This commit moves SDIO related register definitions from header
to source file. There is no need to have those into the header
because they are only being used in specific SDIO code.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@xxxxxxxxx>
---
drivers/staging/ks7010/ks7010_sdio.c | 72 ++++++++++++++++++++++++++++++++++++
drivers/staging/ks7010/ks7010_sdio.h | 69 ----------------------------------
2 files changed, 72 insertions(+), 69 deletions(-)
diff --git a/drivers/staging/ks7010/ks7010_sdio.c b/drivers/staging/ks7010/ks7010_sdio.c
index 99f7b1d..db1b749 100644
--- a/drivers/staging/ks7010/ks7010_sdio.c
+++ b/drivers/staging/ks7010/ks7010_sdio.c
@@ -23,6 +23,78 @@
#include "ks7010_sdio.h"
#define ROM_FILE "ks7010sd.rom"
+
+/* SDIO KeyStream vendor and device */
+#define SDIO_VENDOR_ID_KS_CODE_A 0x005b
+#define SDIO_VENDOR_ID_KS_CODE_B 0x0023
+
+/* Older sources suggest earlier versions were named 7910 or 79xx */
+#define SDIO_DEVICE_ID_KS_7010 0x7910
+
+/* Read/Write Status Register */
+#define READ_STATUS 0x000000
+#define WRITE_STATUS 0x00000C
+enum reg_status_type {
+ REG_STATUS_BUSY,
+ REG_STATUS_IDLE
+};
+
+/* Read Index Register */
+#define READ_INDEX 0x000004
+
+/* Read Data Size Register */
+#define READ_DATA_SIZE 0x000008
+
+/* Write Index Register */
+#define WRITE_INDEX 0x000010
+
+/* Write Status/Read Data Size Register
+ * for network packet (less than 2048 bytes data)
+ */
+#define WSTATUS_RSIZE 0x000014
+#define WSTATUS_MASK 0x80 /* Write Status Register value */
+#define RSIZE_MASK 0x7F /* Read Data Size Register value [10:4] */
+
+/* ARM to SD interrupt Enable */
+#define INT_ENABLE 0x000020
+/* ARM to SD interrupt Pending */
+#define INT_PENDING 0x000024
+
+#define INT_GCR_B BIT(7)
+#define INT_GCR_A BIT(6)
+#define INT_WRITE_STATUS BIT(5)
+#define INT_WRITE_INDEX BIT(4)
+#define INT_WRITE_SIZE BIT(3)
+#define INT_READ_STATUS BIT(2)
+#define INT_READ_INDEX BIT(1)
+#define INT_READ_SIZE BIT(0)
+
+/* General Communication Register A */
+#define GCR_A 0x000028
+enum gen_com_reg_a {
+ GCR_A_INIT,
+ GCR_A_REMAP,
+ GCR_A_RUN
+};
+
+/* General Communication Register B */
+#define GCR_B 0x00002C
+enum gen_com_reg_b {
+ GCR_B_ACTIVE,
+ GCR_B_DOZE
+};
+
+/* Wakeup Register */
+#define WAKEUP 0x008018
+#define WAKEUP_REQ 0x5a
+
+/* AHB Data Window 0x010000-0x01FFFF */
+#define DATA_WINDOW 0x010000
+#define WINDOW_SIZE (64 * 1024)
+
+#define KS7010_IRAM_ADDRESS 0x06000000
+
+
#define KS7010_FUNC_NUM 1
#define KS7010_IO_BLOCK_SIZE 512
#define KS7010_MAX_CLOCK 25000000
diff --git a/drivers/staging/ks7010/ks7010_sdio.h b/drivers/staging/ks7010/ks7010_sdio.h
index 1bcdbe3..95ac86b 100644
--- a/drivers/staging/ks7010/ks7010_sdio.h
+++ b/drivers/staging/ks7010/ks7010_sdio.h
@@ -11,75 +11,6 @@
#ifndef _KS7010_SDIO_H
#define _KS7010_SDIO_H
-/* SDIO KeyStream vendor and device */
-#define SDIO_VENDOR_ID_KS_CODE_A 0x005b
-#define SDIO_VENDOR_ID_KS_CODE_B 0x0023
-/* Older sources suggest earlier versions were named 7910 or 79xx */
-#define SDIO_DEVICE_ID_KS_7010 0x7910
-
-/* Read/Write Status Register */
-#define READ_STATUS 0x000000
-#define WRITE_STATUS 0x00000C
-enum reg_status_type {
- REG_STATUS_BUSY,
- REG_STATUS_IDLE
-};
-
-/* Read Index Register */
-#define READ_INDEX 0x000004
-
-/* Read Data Size Register */
-#define READ_DATA_SIZE 0x000008
-
-/* Write Index Register */
-#define WRITE_INDEX 0x000010
-
-/* Write Status/Read Data Size Register
- * for network packet (less than 2048 bytes data)
- */
-#define WSTATUS_RSIZE 0x000014
-#define WSTATUS_MASK 0x80 /* Write Status Register value */
-#define RSIZE_MASK 0x7F /* Read Data Size Register value [10:4] */
-
-/* ARM to SD interrupt Enable */
-#define INT_ENABLE 0x000020
-/* ARM to SD interrupt Pending */
-#define INT_PENDING 0x000024
-
-#define INT_GCR_B BIT(7)
-#define INT_GCR_A BIT(6)
-#define INT_WRITE_STATUS BIT(5)
-#define INT_WRITE_INDEX BIT(4)
-#define INT_WRITE_SIZE BIT(3)
-#define INT_READ_STATUS BIT(2)
-#define INT_READ_INDEX BIT(1)
-#define INT_READ_SIZE BIT(0)
-
-/* General Communication Register A */
-#define GCR_A 0x000028
-enum gen_com_reg_a {
- GCR_A_INIT,
- GCR_A_REMAP,
- GCR_A_RUN
-};
-
-/* General Communication Register B */
-#define GCR_B 0x00002C
-enum gen_com_reg_b {
- GCR_B_ACTIVE,
- GCR_B_DOZE
-};
-
-/* Wakeup Register */
-#define WAKEUP 0x008018
-#define WAKEUP_REQ 0x5a
-
-/* AHB Data Window 0x010000-0x01FFFF */
-#define DATA_WINDOW 0x010000
-#define WINDOW_SIZE (64 * 1024)
-
-#define KS7010_IRAM_ADDRESS 0x06000000
-
/**
* struct ks_sdio_card - SDIO device data.
*
--
2.7.4
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
