On Thu, 10 May 2018 20:32:06 -0400
Brian Masney <masneyb@xxxxxxxxxxxxx> wrote:
> On Thu, May 10, 2018 at 08:12:23PM -0400, Brian Masney wrote:
> > Move the tsl2772 driver out of staging and into mainline.
>
> Hey Jonathan,
>
> Here is the .c and .h file to make your review easier. Thanks for all
> your feedback on all of these changes to this driver plus the other 3
> that I've already moved out of staging. I've learned a lot going through
> this process.
I have the great pleasure to say APPLIED!
Congratulations Brian. This has been the longest and most complex driver
cleanup I think we have ever had.
64? patches
930 (+ 366) insertions, 710(+ 368) deletions (brackets for the driver rename
which only sort of counts.
+ this is the 4th driver as you say.
Particularly pleasing is that we no longer have any light sensors in iio staging.
So what's next?
Thanks
Jonathan
>
> Brian
>
>
> // SPDX-License-Identifier: GPL-2.0+
> /*
> * Device driver for monitoring ambient light intensity in (lux) and proximity
> * detection (prox) within the TAOS TSL2571, TSL2671, TMD2671, TSL2771, TMD2771,
> * TSL2572, TSL2672, TMD2672, TSL2772, and TMD2772 devices.
> *
> * Copyright (c) 2012, TAOS Corporation.
> * Copyright (c) 2017-2018 Brian Masney <masneyb@xxxxxxxxxxxxx>
> */
>
> #include <linux/delay.h>
> #include <linux/errno.h>
> #include <linux/i2c.h>
> #include <linux/interrupt.h>
> #include <linux/kernel.h>
> #include <linux/module.h>
> #include <linux/mutex.h>
> #include <linux/slab.h>
> #include <linux/iio/events.h>
> #include <linux/iio/iio.h>
> #include <linux/iio/sysfs.h>
> #include <linux/platform_data/tsl2772.h>
>
> /* Cal defs */
> #define PROX_STAT_CAL 0
> #define PROX_STAT_SAMP 1
> #define MAX_SAMPLES_CAL 200
>
> /* TSL2772 Device ID */
> #define TRITON_ID 0x00
> #define SWORDFISH_ID 0x30
> #define HALIBUT_ID 0x20
>
> /* Lux calculation constants */
> #define TSL2772_LUX_CALC_OVER_FLOW 65535
>
> /*
> * TAOS Register definitions - Note: depending on device, some of these register
> * are not used and the register address is benign.
> */
>
> /* Register offsets */
> #define TSL2772_MAX_CONFIG_REG 16
>
> /* Device Registers and Masks */
> #define TSL2772_CNTRL 0x00
> #define TSL2772_ALS_TIME 0X01
> #define TSL2772_PRX_TIME 0x02
> #define TSL2772_WAIT_TIME 0x03
> #define TSL2772_ALS_MINTHRESHLO 0X04
> #define TSL2772_ALS_MINTHRESHHI 0X05
> #define TSL2772_ALS_MAXTHRESHLO 0X06
> #define TSL2772_ALS_MAXTHRESHHI 0X07
> #define TSL2772_PRX_MINTHRESHLO 0X08
> #define TSL2772_PRX_MINTHRESHHI 0X09
> #define TSL2772_PRX_MAXTHRESHLO 0X0A
> #define TSL2772_PRX_MAXTHRESHHI 0X0B
> #define TSL2772_PERSISTENCE 0x0C
> #define TSL2772_ALS_PRX_CONFIG 0x0D
> #define TSL2772_PRX_COUNT 0x0E
> #define TSL2772_GAIN 0x0F
> #define TSL2772_NOTUSED 0x10
> #define TSL2772_REVID 0x11
> #define TSL2772_CHIPID 0x12
> #define TSL2772_STATUS 0x13
> #define TSL2772_ALS_CHAN0LO 0x14
> #define TSL2772_ALS_CHAN0HI 0x15
> #define TSL2772_ALS_CHAN1LO 0x16
> #define TSL2772_ALS_CHAN1HI 0x17
> #define TSL2772_PRX_LO 0x18
> #define TSL2772_PRX_HI 0x19
>
> /* tsl2772 cmd reg masks */
> #define TSL2772_CMD_REG 0x80
> #define TSL2772_CMD_SPL_FN 0x60
> #define TSL2772_CMD_REPEAT_PROTO 0x00
> #define TSL2772_CMD_AUTOINC_PROTO 0x20
>
> #define TSL2772_CMD_PROX_INT_CLR 0X05
> #define TSL2772_CMD_ALS_INT_CLR 0x06
> #define TSL2772_CMD_PROXALS_INT_CLR 0X07
>
> /* tsl2772 cntrl reg masks */
> #define TSL2772_CNTL_ADC_ENBL 0x02
> #define TSL2772_CNTL_PWR_ON 0x01
>
> /* tsl2772 status reg masks */
> #define TSL2772_STA_ADC_VALID 0x01
> #define TSL2772_STA_PRX_VALID 0x02
> #define TSL2772_STA_ADC_PRX_VALID (TSL2772_STA_ADC_VALID | \
> TSL2772_STA_PRX_VALID)
> #define TSL2772_STA_ALS_INTR 0x10
> #define TSL2772_STA_PRX_INTR 0x20
>
> /* tsl2772 cntrl reg masks */
> #define TSL2772_CNTL_REG_CLEAR 0x00
> #define TSL2772_CNTL_PROX_INT_ENBL 0X20
> #define TSL2772_CNTL_ALS_INT_ENBL 0X10
> #define TSL2772_CNTL_WAIT_TMR_ENBL 0X08
> #define TSL2772_CNTL_PROX_DET_ENBL 0X04
> #define TSL2772_CNTL_PWRON 0x01
> #define TSL2772_CNTL_ALSPON_ENBL 0x03
> #define TSL2772_CNTL_INTALSPON_ENBL 0x13
> #define TSL2772_CNTL_PROXPON_ENBL 0x0F
> #define TSL2772_CNTL_INTPROXPON_ENBL 0x2F
>
> #define TSL2772_ALS_GAIN_TRIM_MIN 250
> #define TSL2772_ALS_GAIN_TRIM_MAX 4000
>
> /* Device family members */
> enum {
> tsl2571,
> tsl2671,
> tmd2671,
> tsl2771,
> tmd2771,
> tsl2572,
> tsl2672,
> tmd2672,
> tsl2772,
> tmd2772
> };
>
> enum {
> TSL2772_CHIP_UNKNOWN = 0,
> TSL2772_CHIP_WORKING = 1,
> TSL2772_CHIP_SUSPENDED = 2
> };
>
> /* Per-device data */
> struct tsl2772_als_info {
> u16 als_ch0;
> u16 als_ch1;
> u16 lux;
> };
>
> struct tsl2772_chip_info {
> int chan_table_elements;
> struct iio_chan_spec channel_with_events[4];
> struct iio_chan_spec channel_without_events[4];
> const struct iio_info *info;
> };
>
> struct tsl2772_chip {
> kernel_ulong_t id;
> struct mutex prox_mutex;
> struct mutex als_mutex;
> struct i2c_client *client;
> u16 prox_data;
> struct tsl2772_als_info als_cur_info;
> struct tsl2772_settings settings;
> struct tsl2772_platform_data *pdata;
> int als_gain_time_scale;
> int als_saturation;
> int tsl2772_chip_status;
> u8 tsl2772_config[TSL2772_MAX_CONFIG_REG];
> const struct tsl2772_chip_info *chip_info;
> const struct iio_info *info;
> s64 event_timestamp;
> /*
> * This structure is intentionally large to accommodate
> * updates via sysfs.
> * Sized to 9 = max 8 segments + 1 termination segment
> */
> struct tsl2772_lux tsl2772_device_lux[TSL2772_MAX_LUX_TABLE_SIZE];
> };
>
> /*
> * Different devices require different coefficents, and these numbers were
> * derived from the 'Lux Equation' section of the various device datasheets.
> * All of these coefficients assume a Glass Attenuation (GA) factor of 1.
> * The coefficients are multiplied by 1000 to avoid floating point operations.
> * The two rows in each table correspond to the Lux1 and Lux2 equations from
> * the datasheets.
> */
> static const struct tsl2772_lux tsl2x71_lux_table[TSL2772_DEF_LUX_TABLE_SZ] = {
> { 53000, 106000 },
> { 31800, 53000 },
> { 0, 0 },
> };
>
> static const struct tsl2772_lux tmd2x71_lux_table[TSL2772_DEF_LUX_TABLE_SZ] = {
> { 24000, 48000 },
> { 14400, 24000 },
> { 0, 0 },
> };
>
> static const struct tsl2772_lux tsl2x72_lux_table[TSL2772_DEF_LUX_TABLE_SZ] = {
> { 60000, 112200 },
> { 37800, 60000 },
> { 0, 0 },
> };
>
> static const struct tsl2772_lux tmd2x72_lux_table[TSL2772_DEF_LUX_TABLE_SZ] = {
> { 20000, 35000 },
> { 12600, 20000 },
> { 0, 0 },
> };
>
> static const struct tsl2772_lux *tsl2772_default_lux_table_group[] = {
> [tsl2571] = tsl2x71_lux_table,
> [tsl2671] = tsl2x71_lux_table,
> [tmd2671] = tmd2x71_lux_table,
> [tsl2771] = tsl2x71_lux_table,
> [tmd2771] = tmd2x71_lux_table,
> [tsl2572] = tsl2x72_lux_table,
> [tsl2672] = tsl2x72_lux_table,
> [tmd2672] = tmd2x72_lux_table,
> [tsl2772] = tsl2x72_lux_table,
> [tmd2772] = tmd2x72_lux_table,
> };
>
> static const struct tsl2772_settings tsl2772_default_settings = {
> .als_time = 255, /* 2.72 / 2.73 ms */
> .als_gain = 0,
> .prox_time = 255, /* 2.72 / 2.73 ms */
> .prox_gain = 0,
> .wait_time = 255,
> .als_prox_config = 0,
> .als_gain_trim = 1000,
> .als_cal_target = 150,
> .als_persistence = 1,
> .als_interrupt_en = false,
> .als_thresh_low = 200,
> .als_thresh_high = 256,
> .prox_persistence = 1,
> .prox_interrupt_en = false,
> .prox_thres_low = 0,
> .prox_thres_high = 512,
> .prox_max_samples_cal = 30,
> .prox_pulse_count = 8,
> .prox_diode = TSL2772_DIODE1,
> .prox_power = TSL2772_100_mA
> };
>
> static const s16 tsl2772_als_gain[] = {
> 1,
> 8,
> 16,
> 120
> };
>
> static const s16 tsl2772_prox_gain[] = {
> 1,
> 2,
> 4,
> 8
> };
>
> static const int tsl2772_int_time_avail[][6] = {
> [tsl2571] = { 0, 2720, 0, 2720, 0, 696000 },
> [tsl2671] = { 0, 2720, 0, 2720, 0, 696000 },
> [tmd2671] = { 0, 2720, 0, 2720, 0, 696000 },
> [tsl2771] = { 0, 2720, 0, 2720, 0, 696000 },
> [tmd2771] = { 0, 2720, 0, 2720, 0, 696000 },
> [tsl2572] = { 0, 2730, 0, 2730, 0, 699000 },
> [tsl2672] = { 0, 2730, 0, 2730, 0, 699000 },
> [tmd2672] = { 0, 2730, 0, 2730, 0, 699000 },
> [tsl2772] = { 0, 2730, 0, 2730, 0, 699000 },
> [tmd2772] = { 0, 2730, 0, 2730, 0, 699000 },
> };
>
> static int tsl2772_int_calibscale_avail[] = { 1, 8, 16, 120 };
>
> static int tsl2772_prox_calibscale_avail[] = { 1, 2, 4, 8 };
>
> /* Channel variations */
> enum {
> ALS,
> PRX,
> ALSPRX,
> PRX2,
> ALSPRX2,
> };
>
> static const u8 device_channel_config[] = {
> [tsl2571] = ALS,
> [tsl2671] = PRX,
> [tmd2671] = PRX,
> [tsl2771] = ALSPRX,
> [tmd2771] = ALSPRX,
> [tsl2572] = ALS,
> [tsl2672] = PRX2,
> [tmd2672] = PRX2,
> [tsl2772] = ALSPRX2,
> [tmd2772] = ALSPRX2
> };
>
> static int tsl2772_read_status(struct tsl2772_chip *chip)
> {
> int ret;
>
> ret = i2c_smbus_read_byte_data(chip->client,
> TSL2772_CMD_REG | TSL2772_STATUS);
> if (ret < 0)
> dev_err(&chip->client->dev,
> "%s: failed to read STATUS register: %d\n", __func__,
> ret);
>
> return ret;
> }
>
> static int tsl2772_write_control_reg(struct tsl2772_chip *chip, u8 data)
> {
> int ret;
>
> ret = i2c_smbus_write_byte_data(chip->client,
> TSL2772_CMD_REG | TSL2772_CNTRL, data);
> if (ret < 0) {
> dev_err(&chip->client->dev,
> "%s: failed to write to control register %x: %d\n",
> __func__, data, ret);
> }
>
> return ret;
> }
>
> static int tsl2772_read_autoinc_regs(struct tsl2772_chip *chip, int lower_reg,
> int upper_reg)
> {
> u8 buf[2];
> int ret;
>
> ret = i2c_smbus_write_byte(chip->client,
> TSL2772_CMD_REG | TSL2772_CMD_AUTOINC_PROTO |
> lower_reg);
> if (ret < 0) {
> dev_err(&chip->client->dev,
> "%s: failed to enable auto increment protocol: %d\n",
> __func__, ret);
> return ret;
> }
>
> ret = i2c_smbus_read_byte_data(chip->client,
> TSL2772_CMD_REG | lower_reg);
> if (ret < 0) {
> dev_err(&chip->client->dev,
> "%s: failed to read from register %x: %d\n", __func__,
> lower_reg, ret);
> return ret;
> }
> buf[0] = ret;
>
> ret = i2c_smbus_read_byte_data(chip->client,
> TSL2772_CMD_REG | upper_reg);
> if (ret < 0) {
> dev_err(&chip->client->dev,
> "%s: failed to read from register %x: %d\n", __func__,
> upper_reg, ret);
> return ret;
> }
> buf[1] = ret;
>
> ret = i2c_smbus_write_byte(chip->client,
> TSL2772_CMD_REG | TSL2772_CMD_REPEAT_PROTO |
> lower_reg);
> if (ret < 0) {
> dev_err(&chip->client->dev,
> "%s: failed to enable repeated byte protocol: %d\n",
> __func__, ret);
> return ret;
> }
>
> return le16_to_cpup((const __le16 *)&buf[0]);
> }
>
> /**
> * tsl2772_get_lux() - Reads and calculates current lux value.
> * @indio_dev: pointer to IIO device
> *
> * The raw ch0 and ch1 values of the ambient light sensed in the last
> * integration cycle are read from the device. The raw values are multiplied
> * by a device-specific scale factor, and divided by the integration time and
> * device gain. The code supports multiple lux equations through the lux table
> * coefficients. A lux gain trim is applied to each lux equation, and then the
> * maximum lux within the interval 0..65535 is selected.
> */
> static int tsl2772_get_lux(struct iio_dev *indio_dev)
> {
> struct tsl2772_chip *chip = iio_priv(indio_dev);
> struct tsl2772_lux *p;
> int max_lux, ret;
> bool overflow;
>
> mutex_lock(&chip->als_mutex);
>
> if (chip->tsl2772_chip_status != TSL2772_CHIP_WORKING) {
> dev_err(&chip->client->dev, "%s: device is not enabled\n",
> __func__);
> ret = -EBUSY;
> goto out_unlock;
> }
>
> ret = tsl2772_read_status(chip);
> if (ret < 0)
> goto out_unlock;
>
> if (!(ret & TSL2772_STA_ADC_VALID)) {
> dev_err(&chip->client->dev,
> "%s: data not valid yet\n", __func__);
> ret = chip->als_cur_info.lux; /* return LAST VALUE */
> goto out_unlock;
> }
>
> ret = tsl2772_read_autoinc_regs(chip, TSL2772_ALS_CHAN0LO,
> TSL2772_ALS_CHAN0HI);
> if (ret < 0)
> goto out_unlock;
> chip->als_cur_info.als_ch0 = ret;
>
> ret = tsl2772_read_autoinc_regs(chip, TSL2772_ALS_CHAN1LO,
> TSL2772_ALS_CHAN1HI);
> if (ret < 0)
> goto out_unlock;
> chip->als_cur_info.als_ch1 = ret;
>
> if (chip->als_cur_info.als_ch0 >= chip->als_saturation) {
> max_lux = TSL2772_LUX_CALC_OVER_FLOW;
> goto update_struct_with_max_lux;
> }
>
> if (!chip->als_cur_info.als_ch0) {
> /* have no data, so return LAST VALUE */
> ret = chip->als_cur_info.lux;
> goto out_unlock;
> }
>
> max_lux = 0;
> overflow = false;
> for (p = (struct tsl2772_lux *)chip->tsl2772_device_lux; p->ch0 != 0;
> p++) {
> int lux;
>
> lux = ((chip->als_cur_info.als_ch0 * p->ch0) -
> (chip->als_cur_info.als_ch1 * p->ch1)) /
> chip->als_gain_time_scale;
>
> /*
> * The als_gain_trim can have a value within the range 250..4000
> * and is a multiplier for the lux. A trim of 1000 makes no
> * changes to the lux, less than 1000 scales it down, and
> * greater than 1000 scales it up.
> */
> lux = (lux * chip->settings.als_gain_trim) / 1000;
>
> if (lux > TSL2772_LUX_CALC_OVER_FLOW) {
> overflow = true;
> continue;
> }
>
> max_lux = max(max_lux, lux);
> }
>
> if (overflow && max_lux == 0)
> max_lux = TSL2772_LUX_CALC_OVER_FLOW;
>
> update_struct_with_max_lux:
> chip->als_cur_info.lux = max_lux;
> ret = max_lux;
>
> out_unlock:
> mutex_unlock(&chip->als_mutex);
>
> return ret;
> }
>
> /**
> * tsl2772_get_prox() - Reads proximity data registers and updates
> * chip->prox_data.
> *
> * @indio_dev: pointer to IIO device
> */
> static int tsl2772_get_prox(struct iio_dev *indio_dev)
> {
> struct tsl2772_chip *chip = iio_priv(indio_dev);
> int ret;
>
> mutex_lock(&chip->prox_mutex);
>
> ret = tsl2772_read_status(chip);
> if (ret < 0)
> goto prox_poll_err;
>
> switch (chip->id) {
> case tsl2571:
> case tsl2671:
> case tmd2671:
> case tsl2771:
> case tmd2771:
> if (!(ret & TSL2772_STA_ADC_VALID)) {
> ret = -EINVAL;
> goto prox_poll_err;
> }
> break;
> case tsl2572:
> case tsl2672:
> case tmd2672:
> case tsl2772:
> case tmd2772:
> if (!(ret & TSL2772_STA_PRX_VALID)) {
> ret = -EINVAL;
> goto prox_poll_err;
> }
> break;
> }
>
> ret = tsl2772_read_autoinc_regs(chip, TSL2772_PRX_LO, TSL2772_PRX_HI);
> if (ret < 0)
> goto prox_poll_err;
> chip->prox_data = ret;
>
> prox_poll_err:
> mutex_unlock(&chip->prox_mutex);
>
> return ret;
> }
>
> /**
> * tsl2772_defaults() - Populates the device nominal operating parameters
> * with those provided by a 'platform' data struct or
> * with prefined defaults.
> *
> * @chip: pointer to device structure.
> */
> static void tsl2772_defaults(struct tsl2772_chip *chip)
> {
> /* If Operational settings defined elsewhere.. */
> if (chip->pdata && chip->pdata->platform_default_settings)
> memcpy(&chip->settings, chip->pdata->platform_default_settings,
> sizeof(tsl2772_default_settings));
> else
> memcpy(&chip->settings, &tsl2772_default_settings,
> sizeof(tsl2772_default_settings));
>
> /* Load up the proper lux table. */
> if (chip->pdata && chip->pdata->platform_lux_table[0].ch0 != 0)
> memcpy(chip->tsl2772_device_lux,
> chip->pdata->platform_lux_table,
> sizeof(chip->pdata->platform_lux_table));
> else
> memcpy(chip->tsl2772_device_lux,
> tsl2772_default_lux_table_group[chip->id],
> TSL2772_DEFAULT_TABLE_BYTES);
> }
>
> /**
> * tsl2772_als_calibrate() - Obtain single reading and calculate
> * the als_gain_trim.
> *
> * @indio_dev: pointer to IIO device
> */
> static int tsl2772_als_calibrate(struct iio_dev *indio_dev)
> {
> struct tsl2772_chip *chip = iio_priv(indio_dev);
> int ret, lux_val;
>
> ret = i2c_smbus_read_byte_data(chip->client,
> TSL2772_CMD_REG | TSL2772_CNTRL);
> if (ret < 0) {
> dev_err(&chip->client->dev,
> "%s: failed to read from the CNTRL register\n",
> __func__);
> return ret;
> }
>
> if ((ret & (TSL2772_CNTL_ADC_ENBL | TSL2772_CNTL_PWR_ON))
> != (TSL2772_CNTL_ADC_ENBL | TSL2772_CNTL_PWR_ON)) {
> dev_err(&chip->client->dev,
> "%s: Device is not powered on and/or ADC is not enabled\n",
> __func__);
> return -EINVAL;
> } else if ((ret & TSL2772_STA_ADC_VALID) != TSL2772_STA_ADC_VALID) {
> dev_err(&chip->client->dev,
> "%s: The two ADC channels have not completed an integration cycle\n",
> __func__);
> return -ENODATA;
> }
>
> lux_val = tsl2772_get_lux(indio_dev);
> if (lux_val < 0) {
> dev_err(&chip->client->dev,
> "%s: failed to get lux\n", __func__);
> return lux_val;
> }
>
> ret = (chip->settings.als_cal_target * chip->settings.als_gain_trim) /
> lux_val;
> if (ret < TSL2772_ALS_GAIN_TRIM_MIN || ret > TSL2772_ALS_GAIN_TRIM_MAX)
> return -ERANGE;
>
> chip->settings.als_gain_trim = ret;
>
> return ret;
> }
>
> static int tsl2772_chip_on(struct iio_dev *indio_dev)
> {
> struct tsl2772_chip *chip = iio_priv(indio_dev);
> int ret, i, als_count, als_time_us;
> u8 *dev_reg, reg_val;
>
> /* Non calculated parameters */
> chip->tsl2772_config[TSL2772_ALS_TIME] = chip->settings.als_time;
> chip->tsl2772_config[TSL2772_PRX_TIME] = chip->settings.prox_time;
> chip->tsl2772_config[TSL2772_WAIT_TIME] = chip->settings.wait_time;
> chip->tsl2772_config[TSL2772_ALS_PRX_CONFIG] =
> chip->settings.als_prox_config;
>
> chip->tsl2772_config[TSL2772_ALS_MINTHRESHLO] =
> (chip->settings.als_thresh_low) & 0xFF;
> chip->tsl2772_config[TSL2772_ALS_MINTHRESHHI] =
> (chip->settings.als_thresh_low >> 8) & 0xFF;
> chip->tsl2772_config[TSL2772_ALS_MAXTHRESHLO] =
> (chip->settings.als_thresh_high) & 0xFF;
> chip->tsl2772_config[TSL2772_ALS_MAXTHRESHHI] =
> (chip->settings.als_thresh_high >> 8) & 0xFF;
> chip->tsl2772_config[TSL2772_PERSISTENCE] =
> (chip->settings.prox_persistence & 0xFF) << 4 |
> (chip->settings.als_persistence & 0xFF);
>
> chip->tsl2772_config[TSL2772_PRX_COUNT] =
> chip->settings.prox_pulse_count;
> chip->tsl2772_config[TSL2772_PRX_MINTHRESHLO] =
> (chip->settings.prox_thres_low) & 0xFF;
> chip->tsl2772_config[TSL2772_PRX_MINTHRESHHI] =
> (chip->settings.prox_thres_low >> 8) & 0xFF;
> chip->tsl2772_config[TSL2772_PRX_MAXTHRESHLO] =
> (chip->settings.prox_thres_high) & 0xFF;
> chip->tsl2772_config[TSL2772_PRX_MAXTHRESHHI] =
> (chip->settings.prox_thres_high >> 8) & 0xFF;
>
> /* and make sure we're not already on */
> if (chip->tsl2772_chip_status == TSL2772_CHIP_WORKING) {
> /* if forcing a register update - turn off, then on */
> dev_info(&chip->client->dev, "device is already enabled\n");
> return -EINVAL;
> }
>
> /* Set the gain based on tsl2772_settings struct */
> chip->tsl2772_config[TSL2772_GAIN] =
> (chip->settings.als_gain & 0xFF) |
> ((chip->settings.prox_gain & 0xFF) << 2) |
> (chip->settings.prox_diode << 4) |
> (chip->settings.prox_power << 6);
>
> /* set chip time scaling and saturation */
> als_count = 256 - chip->settings.als_time;
> als_time_us = als_count * tsl2772_int_time_avail[chip->id][3];
> chip->als_saturation = als_count * 768; /* 75% of full scale */
> chip->als_gain_time_scale = als_time_us *
> tsl2772_als_gain[chip->settings.als_gain];
>
> /*
> * TSL2772 Specific power-on / adc enable sequence
> * Power on the device 1st.
> */
> ret = tsl2772_write_control_reg(chip, TSL2772_CNTL_PWR_ON);
> if (ret < 0)
> return ret;
>
> /*
> * Use the following shadow copy for our delay before enabling ADC.
> * Write all the registers.
> */
> for (i = 0, dev_reg = chip->tsl2772_config;
> i < TSL2772_MAX_CONFIG_REG; i++) {
> int reg = TSL2772_CMD_REG + i;
>
> ret = i2c_smbus_write_byte_data(chip->client, reg,
> *dev_reg++);
> if (ret < 0) {
> dev_err(&chip->client->dev,
> "%s: failed to write to register %x: %d\n",
> __func__, reg, ret);
> return ret;
> }
> }
>
> /* Power-on settling time */
> usleep_range(3000, 3500);
>
> reg_val = TSL2772_CNTL_PWR_ON | TSL2772_CNTL_ADC_ENBL |
> TSL2772_CNTL_PROX_DET_ENBL;
> if (chip->settings.als_interrupt_en)
> reg_val |= TSL2772_CNTL_ALS_INT_ENBL;
> if (chip->settings.prox_interrupt_en)
> reg_val |= TSL2772_CNTL_PROX_INT_ENBL;
>
> ret = tsl2772_write_control_reg(chip, reg_val);
> if (ret < 0)
> return ret;
>
> ret = i2c_smbus_write_byte(chip->client,
> TSL2772_CMD_REG | TSL2772_CMD_SPL_FN |
> TSL2772_CMD_PROXALS_INT_CLR);
> if (ret < 0) {
> dev_err(&chip->client->dev,
> "%s: failed to clear interrupt status: %d\n",
> __func__, ret);
> return ret;
> }
>
> chip->tsl2772_chip_status = TSL2772_CHIP_WORKING;
>
> return ret;
> }
>
> static int tsl2772_chip_off(struct iio_dev *indio_dev)
> {
> struct tsl2772_chip *chip = iio_priv(indio_dev);
>
> /* turn device off */
> chip->tsl2772_chip_status = TSL2772_CHIP_SUSPENDED;
> return tsl2772_write_control_reg(chip, 0x00);
> }
>
> /**
> * tsl2772_invoke_change - power cycle the device to implement the user
> * parameters
> * @indio_dev: pointer to IIO device
> *
> * Obtain and lock both ALS and PROX resources, determine and save device state
> * (On/Off), cycle device to implement updated parameter, put device back into
> * proper state, and unlock resource.
> */
> static int tsl2772_invoke_change(struct iio_dev *indio_dev)
> {
> struct tsl2772_chip *chip = iio_priv(indio_dev);
> int device_status = chip->tsl2772_chip_status;
> int ret;
>
> mutex_lock(&chip->als_mutex);
> mutex_lock(&chip->prox_mutex);
>
> if (device_status == TSL2772_CHIP_WORKING) {
> ret = tsl2772_chip_off(indio_dev);
> if (ret < 0)
> goto unlock;
> }
>
> ret = tsl2772_chip_on(indio_dev);
>
> unlock:
> mutex_unlock(&chip->prox_mutex);
> mutex_unlock(&chip->als_mutex);
>
> return ret;
> }
>
> static int tsl2772_prox_cal(struct iio_dev *indio_dev)
> {
> struct tsl2772_chip *chip = iio_priv(indio_dev);
> int prox_history[MAX_SAMPLES_CAL + 1];
> int i, ret, mean, max, sample_sum;
>
> if (chip->settings.prox_max_samples_cal < 1 ||
> chip->settings.prox_max_samples_cal > MAX_SAMPLES_CAL)
> return -EINVAL;
>
> for (i = 0; i < chip->settings.prox_max_samples_cal; i++) {
> usleep_range(15000, 17500);
> ret = tsl2772_get_prox(indio_dev);
> if (ret < 0)
> return ret;
>
> prox_history[i] = chip->prox_data;
> }
>
> sample_sum = 0;
> max = INT_MIN;
> for (i = 0; i < chip->settings.prox_max_samples_cal; i++) {
> sample_sum += prox_history[i];
> max = max(max, prox_history[i]);
> }
> mean = sample_sum / chip->settings.prox_max_samples_cal;
>
> chip->settings.prox_thres_high = (max << 1) - mean;
>
> return tsl2772_invoke_change(indio_dev);
> }
>
> static int tsl2772_read_avail(struct iio_dev *indio_dev,
> struct iio_chan_spec const *chan,
> const int **vals, int *type, int *length,
> long mask)
> {
> struct tsl2772_chip *chip = iio_priv(indio_dev);
>
> switch (mask) {
> case IIO_CHAN_INFO_CALIBSCALE:
> if (chan->type == IIO_INTENSITY) {
> *length = ARRAY_SIZE(tsl2772_int_calibscale_avail);
> *vals = tsl2772_int_calibscale_avail;
> } else {
> *length = ARRAY_SIZE(tsl2772_prox_calibscale_avail);
> *vals = tsl2772_prox_calibscale_avail;
> }
> *type = IIO_VAL_INT;
> return IIO_AVAIL_LIST;
> case IIO_CHAN_INFO_INT_TIME:
> *length = ARRAY_SIZE(tsl2772_int_time_avail[chip->id]);
> *vals = tsl2772_int_time_avail[chip->id];
> *type = IIO_VAL_INT_PLUS_MICRO;
> return IIO_AVAIL_RANGE;
> }
>
> return -EINVAL;
> }
>
> static ssize_t in_illuminance0_target_input_show(struct device *dev,
> struct device_attribute *attr,
> char *buf)
> {
> struct tsl2772_chip *chip = iio_priv(dev_to_iio_dev(dev));
>
> return snprintf(buf, PAGE_SIZE, "%d\n", chip->settings.als_cal_target);
> }
>
> static ssize_t in_illuminance0_target_input_store(struct device *dev,
> struct device_attribute *attr,
> const char *buf, size_t len)
> {
> struct iio_dev *indio_dev = dev_to_iio_dev(dev);
> struct tsl2772_chip *chip = iio_priv(indio_dev);
> u16 value;
> int ret;
>
> if (kstrtou16(buf, 0, &value))
> return -EINVAL;
>
> chip->settings.als_cal_target = value;
> ret = tsl2772_invoke_change(indio_dev);
> if (ret < 0)
> return ret;
>
> return len;
> }
>
> static ssize_t in_illuminance0_calibrate_store(struct device *dev,
> struct device_attribute *attr,
> const char *buf, size_t len)
> {
> struct iio_dev *indio_dev = dev_to_iio_dev(dev);
> bool value;
> int ret;
>
> if (kstrtobool(buf, &value) || !value)
> return -EINVAL;
>
> ret = tsl2772_als_calibrate(indio_dev);
> if (ret < 0)
> return ret;
>
> ret = tsl2772_invoke_change(indio_dev);
> if (ret < 0)
> return ret;
>
> return len;
> }
>
> static ssize_t in_illuminance0_lux_table_show(struct device *dev,
> struct device_attribute *attr,
> char *buf)
> {
> struct tsl2772_chip *chip = iio_priv(dev_to_iio_dev(dev));
> int i = 0;
> int offset = 0;
>
> while (i < TSL2772_MAX_LUX_TABLE_SIZE) {
> offset += snprintf(buf + offset, PAGE_SIZE, "%u,%u,",
> chip->tsl2772_device_lux[i].ch0,
> chip->tsl2772_device_lux[i].ch1);
> if (chip->tsl2772_device_lux[i].ch0 == 0) {
> /*
> * We just printed the first "0" entry.
> * Now get rid of the extra "," and break.
