Non-error messages which were printed using WL_ERROR macro
were decreased to WL_NONE (which is a no_printk) or WL_TRACE
level macros. mac80211 callbacks that are not handled by the
driver are printed with WL_ERROR.
Reviewed-by: Roland Vossen <rvossen@xxxxxxxxxxxx>
Reviewed-by: Brett Rudley <brudley@xxxxxxxxxxxx>
Reviewed-by: Henry Ptasinski <henryp@xxxxxxxxxxxx>
Signed-off-by: Arend van Spriel <arend@xxxxxxxxxxxx>
---
drivers/staging/brcm80211/brcmsmac/wl_mac80211.c | 72 ++++++++++-----------
drivers/staging/brcm80211/brcmsmac/wlc_bmac.c | 2 +-
drivers/staging/brcm80211/brcmsmac/wlc_mac80211.c | 2 +-
3 files changed, 37 insertions(+), 39 deletions(-)
diff --git a/drivers/staging/brcm80211/brcmsmac/wl_mac80211.c b/drivers/staging/brcm80211/brcmsmac/wl_mac80211.c
index 7e1dd43..f79d239 100644
--- a/drivers/staging/brcm80211/brcmsmac/wl_mac80211.c
+++ b/drivers/staging/brcm80211/brcmsmac/wl_mac80211.c
@@ -149,6 +149,7 @@ static int wl_ops_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
{
int status;
struct wl_info *wl = hw->priv;
+
WL_LOCK(wl);
if (!wl->pub->up) {
WL_ERROR("ops->tx called while down\n");
@@ -262,8 +263,6 @@ static int wl_ops_config(struct ieee80211_hw *hw, u32 changed)
WL_LOCK(wl);
if (changed & IEEE80211_CONF_CHANGE_LISTEN_INTERVAL) {
- WL_NONE("%s: Setting listen interval to %d\n",
- __func__, conf->listen_interval);
if (wlc_iovar_setint
(wl->wlc, "bcn_li_bcn", conf->listen_interval)) {
WL_ERROR("%s: Error setting listen_interval\n",
@@ -275,13 +274,15 @@ static int wl_ops_config(struct ieee80211_hw *hw, u32 changed)
ASSERT(new_int == conf->listen_interval);
}
if (changed & IEEE80211_CONF_CHANGE_MONITOR)
- WL_NONE("Need to set monitor mode\n");
+ WL_ERROR("%s: change monitor mode: %s (implement)\n", __func__,
+ conf->flags & IEEE80211_CONF_MONITOR ?
+ "true" : "false");
if (changed & IEEE80211_CONF_CHANGE_PS)
- WL_NONE("Need to set Power-save mode\n");
+ WL_ERROR("%s: change power-save mode: %s (implement)\n",
+ __func__, conf->flags & IEEE80211_CONF_PS ?
+ "true" : "false");
if (changed & IEEE80211_CONF_CHANGE_POWER) {
- WL_NONE("%s: Setting tx power to %d dbm\n",
- __func__, conf->power_level);
if (wlc_iovar_setint
(wl->wlc, "qtxpower", conf->power_level * 4)) {
WL_ERROR("%s: Error setting power_level\n", __func__);
@@ -297,10 +298,6 @@ static int wl_ops_config(struct ieee80211_hw *hw, u32 changed)
err = ieee_set_channel(hw, conf->channel, conf->channel_type);
}
if (changed & IEEE80211_CONF_CHANGE_RETRY_LIMITS) {
- WL_NONE("%s: srl %d, lrl %d\n",
- __func__,
- conf->short_frame_max_tx_count,
- conf->long_frame_max_tx_count);
if (wlc_set
(wl->wlc, WLC_SET_SRL,
conf->short_frame_max_tx_count) < 0) {
@@ -333,23 +330,22 @@ wl_ops_bss_info_changed(struct ieee80211_hw *hw,
/* association status changed (associated/disassociated)
* also implies a change in the AID.
