Hi Roy,
Couple of comments inline.
On 05.07.2018 22:41, Roy Pledge wrote:
> Move the NXP DPIO (Datapath I/O Driver) out of the
> drivers/staging directory and into the drivers/soc/fsl directory.
>
> The DPIO driver enables access to Queue and Buffer Manager (QBMAN)
> hardware on NXP DPAA2 devices. This is a prerequisite to moving the
> DPAA2 Ethernet driver out of staging.
>
> Signed-off-by: Roy Pledge <roy.pledge@xxxxxxx>
> ---
> MAINTAINERS | 2 +-
> drivers/crypto/caam/sg_sw_qm2.h | 2 +-
> drivers/crypto/caam/sg_sw_sec4.h | 2 +-
> drivers/soc/fsl/Kconfig | 10 ++++++++++
> drivers/soc/fsl/Makefile | 1 +
> drivers/{staging/fsl-mc/bus => soc/fsl}/dpio/Makefile | 0
> drivers/{staging/fsl-mc/bus => soc/fsl}/dpio/dpio-cmd.h | 0
> drivers/{staging/fsl-mc/bus => soc/fsl}/dpio/dpio-driver.c | 2 +-
> drivers/{staging/fsl-mc/bus => soc/fsl}/dpio/dpio-driver.txt | 0
Maybe this should be converted to .rst and go in the already existing
Documentation/networking/dpaa2/?
> drivers/{staging/fsl-mc/bus => soc/fsl}/dpio/dpio-service.c | 2 +-
> drivers/{staging/fsl-mc/bus => soc/fsl}/dpio/dpio.c | 0
> drivers/{staging/fsl-mc/bus => soc/fsl}/dpio/dpio.h | 0
> drivers/{staging/fsl-mc/bus => soc/fsl}/dpio/qbman-portal.c | 2 +-
> drivers/{staging/fsl-mc/bus => soc/fsl}/dpio/qbman-portal.h | 2 +-
> drivers/staging/fsl-dpaa2/ethernet/dpaa2-eth.h | 4 ++--
> drivers/staging/fsl-mc/bus/Kconfig | 9 ---------
> drivers/staging/fsl-mc/bus/Makefile | 2 --
> {drivers/staging/fsl-mc/include => include/soc/fsl}/dpaa2-fd.h | 0
> .../staging/fsl-mc/include => include/soc/fsl}/dpaa2-global.h | 0
> {drivers/staging/fsl-mc/include => include/soc/fsl}/dpaa2-io.h | 0
> 20 files changed, 20 insertions(+), 20 deletions(-)
> rename drivers/{staging/fsl-mc/bus => soc/fsl}/dpio/Makefile (100%)
> rename drivers/{staging/fsl-mc/bus => soc/fsl}/dpio/dpio-cmd.h (100%)
> rename drivers/{staging/fsl-mc/bus => soc/fsl}/dpio/dpio-driver.c (99%)
> rename drivers/{staging/fsl-mc/bus => soc/fsl}/dpio/dpio-driver.txt (100%)
> rename drivers/{staging/fsl-mc/bus => soc/fsl}/dpio/dpio-service.c (99%)
> rename drivers/{staging/fsl-mc/bus => soc/fsl}/dpio/dpio.c (100%)
> rename drivers/{staging/fsl-mc/bus => soc/fsl}/dpio/dpio.h (100%)
> rename drivers/{staging/fsl-mc/bus => soc/fsl}/dpio/qbman-portal.c (99%)
> rename drivers/{staging/fsl-mc/bus => soc/fsl}/dpio/qbman-portal.h (99%)
> rename {drivers/staging/fsl-mc/include => include/soc/fsl}/dpaa2-fd.h (100%)
> rename {drivers/staging/fsl-mc/include => include/soc/fsl}/dpaa2-global.h (100%)
> rename {drivers/staging/fsl-mc/include => include/soc/fsl}/dpaa2-io.h (100%)
I received feedback in the past on mc-bus that a driver should limit to
only one public header and one private one. Would it make sense to do
the same for dpio too?
---
Best Regards, Laurentiu
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
