Hi Philipp,
Thanks.
On Wed 09 May 2018 at 08:53, Philipp Zabel wrote:
On Mon, 2018-05-07 at 17:21 +0100, Rui Miguel Silva wrote:
This patch adds the device tree nodes for csi, video
multiplexer and mipi-csi
besides the graph connecting the necessary endpoints to make
the media capture
entities to work in imx7 Warp board.
Also add the pin control related with the mipi_csi in that
board.
Signed-off-by: Rui Miguel Silva <rui.silva@xxxxxxxxxx>
---
arch/arm/boot/dts/imx7s-warp.dts | 78
++++++++++++++++++++++++++++++++
arch/arm/boot/dts/imx7s.dtsi | 28 ++++++++++++
2 files changed, 106 insertions(+)
diff --git a/arch/arm/boot/dts/imx7s-warp.dts
b/arch/arm/boot/dts/imx7s-warp.dts
index 8a30b148534d..ffd170ae925a 100644
--- a/arch/arm/boot/dts/imx7s-warp.dts
+++ b/arch/arm/boot/dts/imx7s-warp.dts
@@ -310,6 +310,77 @@
status = "okay";
};
+&gpr {
+ csi_mux {
+ compatible = "video-mux";
+ mux-controls = <&mux 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ csi_mux_from_parallel_sensor: endpoint {
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ csi_mux_from_mipi_vc0: endpoint {
+ remote-endpoint =
<&mipi_vc0_to_csi_mux>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ csi_mux_to_csi: endpoint {
+ remote-endpoint =
<&csi_from_csi_mux>;
+ };
+ };
+ };
+};
+
+&csi {
+ status = "okay";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
Same comment as for the binding docs, since the CSI only has one
port,
it doesn't have to be numbered.
ack.
+
+ csi_from_csi_mux: endpoint {
+ remote-endpoint = <&csi_mux_to_csi>;
+ };
+ };
+};
+
+&mipi_csi {
+ clock-frequency = <166000000>;
+ status = "okay";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ fsl,csis-hs-settle = <3>;
+
+ port@0 {
+ reg = <0>;
+
+ mipi_from_sensor: endpoint {
+ remote-endpoint = <&ov2680_to_mipi>;
+ data-lanes = <1>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ mipi_vc0_to_csi_mux: endpoint {
+ remote-endpoint =
<&csi_mux_from_mipi_vc0>;
+ };
+ };
+};
+
&wdog1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_wdog>;
@@ -357,6 +428,13 @@
>;
};
+ pinctrl_mipi_csi: mipi_csi {
+ fsl,pins = <
+ MX7D_PAD_LPSR_GPIO1_IO03__GPIO1_IO3
0x14
This is the ov2680 reset GPIO? I think this belongs into patch
12.
Yes, you are right.
+ MX7D_PAD_ENET1_RGMII_TD0__GPIO7_IO6
0x14
What is this GPIO used for?
MKBUS_RESET and totally unrelated. I will remove it. Thanks for
notice this.
---
Cheers,
Rui
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
