On Tue, May 01, 2018 at 05:56:32PM +0000, Sridhar Pitchai wrote:
> When Linux runs as a guest VM in Hyper-V and Hyper-V adds the virtual PCI
> bus to the guest, Hyper-V always provides unique PCI domain.
>
> commit 4a9b0933bdfc ("PCI: hv: Use device serial number as PCI domain")
> overrode unique domain with the serial number of the first device added to
> the virtual PCI bus.
>
> The reason for that patch was to have a consistent and short name for the
> device, but Hyper-V doesn't provide unique serial numbers. Using non-unique
> serial numbers as domain IDs leads to duplicate device addresses, which
> causes PCI bus registration to fail.
>
> commit 0c195567a8f6 ("netvsc: transparent VF management") avoids the need
> for commit 4a9b0933bdfc ("PCI: hv: Use device serial number as PCI
> domain"). When scripts were used to configure VF devices, the name of
> the VF needed to be consistent and short, but with commit 0c195567a8f6
> ("netvsc: transparent VF management") all the setup is done in the kernel,
> and we do not need to maintain consistent name.
>
> Revert commit 4a9b0933bdfc ("PCI: hv: Use device serial number as PCI
> domain") so we can reliably support multiple devices being assigned to
> a guest.
>
> This revert should only be backported to kernels that contain commit
> 0c195567a8f6 ("netvsc: transparent VF management").
I removed this last paragraph, the information is in the stable tag
below.
> Fixes: 4a9b0933bdfc ("PCI: hv: Use device serial number as PCI domain")
> Signed-off-by: Sridhar Pitchai <sridhar.pitchai@xxxxxxxxxxxxx>
> Cc: stable@xxxxxxxxxxxxxxx # v4.14+
> Reviewed-by: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
>
> ---
> Changes in v8:
> * fix the commit comment. [Lorenzo Pieralisi, Bjorn Helgaas]
> ---
> drivers/pci/host/pci-hyperv.c | 11 -----------
> 1 file changed, 11 deletions(-)
Applied to pci/hv for v4.18, thanks.
Lorenzo
> diff --git a/drivers/pci/host/pci-hyperv.c b/drivers/pci/host/pci-hyperv.c
> index 2faf38eab785..ac67e56e451a 100644
> --- a/drivers/pci/host/pci-hyperv.c
> +++ b/drivers/pci/host/pci-hyperv.c
> @@ -1518,17 +1518,6 @@ static struct hv_pci_dev *new_pcichild_device(struct hv_pcibus_device *hbus,
> get_pcichild(hpdev, hv_pcidev_ref_childlist);
> spin_lock_irqsave(&hbus->device_list_lock, flags);
>
> - /*
> - * When a device is being added to the bus, we set the PCI domain
> - * number to be the device serial number, which is non-zero and
> - * unique on the same VM. The serial numbers start with 1, and
> - * increase by 1 for each device. So device names including this
> - * can have shorter names than based on the bus instance UUID.
> - * Only the first device serial number is used for domain, so the
> - * domain number will not change after the first device is added.
> - */
> - if (list_empty(&hbus->children))
> - hbus->sysdata.domain = desc->ser;
> list_add_tail(&hpdev->list_entry, &hbus->children);
> spin_unlock_irqrestore(&hbus->device_list_lock, flags);
> return hpdev;
> --
> 2.14.1
>
>
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