> */
> offset--;
> break;
> }
> i++;
> }
>
> offset += snprintf(buf + offset, PAGE_SIZE, "\n");
> return offset;
> }
>
> static ssize_t in_illuminance0_lux_table_store(struct device *dev,
> struct device_attribute *attr,
> const char *buf, size_t len)
> {
> struct iio_dev *indio_dev = dev_to_iio_dev(dev);
> struct tsl2772_chip *chip = iio_priv(indio_dev);
> int value[ARRAY_SIZE(chip->tsl2772_device_lux) * 2 + 1];
> int n, ret;
>
> get_options(buf, ARRAY_SIZE(value), value);
>
> /*
> * We now have an array of ints starting at value[1], and
> * enumerated by value[0].
> * We expect each group of two ints to be one table entry,
> * and the last table entry is all 0.
> */
> n = value[0];
> if ((n % 2) || n < 4 ||
> n > ((ARRAY_SIZE(chip->tsl2772_device_lux) - 1) * 2))
> return -EINVAL;
>
> if ((value[(n - 1)] | value[n]) != 0)
> return -EINVAL;
>
> if (chip->tsl2772_chip_status == TSL2772_CHIP_WORKING) {
> ret = tsl2772_chip_off(indio_dev);
> if (ret < 0)
> return ret;
> }
>
> /* Zero out the table */
> memset(chip->tsl2772_device_lux, 0, sizeof(chip->tsl2772_device_lux));
> memcpy(chip->tsl2772_device_lux, &value[1], (value[0] * 4));
>
> ret = tsl2772_invoke_change(indio_dev);
> if (ret < 0)
> return ret;
>
> return len;
> }
>
> static ssize_t in_proximity0_calibrate_store(struct device *dev,
> struct device_attribute *attr,
> const char *buf, size_t len)
> {
> struct iio_dev *indio_dev = dev_to_iio_dev(dev);
> bool value;
> int ret;
>
> if (kstrtobool(buf, &value) || !value)
> return -EINVAL;
>
> ret = tsl2772_prox_cal(indio_dev);
> if (ret < 0)
> return ret;
>
> ret = tsl2772_invoke_change(indio_dev);
> if (ret < 0)
> return ret;
>
> return len;
> }
>
> static int tsl2772_read_interrupt_config(struct iio_dev *indio_dev,
> const struct iio_chan_spec *chan,
> enum iio_event_type type,
> enum iio_event_direction dir)
> {
> struct tsl2772_chip *chip = iio_priv(indio_dev);
>
> if (chan->type == IIO_INTENSITY)
> return chip->settings.als_interrupt_en;
> else
> return chip->settings.prox_interrupt_en;
> }
>
> static int tsl2772_write_interrupt_config(struct iio_dev *indio_dev,
> const struct iio_chan_spec *chan,
> enum iio_event_type type,
> enum iio_event_direction dir,
> int val)
> {
> struct tsl2772_chip *chip = iio_priv(indio_dev);
>
> if (chan->type == IIO_INTENSITY)
> chip->settings.als_interrupt_en = val ? true : false;
> else
> chip->settings.prox_interrupt_en = val ? true : false;
>
> return tsl2772_invoke_change(indio_dev);
> }
>
> static int tsl2772_write_event_value(struct iio_dev *indio_dev,
> const struct iio_chan_spec *chan,
> enum iio_event_type type,
> enum iio_event_direction dir,
> enum iio_event_info info,
> int val, int val2)
> {
> struct tsl2772_chip *chip = iio_priv(indio_dev);
> int ret = -EINVAL, count, persistence;
> u8 time;
>
> switch (info) {
> case IIO_EV_INFO_VALUE:
> if (chan->type == IIO_INTENSITY) {
> switch (dir) {
> case IIO_EV_DIR_RISING:
> chip->settings.als_thresh_high = val;
> ret = 0;
> break;
> case IIO_EV_DIR_FALLING:
> chip->settings.als_thresh_low = val;
> ret = 0;
> break;
> default:
> break;
> }
> } else {
> switch (dir) {
> case IIO_EV_DIR_RISING:
> chip->settings.prox_thres_high = val;
> ret = 0;
> break;
> case IIO_EV_DIR_FALLING:
> chip->settings.prox_thres_low = val;
> ret = 0;
> break;
> default:
> break;
> }
> }
> break;
> case IIO_EV_INFO_PERIOD:
> if (chan->type == IIO_INTENSITY)
> time = chip->settings.als_time;
> else
> time = chip->settings.prox_time;
>
> count = 256 - time;
> persistence = ((val * 1000000) + val2) /
> (count * tsl2772_int_time_avail[chip->id][3]);
>
> if (chan->type == IIO_INTENSITY) {
> /* ALS filter values are 1, 2, 3, 5, 10, 15, ..., 60 */
> if (persistence > 3)
> persistence = (persistence / 5) + 3;
>
> chip->settings.als_persistence = persistence;
> } else {
> chip->settings.prox_persistence = persistence;
> }
>
> ret = 0;
> break;
> default:
> break;
> }
>
> if (ret < 0)
> return ret;
>
> return tsl2772_invoke_change(indio_dev);
> }
>
> static int tsl2772_read_event_value(struct iio_dev *indio_dev,
> const struct iio_chan_spec *chan,
> enum iio_event_type type,
> enum iio_event_direction dir,
> enum iio_event_info info,
> int *val, int *val2)
> {
> struct tsl2772_chip *chip = iio_priv(indio_dev);
> int filter_delay, persistence;
> u8 time;
>
> switch (info) {
> case IIO_EV_INFO_VALUE:
> if (chan->type == IIO_INTENSITY) {
> switch (dir) {
> case IIO_EV_DIR_RISING:
> *val = chip->settings.als_thresh_high;
> return IIO_VAL_INT;
> case IIO_EV_DIR_FALLING:
> *val = chip->settings.als_thresh_low;
> return IIO_VAL_INT;
> default:
> return -EINVAL;
> }
> } else {
> switch (dir) {
> case IIO_EV_DIR_RISING:
> *val = chip->settings.prox_thres_high;
> return IIO_VAL_INT;
> case IIO_EV_DIR_FALLING:
> *val = chip->settings.prox_thres_low;
> return IIO_VAL_INT;
> default:
> return -EINVAL;
> }
> }
> break;
> case IIO_EV_INFO_PERIOD:
> if (chan->type == IIO_INTENSITY) {
> time = chip->settings.als_time;
> persistence = chip->settings.als_persistence;
>
> /* ALS filter values are 1, 2, 3, 5, 10, 15, ..., 60 */
> if (persistence > 3)
> persistence = (persistence - 3) * 5;
> } else {
> time = chip->settings.prox_time;
> persistence = chip->settings.prox_persistence;
> }
>
> filter_delay = persistence * (256 - time) *
> tsl2772_int_time_avail[chip->id][3];
>
> *val = filter_delay / 1000000;
> *val2 = filter_delay % 1000000;
> return IIO_VAL_INT_PLUS_MICRO;
> default:
> return -EINVAL;
> }
> }
>
> static int tsl2772_read_raw(struct iio_dev *indio_dev,
> struct iio_chan_spec const *chan,
> int *val,
> int *val2,
> long mask)
> {
> struct tsl2772_chip *chip = iio_priv(indio_dev);
>
> switch (mask) {
> case IIO_CHAN_INFO_PROCESSED:
> switch (chan->type) {
> case IIO_LIGHT:
> tsl2772_get_lux(indio_dev);
> *val = chip->als_cur_info.lux;
> return IIO_VAL_INT;
> default:
> return -EINVAL;
> }
> case IIO_CHAN_INFO_RAW:
> switch (chan->type) {
> case IIO_INTENSITY:
> tsl2772_get_lux(indio_dev);
> if (chan->channel == 0)
> *val = chip->als_cur_info.als_ch0;
> else
> *val = chip->als_cur_info.als_ch1;
> return IIO_VAL_INT;
> case IIO_PROXIMITY:
> tsl2772_get_prox(indio_dev);
> *val = chip->prox_data;
> return IIO_VAL_INT;
> default:
> return -EINVAL;
> }
> break;
> case IIO_CHAN_INFO_CALIBSCALE:
> if (chan->type == IIO_LIGHT)
> *val = tsl2772_als_gain[chip->settings.als_gain];
> else
> *val = tsl2772_prox_gain[chip->settings.prox_gain];
> return IIO_VAL_INT;