*/
- WL_NONE("Associated: %s\n", info->assoc ? "true" : "false");
+ WL_ERROR("%s: %s: %sassociated\n", KBUILD_MODNAME, __func__,
+ info->assoc ? "" : "dis");
wlc_associate_upd(wl->wlc, info->assoc);
}
if (changed & BSS_CHANGED_ERP_CTS_PROT) {
/* CTS protection changed */
- WL_NONE("Use_cts_prot: %s (implement)\n",
+ WL_ERROR("%s: use_cts_prot: %s (implement)\n", __func__,
info->use_cts_prot ? "true" : "false");
}
if (changed & BSS_CHANGED_ERP_PREAMBLE) {
/* preamble changed */
- WL_NONE("Short preamble: %s (implement)\n",
+ WL_ERROR("%s: short preamble: %s (implement)\n", __func__,
info->use_short_preamble ? "true" : "false");
}
if (changed & BSS_CHANGED_ERP_SLOT) {
/* slot timing changed */
- WL_NONE("Changing short slot: %s\n",
- info->use_short_slot ? "true" : "false");
if (info->use_short_slot)
val = 1;
else
@@ -370,57 +366,58 @@ wl_ops_bss_info_changed(struct ieee80211_hw *hw,
}
if (changed & BSS_CHANGED_BASIC_RATES) {
/* Basic rateset changed */
- WL_NONE("Need to change Basic Rates: 0x%x (implement)\n",
- (u32) info->basic_rates);
+ WL_ERROR("%s: Need to change Basic Rates: 0x%x (implement)\n",
+ __func__, (u32) info->basic_rates);
}
if (changed & BSS_CHANGED_BEACON_INT) {
/* Beacon interval changed */
- WL_NONE("Beacon Interval: %d\n",
- info->beacon_int);
+ WL_NONE("%s: Beacon Interval: %d\n",
+ __func__, info->beacon_int);
wlc_set(wl->wlc, WLC_SET_BCNPRD, info->beacon_int);
}
if (changed & BSS_CHANGED_BSSID) {
/* BSSID changed, for whatever reason (IBSS and managed mode) */
- WL_NONE("new BSSID: aid %d bss:%pM\n",
- info->aid, info->bssid);
+ WL_NONE("%s: new BSSID: aid %d bss:%pM\n",
+ __func__, info->aid, info->bssid);
wlc_set_addrmatch(wl->wlc, RCM_BSSID_OFFSET,
info->bssid);
}
if (changed & BSS_CHANGED_BEACON) {
/* Beacon data changed, retrieve new beacon (beaconing modes) */
- WL_NONE("BSS_CHANGED_BEACON\n");
+ WL_ERROR("BSS_CHANGED_BEACON\n");
}
if (changed & BSS_CHANGED_BEACON_ENABLED) {
/* Beaconing should be enabled/disabled (beaconing modes) */
- WL_NONE("Beacon enabled: %s\n",
+ WL_ERROR("Beacon enabled: %s\n",
info->enable_beacon ? "true" : "false");
}
if (changed & BSS_CHANGED_CQM) {
/* Connection quality monitor config changed */
- WL_NONE("BSS_CHANGED_CQM: threshold %d, hys %d\n",
- info->cqm_rssi_thold, info->cqm_rssi_hyst);
+ WL_ERROR("%s: quality monitor: threshold %d, hys %d\n",
+ __func__, info->cqm_rssi_thold, info->cqm_rssi_hyst);
}
if (changed & BSS_CHANGED_IBSS) {
/* IBSS join status changed */
- WL_NONE("BSS_CHANGED_IBSS: %s\n",
+ WL_ERROR("%s: ibss joined: %s (implement)\n", __func__,
info->ibss_joined ? "true" : "false");
}
if (changed & BSS_CHANGED_ARP_FILTER) {
/* Hardware ARP filter address list or state changed */
- WL_NONE("BSS_CHANGED_ARP_FILTER: enabled %s, count %d\n",
- info->arp_filter_enabled ? "true" : "false",
- info->arp_addr_cnt);
+ WL_ERROR("%s: arp filtering: enabled %s count %d (implement)\n",
+ __func__, info->arp_filter_enabled ? "true" : "false",
+ info->arp_addr_cnt);
}
if (changed & BSS_CHANGED_QOS) {
/*
* QoS for this association was enabled/disabled.
* Note that it is only ever disabled for station mode.
*/
- WL_NONE("BSS_CHANGED_QOS: %s\n", info->qos ? "true" : "false");
+ WL_ERROR("%s: qos enabled: %s (implement)\n",
+ __func__, info->qos ? "true" : "false");
}
if (changed & BSS_CHANGED_IDLE) {
/* Idle changed for this BSS/interface */
- WL_NONE("BSS_CHANGED_IDLE: %s\n",
+ WL_NONE("%s: idle status: %s\n", __func__,
info->idle ? "true" : "false");
}
return;
@@ -465,7 +462,7 @@ wl_ops_configure_filter(struct ieee80211_hw *hw,
static int
wl_ops_set_tim(struct ieee80211_hw *hw, struct ieee80211_sta *sta, bool set)
{
- WL_ERROR("%s: Enter\n", __func__);
+ WL_NONE("%s: Enter\n", __func__);
return 0;
}
@@ -646,7 +643,7 @@ static void wl_ops_rfkill_poll(struct ieee80211_hw *hw)
blocked = wlc_check_radio_disabled(wl->wlc);
WL_UNLOCK(wl);
- WL_ERROR("wl: rfkill_poll: %d\n", blocked);
+ WL_NONE("wl: rfkill_poll: %d\n", blocked);
wiphy_rfkill_set_hw_state(wl->pub->ieee_hw->wiphy, blocked);
}
@@ -676,7 +673,7 @@ static const struct ieee80211_ops wl_ops = {
static int wl_set_hint(struct wl_info *wl, char *abbrev)
{
- WL_ERROR("%s: Sending country code %c%c to MAC80211\n",
+ WL_NONE("%s: Sending country code %c%c to MAC80211\n",
__func__, abbrev[0], abbrev[1]);
return regulatory_hint(wl->pub->ieee_hw->wiphy, abbrev);
}
@@ -1532,12 +1529,12 @@ static void BCMFASTPATH wl_dpc(unsigned long data)
static void wl_link_up(struct wl_info *wl, char *ifname)
{
- WL_ERROR("wl%d: link up (%s)\n", wl->pub->unit, ifname);
+ WL_NONE("wl%d: link up (%s)\n", wl->pub->unit, ifname);
}
static void wl_link_down(struct wl_info *wl, char *ifname)
{
- WL_ERROR("wl%d: link down (%s)\n", wl->pub->unit, ifname);
+ WL_NONE("wl%d: link down (%s)\n", wl->pub->unit, ifname);
}
void wl_event(struct wl_info *wl, char *ifname, wlc_event_t *e)
@@ -1885,7 +1882,8 @@ bool wl_rfkill_set_hw_state(struct wl_info *wl)
{
bool blocked = wlc_check_radio_disabled(wl->wlc);
- WL_ERROR("%s: update hw state: blocked=%s\n", __func__, blocked ? "true" : "false");
+ WL_NONE("%s: update hw state: blocked=%s\n", __func__,
+ blocked ? "true" : "false");
wiphy_rfkill_set_hw_state(wl->pub->ieee_hw->wiphy, blocked);
if (blocked)
wiphy_rfkill_start_polling(wl->pub->ieee_hw->wiphy);
diff --git a/drivers/staging/brcm80211/brcmsmac/wlc_bmac.c b/drivers/staging/brcm80211/brcmsmac/wlc_bmac.c
index 8d9aca5..5f0e7e6 100644
--- a/drivers/staging/brcm80211/brcmsmac/wlc_bmac.c
+++ b/drivers/staging/brcm80211/brcmsmac/wlc_bmac.c
@@ -995,7 +995,7 @@ int wlc_bmac_attach(struct wlc_info *wlc, u16 vendor, u16 device, uint unit,
goto fail;
}
- WL_ERROR("%s:: deviceid 0x%x nbands %d board 0x%x macaddr: %s\n",
+ WL_TRACE("%s:: deviceid 0x%x nbands %d board 0x%x macaddr: %s\n",
__func__, wlc_hw->deviceid, wlc_hw->_nbands,
wlc_hw->sih->boardtype, macaddr);
diff --git a/drivers/staging/brcm80211/brcmsmac/wlc_mac80211.c b/drivers/staging/brcm80211/brcmsmac/wlc_mac80211.c
index 41c8c60..5628182 100644
--- a/drivers/staging/brcm80211/brcmsmac/wlc_mac80211.c
+++ b/drivers/staging/brcm80211/brcmsmac/wlc_mac80211.c
@@ -8331,7 +8331,7 @@ void wlc_txflowcontrol(struct wlc_info *wlc, wlc_txq_info_t *qi,
uint prio_bits;
uint cur_bits;
- WL_ERROR("%s: flow control kicks in\n", __func__);
+ WL_TRACE("%s: flow control kicks in\n", __func__);
if (prio == ALLPRIO) {
prio_bits = TXQ_STOP_FOR_PRIOFC_MASK;
--
1.7.1
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
