On Sat, 17 Mar 2018 01:36:21 +0530
Himanshu Jha <himanshujha199640@xxxxxxxxx> wrote:
> Group register definitions with its register field bits to improve
> readability and easy identification. A small comment is also added to
> denote the purpose/functionality of the grouped register definitions.
>
> Signed-off-by: Himanshu Jha <himanshujha199640@xxxxxxxxx>
There was one small issue in here that I fixed up.
Applied, thanks.
Jonathan
> ---
> v2:
> -reordered patch series.
>
> drivers/staging/iio/accel/adis16201.c | 138 +++++++++++++---------------------
> 1 file changed, 54 insertions(+), 84 deletions(-)
>
> diff --git a/drivers/staging/iio/accel/adis16201.c b/drivers/staging/iio/accel/adis16201.c
> index 0c63cd0..8de3f27 100644
> --- a/drivers/staging/iio/accel/adis16201.c
> +++ b/drivers/staging/iio/accel/adis16201.c
> @@ -20,99 +20,69 @@
> #include <linux/iio/buffer.h>
> #include <linux/iio/imu/adis.h>
>
> -#define ADIS16201_STARTUP_DELAY_MS 220
> -
> -#define ADIS16201_FLASH_CNT 0x00
> -
> -#define ADIS16201_SUPPLY_OUT_REG 0x02
> -
> -#define ADIS16201_XACCL_OUT_REG 0x04
> -
> -#define ADIS16201_YACCL_OUT_REG 0x06
> -
> -#define ADIS16201_AUX_ADC_REG 0x08
> -
> -#define ADIS16201_TEMP_OUT_REG 0x0A
> -
> -#define ADIS16201_XINCL_OUT_REG 0x0C
> -
> -#define ADIS16201_YINCL_OUT_REG 0x0E
> -
> -#define ADIS16201_XACCL_OFFS_REG 0x10
> -
> -#define ADIS16201_YACCL_OFFS_REG 0x12
> -
> -#define ADIS16201_XACCL_SCALE_REG 0x14
> -
> -#define ADIS16201_YACCL_SCALE_REG 0x16
> -
> -#define ADIS16201_XINCL_OFFS_REG 0x18
> -
> -#define ADIS16201_YINCL_OFFS_REG 0x1A
> -
> -#define ADIS16201_XINCL_SCALE_REG 0x1C
> -
> -#define ADIS16201_YINCL_SCALE_REG 0x1E
> -
> -#define ADIS16201_ALM_MAG1_REG 0x20
> -
> -#define ADIS16201_ALM_MAG2_REG 0x22
> -
> -#define ADIS16201_ALM_SMPL1_REG 0x24
> -
> -#define ADIS16201_ALM_SMPL2_REG 0x26
> -
> -#define ADIS16201_ALM_CTRL_REG 0x28
> -
> -#define ADIS16201_AUX_DAC_REG 0x30
> -
> -#define ADIS16201_GPIO_CTRL_REG 0x32
> -
> -#define ADIS16201_MSC_CTRL_REG 0x34
> -
> -#define ADIS16201_SMPL_PRD_REG 0x36
> -
> +#define ADIS16201_STARTUP_DELAY_MS 220
> +#define ADIS16201_FLASH_CNT 0x00
> +
> +/* Data Output Register Information */
> +#define ADIS16201_SUPPLY_OUT_REG 0x02
> +#define ADIS16201_XACCL_OUT_REG 0x04
> +#define ADIS16201_YACCL_OUT_REG 0x06
> +#define ADIS16201_AUX_ADC_REG 0x08
> +#define ADIS16201_TEMP_OUT_REG 0x0A
> +#define ADIS16201_XINCL_OUT_REG 0x0C
> +#define ADIS16201_YINCL_OUT_REG 0x0E
> +
> +/* Calibration Register Definition */
> +#define ADIS16201_XACCL_OFFS_REG 0x10
> +#define ADIS16201_YACCL_OFFS_REG 0x12
> +#define ADIS16201_XACCL_SCALE_REG 0x14
> +#define ADIS16201_YACCL_SCALE_REG 0x16
> +#define ADIS16201_XINCL_OFFS_REG 0x18
> +#define ADIS16201_YINCL_OFFS_REG 0x1A
> +#define ADIS16201_XINCL_SCALE_REG 0x1C
> +#define ADIS16201_YINCL_SCALE_REG 0x1E
> +
> +/* Alarm Register Definition */
> +#define ADIS16201_ALM_MAG1_REG 0x20
> +#define ADIS16201_ALM_MAG2_REG 0x22
> +#define ADIS16201_ALM_SMPL1_REG 0x24
> +#define ADIS16201_ALM_SMPL2_REG 0x26
> +#define ADIS16201_ALM_CTRL_REG 0x28
> +
> +#define ADIS16201_AUX_DAC_REG 0x30
> +#define ADIS16201_GPIO_CTRL_REG 0x32
> +#define ADIS16201_SMPL_PRD_REG 0x36
> /* Operation, filter configuration */
> -#define ADIS16201_AVG_CNT_REG 0x38
> -
> -#define ADIS16201_SLP_CNT_REG 0x3A
> -
> -#define ADIS16201_DIAG_STAT_REG 0x3C
> -
> -#define ADIS16201_GLOB_CMD_REG 0x3E
> -
> -
> -#define ADIS16201_MSC_CTRL_SELF_TEST_EN BIT(8)
> +#define ADIS16201_AVG_CNT_REG 0x38
> +#define ADIS16201_SLP_CNT_REG 0x3A
>
> +/* Miscellaneous Control Register Definition */
> +#define ADIS16201_MSC_CTRL_REG 0x34
> +#define ADIS16201_MSC_CTRL_SELF_TEST_EN BIT(8)
In this one case you have spaces when it should be a tab before BIT(8).
I'll fix it.
> /* Data-ready enable: 1 = enabled, 0 = disabled */
> -#define ADIS16201_MSC_CTRL_DATA_RDY_EN BIT(2)
> -
> +#define ADIS16201_MSC_CTRL_DATA_RDY_EN BIT(2)
> /* Data-ready polarity: 1 = active high, 0 = active low */
> -#define ADIS16201_MSC_CTRL_ACTIVE_DATA_RDY_HIGH BIT(1)
> -
> +#define ADIS16201_MSC_CTRL_ACTIVE_DATA_RDY_HIGH BIT(1)
> /* Data-ready line selection: 1 = DIO1, 0 = DIO0 */
> -#define ADIS16201_MSC_CTRL_DATA_RDY_DIO1 BIT(0)
> -
> -
> -#define ADIS16201_DIAG_STAT_ALARM2 BIT(9)
> -
> -#define ADIS16201_DIAG_STAT_ALARM1 BIT(8)
> -
> -#define ADIS16201_DIAG_STAT_SPI_FAIL_BIT 3
> -
> -#define ADIS16201_DIAG_STAT_FLASH_UPT_FAIL_BIT 2
> -
> +#define ADIS16201_MSC_CTRL_DATA_RDY_DIO1 BIT(0)
> +
> +/* Diagnostics System Status Register Definition */
> +#define ADIS16201_DIAG_STAT_REG 0x3C
> +#define ADIS16201_DIAG_STAT_ALARM2 BIT(9)
> +#define ADIS16201_DIAG_STAT_ALARM1 BIT(8)
> +#define ADIS16201_DIAG_STAT_SPI_FAIL_BIT 3
> +#define ADIS16201_DIAG_STAT_FLASH_UPT_FAIL_BIT 2
> /* Power supply above 3.625 V */
> -#define ADIS16201_DIAG_STAT_POWER_HIGH_BIT 1
> -
> +#define ADIS16201_DIAG_STAT_POWER_HIGH_BIT 1
> /* Power supply below 3.15 V */
> -#define ADIS16201_DIAG_STAT_POWER_LOW_BIT 0
> -
> +#define ADIS16201_DIAG_STAT_POWER_LOW_BIT 0
>
> -#define ADIS16201_GLOB_CMD_SW_RESET BIT(7)
> -#define ADIS16201_GLOB_CMD_FACTORY_RESET BIT(1)
> +/* System Command Register Definition */
> +#define ADIS16201_GLOB_CMD_REG 0x3E
> +#define ADIS16201_GLOB_CMD_SW_RESET BIT(7)
> +#define ADIS16201_GLOB_CMD_FACTORY_RESET BIT(1)
>
> -#define ADIS16201_ERROR_ACTIVE BIT(14)
> +#define ADIS16201_ERROR_ACTIVE BIT(14)
>
> enum adis16201_scan {
> ADIS16201_SCAN_ACC_X,
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