> case IIO_CHAN_INFO_CALIBBIAS:
> *val = chip->settings.als_gain_trim;
> return IIO_VAL_INT;
> case IIO_CHAN_INFO_INT_TIME:
> *val = 0;
> *val2 = (256 - chip->settings.als_time) *
> tsl2772_int_time_avail[chip->id][3];
> return IIO_VAL_INT_PLUS_MICRO;
> default:
> return -EINVAL;
> }
> }
>
> static int tsl2772_write_raw(struct iio_dev *indio_dev,
> struct iio_chan_spec const *chan,
> int val,
> int val2,
> long mask)
> {
> struct tsl2772_chip *chip = iio_priv(indio_dev);
>
> switch (mask) {
> case IIO_CHAN_INFO_CALIBSCALE:
> if (chan->type == IIO_INTENSITY) {
> switch (val) {
> case 1:
> chip->settings.als_gain = 0;
> break;
> case 8:
> chip->settings.als_gain = 1;
> break;
> case 16:
> chip->settings.als_gain = 2;
> break;
> case 120:
> chip->settings.als_gain = 3;
> break;
> default:
> return -EINVAL;
> }
> } else {
> switch (val) {
> case 1:
> chip->settings.prox_gain = 0;
> break;
> case 2:
> chip->settings.prox_gain = 1;
> break;
> case 4:
> chip->settings.prox_gain = 2;
> break;
> case 8:
> chip->settings.prox_gain = 3;
> break;
> default:
> return -EINVAL;
> }
> }
> break;
> case IIO_CHAN_INFO_CALIBBIAS:
> if (val < TSL2772_ALS_GAIN_TRIM_MIN ||
> val > TSL2772_ALS_GAIN_TRIM_MAX)
> return -EINVAL;
>
> chip->settings.als_gain_trim = val;
> break;
> case IIO_CHAN_INFO_INT_TIME:
> if (val != 0 || val2 < tsl2772_int_time_avail[chip->id][1] ||
> val2 > tsl2772_int_time_avail[chip->id][5])
> return -EINVAL;
>
> chip->settings.als_time = 256 -
> (val2 / tsl2772_int_time_avail[chip->id][3]);
> break;
> default:
> return -EINVAL;
> }
>
> return tsl2772_invoke_change(indio_dev);
> }
>
> static DEVICE_ATTR_RW(in_illuminance0_target_input);
>
> static DEVICE_ATTR_WO(in_illuminance0_calibrate);
>
> static DEVICE_ATTR_WO(in_proximity0_calibrate);
>
> static DEVICE_ATTR_RW(in_illuminance0_lux_table);
>
> /* Use the default register values to identify the Taos device */
> static int tsl2772_device_id_verif(int id, int target)
> {
> switch (target) {
> case tsl2571:
> case tsl2671:
> case tsl2771:
> return (id & 0xf0) == TRITON_ID;
> case tmd2671:
> case tmd2771:
> return (id & 0xf0) == HALIBUT_ID;
> case tsl2572:
> case tsl2672:
> case tmd2672:
> case tsl2772:
> case tmd2772:
> return (id & 0xf0) == SWORDFISH_ID;
> }
>
> return -EINVAL;
> }
>
> static irqreturn_t tsl2772_event_handler(int irq, void *private)
> {
> struct iio_dev *indio_dev = private;
> struct tsl2772_chip *chip = iio_priv(indio_dev);
> s64 timestamp = iio_get_time_ns(indio_dev);
> int ret;
>
> ret = tsl2772_read_status(chip);
> if (ret < 0)
> return IRQ_HANDLED;
>
> /* What type of interrupt do we need to process */
> if (ret & TSL2772_STA_PRX_INTR) {
> iio_push_event(indio_dev,
> IIO_UNMOD_EVENT_CODE(IIO_PROXIMITY,
> 0,
> IIO_EV_TYPE_THRESH,
> IIO_EV_DIR_EITHER),
> timestamp);
> }
>
> if (ret & TSL2772_STA_ALS_INTR) {
> iio_push_event(indio_dev,
> IIO_UNMOD_EVENT_CODE(IIO_LIGHT,
> 0,
> IIO_EV_TYPE_THRESH,
> IIO_EV_DIR_EITHER),
> timestamp);
> }
>
> ret = i2c_smbus_write_byte(chip->client,
> TSL2772_CMD_REG | TSL2772_CMD_SPL_FN |
> TSL2772_CMD_PROXALS_INT_CLR);
> if (ret < 0)
> dev_err(&chip->client->dev,
> "%s: failed to clear interrupt status: %d\n",
> __func__, ret);
>
> return IRQ_HANDLED;
> }
>
> static struct attribute *tsl2772_ALS_device_attrs[] = {
> &dev_attr_in_illuminance0_target_input.attr,
> &dev_attr_in_illuminance0_calibrate.attr,
> &dev_attr_in_illuminance0_lux_table.attr,
> NULL
> };
>
> static struct attribute *tsl2772_PRX_device_attrs[] = {
> &dev_attr_in_proximity0_calibrate.attr,
> NULL
> };
>
> static struct attribute *tsl2772_ALSPRX_device_attrs[] = {
> &dev_attr_in_illuminance0_target_input.attr,
> &dev_attr_in_illuminance0_calibrate.attr,
> &dev_attr_in_illuminance0_lux_table.attr,
> NULL
> };
>
> static struct attribute *tsl2772_PRX2_device_attrs[] = {
> &dev_attr_in_proximity0_calibrate.attr,
> NULL
> };
>
> static struct attribute *tsl2772_ALSPRX2_device_attrs[] = {
> &dev_attr_in_illuminance0_target_input.attr,
> &dev_attr_in_illuminance0_calibrate.attr,
> &dev_attr_in_illuminance0_lux_table.attr,
> &dev_attr_in_proximity0_calibrate.attr,
> NULL
> };
>
> static const struct attribute_group tsl2772_device_attr_group_tbl[] = {
> [ALS] = {
> .attrs = tsl2772_ALS_device_attrs,
> },
> [PRX] = {
> .attrs = tsl2772_PRX_device_attrs,
> },
> [ALSPRX] = {
> .attrs = tsl2772_ALSPRX_device_attrs,
> },
> [PRX2] = {
> .attrs = tsl2772_PRX2_device_attrs,
> },
> [ALSPRX2] = {
> .attrs = tsl2772_ALSPRX2_device_attrs,
> },
> };
>
> #define TSL2772_DEVICE_INFO(type)[type] = \
> { \
> .attrs = &tsl2772_device_attr_group_tbl[type], \
> .read_raw = &tsl2772_read_raw, \
> .read_avail = &tsl2772_read_avail, \
> .write_raw = &tsl2772_write_raw, \
> .read_event_value = &tsl2772_read_event_value, \
> .write_event_value = &tsl2772_write_event_value, \
> .read_event_config = &tsl2772_read_interrupt_config, \
> .write_event_config = &tsl2772_write_interrupt_config, \
> }
>
> static const struct iio_info tsl2772_device_info[] = {
> TSL2772_DEVICE_INFO(ALS),
> TSL2772_DEVICE_INFO(PRX),
> TSL2772_DEVICE_INFO(ALSPRX),
> TSL2772_DEVICE_INFO(PRX2),
> TSL2772_DEVICE_INFO(ALSPRX2),
> };
>
> static const struct iio_event_spec tsl2772_events[] = {
> {
> .type = IIO_EV_TYPE_THRESH,
> .dir = IIO_EV_DIR_RISING,
> .mask_separate = BIT(IIO_EV_INFO_VALUE),
> }, {
> .type = IIO_EV_TYPE_THRESH,
> .dir = IIO_EV_DIR_FALLING,
> .mask_separate = BIT(IIO_EV_INFO_VALUE),
> }, {
> .type = IIO_EV_TYPE_THRESH,
> .dir = IIO_EV_DIR_EITHER,
> .mask_separate = BIT(IIO_EV_INFO_PERIOD) |
> BIT(IIO_EV_INFO_ENABLE),
> },
> };
>
> static const struct tsl2772_chip_info tsl2772_chip_info_tbl[] = {
> [ALS] = {
> .channel_with_events = {
> {
> .type = IIO_LIGHT,
> .indexed = 1,
> .channel = 0,
> .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
> }, {
> .type = IIO_INTENSITY,
> .indexed = 1,
> .channel = 0,
> .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
> BIT(IIO_CHAN_INFO_INT_TIME) |
> BIT(IIO_CHAN_INFO_CALIBSCALE) |
> BIT(IIO_CHAN_INFO_CALIBBIAS),
> .info_mask_separate_available =
> BIT(IIO_CHAN_INFO_INT_TIME) |
> BIT(IIO_CHAN_INFO_CALIBSCALE),
> .event_spec = tsl2772_events,
> .num_event_specs = ARRAY_SIZE(tsl2772_events),
> }, {
> .type = IIO_INTENSITY,
> .indexed = 1,
> .channel = 1,
> },
> },
> .channel_without_events = {
> {
> .type = IIO_LIGHT,
> .indexed = 1,
> .channel = 0,
> .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
> }, {
> .type = IIO_INTENSITY,
> .indexed = 1,
> .channel = 0,
> .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
> BIT(IIO_CHAN_INFO_INT_TIME) |
> BIT(IIO_CHAN_INFO_CALIBSCALE) |
> BIT(IIO_CHAN_INFO_CALIBBIAS),
> .info_mask_separate_available =
> BIT(IIO_CHAN_INFO_INT_TIME) |
> BIT(IIO_CHAN_INFO_CALIBSCALE),
> }, {
> .type = IIO_INTENSITY,
> .indexed = 1,
> .channel = 1,
> },
> },
> .chan_table_elements = 3,
> .info = &tsl2772_device_info[ALS],
> },
> [PRX] = {
> .channel_with_events = {
> {
> .type = IIO_PROXIMITY,
> .indexed = 1,
> .channel = 0,
> .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
> .event_spec = tsl2772_events,
> .num_event_specs = ARRAY_SIZE(tsl2772_events),
> },
> },
> .channel_without_events = {
> {
> .type = IIO_PROXIMITY,
> .indexed = 1,
> .channel = 0,
> .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
> },
> },
> .chan_table_elements = 1,
> .info = &tsl2772_device_info[PRX],
> },
> [ALSPRX] = {
> .channel_with_events = {
> {
> .type = IIO_LIGHT,
> .indexed = 1,
> .channel = 0,
> .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
> }, {
> .type = IIO_INTENSITY,
> .indexed = 1,
> .channel = 0,
> .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
> BIT(IIO_CHAN_INFO_INT_TIME) |
> BIT(IIO_CHAN_INFO_CALIBSCALE) |
> BIT(IIO_CHAN_INFO_CALIBBIAS),
> .info_mask_separate_available =
> BIT(IIO_CHAN_INFO_INT_TIME) |
> BIT(IIO_CHAN_INFO_CALIBSCALE),
> .event_spec = tsl2772_events,
> .num_event_specs = ARRAY_SIZE(tsl2772_events),
> }, {
> .type = IIO_INTENSITY,
> .indexed = 1,
> .channel = 1,
> .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
> }, {
> .type = IIO_PROXIMITY,
> .indexed = 1,
> .channel = 0,
> .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
> .event_spec = tsl2772_events,
> .num_event_specs = ARRAY_SIZE(tsl2772_events),
> },
> },
> .channel_without_events = {
> {
> .type = IIO_LIGHT,
> .indexed = 1,
> .channel = 0,
> .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
> }, {
> .type = IIO_INTENSITY,
> .indexed = 1,
> .channel = 0,
> .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
> BIT(IIO_CHAN_INFO_INT_TIME) |
> BIT(IIO_CHAN_INFO_CALIBSCALE) |
> BIT(IIO_CHAN_INFO_CALIBBIAS),
> .info_mask_separate_available =
> BIT(IIO_CHAN_INFO_INT_TIME) |
> BIT(IIO_CHAN_INFO_CALIBSCALE),
> }, {
> .type = IIO_INTENSITY,
> .indexed = 1,
> .channel = 1,
> .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
> }, {
> .type = IIO_PROXIMITY,
> .indexed = 1,
> .channel = 0,
> .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
> },
> },
> .chan_table_elements = 4,
> .info = &tsl2772_device_info[ALSPRX],
> },
> [PRX2] = {
> .channel_with_events = {
> {
> .type = IIO_PROXIMITY,
> .indexed = 1,
> .channel = 0,
> .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
> BIT(IIO_CHAN_INFO_CALIBSCALE),
> .info_mask_separate_available =
> BIT(IIO_CHAN_INFO_CALIBSCALE),
> .event_spec = tsl2772_events,
> .num_event_specs = ARRAY_SIZE(tsl2772_events),
> },
> },
> .channel_without_events = {
> {
> .type = IIO_PROXIMITY,
> .indexed = 1,
> .channel = 0,
> .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
> BIT(IIO_CHAN_INFO_CALIBSCALE),
> .info_mask_separate_available =
> BIT(IIO_CHAN_INFO_CALIBSCALE),
> },
> },
> .chan_table_elements = 1,
> .info = &tsl2772_device_info[PRX2],
> },
> [ALSPRX2] = {
> .channel_with_events = {
> {
> .type = IIO_LIGHT,
> .indexed = 1,
> .channel = 0,
> .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
> }, {
> .type = IIO_INTENSITY,
> .indexed = 1,
> .channel = 0,
> .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
> BIT(IIO_CHAN_INFO_INT_TIME) |
> BIT(IIO_CHAN_INFO_CALIBSCALE) |
> BIT(IIO_CHAN_INFO_CALIBBIAS),
> .info_mask_separate_available =
> BIT(IIO_CHAN_INFO_INT_TIME) |
> BIT(IIO_CHAN_INFO_CALIBSCALE),
> .event_spec = tsl2772_events,
> .num_event_specs = ARRAY_SIZE(tsl2772_events),
> }, {
> .type = IIO_INTENSITY,
> .indexed = 1,
> .channel = 1,
> .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
> }, {
> .type = IIO_PROXIMITY,
> .indexed = 1,
> .channel = 0,
> .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
> BIT(IIO_CHAN_INFO_CALIBSCALE),
> .info_mask_separate_available =
> BIT(IIO_CHAN_INFO_CALIBSCALE),
> .event_spec = tsl2772_events,
> .num_event_specs = ARRAY_SIZE(tsl2772_events),
> },
> },
> .channel_without_events = {
> {
> .type = IIO_LIGHT,
> .indexed = 1,
> .channel = 0,
> .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
> }, {
> .type = IIO_INTENSITY,
> .indexed = 1,
> .channel = 0,
> .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
> BIT(IIO_CHAN_INFO_INT_TIME) |
> BIT(IIO_CHAN_INFO_CALIBSCALE) |
> BIT(IIO_CHAN_INFO_CALIBBIAS),
> .info_mask_separate_available =
> BIT(IIO_CHAN_INFO_INT_TIME) |
> BIT(IIO_CHAN_INFO_CALIBSCALE),
> }, {
> .type = IIO_INTENSITY,
> .indexed = 1,
> .channel = 1,
> .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
> }, {
> .type = IIO_PROXIMITY,
> .indexed = 1,
> .channel = 0,
> .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
> BIT(IIO_CHAN_INFO_CALIBSCALE),
> .info_mask_separate_available =
> BIT(IIO_CHAN_INFO_CALIBSCALE),
> },
> },
> .chan_table_elements = 4,
> .info = &tsl2772_device_info[ALSPRX2],
> },
> };
>
> static int tsl2772_probe(struct i2c_client *clientp,
> const struct i2c_device_id *id)
> {
> struct iio_dev *indio_dev;
> struct tsl2772_chip *chip;
> int ret;
>
> indio_dev = devm_iio_device_alloc(&clientp->dev, sizeof(*chip));
> if (!indio_dev)
> return -ENOMEM;
>
> chip = iio_priv(indio_dev);
> chip->client = clientp;
> i2c_set_clientdata(clientp, indio_dev);
>
> ret = i2c_smbus_read_byte_data(chip->client,
> TSL2772_CMD_REG | TSL2772_CHIPID);
> if (ret < 0)
> return ret;
>
> if (tsl2772_device_id_verif(ret, id->driver_data) <= 0) {
> dev_info(&chip->client->dev,
> "%s: i2c device found does not match expected id\n",
> __func__);
> return -EINVAL;
> }
>
> ret = i2c_smbus_write_byte(clientp, TSL2772_CMD_REG | TSL2772_CNTRL);
> if (ret < 0) {
> dev_err(&clientp->dev,
> "%s: Failed to write to CMD register: %d\n",
> __func__, ret);
> return ret;
> }
>
> mutex_init(&chip->als_mutex);
> mutex_init(&chip->prox_mutex);
>
> chip->tsl2772_chip_status = TSL2772_CHIP_UNKNOWN;
> chip->pdata = dev_get_platdata(&clientp->dev);
> chip->id = id->driver_data;
> chip->chip_info =
> &tsl2772_chip_info_tbl[device_channel_config[id->driver_data]];
>
> indio_dev->info = chip->chip_info->info;
> indio_dev->dev.parent = &clientp->dev;
