This chip support high level and low level interrupts. Those have to be implemented also to get a complete and clean driver. Signed-off-by: Sergio Paracuellos <sergio.paracuellos@xxxxxxxxx> --- drivers/staging/mt7621-gpio/gpio-mt7621.c | 51 +++++++++++++++++++++++-------- 1 file changed, 38 insertions(+), 13 deletions(-) diff --git a/drivers/staging/mt7621-gpio/gpio-mt7621.c b/drivers/staging/mt7621-gpio/gpio-mt7621.c index 54c18c1..39874cb 100644 --- a/drivers/staging/mt7621-gpio/gpio-mt7621.c +++ b/drivers/staging/mt7621-gpio/gpio-mt7621.c @@ -38,6 +38,8 @@ * @bank: gpio bank number for the chip * @rising: mask for rising irqs * @falling: mask for falling irqs + * @hlevel: mask for high level irqs + * @llevel: mask for low level irqs */ struct mtk_gc { struct gpio_chip chip; @@ -45,6 +47,8 @@ struct mtk_gc { int bank; u32 rising; u32 falling; + u32 hlevel; + u32 llevel; }; /** @@ -184,7 +188,7 @@ mediatek_gpio_irq_unmask(struct irq_data *d) int bank = pin / MTK_BANK_WIDTH; struct mtk_gc *rg = &gpio_data->gc_map[bank]; unsigned long flags; - u32 rise, fall; + u32 rise, fall, high, low; if (!rg) return; @@ -192,8 +196,12 @@ mediatek_gpio_irq_unmask(struct irq_data *d) spin_lock_irqsave(&rg->lock, flags); rise = mtk_gpio_r32(rg, GPIO_REG_REDGE); fall = mtk_gpio_r32(rg, GPIO_REG_FEDGE); + high = mtk_gpio_r32(rg, GPIO_REG_HLVL); + low = mtk_gpio_r32(rg, GPIO_REG_LLVL); mtk_gpio_w32(rg, GPIO_REG_REDGE, rise | (PIN_MASK(pin) & rg->rising)); mtk_gpio_w32(rg, GPIO_REG_FEDGE, fall | (PIN_MASK(pin) & rg->falling)); + mtk_gpio_w32(rg, GPIO_REG_HLVL, high | (PIN_MASK(pin) & rg->hlevel)); + mtk_gpio_w32(rg, GPIO_REG_LLVL, low | (PIN_MASK(pin) & rg->llevel)); spin_unlock_irqrestore(&rg->lock, flags); } @@ -205,7 +213,7 @@ mediatek_gpio_irq_mask(struct irq_data *d) int bank = pin / MTK_BANK_WIDTH; struct mtk_gc *rg = &gpio_data->gc_map[bank]; unsigned long flags; - u32 rise, fall; + u32 rise, fall, high, low; if (!rg) return; @@ -213,8 +221,12 @@ mediatek_gpio_irq_mask(struct irq_data *d) spin_lock_irqsave(&rg->lock, flags); rise = mtk_gpio_r32(rg, GPIO_REG_REDGE); fall = mtk_gpio_r32(rg, GPIO_REG_FEDGE); + high = mtk_gpio_r32(rg, GPIO_REG_HLVL); + low = mtk_gpio_r32(rg, GPIO_REG_LLVL); mtk_gpio_w32(rg, GPIO_REG_FEDGE, fall & ~PIN_MASK(pin)); mtk_gpio_w32(rg, GPIO_REG_REDGE, rise & ~PIN_MASK(pin)); + mtk_gpio_w32(rg, GPIO_REG_HLVL, high & ~PIN_MASK(pin)); + mtk_gpio_w32(rg, GPIO_REG_LLVL, low & ~PIN_MASK(pin)); spin_unlock_irqrestore(&rg->lock, flags); } @@ -231,21 +243,34 @@ mediatek_gpio_irq_type(struct irq_data *d, unsigned int type) return -1; if (type == IRQ_TYPE_PROBE) { - if ((rg->rising | rg->falling) & mask) + if ((rg->rising | rg->falling | + rg->hlevel | rg->llevel) & mask) return 0; - type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING; + type = (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING | + IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW); } - if (type & IRQ_TYPE_EDGE_RISING) - rg->rising |= mask; - else - rg->rising &= ~mask; - - if (type & IRQ_TYPE_EDGE_FALLING) - rg->falling |= mask; - else - rg->falling &= ~mask; + if (type & IRQ_TYPE_EDGE_RISING || + type & IRQ_TYPE_EDGE_FALLING) { + if (type & IRQ_TYPE_EDGE_RISING) + rg->rising |= mask; + else + rg->rising &= ~mask; + + if (type & IRQ_TYPE_EDGE_FALLING) + rg->falling |= mask; + else + rg->falling &= ~mask; + } else { + if (type & IRQ_TYPE_LEVEL_HIGH) { + rg->hlevel |= mask; + rg->llevel &= ~mask; + } else { + rg->llevel |= mask; + rg->hlevel &= ~mask; + } + } return 0; } -- 2.7.4 _______________________________________________ devel mailing list devel@xxxxxxxxxxxxxxxxxxxxxx http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel