On Tue, 29 May 2018 21:11:43 +0200
Thibaut Robert <thibaut.robert@xxxxxxxxx> wrote:
> This commit fix a few sparse warnings. It mostly consists of fixing
> the type declarations and avoiding the use of variables with mixed
> endianness values.
>
> Signed-off-by: Thibaut Robert <thibaut.robert@xxxxxxxxx>
> ---
> drivers/staging/wilc1000/wilc_spi.c | 15 ++++++-----
> .../staging/wilc1000/wilc_wfi_cfgoperations.c | 2 +-
> drivers/staging/wilc1000/wilc_wlan.c | 26
> +++++++++---------- drivers/staging/wilc1000/wilc_wlan_cfg.c |
> 8 +++--- drivers/staging/wilc1000/wilc_wlan_cfg.h | 4 +--
> 5 files changed, 27 insertions(+), 28 deletions(-)
>
> diff --git a/drivers/staging/wilc1000/wilc_spi.c
> b/drivers/staging/wilc1000/wilc_spi.c index
> 647526387784..e51f0d91a376 100644 ---
> a/drivers/staging/wilc1000/wilc_spi.c +++
> b/drivers/staging/wilc1000/wilc_spi.c @@ -666,11 +666,11 @@ static
> int spi_data_write(struct wilc *wilc, u8 *b, u32 sz) static int
> spi_internal_write(struct wilc *wilc, u32 adr, u32 dat) {
> struct spi_device *spi = to_spi_device(wilc->dev);
> + __le32 le32dat = cpu_to_le32(dat);
> int result;
>
> - dat = cpu_to_le32(dat);
> - result = spi_cmd_complete(wilc, CMD_INTERNAL_WRITE, adr, (u8
> *)&dat, 4,
> - 0);
> + result = spi_cmd_complete(wilc, CMD_INTERNAL_WRITE, adr, (u8
> *)&le32dat,
> + 4, 0);
> if (result != N_OK)
> dev_err(&spi->dev, "Failed internal write cmd...\n");
>
> @@ -689,7 +689,7 @@ static int spi_internal_read(struct wilc *wilc,
> u32 adr, u32 *data) return 0;
> }
>
> - *data = cpu_to_le32(*data);
> + le32_to_cpus(data);
>
> return 1;
> }
> @@ -706,15 +706,16 @@ static int wilc_spi_write_reg(struct wilc
> *wilc, u32 addr, u32 data) int result = N_OK;
> u8 cmd = CMD_SINGLE_WRITE;
> u8 clockless = 0;
> + __le32 le32data = cpu_to_le32(data);
>
> - data = cpu_to_le32(data);
> if (addr < 0x30) {
> /* Clockless register */
> cmd = CMD_INTERNAL_WRITE;
> clockless = 1;
> }
>
> - result = spi_cmd_complete(wilc, cmd, addr, (u8 *)&data, 4,
> clockless);
> + result = spi_cmd_complete(wilc, cmd, addr, (u8 *)&le32data,
> 4,
> + clockless);
> if (result != N_OK)
> dev_err(&spi->dev, "Failed cmd, write reg
> (%08x)...\n", addr);
> @@ -769,7 +770,7 @@ static int wilc_spi_read_reg(struct wilc *wilc,
> u32 addr, u32 *data) return 0;
> }
>
> - *data = cpu_to_le32(*data);
> + le32_to_cpus(data);
>
> return 1;
> }
> diff --git a/drivers/staging/wilc1000/wilc_wfi_cfgoperations.c
> b/drivers/staging/wilc1000/wilc_wfi_cfgoperations.c index
> e248702ee519..745bf5ca2622 100644 ---
> a/drivers/staging/wilc1000/wilc_wfi_cfgoperations.c +++
> b/drivers/staging/wilc1000/wilc_wfi_cfgoperations.c @@ -1431,7
> +1431,7 @@ void wilc_wfi_p2p_rx(struct net_device *dev, u8 *buff, u32
> size) freq = ieee80211_channel_to_frequency(curr_channel,
> NL80211_BAND_2GHZ);
> - if (!ieee80211_is_action(buff[FRAME_TYPE_ID])) {
> + if (!ieee80211_is_action(cpu_to_le16(buff[FRAME_TYPE_ID]))) {
> cfg80211_rx_mgmt(priv->wdev, freq, 0, buff, size, 0);
> return;
> }
> diff --git a/drivers/staging/wilc1000/wilc_wlan.c
> b/drivers/staging/wilc1000/wilc_wlan.c index
> 28c93f3f846e..a5ac1d26590b 100644 ---
> a/drivers/staging/wilc1000/wilc_wlan.c +++
> b/drivers/staging/wilc1000/wilc_wlan.c @@ -560,7 +560,8 @@ int
> wilc_wlan_handle_txq(struct net_device *dev, u32 *txq_count) int ret
> = 0; int counter;
> int timeout;
> - u32 vmm_table[WILC_VMM_TBL_SIZE];
> + __le32 vmm_table[WILC_VMM_TBL_SIZE];
> + u32 table_entry;
> struct wilc_vif *vif;
> struct wilc *wilc;
> const struct wilc_hif_func *func;
> @@ -598,10 +599,10 @@ int wilc_wlan_handle_txq(struct net_device
> *dev, u32 *txq_count) if ((sum + vmm_sz) > LINUX_TX_SIZE)
> break;
>
> - vmm_table[i] = vmm_sz / 4;
> + table_entry = vmm_sz / 4;
> if (tqe->type == WILC_CFG_PKT)
> - vmm_table[i] |= BIT(10);
> - vmm_table[i] = cpu_to_le32(vmm_table[i]);
> + table_entry |= BIT(10);
> + vmm_table[i] = cpu_to_le32(table_entry);
>
> i++;
> sum += vmm_sz;
> @@ -704,8 +705,7 @@ int wilc_wlan_handle_txq(struct net_device *dev,
> u32 *txq_count) if (vmm_table[i] == 0)
> break;
>
> - vmm_table[i] = cpu_to_le32(vmm_table[i]);
> - vmm_sz = (vmm_table[i] & 0x3ff);
> + vmm_sz = (le32_to_cpu(vmm_table[i]) & 0x3ff);
> vmm_sz *= 4;
> header = (tqe->type << 31) |
> (tqe->buffer_size << 15) |
> @@ -715,8 +715,7 @@ int wilc_wlan_handle_txq(struct net_device *dev,
> u32 *txq_count) else
> header &= ~BIT(30);
>
> - header = cpu_to_le32(header);
> - memcpy(&txb[offset], &header, 4);
> + *((__le32 *)&txb[offset]) = cpu_to_le32(header);
> if (tqe->type == WILC_CFG_PKT) {
> buffer_offset = ETH_CONFIG_PKT_HDR_OFFSET;
> } else if (tqe->type == WILC_NET_PKT) {
> @@ -770,8 +769,7 @@ static void wilc_wlan_handle_rx_buff(struct wilc
> *wilc, u8 *buffer, int size)
> do {
> buff_ptr = buffer + offset;
> - memcpy(&header, buff_ptr, 4);
> - header = cpu_to_le32(header);
> + header = le32_to_cpup((__le32 *)buff_ptr);
>
> is_cfg_packet = (header >> 31) & 0x1;
> pkt_offset = (header >> 22) & 0x1ff;
> @@ -942,6 +940,7 @@ int wilc_wlan_firmware_download(struct wilc
> *wilc, const u8 *buffer, u32 offset;
> u32 addr, size, size2, blksz;
> u8 *dma_buffer;
> + const __le32 *header;
> int ret = 0;
>
> blksz = BIT(12);
> @@ -952,10 +951,9 @@ int wilc_wlan_firmware_download(struct wilc
> *wilc, const u8 *buffer,
> offset = 0;
> do {
> - memcpy(&addr, &buffer[offset], 4);
> - memcpy(&size, &buffer[offset + 4], 4);
> - addr = cpu_to_le32(addr);
> - size = cpu_to_le32(size);
> + header = (__le32 *)buffer + offset;
In addition to Dan's comments, I have one more observation.
The above line has a crash(Oops), while downloading the firmware to
WILC1000 module i.e "header = (__le32 *)buffer + offset;".
The crash can be fixes by putting extra bracket like
header = (__le32 *)(buffer + offset);
But I suggest to avoid use of 'header' variable and only change the
below 2 lines.
addr = cpu_to_le32(addr);
size = cpu_to_le32(size);
to
le32_to_cpus(addr);
le32_to_cpus(size);
> + addr = le32_to_cpu(header[0]);
> + size = le32_to_cpu(header[1]);
> acquire_bus(wilc, ACQUIRE_ONLY);
> offset += 8;
> while (((int)size) && (offset < buffer_size)) {
> diff --git a/drivers/staging/wilc1000/wilc_wlan_cfg.c
> b/drivers/staging/wilc1000/wilc_wlan_cfg.c index
> c0b9b700f4d7..4a914d8572aa 100644 ---
> a/drivers/staging/wilc1000/wilc_wlan_cfg.c +++
> b/drivers/staging/wilc1000/wilc_wlan_cfg.c @@ -275,14 +275,14 @@
> static int wilc_wlan_cfg_set_bin(u8 *frame, u32 offset, u16 id, u8
> *b, u32 size) static void wilc_wlan_parse_response_frame(u8 *info,
> int size) {
> - u32 wid, len = 0, i = 0;
> + u32 wid;
> + int len = 0, i = 0;
>
> while (size > 0) {
> i = 0;
> - wid = info[0] | (info[1] << 8);
> - wid = cpu_to_le32(wid);
> + wid = le16_to_cpup((__le16 *)info);
>
> - switch ((wid >> 12) & 0x7) {
> + switch (info[1] >> 4) {
> case WID_CHAR:
> do {
> if (g_cfg_byte[i].id == WID_NIL)
> diff --git a/drivers/staging/wilc1000/wilc_wlan_cfg.h
> b/drivers/staging/wilc1000/wilc_wlan_cfg.h index
> 08092a551840..9e029338bcab 100644 ---
> a/drivers/staging/wilc1000/wilc_wlan_cfg.h +++
> b/drivers/staging/wilc1000/wilc_wlan_cfg.h @@ -18,12 +18,12 @@ struct
> wilc_cfg_byte {
> struct wilc_cfg_hword {
> u16 id;
> - u16 val;
> + __le16 val;
> };
>
> struct wilc_cfg_word {
> u32 id;
> - u32 val;
> + __le32 val;
> };
>
> struct wilc_cfg_str {
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