> indio_dev->modes = INDIO_DIRECT_MODE;
> indio_dev->name = chip->client->name;
> indio_dev->num_channels = chip->chip_info->chan_table_elements;
>
> if (clientp->irq) {
> indio_dev->channels = chip->chip_info->channel_with_events;
>
> ret = devm_request_threaded_irq(&clientp->dev, clientp->irq,
> NULL,
> &tsl2772_event_handler,
> IRQF_TRIGGER_FALLING |
> IRQF_ONESHOT,
> "TSL2772_event",
> indio_dev);
> if (ret) {
> dev_err(&clientp->dev,
> "%s: irq request failed\n", __func__);
> return ret;
> }
> } else {
> indio_dev->channels = chip->chip_info->channel_without_events;
> }
>
> tsl2772_defaults(chip);
> ret = tsl2772_chip_on(indio_dev);
> if (ret < 0)
> return ret;
>
> ret = iio_device_register(indio_dev);
> if (ret) {
> tsl2772_chip_off(indio_dev);
> dev_err(&clientp->dev,
> "%s: iio registration failed\n", __func__);
> return ret;
> }
>
> return 0;
> }
>
> static int tsl2772_suspend(struct device *dev)
> {
> struct iio_dev *indio_dev = dev_get_drvdata(dev);
>
> return tsl2772_chip_off(indio_dev);
> }
>
> static int tsl2772_resume(struct device *dev)
> {
> struct iio_dev *indio_dev = dev_get_drvdata(dev);
>
> return tsl2772_chip_on(indio_dev);
> }
>
> static int tsl2772_remove(struct i2c_client *client)
> {
> struct iio_dev *indio_dev = i2c_get_clientdata(client);
>
> tsl2772_chip_off(indio_dev);
>
> iio_device_unregister(indio_dev);
>
> return 0;
> }
>
> static const struct i2c_device_id tsl2772_idtable[] = {
> { "tsl2571", tsl2571 },
> { "tsl2671", tsl2671 },
> { "tmd2671", tmd2671 },
> { "tsl2771", tsl2771 },
> { "tmd2771", tmd2771 },
> { "tsl2572", tsl2572 },
> { "tsl2672", tsl2672 },
> { "tmd2672", tmd2672 },
> { "tsl2772", tsl2772 },
> { "tmd2772", tmd2772 },
> {}
> };
>
> MODULE_DEVICE_TABLE(i2c, tsl2772_idtable);
>
> static const struct of_device_id tsl2772_of_match[] = {
> { .compatible = "amstaos,tsl2571" },
> { .compatible = "amstaos,tsl2671" },
> { .compatible = "amstaos,tmd2671" },
> { .compatible = "amstaos,tsl2771" },
> { .compatible = "amstaos,tmd2771" },
> { .compatible = "amstaos,tsl2572" },
> { .compatible = "amstaos,tsl2672" },
> { .compatible = "amstaos,tmd2672" },
> { .compatible = "amstaos,tsl2772" },
> { .compatible = "amstaos,tmd2772" },
> {}
> };
> MODULE_DEVICE_TABLE(of, tsl2772_of_match);
>
> static const struct dev_pm_ops tsl2772_pm_ops = {
> .suspend = tsl2772_suspend,
> .resume = tsl2772_resume,
> };
>
> static struct i2c_driver tsl2772_driver = {
> .driver = {
> .name = "tsl2772",
> .of_match_table = tsl2772_of_match,
> .pm = &tsl2772_pm_ops,
> },
> .id_table = tsl2772_idtable,
> .probe = tsl2772_probe,
> .remove = tsl2772_remove,
> };
>
> module_i2c_driver(tsl2772_driver);
>
> MODULE_AUTHOR("J. August Brenner <Jon.Brenner@xxxxxxx>");
> MODULE_AUTHOR("Brian Masney <masneyb@xxxxxxxxxxxxx>");
> MODULE_DESCRIPTION("TAOS tsl2772 ambient and proximity light sensor driver");
> MODULE_LICENSE("GPL");
>
>
>
>
> /* SPDX-License-Identifier: GPL-2.0+ */
> /*
> * Device driver for monitoring ambient light intensity (lux)
> * and proximity (prox) within the TAOS TSL2772 family of devices.
> *
> * Copyright (c) 2012, TAOS Corporation.
> * Copyright (c) 2017-2018 Brian Masney <masneyb@xxxxxxxxxxxxx>
> */
>
> #ifndef __TSL2772_H
> #define __TSL2772_H
>
> struct tsl2772_lux {
> unsigned int ch0;
> unsigned int ch1;
> };
>
> /* Max number of segments allowable in LUX table */
> #define TSL2772_MAX_LUX_TABLE_SIZE 6
> /* The default LUX tables all have 3 elements. */
> #define TSL2772_DEF_LUX_TABLE_SZ 3
> #define TSL2772_DEFAULT_TABLE_BYTES (sizeof(struct tsl2772_lux) * \
> TSL2772_DEF_LUX_TABLE_SZ)
>
> /* Proximity diode to use */
> #define TSL2772_DIODE0 0x01
> #define TSL2772_DIODE1 0x02
> #define TSL2772_DIODE_BOTH 0x03
>
> /* LED Power */
> #define TSL2772_100_mA 0x00
> #define TSL2772_50_mA 0x01
> #define TSL2772_25_mA 0x02
> #define TSL2772_13_mA 0x03
>
> /**
> * struct tsl2772_settings - Settings for the tsl2772 driver
> * @als_time: Integration time of the ALS channel ADCs in 2.73 ms
> * increments. Total integration time is
> * (256 - als_time) * 2.73.
> * @als_gain: Index into the tsl2772_als_gain array.
> * @als_gain_trim: Default gain trim to account for aperture effects.
> * @wait_time: Time between proximity and ALS cycles in 2.73
> * periods.
> * @prox_time: Integration time of the proximity ADC in 2.73 ms
> * increments. Total integration time is
> * (256 - prx_time) * 2.73.
> * @prox_gain: Index into the tsl2772_prx_gain array.
> * @als_prox_config: The value of the ALS / Proximity configuration
> * register.
> * @als_cal_target: Known external ALS reading for calibration.
> * @als_persistence: H/W Filters, Number of 'out of limits' ALS readings.
> * @als_interrupt_en: Enable/Disable ALS interrupts
> * @als_thresh_low: CH0 'low' count to trigger interrupt.
> * @als_thresh_high: CH0 'high' count to trigger interrupt.
> * @prox_persistence: H/W Filters, Number of 'out of limits' proximity
> * readings.
> * @prox_interrupt_en: Enable/Disable proximity interrupts.
> * @prox_thres_low: Low threshold proximity detection.
> * @prox_thres_high: High threshold proximity detection.
> * @prox_pulse_count: Number if proximity emitter pulses.
> * @prox_max_samples_cal: The number of samples that are taken when performing
> * a proximity calibration.
> * @prox_diode Which diode(s) to use for driving the external
> * LED(s) for proximity sensing.
> * @prox_power The amount of power to use for the external LED(s).
> */
> struct tsl2772_settings {
> int als_time;
> int als_gain;
> int als_gain_trim;
> int wait_time;
> int prox_time;
> int prox_gain;
> int als_prox_config;
> int als_cal_target;
> u8 als_persistence;
> bool als_interrupt_en;
> int als_thresh_low;
> int als_thresh_high;
> u8 prox_persistence;
> bool prox_interrupt_en;
> int prox_thres_low;
> int prox_thres_high;
> int prox_pulse_count;
> int prox_max_samples_cal;
> int prox_diode;
> int prox_power;
> };
>
> /**
> * struct tsl2772_platform_data - Platform callback, glass and defaults
> * @platform_lux_table: Device specific glass coefficents
> * @platform_default_settings: Device specific power on defaults
> */
> struct tsl2772_platform_data {
> struct tsl2772_lux platform_lux_table[TSL2772_MAX_LUX_TABLE_SIZE];
> struct tsl2772_settings *platform_default_settings;
> };
>
> #endif /* __TSL2772_H */
> --
> To unsubscribe from this list: send the line "unsubscribe linux-iio" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
