[PATCH v3 6/7] staging: rtl8192e: Remove blank space before or after '(' & ')' - style.

[John Whitmore <johnfwhitmore@xxxxxxxxx>]

Corrected coding style issues:
ERROR: space prohibited before that close parenthesis ')'
ERROR: space prohibited after that open parenthesis '('

Signed-off-by: John Whitmore <johnfwhitmore@xxxxxxxxx>
---
 drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

diff --git a/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c b/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c
index 275fadb6f365..cde149af4937 100644
--- a/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c
+++ b/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c
@@ -122,7 +122,7 @@ void HTUpdateDefaultSetting(struct ieee80211_device *ieee)
  *  return:  none
  *  notice:  Driver should not print out this message by default.
  * *****************************************************************************************************************/
-void HTDebugHTCapability(u8 *CapIE, u8 *TitleString )
+void HTDebugHTCapability(u8 *CapIE, u8 *TitleString)
 {
 
 	static u8	EWC11NHTCap[] = {0x00, 0x90, 0x4c, 0x33};	// For 11n EWC definition, 2007.07.17, by Emily
@@ -135,7 +135,7 @@ void HTDebugHTCapability(u8 *CapIE, u8 *TitleString )
 	} else {
 		pCapELE = (PHT_CAPABILITY_ELE)(&CapIE[0]);
 	}
-	IEEE80211_DEBUG(IEEE80211_DL_HT, "<Log HT Capability>. Called by %s\n", TitleString );
+	IEEE80211_DEBUG(IEEE80211_DL_HT, "<Log HT Capability>. Called by %s\n", TitleString);
 
 	IEEE80211_DEBUG(IEEE80211_DL_HT,  "\tSupported Channel Width = %s\n", (pCapELE->ChlWidth)?"20MHz" : "20/40MHz");
 	IEEE80211_DEBUG(IEEE80211_DL_HT,  "\tSupport Short GI for 20M = %s\n", (pCapELE->ShortGI20Mhz)?"YES" : "NO");
@@ -306,17 +306,17 @@ u16  TxCountToDataRate(struct ieee80211_device *ieee, u8 nDataRate)
 			isShortGI = 0;
 
 		      // nDataRate = nDataRate - 12;
-		} else if (nDataRate >= 0x20  && nDataRate <= 0x2f ) {  //(27, 44)
+		} else if (nDataRate >= 0x20  && nDataRate <= 0x2f) {  //(27, 44)
 			is40MHz = 1;
 			isShortGI = 0;
 
 			//nDataRate = nDataRate - 28;
-		} else if (nDataRate >= 0x30  && nDataRate <= 0x3f ) {  //(43, 60)
+		} else if (nDataRate >= 0x30  && nDataRate <= 0x3f) {  //(43, 60)
 			is40MHz = 0;
 			isShortGI = 1;
 
 			//nDataRate = nDataRate - 44;
-		} else if (nDataRate >= 0x40  && nDataRate <= 0x4f ) {  //(59, 76)
+		} else if (nDataRate >= 0x40  && nDataRate <= 0x4f) {  //(59, 76)
 			is40MHz = 1;
 			isShortGI = 1;
 
@@ -371,7 +371,7 @@ static void HTIOTPeerDetermine(struct ieee80211_device *ieee)
 	else if ((memcmp(net->bssid, UNKNOWN_BORADCOM, 3) == 0) ||
 		 (memcmp(net->bssid, LINKSYSWRT330_LINKSYSWRT300_BROADCOM, 3) == 0) ||
 		 (memcmp(net->bssid, LINKSYSWRT350_LINKSYSWRT150_BROADCOM, 3) == 0) ||
-		 (memcmp(net->bssid, NETGEAR834Bv2_BROADCOM, 3) == 0) )
+		 (memcmp(net->bssid, NETGEAR834Bv2_BROADCOM, 3) == 0))
 		pHTInfo->IOTPeer = HT_IOT_PEER_BROADCOM;
 	else if ((memcmp(net->bssid, BELKINF5D8233V1_RALINK, 3) == 0) ||
 		 (memcmp(net->bssid, BELKINF5D82334V3_RALINK, 3) == 0) ||
@@ -641,7 +641,7 @@ void HTConstructInfoElement(struct ieee80211_device *ieee, u8 *posHTInfo, u8 *le
 	}
 
 	memset(posHTInfo, 0, *len);
-	if ( (ieee->iw_mode == IW_MODE_ADHOC) || (ieee->iw_mode == IW_MODE_MASTER)) { //ap mode is not currently supported
+	if ((ieee->iw_mode == IW_MODE_ADHOC) || (ieee->iw_mode == IW_MODE_MASTER)) { //ap mode is not currently supported
 		pHTInfoEle->ControlChl			= ieee->current_network.channel;
 		pHTInfoEle->ExtChlOffset			= ((!pHT->bRegBW40MHz) ? HT_EXTCHNL_OFFSET_NO_EXT :
 											(ieee->current_network.channel <= 6) ?
@@ -867,7 +867,7 @@ static u8 HTFilterMCSRate(struct ieee80211_device *ieee, u8 *pSupportMCS,
 	u8 i = 0;
 
 	// filter out operational rate set not supported by AP, the length of it is 16
-	for (i = 0; i <= 15; i++){
+	for (i = 0; i <= 15; i++) {
 		pOperateMCS[i] = ieee->Regdot11HTOperationalRateSet[i]&pSupportMCS[i];
 	}
 
@@ -965,7 +965,7 @@ void HTOnAssocRsp(struct ieee80211_device *ieee)
 
 	nMaxAMSDUSize = (pPeerHTCap->MaxAMSDUSize == 0) ? 3839 : 7935;
 
-	if (pHTInfo->nAMSDU_MaxSize > nMaxAMSDUSize )
+	if (pHTInfo->nAMSDU_MaxSize > nMaxAMSDUSize)
 		pHTInfo->nCurrent_AMSDU_MaxSize = nMaxAMSDUSize;
 	else
 		pHTInfo->nCurrent_AMSDU_MaxSize = pHTInfo->nAMSDU_MaxSize;
@@ -1009,7 +1009,7 @@ void HTOnAssocRsp(struct ieee80211_device *ieee)
 		pHTInfo->CurrentMPDUDensity = pHTInfo->MPDU_Density;
 	else
 		pHTInfo->CurrentMPDUDensity = pPeerHTCap->MPDUDensity;
-	if (ieee->pairwise_key_type != KEY_TYPE_NA )
+	if (ieee->pairwise_key_type != KEY_TYPE_NA)
 		pHTInfo->CurrentMPDUDensity	= 7; // 8us
 	// Force TX AMSDU
 
-- 
2.16.3

_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel