxfflsh become zero.
+ *
+ * @usb:           USB block
+ * @address:       64bit address to read
+ * @timeout_usec:  Timeout
+ * @fflsh_type:    Indicates fflsh type, 0 for txfflsh, 1 for rxfflsh
+ *
+ */
+static int cvmx_wait_for_field32(struct octeon_hcd *usb, u64 address,
+				 u64 timeout_usec, int fflsh_type)
+{
+	int result;
+	u64 done = cvmx_get_cycle() + timeout_usec *
+		   (u64)octeon_get_clock_rate / 1000000;
+
+	union cvmx_usbcx_grstctl c;
+
+	while (1) {
+		c.u32 = cvmx_usb_read_csr32(usb, address);
+		if (fflsh_type == 0 && c.s.txfflsh == 0) {
+			result = 0;
+			break;
+		} else if (fflsh_type == 1 && c.s.rxfflsh == 0) {
+			result = 0;
+			break;
+		} else if (cvmx_get_cycle() > done) {
+			result = -1;
+			break;
+		}
+
+		__delay(100);
+	}
+	return result;
+}
+
 static void cvmx_fifo_setup(struct octeon_hcd *usb)
 {
 	union cvmx_usbcx_ghwcfg3 usbcx_ghwcfg3;
@@ -635,11 +648,9 @@ static void cvmx_fifo_setup(struct octeon_hcd *usb)
 	/* Flush all FIFOs */
 	USB_SET_FIELD32(address, cvmx_usbcx_grstctl, txfnum, 0x10);
 	USB_SET_FIELD32(address, cvmx_usbcx_grstctl, txfflsh, 1);
-	CVMX_WAIT_FOR_FIELD32(address, cvmx_usbcx_grstctl,
-			      c.s.txfflsh == 0, 100);
+	cvmx_wait_for_field32(usb, address, 0, 100);
 	USB_SET_FIELD32(address, cvmx_usbcx_grstctl, rxfflsh, 1);
-	CVMX_WAIT_FOR_FIELD32(address, cvmx_usbcx_grstctl,
-			      c.s.rxfflsh == 0, 100);
+	cvmx_wait_for_field32(usb, address, 1, 100);
 }
 
 /**
-- 
2.16.4
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel



[Index of Archives]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux